HP 3005pr Port Replicator wont install in Vista

I'm trying to install a HP 3005pr USB 3.0 Port Replicator on Windows Vista Ulimate 32bit and the installtion fails.
I get "A previous uninstall of HP Port Replicator is not yet complete. Please reboot your computer and run this installer again to installation."
I've rebooted and it does not help.
The installer is sp60674.exe
I've had a Google and most of the hits talk about Windows 8 compatibility.
However, some suggestions made by other people include:
- Uninstalling the program - it's not in the list
- CCleaner - I did every option in all the lists
- try an older driver version - I found sp57727.exe and although it appeared to install I don't have anything appearing in the Programs list and the drivers are still missing.
Any other suggestions ?

I understand you have some questions connecting the zr2440w monitor to the Hp 3005pr port replicator.
The back of the replicator should look something like this.
Question 1) What cable do I need to connect the port replicator to the monitor to use the monitor's built-in speakers?
The green headphone jack is how you would connect it to a set of external speakers. If the monitor has its own speakers, it should have a port to match it. This is a standard 3.5mm audio jack, so any standard 3.5mm speaker cable should work. I will note that this monitor didn't list any audio input. Monitors that have speakers usually have an analog audio input jack.
Question 2) Does the monitor have a built-in microphone?
This guide lists all the features of this monitor starting on page 2. It doesn't appear to have a microphone. You could still connect an external microphone to the port replicator's microphone jack.
Let me know if this answered your questions.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

What cable(s) for audio on hp zr2440w monitor with HP 3005pr port replicator and HP Folio laptop?

I have an HP ZR2440w monitor.
I have an HP Folio laptop.
I have an HP 3005pr port replicator.
I want to use the monitor's built-in speakers.
Question 1) What cable do I need to connect the port replicator to the monitor to use the monitor's built-in speakers?
Question 2) Does the monitor have a built-in microphone?
Question 2b) If yes, what cable do I need to connect the port replicator to the monitor to use the monitor's built-in microphone?
Thanks!

I understand you have some questions connecting the zr2440w monitor to the Hp 3005pr port replicator.
The back of the replicator should look something like this.
Question 1) What cable do I need to connect the port replicator to the monitor to use the monitor's built-in speakers?
The green headphone jack is how you would connect it to a set of external speakers. If the monitor has its own speakers, it should have a port to match it. This is a standard 3.5mm audio jack, so any standard 3.5mm speaker cable should work. I will note that this monitor didn't list any audio input. Monitors that have speakers usually have an analog audio input jack.
Question 2) Does the monitor have a built-in microphone?
This guide lists all the features of this monitor starting on page 2. It doesn't appear to have a microphone. You could still connect an external microphone to the port replicator's microphone jack.
Let me know if this answered your questions.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

X301 Thinkpad USB port Replicator unattended install

I want to install the USB Port Replicator software http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS012816 via our SCCM environment.
The setup file does not seem to be able to do a unattended installation.
Can anyone help me?
Jesper

Please call our HelpCenter and explain what you need and ask that your case be escallated to Level 2. Our Level 2 support team is working with customers to provide instructions and a package that can be deployed silently for the USB Port Rep. Hopefully in the future the released driver package can be updated to provide this support.

CS4 Master Collection wont install on Vista Ultimate 64-bit.

Im using my friends cs4 disc's wich he doesent use any more (switched from windows to mac) and it wont install
full quality image atached if you cant read this one.

This is a very close friend we've been working together since high school. but other than that dont you have any ideas whatsoever?
or is there any way to skip the system profile check, cause i'm prity sure my system is more than adiquate to run cs4
3.16ghz duo core, 4gb ram, 1gb ati radeon his hd4670.

Wont install with Vista

i install it and it says it is but when i close everything
and try to open up the ea store it says i dont have it. i have
tried installing and restarting

I have the same problem! Im trying to install Icloud at my pc Windows Vista Service Pack 2,0, but i get the message" You cant install Icloud 3,0 without having Windows 7 or 8????
Please help!

