HP 2600n's margin problem with driver 2.3
After installing the new driver v2.3, my printer started to have a margin problem. Even if I setup any margin correctly (on any software...) the page printed has borders cut off and it is shifted on the left (or, left margin is less than the right). Obviously, this problem was found with files that previously were printed correctly.
Only by reducing by more than one cm margins, the print is not cut, but the page continues to be shifted to the left.
Any help?
Thanks.
Try downloading and re-installing the Snow Leopard drivers and seeing if that fixes anything.
Similar Messages
-
Problem with driver for ipod nano 2nd gen on windows xp
Every time i plug my ipod into my computer i get a message saying that theres a problem with the driver for an unknown usb device.
Hp Pavillon 6630 Windows XP ProHave you had a chance to look at this troubleshooting
page? It may be of some help: iPod is not recognized properly by computer
when USB drivers are not installed properly or are
out of date
I tried that but it didnt do anything my ipod comes up as unknown device in the device manager and thats the only place it shows up no where else -
Problems with driver in microsoft windows vista
I speak of Brazil, I have a smarthfone BlackBerry 8100 and a Dell Inspiron 1525 notebook with Windows Vista 32-bit, Service Pack 1. I'm having problems with "Bluetooth peripheral device" and the solution of the problem indicates to contact with RIM to find and properly install the driver of that device. How did attempt to resolve the download of the BlackBerry Desktop Software v4.7, but said, I want to get a resolution to the problem. No more, thank you now.
> What can we do?
Let your Cisco rep know that this is an important feature. The word I have is that stateful firewall is not in the Vista feature set for Cisco.
The readme for the Cisco VPN client 5.0 bears this out:
Known Issues:
CSCsh02887 Vista: Stateful firewall does not start.
CSCse44616 Vista: VPN Client should not install Zone Lab Firewall on Vista platform
CSCsf07334 Vista: Stateful Firewall Not Supported on Vista VPN Client -
MBP 2011 can't find harddrive (not problem with drive or cable)
My early 2011 MBP 13" was running fine, then froze up. On restart I got the image of the folder with a question mark on it (the Mystery Folder) - the system couldn't find a drive to boot from.
I took it to a genius bar and the, ahem, "genius" said the system couldn't find the drive because of a problem with the drive. "The drive's dead" he said. I hadn't backed it up, and was freaking out that I'd lose all my data. The only option he said Apple could do would be to take it away (for a week) and put a new hard drive in for £80. They'd take the old drive out, and I wouldn't get it back to try and recover the data.
I asked about replacing the drive myself, as I've done that on PCs, and he said I could try it.
I bought a new hard drive, and an external enclosure. I put the new hard drive in the MBP - Mystery Folder. I put the old drive in the external enclosure - it starts up! Everything still there, exactly as I left it when it froze. I clone the old hard drive onto the new one, try booting from the new drive in the MBP. Mystery Folder. I connect the new drive with an external enclosure - it starts up! And everything running fine.
It's the cable, I hear you cry. So I ordered a new internal cable. Replaced it. Started it up. Mystery Folder.
So, it's not the hard drive, it's not the cable. What is it?!Hi Ogelthorpe.
That's right - I now have 2 hard drives, clones of each other.
Both will boot when in an enclosure and connected with a USB.
Neither will boot when inside the MBP.
So it's not the drives that are the problem. Therefore it's an internal cable problem?
I replaced the cable.
Neither drive works when connected internally with the new cable.
What else could it be that means the system can't see the hard drive when connected internally? -
Extreme Music - Problems with Driver and Installation
Hi guys,
?After the my computer has given up it's life on the last friday, I bought a new one and wanted yesterday to install everything like OS, driver and so on.
I started the install of the driver(which is the version from the creative website , released in july 2009) for my soundcard, the X-FI Extreme Music and when the information was given, that the Windows drivers will be updated and it will take some minutes, something happend:
At my first try a bluescreen appered. You can imagine, that I was shocked to see a bluescreen on my new pc after an hour.
I run CCleaner to remove some rests of the "maybe installed" driver and started it again. There was no bluescreen, but the mouse freezes and the setup does nothing anymore. I can close it with may keyboard, but the driver wasn't installed.
After a new clean up with CCleaner I tried it again. I put out my cable of the mouse , so maybe this was the problem(ofc, WHY is there a problem with USB and PCI Cards ?). The installations works, no hang up or freezes. After a restart nothing happend. No sound. I looked at the hardware manager(do not know, whether it is the correct word, I'm german and have a german windows ) of windows and at audio, video and gamecontroller, there is a warning of not working driver.
I remember, that on my old system the driver was titled something like
X-FI Audio[800] or something like that.
But here it was named with?
X-FI Processor WDM
I thing the system is installing the wrong driver.
I looked at some forums , find the hint to change the PCI slot. I did it, but nothing changed.
So, here are some information of my system configuration, maybe someone can help.
Old system(where the soundcard works fine with no problems):
- Athlon X2 4200+(socket was the "old" 939)
- Asus A8N-E
- DDR 400 RAM, 2GB
- Windows XP Professional(32 Bit) with SP3
New System:
- Phenom II X4 80(quadcore)
- Gigabyte MA790XT-UD4P
- DDR3 333 RAM , 4GB
- same OS as used in the old configuration
Ofc all chipdriver were installed and seems to work fine.
