HP 3015 printer

Hi,
We are providing consumables for thousands of HP 3015 printers, for security reason we would like to keep track of the consumable cartridges.
Anyone know where is the serial number of cartridge is located .
There are many sequence of numbers on the cartridge but none of them is matching the Serial number shown in the supply status printout.

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

  • Iam using 3015 network printer. while iam printing from word it is taking too long to print

    Respected sir,
    I am using 3015 printer.  when ever i give print it is taking too long time nearly 1 minute . there is no problem with the network

    Let's set a static IP address for the printer:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). You can find the DHCP range of the router using its internal settings page or in its manual. Use the CD that came with your router or type the router's IP address (ends in .1) into a browser.
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
    - Click 'Apply'.
    Now, shut down the router and printer, start the router, wait, then start the printer.
    After this you may need to redo 'Add a Printer' using the new IP address.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Problem with Hp Printer

    Hey guys,
    I own a Hp LaserJet 3015 Printer and work with it with my MacBook Pro for now even a year. But since yesterday it won't work any more. My Mac shows the printer up into the printer preferences as installed and ready to print... but when I try to print my printer somehow doesn't get a signal cause the "ready-light" doesn't start to blink and it doesn't say anything on the LCD of the printer. And when I look into the printer preferences, it says, printer isn't responding.... And then after some time my Mac stops all printer works.
    Can anyone help me???
    Thank you so much for an answer
    -Marc

    Delete from Printer Setup and then re-Add.

  • Network Print Jobs Always Get Stuck in Queue

    Hello,
    I have, perhaps, the most frustrating problem on the planet.  In my home network, I have a HP Color LaserJet 2600n connected to my main PC, with 2 other PC's on the network.  All 3 run Windows 7.  Printing from my main PC works fine, but if I try to print over the network, the print job always gets stuck in the queue.  I can see it stuck in the queue on my main PC, but I can't do anything about it.  I can't delete it, nothing.  If I restart the spooler, then it magically prints and clears the queue, but it's annoying to have to do that all the time.  I've reinstalled the drivers several times to no avail.  Tips?
    RPGillespie

    I have a similar problem, I have a directly connected 1300 and a network P3015. The 1300 is connected via USB, the 3015 is connected by RJ45 cable right to the router. Both printers have their print queues get stuck, but only from my HP Pavilion Elite HPE running HP-installed Windows 7. All the other machines in the office can use the 3015 printer perfectly well. One is an older Pavilion using XP-Pro, another is a Dell using XP-Pro and the third is a Lenovo laptop using Windows 7. All our toners are not refills (seems like a stupid suggestion that the toner cartridge could cause a queue to lock up). The problem is definitely between my machine and the HP printers. I have a Brother printer and a couple of Seiko/Epson printers that all work perfectly fine.
    Rebooting several times a day is getting old.

  • Network Print Jobs Stuck in Queue

    Hello,
    I have, perhaps, the most frustrating problem on the planet.  In my home network, I have a HP Color LaserJet 2600n connected to my main PC, with 2 other PC's on the network.  All 3 run Windows 7.  Printing from my main PC works fine, but if I try to print over the network, the print job always gets stuck in the queue.  I can see it stuck in the queue on my main PC, but I can't do anything about it.  I can't delete it, nothing.  If I restart the spooler, then it magically prints and clears the queue, but it's annoying to have to do that all the time.  I've reinstalled the drivers several times to no avail.  Tips?
    RPGillespie

    I have a similar problem, I have a directly connected 1300 and a network P3015. The 1300 is connected via USB, the 3015 is connected by RJ45 cable right to the router. Both printers have their print queues get stuck, but only from my HP Pavilion Elite HPE running HP-installed Windows 7. All the other machines in the office can use the 3015 printer perfectly well. One is an older Pavilion using XP-Pro, another is a Dell using XP-Pro and the third is a Lenovo laptop using Windows 7. All our toners are not refills (seems like a stupid suggestion that the toner cartridge could cause a queue to lock up). The problem is definitely between my machine and the HP printers. I have a Brother printer and a couple of Seiko/Epson printers that all work perfectly fine.
    Rebooting several times a day is getting old.

  • Error in printing HP3015 series printer

    Dear all,
              While printing a Smart form through HP Laser Jet 3015 printer the print is getting cut from left side.But when the same print is generated through HP Laser Jet 2035 printer the print is coming totally fine.
    At first both printers are having SAPWIN as device type but the problem comes in 3015 printer.After installing new device type driver for HP 3015 printer the printing error is still there.
    All the windows level settings are correct,Many times it happened that print was coming fine automatically without making any changes in prog or printer but the printing error again arrives .
    Kindly help me with this.
    Thaks & Regards
    Prasad.