Itunes wont install on vista, No digital signature

I had a problem were Itunes would not update or anything Apple related (quicktime etc) so i deleted Itunes and tried to run it as a fresh copy.
Yet when i download it and try to run the application i get the box from windows asking me if i want to run it, but in this box next to publisher it says unknown.
When i click run nothing happens. The box disappears and thats that.
If i click on the application and go into properties and go into digital signatures it says the digital signture is not valid. Ive tried downloading it with Explorer, Firefox incase that was it. I have even done a clean install of windows and tried to install itunes first incase there was a conflict.
Can anyone please help because its driving me nuts!

Mr. Peck-- Would like your advice re: where to post this question. I cannot update ITunes and Quicktime to the newest version using apple update in the windows environment. I have tried disabling antivirus software without help. Error is that it is not receiving a "valid signature." Installation on the mac side of updated quicktime and Itunes works fine. Windows version is XP SP3-- with appropriate updates.
Is there a solution that you know of? Where would you suggest posting this question?
Thank you,
Mark D

New version of NSU wont install on vista

Just keeps saying windows installer has encountered a problem and will close. Tried uninstalling all Nokia Apps, reinstalling, uninstalling, doing a registry clean, reinstalling , still get the same thing. Any ideas anyone

I would use Microsoft CleanUp Utility to clean up all the files you have probably all over your PC from previous iTunes. Go into Add/Remove programs and uninstall iTunes.
Next, go to the Apple site, and download the new iTunes. But FIRST, turn OFF your antivirus and firewall programs (as they tend to bungle up the download and install of iTunes and Quicktime), save it to your desktop or Harddrive and install it from there instead of running it over the internet. Come back if you have more questions or problems. Good Luck,
Rachyl

Laserjet 1022 drivers wont install on Vista x64

I hope someone can help me out as I am in a bit of a bind.
Recently I encountered a print spooler subsystem app error which resulted in me obviously losing access to my printer.
After trawling many forums I was able to seemingly reset this and get it back to a stage where everything was operative (I presume it is) yet the issue I have encountered now is the fact that I am unable no matter how many times I try to reinstall the drivers and get the printer back working again.
Has someone experienced the same issue as I have? Please help!

You download drivers from Boot Camp Assistant. Look there.
In the past the drivers were all on your DVD from OS X and would copy them to Desktop in Windows.
Back then, the folder was inside something like Apple \ Drivers \ .... \ Bootcamp64.msi
You can still search Explorer for "Bootcamp64" as well as search these forums.
Others have done same.

Port Replicator FRU 43R8811 Installtion Problems

I have a Port Replicator FRU 43R8811. I wont install on Vista x32. I tried the drivers on the CD and also downloaded them from the Lenovo Page. The Power light turns green when i plug the USB Upstream cable to the pc. But no other USB device attached to it will be recognized and no USB Status light will flash. The display indicator lights wont light up neither.
I also tried to install it with the default Administrator Account, as this worked for some others. Unfortunately without any success.

I have exactly same problem, can anyone help?

3005pr software will not install on Windows 8

Hi,
I am using a 3005pr port replicator on a Spectre XT 4010nr laptop running Windows 8
I was rupdating the software for the port replicator and the install prompted me to uninstall the previous version and I said yes. It had to reboot to complete the uninstall so I rebooted systems.
Now when I try to install the port replicator software I get the error:
"A previous uninstall of HP Port Replicator Software is not yet complete. Please reboot your computer and run this installer again to installation."
I've rebooted, powered off, confirmed the port replication software is not installed through ARP, confirmed the device is not listed in Device Manager. But still see the above error any ideas how to reinstall the software?
Thank you

Try the Windows Installer Cleanup Utility:
http://www.techsupportforum.com/attachments/windows-xp-support/6696d1147451985-cannot-uninstall-prog...

Port Replicator compatible with Windows 8.1

Does anyone know if HP has a port replicator that is compatible with Windows 8.1? I have found that there may be one for Windows 8 but not 8.1.