The onboard soundchip is disabled too.
Hope for help ^^
Mel
Message Edited by Meldanor on 08--2009 2:20 [email protected]Hi guys,
I'm very sry for the wasted bytes and bits in this forum, but my problem was solved some minuetes after this post >.< .
I tried once again to install the driver and everything is working ... until yet, but only the future will show me, whether it will work or not ^^
What I've done? Just a restart after the post. -
Windows XP tablet edytion and problem with driver X200
Hello
I have problem with Windows XP Tablet edytion , I must working with this system . Microsoft stop all. I do not have a one driver is SM Bus controller and not work tablet button . Can you help me ?Hi Wogabun and welcome to the community,
Download and install TVSU and run it and see what it comes up with. You'll need MS Net Framework 1.1 or 2.0 at least for it to run.
Regards,
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Geforce have problem with driver
Sorry i cant find any related to Geforce 3 Ti200, so i use Geforce 4 ti as it topic fronties. Currently i am using Geforce Ti200, after i install ur website driver Nvidia VGA Driver 45.32 for Win2000/XP/Server2003, it just very often keep my pc hang at the time, if i no use this driver, i cant play certain game, do u mind tell me what to do? Why this driver caused a lot of problem to my pc? Is it somekind of bug, can u release new driver to fix it?
No MSI employees work in this forum, this is a user to user help forum only.
As far as the drivers for the Ti-200, there were users reporting problems with later drivers in this forum. If you do a search of the VGA forum, I'm sure you'll find the threads related to this issue.
I suggest going here http://ftp://download1.nvidia.com/Windows/ and try that version instead of MSI drivers. You may not be successful however. I suggest using "Driver Cleaner" found here http://www.driverheaven.net follow the directions supplied with the download and found on the website.
If you are not successfull, then you may have to upgrade your video card. -
I have problems to use printer HP laserjet 2200 with driver PCL6, the erroe REP-1849 it's displayed when send a report to this printer.
I work whith diver 6L, but don't have chance to use the "Duplex" function.The problem WAS the languageset.
This helped
http://oraclespin.wordpress.com/2008/05/01/setting-nls_lang-for-oracle/ -
Problem with Drive Encryption for HP ProtectTools - Error EE050014
Hello!
I have a problem with starting up my HP.
I am using a HP Probook 4530s, have had it for approximately 2 years now - this is a new problem that has never occured before.
On startup, after swiping my finger/entering the password at the HP Protecttools screen, I get an error screen titled "Mcafee endpoint encryption" saying "Error 050014 file access error". As far as I'm concerned this is not a Mcafee product although it mentions Mcafee, and I will not receive any help from their support forums. All I can do is press enter, then the cursor is locked in place and nothing but restarting the computer can be done, and then the process repeats.
Before this error occured, I was going through files with an anti-malware program and it is possible I may have deleted something that might have triggered this, however since I cannot access the desktop or anything it is impossible for me to look into that.
I have been desperately looking for a solution for a while now but have come up with nothing solid. Any help is greatly appreciated!
Regards!Hello matroid,
Your ProBook is a Business model. Your issue would be best answered on the HP Enterprise Business Community Forum
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
LaserJet 2600n Print Quality problem (with a scan showing the problem)
I'm trying to create areas of solid colour in order to use the toner transfer method of making printed circuits. To do that I need to print really dark solid black blocks - when I try that I see uneven toner in certain areas. This scan of the output shows the problem:
There are lighter areas (less covered by toner) at the bottom (page orientation wise) of solid black blocks - but only where there is a subsequent block of black below! For example, the leftmost shape's bottom edge is fine.
I'm perplexed. I'm very impressed with the configurability of the 2600n, and I get the feeling that there's probably a setting I could tweak to solve this, and I'm hoping that there's a laser printer expert reading this forum who'll have some suggestions.
Cheers,
Chris.It looks to me as if you have your print quality setting in your printer driver set to standard or draft rather than set to best photo. This setting has to be changed in your printer driver which is accessed by the button in the lower left-hand corner of the screen when you are in the print module.
-
Problems with driver for ATI xpress 200
Hi all,
this morning I saw that there is KDE4 available. Straight away I installed the packages, run it and it crashed. There was a funny graphical effect just before the crash. This gave me the impression that the problems comes from the graphical driver. I tried the proprietary ATI driver which hangs once kdm is launched. Then I tried VESA which doesn't even start for some funny reason. Eventually I turned to the open source ATI drivers. With them I'm running KDE in resolution 1280x768 which is somewhat strange. So far, I haven't found a solution and think I need a help.
