HP 2600n not connecting via Wireless

Hi,
I have a HP 2600n Color Laser Printer connected to my airport extreme. I've used it wirelessly for a year. I changed a print cartridge and it stopped functioning. Basically, it sees the printer via Bonjour but "hangs" while I try to actually Add it. This locks up the system.
The printer works fine directly into the USB. I've unistalled / reinstalled all drivers. I used Print Therapy and Disk Utility to check for errors.
I know others have this same issue http://discussions.apple.com/thread.jspa?threadID=1405299 but, I can't find an answer.
PLEASE help!

I'm shooting in the dark here but how about trying this:
Turn off Airport on your MacBook and connect to the Airport Extreme with an Ethernet cable (I assume your printer is connected via Ethernet as well). Can you add the printer? Can you print when connected like this? Then disconnect the Ethernet cable and turn your MacBook's Airport back on and see if you can still print.
Again, a shot in the dark. My next suggestion would be to do a hard reset of the Airport Extreme. I don't have one so I'm just assuming it can be reset.

Similar Messages

HP Deskjet 3000 does not connect via Wireless to Windows 8.1 any more

Good day. My job requires me to move with my laptop (Asus X54C with NO bluetooth, only wireless) between multiple workplaces. One of these offices has an HP Deskjet 3000 wireless printer, which I used with no problem whatsoever under Windows 8.0 64-bit.I didn't even need to install its drivers, because Windows 8 would instantly recognise the driver's wireless signal.
Then a month ago I decided to update to Windows 8.1: after that, the printer suddenly stopped appearing in my “Network Connections”. I tried to uninstall the drivers and reinstall the 8.1 signed drivers by HP, but to no avail. The printer is recognised and works perfectly with an USB cable. I clearly recall seeing it on the right-hand pane (“Networks”), but since the 8.1 update it isn’t there anymore. The icon in the System Tray tells me that “connections are available”, but I can see no connections at all. In that particular office there is no Internet connection or other wireless connections apart from the HP printer (that however I cannot connect to). I'd like to point out that the wireless function is OK because a colleague of mine can still print using his Mac's Airport connection.
I have already posted in the Windows 8 (Microsoft Answers) Forum, but nobody has ever answered. You can find the thread here: http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/winows-81-not-finding-wireless-...
Any ideas?
Thanks in advance.

Hi,
Please reinstall the following package:
http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63287.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

All in one C4580 printer - not connecting via wireless

hi
i've purchased this to have a wireless printer but i can only print via the USB port, which isnt much use! i've tried turning off all firewalls but still no luck. My wireless router works fine all round the house but i cannot get the printer to talk to my laptop. It also 'fails' the print test at the last stage!
Can anyone help as i dont know what else to try....?
This question was solved.
View Solution.

The Hewlett-Packard company has released a firmware update for the issue that occurs on the Photosmart C4500 series and Photosmart C4400 series. The updates are currently available for use on the Windows OS.
The following links can be used to find the software for the two affected products.
Critical Update to Prevent and Unresponsive State for Photosmart C4400 Series
Critical Update to Prevent and Unresponsive State for Photosmart C4500 Series
HP Product Expert for the Officejet Pro X Series.
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!

TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work). "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
That will let you select the "turn on Bluetooth" icon.

IPod nano does not connect with wireless earphone via bluetooth transmitters.

My iPod nano(6th) can not connect with wireless earphone via bluetooth transmitter.
I want to know which is wrong iPod nano or bluetooth transmitter...Now I tried with i10s because I thought previous one (motolora) might be wrong.
But both can not connect.

Sounds good. Hopefully they can provide you with an accurate answer.
B-rock

Connecting via wireless & blue square?

hello
I'm connecting to the www via my router and when it's not possible to connect I seem to be connecting via a blue square on the toolbar ,anyway what is this and can it be switched off because I only want to connect via wireless router or hotspot
Thanks

Hey macbookair,
The Blue square means GPRS: http://docs.info.apple.com/article.html?artnum=306795
Try the Wi-Fi tips listed here: http://support.apple.com/kb/TS1398?viewlocale=en_US
Forgetting the network or resetting network settings will probably take care of it.
If the iPhone still cannot join the Wi-Fi network give us a little more information about the specific wireless router you are connecting to and the security being used. Also Include the number of characters in the network password.
Jason

After recent apple update MBP will not connect to wireless internet

After running recent Security and Airport upgrades my Mac Book Pro (Intel) will not connect to wireless home router supplied by Verizon (GTE) and several public wi-fi's. Cannot get IP but sees networks. My iMac PPC still works fine. Prior to upgrade everything worked fine at home and abroad to other public wi-fi's. MBP still connects at work with AppleBase wireless. Can the upgrade be removed? Is there a simple fix? Should I wait for apple to fix this and break something else.... If not broken don't fix it..