Hello JLINDBACH,
Thank you for posting on the HP Forums!
I understand you are looking for a port replicator that will work on Windows 8.1. The HP USB 3.0 3005pr Port Replicator does have a driver for Windows 8.1 that you can download here: HP 3005pr USB 3.0 Port Replicator Driver for Windows 8.1
Currently, HP does not sell any with the support built-in out-of-box. Downloading the driver and applying it allow you to have that compatibility. Please let me know if you have any other questions or concerns. Thanks!
Mario
I worked on behalf of HP.

Tecra S1 shuts down when using Port Replicator III

Hi,
Ive got a problem with a Tecra S1 Notebook and Port Replicator III. When I dock the Notebook onto the station, it turns immediately off. It doesnt matter if Im in Windows or not. The same Notebook works in a Port Replicator II without any problems. My first thought was, that the Replicator III may be damaged, but I testet it with another Tecra S1 and it worked! Can somebody help me with this???
Thx a lot!
Mathis

Hi,
is all responsible Toshiba software for the Port Replicator III installed in a right way or do you use it with the "old" versions from the Port Replicator II?
Try to update the software, tools and drivers from toshiba homepage! Then I think it should work!
Bye

T400 Vista 64bit cant see second monitor in port replicator

I installed Vista Business 64bit on my machine that came with 32bit Vista. I was able to download all the drivers. Everything works except it will not see my second dislpay on the port replicator. It sees the VGA display but not the DVI one.
Although the ATI software installed , I cannot use the control center. It says Ati catalyst control center cannot be started becuase the current active GPU is not supported.
Tried calling support and they wont help me becuase the machine came with 32.
If I go in through thw windows display setup it doesn't see the second monitor. This all worked with it was 32 bit vista.
Anyone know of any way around this without going back to Vista 32?
Product: ThinkPad T400 2765-T7U
Original description: T9400(2.53GHz), 2GB RAM, 160GB 7200rpm HD, 14.1in 1440x900 LCD, 256MB ATI Radeon 3470HD, CDRW/DVDRW, Intel 802.11agn, Bluetooth, Modem, 1GB Ethernet, UltraNav, Secure chip, Fingerprint reader, Camera, Intel Turbo Memory, 9c Li-Ion, WinVista Business 32 (now 64)
Message Edited by ov10mech on 03-25-2009 06:56 AM

Solved.. uninstalled the Intel driver and reinstalled and everything worked after that.

USB Port Replicator 2nd monitor doesn't work on restart with Vista

Greetings wise wizards of Lenovo:
I'm helping a friend with the USB Port Replicator, who is running Windows Vista Home Premium on her Acer laptop. She has all of the necessary hardware requirements, and I've installed the Lenovo USB Port Replicator drivers with once with Vista (automatically installing the drivers), once with the CD, and finally from the Lenovo website. The problem is that the port replicator works fine upon installation, but as soon as Vista is restarted, not only does a second monitor not appear automatically, it doesn't appear at all.
Connecting the second monitor to the laptop VGA port works fine, and I can extend the desktop across both the laptop and the second monitor... it is only a problem on restart with the port replicator. I've uninstalled and resintalled three times now, once with letting Vista provide the drivers automatically, once with the CD, and once with the website download.
Any suggestions will be highly appreciated.
Many thanks in advance,
Zovoth

Mines not working on XP. Works fine until I re-boot then I have a hard time getting it to work. I've tried unplugging the ac adapter, usb, tried switching my monitors and still nothing. Both monitors are functioning properly. The icon for the repilicator does not show up down the clock. It's in my program files with the only option to uninstall.
Comon Lenovo, there hasn't been an answer to this question since 2008???

Vista 64 support for Lenovo Enhanced USB Port Replicator?

Does anyone know if there will be Vista 64 support for the "Lenovo Enhanced USB Port Replicator"?
Thanks,
A

every port will install native under vista x64. if displaylink isn't picked up then you can download the driver here.
(edit: typo)
Message Edited by erik on 09-12-2008 08:58 PM
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

HP 3005pr Port Replicator wont install in Vista

Similar Messages

Maybe you are looking for