Here is my xorg.conf
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "ATIScreen" 0 0
#Screen 0 "VesaScreen" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
EndSection
Section "Files"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/speedo"
FontPath "/usr/local/share/fonts"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "drm"
Load "extmod"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "glx"
Load "bitmap" # bitmap-fonts
Load "freetype"
Load "record"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,cz"
Option "XkbVariant" ",qwerty_bksl"
Option "XkbOptions" "grp:rwin_toggle"
EndSection
Section "InputDevice"
#Option "Emulate3Timeout" "70"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
Option "Buttons" "7"
#Option "Emulate3Buttons" "true"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
#Driver "evdev"
#Option "Device" "/dev/input/event4"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
Identifier "MyMonitor"
HorizSync 28.0 - 96.0
VertRefresh 50.0 - 75.0
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "VESA"
Driver "vesa"
EndSection
Section "Device"
Identifier "ATI"
BusId "PCI:1:5:0"
#Option "MonitorLayout" "TMDS"
#Driver "fglrx"
Driver "radeon"
Option "XAANoOffscreenPixmaps" "true"
EndSection
Section "Screen"
Identifier "VesaScreen"
Device "VESA"
Monitor "MyMonitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "ATIScreen"
Device "ATI"
Monitor "MyMonitor"
DefaultDepth 24
SubSection "Display"
#Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
#Section "DRI"
# Group "video"
# Mode 0666
#EndSection
And here is the X11 log
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux pctotem40 2.6.26-ARCH #1 SMP PREEMPT Thu Jul 24 22:35:56 CEST 2008 i686
Build Date: 21 June 2008 05:47:59PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 28 17:15:54 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "ATIScreen" (0)
(**) | |-->Monitor "MyMonitor"
(**) | |-->Device "ATI"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "PS/2 Mouse"
(**) Option "AllowMouseOpenFail" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/Type1,
/usr/share/fonts/TTF,
/usr/share/fonts/speedo,
/usr/local/share/fonts,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e0a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1002,5950 card 103c,280a rev 10 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1002,5a3f card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1002,5a39 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:12:0: chip 1002,4380 card 103c,2813 rev 00 class 01,06,01 hdr 00
(II) PCI: 00:13:0: chip 1002,4387 card 103c,280a rev 00 class 0c,03,10 hdr 80
(II) PCI: 00:13:1: chip 1002,4388 card 103c,280a rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:2: chip 1002,4389 card 103c,280a rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:3: chip 1002,438a card 103c,280a rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:4: chip 1002,438b card 103c,280a rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:5: chip 1002,4386 card 103c,280a rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:14:0: chip 1002,4385 card 103c,280a rev 13 class 0c,05,00 hdr 80
(II) PCI: 00:14:1: chip 1002,438c card 103c,280a rev 00 class 01,01,8f hdr 00
(II) PCI: 00:14:2: chip 1002,4383 card 103c,280a rev 00 class 04,03,00 hdr 00
(II) PCI: 00:14:3: chip 1002,438d card 103c,280a rev 00 class 06,01,00 hdr 80
(II) PCI: 00:14:4: chip 1002,4384 card 0000,0000 rev 00 class 06,04,01 hdr 81
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:05:0: chip 1002,5974 card 103c,280a rev 00 class 03,00,00 hdr 80
(II) PCI: 01:05:1: chip 1002,5874 card 103c,280b rev 00 class 03,80,00 hdr 00
(II) PCI: 3f:00:0: chip 14e4,167b card 103c,280a rev 02 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,63), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00001000 - 0x00001fff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd8500000 - 0xd87fffff (0x300000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xc8000000 - 0xd81fffff (0x10200000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 63: bridge is at (0:7:0), (0,63,63), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 63 non-prefetchable memory range:
[0] -1 0 0xd8200000 - 0xd84fffff (0x300000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:20:3), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 7: bridge is at (0:20:4), (0,7,7), BCTRL: 0x0002 (VGA_EN is cleared)
(--) PCI:*(1:5:0) ATI Technologies Inc RS482 [Radeon Xpress 200] rev 0, Mem @ 0xc8000000/27, 0xd8500000/16, I/O @ 0x1100/8