I'm having similar issues.
I have 2 MBP's. The newest one is about 1 month old and has never been able to connect to a WPA network. The older MBP is 20 months old and was originally installed with Tiger and gradually updated via Software Update and a retail copy of Leopard and subsequent Software Update updates to 10.5.2. Interestingly, this MBP was always able to access my WPA network until I decided to do an erase and install. I installed the retail copy of Leopard and was subsequently unable to access my WPA network. So, I went back to my Tiger install disks - but I'm guessing that whatever Leopard did *possibly* updated the firmware of the airport card as, even under Tiger, I could not access my WPA network (yes, I agree it seems unlikely that an OS update would/should update firmware but I am grasping at straws).
Trying to further understand the problem , I noted that the Network utility in System preferences would always show either a connection error or a connection timeout whenever I attempted to join my WPA network. I turned on syslog in my router and attempted to rejoin the network and saw the following errors:
<150>Apr 30 21:25:17 Vigor: WLAN_DBG - MLME Disassoc MAC 0:1e:ffffffc2:ffffffc0:ffffff9c:3b
<150>Apr 30 21:25:17 Vigor: WLAN_DBG - MLME Disassoc MAC 0:1e:ffffffc2:ffffffc0:ffffff9c:3b
<150>Apr 30 21:25:17 Vigor: WLAN_DBG - athgdeauthclient 0:1e:c2:c0:9c:3b
<150>Apr 30 21:25:17 Vigor: WLAN_DBG - Wpatimeouthandler
<150>Apr 30 21:25:14 Vigor: WLAN_DBG - WPA handshake timeout, disconnect 0:1e:c2:c0:9c:3b
<150>Apr 30 21:25:14 Vigor: WLAN_DBG - Wpatimeouthandler
<150>Apr 30 21:25:13 Vigor: WLAN_DBG - send 3rd packet in 4-way handshake
<150>Apr 30 21:25:13 Vigor: WLAN_DBG - RSN, Send key to: 0:1e:c2:c0:9c:3b
<150>Apr 30 21:25:13 Vigor: WLAN_DBG - Wpatimeouthandler
<150>Apr 30 21:25:12 Vigor: WLAN_DBG - send 3rd packet in 4-way handshake
<150>Apr 30 21:25:12 Vigor: WLAN_DBG - RSN, Send key to: 0:1e:c2:c0:9c:3b
<150>Apr 30 21:25:12 Vigor: WLAN_DBG - Wpatimeouthandler
<150>Apr 30 21:25:11 Vigor: WLAN_DBG - send 3rd packet in 4-way handshake
<150>Apr 30 21:25:11 Vigor: WLAN_DBG - RSN, Send key to: 0:1e:c2:c0:9c:3b
<150>Apr 30 21:25:11 Vigor: WLAN_DBG - Rx message 2 in 4-way handshake
<150>Apr 30 21:25:11 Vigor: WLAN_DBG - parseEAPOLKey
<150>Apr 30 21:25:11 Vigor: WLAN_DBG - EAPOL_KEY
<150>Apr 30 21:25:11 Vigor: WLAN_DBG - WpaEAPoLhandler, from 0:1e:c2:c0:9c:3b
<150>Apr 30 21:25:11 Vigor: WLAN_DBG - EAPoL_handler, from 0:1e:c2:c0:9c:3b
<150>Apr 30 21:25:11 Vigor: WLAN_DBG - send 1st packet in 4-way handshake
<150>Apr 30 21:25:11 Vigor: WLAN_DBG - RSN, Send key to: 0:1e:c2:c0:9c:3b
<150>Apr 30 21:25:11 Vigor: WLAN_DBG - WPA handshake start for 0:1e:c2:c0:9c:3b
<150>Apr 30 21:25:11 Vigor: WLAN_DBG - WPA2 capable client
<150>Apr 30 21:25:11 Vigor: WLAN_DBG - MLME Associate MAC 0:1e:ffffffc2:ffffffc0:ffffff9c:3b
Strongly suggesting that the MBP is not completing the WPA handshake.
Any ideas as to where my investigations could progress? (The router manufacturer tells me that the WPA timeout handler is not configurable on the router).
TIA
Pat

IPad will not connect to wireless

iPad will not connect to wireless network, keeps trying but will not connect. Working on our other iPad that has no issue connecting to the same network

Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
And this - Unplug the charger from the iPad and then replug. May resume charging.
Or - Recalibrate the battery. See link below.
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
What to Do If Your iPad Won't Charge
http://ipad.about.com/od/iPad_Troubleshooting/a/What-To-Do-If-Your-Ipad-Will-Not -Charge.htm
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Can not connect my wireless printer to the new router.