(--) PCI: (1:5:1) ATI Technologies Inc unknown chipset (0x5874) rev 0, Mem @ 0xd0000000/27, 0xd8510000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xd8400000 - 0xd840ffff (0x10000) MX[b]
[1] -1 0 0xd8a00000 - 0xd8a03fff (0x4000) MX[b]
[2] -1 0 0xd8a09400 - 0xd8a094ff (0x100) MX[b]
[3] -1 0 0xd8a08000 - 0xd8a08fff (0x1000) MX[b]
[4] -1 0 0xd8a07000 - 0xd8a07fff (0x1000) MX[b]
[5] -1 0 0xd8a06000 - 0xd8a06fff (0x1000) MX[b]
[6] -1 0 0xd8a05000 - 0xd8a05fff (0x1000) MX[b]
[7] -1 0 0xd8a04000 - 0xd8a04fff (0x1000) MX[b]
[8] -1 0 0xd8a09000 - 0xd8a093ff (0x400) MX[b]
[9] -1 0 0xd8500000 - 0xd850ffff (0x10000) MX[b](B)
[10] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
[11] -1 0 0x00002120 - 0x0000212f (0x10) IX[b]
[12] -1 0 0x0000215c - 0x0000215f (0x4) IX[b]
[13] -1 0 0x00002148 - 0x0000214f (0x8) IX[b]
[14] -1 0 0x00002158 - 0x0000215b (0x4) IX[b]
[15] -1 0 0x00002140 - 0x00002147 (0x8) IX[b]
[16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[17] -1 0 0x00002100 - 0x0000210f (0x10) IX[b]
[18] -1 0 0x00002154 - 0x00002157 (0x4) IX[b]
[19] -1 0 0x00002138 - 0x0000213f (0x8) IX[b]
[20] -1 0 0x00002150 - 0x00002153 (0x4) IX[b]
[21] -1 0 0x00002130 - 0x00002137 (0x8) IX[b]
[22] -1 0 0x00001100 - 0x000011ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xd8510000 - 0xd851ffff (0x10000) MX[b](B)
[1] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd8400000 - 0xd840ffff (0x10000) MX[b]
[1] -1 0 0xd8a00000 - 0xd8a03fff (0x4000) MX[b]
[2] -1 0 0xd8a09400 - 0xd8a094ff (0x100) MX[b]
[3] -1 0 0xd8a08000 - 0xd8a08fff (0x1000) MX[b]
[4] -1 0 0xd8a07000 - 0xd8a07fff (0x1000) MX[b]
[5] -1 0 0xd8a06000 - 0xd8a06fff (0x1000) MX[b]
[6] -1 0 0xd8a05000 - 0xd8a05fff (0x1000) MX[b]
[7] -1 0 0xd8a04000 - 0xd8a04fff (0x1000) MX[b]
[8] -1 0 0xd8a09000 - 0xd8a093ff (0x400) MX[b]
[9] -1 0 0xd8500000 - 0xd850ffff (0x10000) MX[b](B)
[10] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
[11] -1 0 0x00002120 - 0x0000212f (0x10) IX[b]
[12] -1 0 0x0000215c - 0x0000215f (0x4) IX[b]
[13] -1 0 0x00002148 - 0x0000214f (0x8) IX[b]
[14] -1 0 0x00002158 - 0x0000215b (0x4) IX[b]
[15] -1 0 0x00002140 - 0x00002147 (0x8) IX[b]
[16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[17] -1 0 0x00002100 - 0x0000210f (0x10) IX[b]
[18] -1 0 0x00002154 - 0x00002157 (0x4) IX[b]
[19] -1 0 0x00002138 - 0x0000213f (0x8) IX[b]
[20] -1 0 0x00002150 - 0x00002153 (0x4) IX[b]
[21] -1 0 0x00002130 - 0x00002137 (0x8) IX[b]
[22] -1 0 0x00001100 - 0x000011ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xd8510000 - 0xd851ffff (0x10000) MX[b](B)
[1] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd8400000 - 0xd840ffff (0x10000) MX[b]
[5] -1 0 0xd8a00000 - 0xd8a03fff (0x4000) MX[b]
[6] -1 0 0xd8a09400 - 0xd8a094ff (0x100) MX[b]
[7] -1 0 0xd8a08000 - 0xd8a08fff (0x1000) MX[b]
[8] -1 0 0xd8a07000 - 0xd8a07fff (0x1000) MX[b]
[9] -1 0 0xd8a06000 - 0xd8a06fff (0x1000) MX[b]
[10] -1 0 0xd8a05000 - 0xd8a05fff (0x1000) MX[b]
[11] -1 0 0xd8a04000 - 0xd8a04fff (0x1000) MX[b]
[12] -1 0 0xd8a09000 - 0xd8a093ff (0x400) MX[b]
[13] -1 0 0xd8500000 - 0xd850ffff (0x10000) MX[b](B)
[14] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
[15] -1 0 0xd8510000 - 0xd851ffff (0x10000) MX[b](B)
[16] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x00002120 - 0x0000212f (0x10) IX[b]
[20] -1 0 0x0000215c - 0x0000215f (0x4) IX[b]
[21] -1 0 0x00002148 - 0x0000214f (0x8) IX[b]
[22] -1 0 0x00002158 - 0x0000215b (0x4) IX[b]
[23] -1 0 0x00002140 - 0x00002147 (0x8) IX[b]
[24] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[25] -1 0 0x00002100 - 0x0000210f (0x10) IX[b]
[26] -1 0 0x00002154 - 0x00002157 (0x4) IX[b]
[27] -1 0 0x00002138 - 0x0000213f (0x8) IX[b]
[28] -1 0 0x00002150 - 0x00002153 (0x4) IX[b]
[29] -1 0 0x00002130 - 0x00002137 (0x8) IX[b]
[30] -1 0 0x00001100 - 0x000011ff (0x100) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "extmod"
(II) Reloading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 4.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI Radeon X550XTX (RV370) 5657 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600, ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
ATI ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI ATI RADEON E2400, ATI RV610,
ATI RV670, ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI ATI Radeon HD 2600 XT AGP, ATI ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini ATI Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI ATI Radeon HD 2600 LE
(II) Primary Device is: PCI 01:05:0
(WW) RADEON: No matching Device section for instance (BusID PCI:1:5:1) found
(--) Chipset ATI Radeon XPRESS 200 5974 (PCIE) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd8400000 - 0xd840ffff (0x10000) MX[b]
[5] -1 0 0xd8a00000 - 0xd8a03fff (0x4000) MX[b]
[6] -1 0 0xd8a09400 - 0xd8a094ff (0x100) MX[b]
[7] -1 0 0xd8a08000 - 0xd8a08fff (0x1000) MX[b]
[8] -1 0 0xd8a07000 - 0xd8a07fff (0x1000) MX[b]
[9] -1 0 0xd8a06000 - 0xd8a06fff (0x1000) MX[b]
[10] -1 0 0xd8a05000 - 0xd8a05fff (0x1000) MX[b]
[11] -1 0 0xd8a04000 - 0xd8a04fff (0x1000) MX[b]
[12] -1 0 0xd8a09000 - 0xd8a093ff (0x400) MX[b]
[13] -1 0 0xd8500000 - 0xd850ffff (0x10000) MX[b](B)
[14] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
[15] -1 0 0xd8510000 - 0xd851ffff (0x10000) MX[b](B)
[16] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x00002120 - 0x0000212f (0x10) IX[b]
[20] -1 0 0x0000215c - 0x0000215f (0x4) IX[b]
[21] -1 0 0x00002148 - 0x0000214f (0x8) IX[b]
[22] -1 0 0x00002158 - 0x0000215b (0x4) IX[b]
[23] -1 0 0x00002140 - 0x00002147 (0x8) IX[b]
[24] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[25] -1 0 0x00002100 - 0x0000210f (0x10) IX[b]
[26] -1 0 0x00002154 - 0x00002157 (0x4) IX[b]
[27] -1 0 0x00002138 - 0x0000213f (0x8) IX[b]
[28] -1 0 0x00002150 - 0x00002153 (0x4) IX[b]
[29] -1 0 0x00002130 - 0x00002137 (0x8) IX[b]
[30] -1 0 0x00001100 - 0x000011ff (0x100) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd8400000 - 0xd840ffff (0x10000) MX[b]
[5] -1 0 0xd8a00000 - 0xd8a03fff (0x4000) MX[b]
[6] -1 0 0xd8a09400 - 0xd8a094ff (0x100) MX[b]
[7] -1 0 0xd8a08000 - 0xd8a08fff (0x1000) MX[b]
[8] -1 0 0xd8a07000 - 0xd8a07fff (0x1000) MX[b]
[9] -1 0 0xd8a06000 - 0xd8a06fff (0x1000) MX[b]
[10] -1 0 0xd8a05000 - 0xd8a05fff (0x1000) MX[b]
[11] -1 0 0xd8a04000 - 0xd8a04fff (0x1000) MX[b]
[12] -1 0 0xd8a09000 - 0xd8a093ff (0x400) MX[b]
[13] -1 0 0xd8500000 - 0xd850ffff (0x10000) MX[b](B)
[14] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
[15] -1 0 0xd8510000 - 0xd851ffff (0x10000) MX[b](B)
[16] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[22] -1 0 0x00002120 - 0x0000212f (0x10) IX[b]
[23] -1 0 0x0000215c - 0x0000215f (0x4) IX[b]
[24] -1 0 0x00002148 - 0x0000214f (0x8) IX[b]
[25] -1 0 0x00002158 - 0x0000215b (0x4) IX[b]
[26] -1 0 0x00002140 - 0x00002147 (0x8) IX[b]
[27] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[28] -1 0 0x00002100 - 0x0000210f (0x10) IX[b]
[29] -1 0 0x00002154 - 0x00002157 (0x4) IX[b]
[30] -1 0 0x00002138 - 0x0000213f (0x8) IX[b]
[31] -1 0 0x00002150 - 0x00002153 (0x4) IX[b]
[32] -1 0 0x00002130 - 0x00002137 (0x8) IX[b]
[33] -1 0 0x00001100 - 0x000011ff (0x100) IX[b](B)
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0x00000000d8500000: size 64KB
(II) RADEON(0): PCI bus 1 card 5 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon XPRESS 200 5974 (PCIE)" (ChipID = 0x5974)
(--) RADEON(0): Linear framebuffer at 0x00000000c8000000
(II) RADEON(0): PCI card detected
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
(II) RADEON(0): Direct rendering experimental on RS400/Xpress 200 enabled
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 1 PCI interface in multifunction mode, accessible memory limited to one aperture
(II) RADEON(0): Detected total video RAM=131072K, accessible=65536K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 65536 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 1432, min_out_pll: 20000, max_out_pll: 40000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 400.000000, mclk: 400.000000
(II) RADEON(0): PLL parameters: rf=1432 rd=6 min=20000 max=40000; xclk=40000
(WW) RADEON(0): Proprietary connector found, assuming DVI-D
(WW) RADEON(0): Unknown Connector Type: 8
(WW) RADEON(0): Unknown DDC Type: 8
(II) RADEON(0): Bios Connector table:
(II) RADEON(0): Port0: DDCType-0x68, DACType-2, TMDSType-1, ConnectorType-1
(II) RADEON(0): Port1: DDCType-0x68, DACType-0, TMDSType-2, ConnectorType-3
(II) RADEON(0): Port5: DDCType-0x0, DACType-2, TMDSType-0, ConnectorType-5
(II) RADEON(0): Output VGA-0 using monitor section MyMonitor
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(WW) RADEON(0): No External TMDS Table found
(II) RADEON(0): I2C bus "DVO" initialized.
(II) RADEON(0): I2C device "DVO:RADEON DVO Controller" registered at address 0x70.
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC PAL PAL-M NTSC-J
(II) RADEON(0): Port0:
Monitor -- AUTO
Connector -- VGA
DAC Type -- TVDAC/ExtDAC
TMDS Type -- None
DDC Type -- 0x68
(II) RADEON(0): Port1:
Monitor -- AUTO
Connector -- DVI-D
DAC Type -- None
TMDS Type -- External
DDC Type -- 0x68
(II) RADEON(0): Port2:
Monitor -- AUTO
Connector -- STV
DAC Type -- TVDAC/ExtDAC
TMDS Type -- None
DDC Type -- 0x0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
finished output detect: 1
finished output detect: 2
(EE) RADEON(0): No connected devices found!