Can not connect my wireless printer to the new router.

Can you please provide details:
1. The make and model of printer
2. Make and Model of Wireless Router
3. Is your printer connection wireless to router or a cable to PC
4. What have you done or attempted to do to establish a connection?
5. Any further info to assist

Cannot pair iPhone4 (iOS 7.1) with Macbook air (iOS 10 yosemite); they do see each other but will not connect via bluetooth

cannot pair iPhone4 (iOS 7.1) with Macbook air (iOS 10 yosemite); they do see each other but will not connect via bluetooth

That is because they do not generally pair. What is it that you are trying to do by connecting them via Bluetooth? If you are referring to AirDrop or continuity, then all you need to do is have Bluetooth turned on, they do not pair.

Questions: cannot connect via wireless laptop (router WR...

Questions:
cannot connect via wireless laptop (router WRK54G)
cannot secure my network using WEP

from the wired computer , access the router using http://192.168.1.1 . the default password is admin
on the router ui , click on the "wireless" tab , change the ssid - any non-linksys name , channel - 11 , ssid broadcast - enabled
go to the "wireless security" subtab .. change the security mode to WEP - 64 bits , default transmit key - 1 , enter a 10 digit hexadecimal number in the WEP key 1 field , passphrase - empty
under the "advanced wireless settings" , change the beacon interval - 50 , Fragmentation threshold - 2304 , RTS threshold - 2307

IOS7 update failure w/ error "Not Connected to Wireless", but I am connected- How can I update?

My iPad has the defective "gotofailure" bug in iOS7, but there is only 1 pending update which describes a completely unrelated issue. I am connected to my Wireless LAN, and that connection works fine. But, when I try to download and install the pending update (Which may or may not have the major security hole fixed), the update fails with the error message "not connected to wireless". How can I get someone at Apple support to tell me how to get around this problem?
What am I supposed to do when the fix for a major bug is blocked by another (apparently minor) update?
(note: I am over the 30 day warranty, but within the 1 year warranty. However, Apple support wants me to pay $20 to have them tell me how to fix their defective software...
I expect that the 1 year warranty should apply to defective software, especially this major security bug!
This bug completely compromises browser and internet security... it is a HUGE deal!
see: http://www.wired.com/threatlevel/2014/02/gotofail/ ).
This is my first Apple product since the Apple 2E. If this is the level of customer support and warranty for defects, hardware or software, that Apple provides, it may well be my last apple product.
I have worked in customer support at another major computer company, and this type of policy is the surest way to send customers to your competitors that I know of. Tim Cook, are you listening?
(P.S. Don't bother trying to get the attention of any Apple Executive - they don't want to hear from customers to provide feedback on their products or policies - not by phone nor by email.)
Any workarounds for the problem or a way to update the iOS7 to fix the security hole will be greatly appreciated.

Hi...
I think here the issue may be that the utility and the internet connection are not getting synchronised. The operating system on your computer is it win XP? If it is win xp, u can use the windows wireless software to manage to your wireless network. In order to use the windows wireless zero configuration, right click on the linksys icon at the bottom right hand corner of the task bar, select the option that says "use windows wireless ....".
The linksys icon will be grayed and windows will be managing the wireless network. Connect to your wireless network and you should be able to go online.

Can not connect to wireless networks with ipad 2

My ipad used to connect to the wireless net at home and in public areas.
Now all by the sudden it can't "see" the network.
Message: " could not connect to wireless network"
I have tried "everything" also on different networks,
except resetting the modem.
My iPhone works, as do all my other computers.
Modem is Zyxel P2812

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Can't use apps because it says I'm not connected to wireless network

How do I use apps if it keeps saying I'm not connected to wireless network when I'm connected to wifi and have data connectivity??

rixxy12345 wrote:
How do I use apps if it keeps saying I'm not connected to wireless network when I'm connected to wifi and have data connectivity??
Which apps?
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

G410 not connecting in wireless

I have a G410 notebook model 2049 52q with gemtek wireless lan card.
I hv installed win xp sp2 with all drivers. But it is not connecting to wireless router of DLink or Linksys.
No light for wireless is glowing. While other Lenovo notebook of N series is connecting fine with router.
G 410 is not connecting with another wireless laptop. It just does not show any wireless network in range
Message Edited by Rajhans on 09-24-2008 06:05 AM

To make wireless network working you must match three conditions:
1) Drivers are installed (no yellow marks in Device Manager)
2) Hardware switch is ON (it's on right side of notebook, near power chord)
3) Fn+F5 utility is working.
Check these please and post back if everything is as described.
//help will save the world

HP 2600n not connecting via Wireless

Similar Messages

Maybe you are looking for