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(EE) RADEON(0): Using VGA default
in RADEONProbeOutputModes
(II) RADEON(0): Adding Screen mode: 1280x1024
(II) RADEON(0): Adding Screen mode: 1024x768
(II) RADEON(0): Adding Screen mode: 800x600
(II) RADEON(0): Adding Screen mode: 640x480
(II) RADEON(0): Total number of valid Screen mode(s) added: 4
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): Output VGA-0 connected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Output VGA-0 using initial mode 1280x768
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd8500000 - 0xd850ffff (0x10000) MX[b]
[1] 0 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xd8400000 - 0xd840ffff (0x10000) MX[b]
[7] -1 0 0xd8a00000 - 0xd8a03fff (0x4000) MX[b]
[8] -1 0 0xd8a09400 - 0xd8a094ff (0x100) MX[b]
[9] -1 0 0xd8a08000 - 0xd8a08fff (0x1000) MX[b]
[10] -1 0 0xd8a07000 - 0xd8a07fff (0x1000) MX[b]
[11] -1 0 0xd8a06000 - 0xd8a06fff (0x1000) MX[b]
[12] -1 0 0xd8a05000 - 0xd8a05fff (0x1000) MX[b]
[13] -1 0 0xd8a04000 - 0xd8a04fff (0x1000) MX[b]
[14] -1 0 0xd8a09000 - 0xd8a093ff (0x400) MX[b]
[15] -1 0 0xd8500000 - 0xd850ffff (0x10000) MX[b](B)
[16] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
[17] -1 0 0xd8510000 - 0xd851ffff (0x10000) MX[b](B)
[18] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[22] 0 0 0x00001100 - 0x000011ff (0x100) IX[b]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[24] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[25] -1 0 0x00002120 - 0x0000212f (0x10) IX[b]
[26] -1 0 0x0000215c - 0x0000215f (0x4) IX[b]
[27] -1 0 0x00002148 - 0x0000214f (0x8) IX[b]
[28] -1 0 0x00002158 - 0x0000215b (0x4) IX[b]
[29] -1 0 0x00002140 - 0x00002147 (0x8) IX[b]
[30] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[31] -1 0 0x00002100 - 0x0000210f (0x10) IX[b]
[32] -1 0 0x00002154 - 0x00002157 (0x4) IX[b]
[33] -1 0 0x00002138 - 0x0000213f (0x8) IX[b]
[34] -1 0 0x00002150 - 0x00002153 (0x4) IX[b]
[35] -1 0 0x00002130 - 0x00002137 (0x8) IX[b]
[36] -1 0 0x00001100 - 0x000011ff (0x100) IX[b](B)
[37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[38] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit c8000000 0 0
(==) RADEON(0): Write-combining range (0xc8000000,0x4000000)
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable montype: 1
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x08000000
(II) RADEON(0): MC_FB_LOCATION : 0x3fff3800
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1920,8191)
(II) RADEON(0): Reserved area from (0,1200) to (1920,1202)
(II) RADEON(0): Largest offscreen area available: 1920 x 6989
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x11d0000
(II) RADEON(0): Will use depth buffer at offset 0x1a9a000
(II) RADEON(0): Will use 29184 kb for textures at offset 0x2364000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xc8000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 8192 kB allocated with handle 0xf8e72000
(II) RADEON(0): [pci] ring handle = 0xf8e72000
(II) RADEON(0): [pci] Ring mapped at 0xb38a5000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xf8f73000
(II) RADEON(0): [pci] Ring read ptr mapped at 0xb38a4000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf8f74000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xb36a4000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xf9174000
(II) RADEON(0): [pci] GART Texture map mapped at 0xb31c4000
(II) RADEON(0): [drm] register handle = 0xd8500000
(II) RADEON(0): [dri] Visual configs initialized
disable montype: 1
init memmap
init common
init crtc1
init pll1
freq: 80140000
best_freq: 80136923
best_feedback_div: 291
best_ref_div: 13
best_post_div: 4
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x3fff3800 0x3fff3800
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
restore common
restore crtc1
restore pll1
finished PLL1
restore dac
enable montype: 1
(WW) RADEON(0): No crtc mode list for crtc 1,continuing with desired mode
disable montype: 1
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 17
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0x3fff3800 is: 0x3fff3800
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0x41ff4000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x3fff3800 0x3fff3800
(II) RADEON(0): MC_AGP_LOCATION : 0x41ff4000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration unsupported on Radeon 9500/9700 and newer.
(II) RADEON(0): Render acceleration disabled
(**) RADEON(0): Option "XaaNoOffscreenPixmaps" "true"
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) Option "dpms" "true"
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor 0 (scanline 1202)
(II) RADEON(0): Using hardware cursor 1 (scanline 1204)
(II) RADEON(0): Largest offscreen area available: 1920 x 6984
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 338 x 203
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us,cz"
(**) Keyboard0: XkbLayout: "us,cz"
(**) Option "XkbVariant" ",qwerty_bksl"
(**) Keyboard0: XkbVariant: ",qwerty_bksl"
(**) Option "XkbOptions" "grp:rwin_toggle"
(**) Keyboard0: XkbOptions: "grp:rwin_toggle"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "IMPS/2"
(**) PS/2 Mouse: Device: "/dev/input/mice"
(**) PS/2 Mouse: Protocol: "IMPS/2"
(**) Option "SendCoreEvents" "true"
(**) Option "CorePointer"
(**) PS/2 Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Buttons" "7"
(==) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: Buttons: 11
(**) PS/2 Mouse: Sensitivity: 1
(II) evaluating device (PS/2 Mouse)
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) PS/2 Mouse: ps2EnableDataReporting: succeeded
enable montype: 1
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) 3rd Button detected: disabling emulate3Button
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
Would you know what is the problem?
Many thanks, Jan.The problem WAS the languageset.
This helped
http://oraclespin.wordpress.com/2008/05/01/setting-nls_lang-for-oracle/ -
We have changed the server of linux that supports tarantella. We have
installed tarantella on redhat 8 and worked perfectly. I have installed
the tarantella enhancement module for windows and activated in the array
manager the option " let users access client drives " but on having
entered the session of windows not does not appear the local hard disks.
There is something more than I have to do in order that me it works? Thank
you for yours helpCarmelo wrote:
The problem is
18:32:27 : 00007219: javi : Add device failed with ERROR_BAD_NETPATH
You may want to enable WINS per
http://www.tarantella.com/documentation/sgd/ee/3.42/help/en-us/base/standard/am_array.html
-> Client Drive Mapping: Use WINS for better performance
Regards,
Javi wrote:
Carmelo,
I have verified that is running cdm, besides I have verified also that
from the windows servers solves perfectly the name of the redhat server.
I write you the mistakes that me appear in the log of the ttadm, for if
you know which is the mistake. Thank you very much
18:32:21 : 00000453: javi : URI file Drive A for Administrator
18:32:21 : 00000453: javi : Share = \\medea\Drive A for Administrator
18:32:21 : 00000469: javi : Packet >> Packet nLength 5
18:32:21 : 00000469: javi : General options flags 8
18:32:21 : 00000469: javi : Alternative name = V:
18:32:21 : 00000469: javi : Packet >> Packet nLength 3
18:32:21 : 00000469: javi : DEVICE_CLASS_FILESYSTEM
18:32:21 : 00000469: javi : device flags 2
18:32:21 : 00000469: javi : Device info : Dos name = , search = 1,
searchUp = 0
18:32:27 : 00007219: javi : Trying alternate device V:
18:32:27 : 00007219: javi : Failed to add device to V:
18:32:27 : 00007219: javi : Add device failed with ERROR_BAD_NETPATH
18:32:27 : 00007219: javi : failed to add device
18:32:27 : 00007219: javi : WTSVirtualChannelWrite returned 18 bytes
18:32:27 : 00007219: javi : 0x0042a160 01 10 00 00 00 10 00 00 00 01 01
00 00 00 00 00 ................
18:32:27 : 00007235: javi : 0x0042a170 00 00 ..
18:32:27 : 00007235: javi : ServerChannel::isDataAvailable
WTSVirtualChannelRead returned 176 bytes
18:32:27 : 00007235: javi : 0x0042a7a4 00 b0 00 00 00 11 00 00 00 01 00
43 19 00 44 72 ...........C..Dr
18:32:27 : 00007235: javi : 0x0042a7b4 69 76 65 20 43 20 66 6f 72 20 41
64 6d 69 6e 69 ive C for Admini
18:32:27 : 00007250: javi : 0x0042a7c4 73 74 72 61 74 6f 72 09 00 00 00
00 00 00 00 01 strator.........
18:32:27 : 00007266: javi : 0x0042a7d4 5c 00 00 00 25 00 73 6d 62 3a 2f
2f 6d 65 64 65 \...%.smb://mede
18:32:27 : 00007266: javi : 0x0042a7e4 61 2f 44 72 69 76 65 20 43 20 66
6f 72 20 41 64 a/Drive C for Ad
18:32:27 : 00007281: javi : 0x0042a7f4 6d 69 6e 69 73 74 72 61 74 6f 72
00 00 00 00 01 ministrator.....
18:32:27 : 00007281: javi : 0x0042a804 2c 00 00 00 14 00 59 57 52 74 61
57 35 70 63 33 ,.....YWRtaW5pc3
18:32:27 : 00007297: javi : 0x0042a814 51 35 4d 44 41 33 4f 44 45 3d 14
00 55 6b 64 42 Q5MDA3ODE=..UkdB
18:32:27 : 00007297: javi : 0x0042a824 50 54 4a 57 55 44 59 77 4d 43 73
79 57 53 45 3d PTJWUDYwMCsyWSE=
18:32:27 : 00007313: javi : 0x0042a834 14 00 00 00 05 00 00 00 08 00 01
00 56 03 00 00 ............V...
18:32:27 : 00007313: javi : 0x0042a844 00 02 00 00 00 00 00 00 00 00 00
00 00 00 00 00
18:32:27 : 00007328: javi : TTDMServer::process messagecode 0 deviceid 17
Carmelo wrote:
Javier,
What version of Tarantella are you running? The reason I ask, is that
since v3.30 you also need to run
$ tarantella start cdm
Also see
http://www.tarantella.com/documentation/sgd/ee/3.42/help/en-us/base/standard/cdm.html
>>
>>
Regards,
Javier wrote:
We have changed the server of linux that supports tarantella. We have
installed tarantella on redhat 8 and worked perfectly. I have installed
the tarantella enhancement module for windows and activated in the array
manager the option " let users access client drives " but on having
entered the session of windows not does not appear the local hard disks.
There is something more than I have to do in order that me it works? Thank
you for yours help
If you are using WINS the problem appears to be one of WINS name mapping.
Check if the Tarantella server is not on the same subnet as the Windows
Terminal Server that you
are using to run your Windows applications.
You need to add the Tarantella server to each of the Windows Terminal
Servers as a WINS server.
After that you may need to restart the Windows terminal Server.
Hope it helps.
Regards,
Gonzalo -
Problems with Drive Mapping using Oracle Drive
It seems as though we are having some trouble with oracle drive. The install was a piece of cake, as was the configuration. The problem arises when at times we connect with the proper credentials, Oracle Drive logs the user in, but then the appropriate drive does not map. Nothing shows up under "My computer". The window will launch for the user to use Oracle Drive, but they get error messages including, "Cannot support long file names." (AKA, anything longer than 8 characters).
Has anyone else come across these issues? Any ideas how to resolve. The issues we get with the long file names seem to only be when the drive doesn't properly map.
Any thoughts would be helpful.
Also, I have heard rumors of a Production version of Oracle Drive. Anyone have some news on that?We are very pleased to announce the Production Release 10.1.2.0 of Oracle Drive.
You can download the software from here:
http://www.oracle.com/technology/software/products/cs/index.html
Note:
- This version is production for English only. Other languages are Beta.
- Oracle Drive 10.1.2.1 for ALL languages is expected soon.
Find more information on Installation and Configuration as well as a Viewlet that shows Oracle Drive in Action here:
http://www.oracle.com/technology/products/ias/portal/content_management_10gr2.html
regards,
Christian -
Hi all!
I'm trying to change the property datestyle of my db in order to get the timestamp fields in the european format dd/mm/yyyy . The problem is that the jdbc driver gets me this error
The JDBC driver requires DateStyle to begin with ISO for correct operation.
Is it possible to change this property?
Thanks in advanceHI,
Did you download and tried the latest MYSQL ODBC driver with a 64 bit description?
Here is the SAP note for you to refer:
1198522 - MySQL DB connection not recognized on a Windows Server 64 bit computer
Language: English Version: 1 Validity: 31.03.2008 - active
Symptom
You install BusinessObjects Enterprise and MySQL on a computer running Windows Server 64bit. When doing a later install of MySQL or MySQL upgrade however, BO doesn't seem to recognize the new connection through even though the installation is running fine
Cause
The DB connection is not viewable from the ODBC but BusinessObjects still functions correctly.
Resolution
Under 64bit Windows, there are two ODBC administrators. They are both called "odbcad32". The 32-bit ODBC administrator is located under Windows\SysWoW64 and the 64-bit ODBC Administrator is located under Windows\System32. BusinessObjects will still use the 32-bit connection.
Only the 64-bit ODBC Administrator displays the MySQL driver shipped with BusinessObjects and the Central Management Server (CMS) data sources.
For more information, see Microsoft Knowledge Base article 942976.
Regards,
Clint
Edited by: Clint T. Pauyon on Feb 20, 2009 7:36 AM
Edited by: Clint T. Pauyon on Feb 20, 2009 7:38 AM -
MSI N260GTX Problem with driver or...?
I installed a MSI N260GTX today on an Asus PQ5 P45 mobo. After installing the drivers from the CD provided with the graphic card, my Windows XP went into 4-bit colors. I tried various of other drivers, but the same problem occured.
I am going to try the grap.card. on another system tomorrow, but can you tell if the problem is with a busted G.card, busted mobo or some other issue?Boot in "Safe Mode" then use Driver Sweeper { http://downloads.guru3d.com/download.php?det=1655 } to remove current drivers.
Then reboot to normal mode and install latest drivers, depend of your OS version:
32bit XP ==> http://www.nvidia.com/object/winxp_178.24_whql.html
64bit XP ==> http://www.nvidia.com/object/winxp64_178.24_whql.html
Maybe you are looking for
-
Oracle 10g on RHEL 5.3 - Problem
Hello. I m new to LINUX and ORACLE. I try to install Oracle 10g on my RHEL 5.3 and it shows the following problem... ./runInstaller Starting Oracle Universal Installer... Checking installer requirements... Checking operating system version: must be r
-
Error when register SQLServer driver
Hi Error #: 302 : cannot access class com.microsoft.jdbc.sqlserver.SQLServerDriver; neither class nor source found for com.microsoft.jdbc.sqlserver.SQLServerDriver at line 19, column 63 i have got the previous error when code the following code Drive
-
Is it possible to turn off multi-cam monitoring in the source monitor?
Obviously I can edit cameras and turn it off that way. But is there a way to toggle between a single-cam view and the quad split?
-
HP ENVY 17 Notebook My speakers aren't working
Hi. Can anyone help me? I have recently updated my hp to windows 8.1 64 bits but I hadn't any problem till yesterday. I often hear music on my laptop and yesterday I plugged (for the first time since I have the laptop - it has a month or two) my head
-
9 Apple TV's over on 2 Mac Mini's over network... or is there a fix for the 5 device rule yet?
What is the easiest way to sync the libraries on each device if they are pulling from an external hard drive without doing it manually? Also without using iCloud due to bandwidth issues (we are a moving vessel with VSAT bandwidth). OR is there a way