    Hello,
    You can try to use the Horizontal Move and Vertical Shift
    settings in SPAD for the output device to adjust the position of the
    print. This may be the easiest workaround at SAP side.
    Device definition via transaction SPAD to adjust the difference.
       SPAD -> Output Devices -> e.g. LP01
             -> 'Output attributes' tab
              -> Additional Smartform and Sapscript information
               -> Horizontal Movement: enter e.g. 5 mm
    Best regards,
    Wen Peng

  • Wireless network printer using print server

    I have a USB HP LaserJet 3015 printer connected to a print server, Level One FPS-3003 and then connected using RJ-45 LAN cable to my wired/wireless LAN switch router. It works correctly with all my Windows XP and Vista pcs on the LAN wirely or wirelessly.
    I recently bought MBA and configured it to connect the printer wirelessly. Before that, I connected the printer directly onto the MBA and it works like a charm. Once I complete the setup and I tried to print a page from Word Mac 2008. It failed. The print job showed that the Printer Paused and job status was stopped. I tried to click the button of Resume Printer and the printer became Printer Ready but the print job status remained Stopped. I clicked Resume button (Resume printing of selected jobs) and the printer changed to Printer Paused.
    It appears to me that the print server does not like Leopard. I look at the print server menu and the OS requirements are stated Windows 98 SE/ME/2000/XP/2003 and HP-UX, Unix, Linux and RFC-1179 LPD System. Is there any workaround to make it work with Leopard. Thanks!!

    Usually you'll find all the info you need listed under unix or linux (print server manual). Oh, but I see the manual is for Windows only.
    The easiest printer setup will be to plug the printer into USB port 1 and use IP Printing > HP Jetdirect protocol. No Queue name. Refer to manual page 50 - TCP/IP port 9100 equals HP Jetdirect protocol.
    For scanning, you can try the TWAIN-SANE drivers:
    http://www.ellert.se/twain-sane/

  • Low Memory when Printing Excel chart on LaserJet 3015 ll-in-one

    Low Memory when Printing Excel chart on LaserJet 3015 ll-in-one
    When I try to print a chart from Excel 2007 I get a low memory error. All other printing seems to work just fine. I thought it might be because of a color fill in the chart area so I removed the fill but I'm still getting the error.
    I've also cleared the fax memory and run through the steps in http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00378226&prodT...
    Running: Windows WP pro (SP3)
    Printer: LaserJet 3015 all in one
    Current driver: HP Lasetjet 3015 PCL 6
    Running as a network printer using a D-Link DP301P

    When an application is installed to the expansion card, that's the only place where you will see it in the app launcher screen, i.e. by selecting the card.  It will not appear in the All category because that only shows apps which are installed to internal memory.
    As for the Files application, yes, it only lets you browse contents of the card.  For a more robust file management utility which will let you browse your entire phone, you might want to look into a freeware application called FileZ, which I believe is available at www.palmgear.com and other places.
    I've never run Documents To Go from a card, but when you open Docs to Go and open the Menu > Options > Manage Applications, there is an option there to move applications to the Card.  Never having done that, I'm not sure whether it moves the whole DTG app to a card but, give it a try.
    I have oodles of applications and documents stored on my Centro's internal memory, and never have run up against a memory problem.  At any time, you can check available memory by going to the application launcher (home) screen, opening the menu, and selecting Info.
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • HP Laserjet 3015 won't print after Snow Leopard

    Ok, so I upgraded to Snow Leopard, and now I can't print anything on my Laserjet 3015. I've tried uninstalling the printer and then reinstalling it, but still nothing. It seems that any time I try to print it says the printer is "paused". If I press the "resume printer" button while the document is in cue, it doesn't resume the printing. If I delete the document and then press the "resume printer" button it shows that the printer goes back into a ready state. Any suggestions? Thanks!

    Both SL and HP have recently updated their software. Have you upgraded to SL 10.6.1 and the latest version of HP drivers?

  • Printing problem using HP Laser 3015 with OS 10.4.11 on MacBook

    Pauses when printing a set of PDF files on my HP Laser 3015. It takes forever to print a set of documents. This is not working for my business where sometimes I have anywhere from 60 to over 100 pages to print out 2 sets! Last week I printed out the first set that took a long time and copied the second set. Printer worked fine with the old reader. I would like to have that back!! But can't find it in my application folder. Can someone tell me how to get an old reader if there is not a solution to this printing problem.
    I reviewed all the settings on the print box and can't find the problem. I've read what to do in Adobe's help but it didn't tell me anything I already was doing. Does anyone have a solution to my problem? I sure would appreciate it.
    Diana

    I have had printing problem too many days ago.
    As far as I am concerned you may try the following: -
    - Verify your acrobat reader is up to date.
    - Verify your printer drivers if missing any.
    - Verify there shouldnt be any paper jam in the printer.
    - Verify your printer is connected properly.
    Verify that you have ink colors
    - In the printer.
    [spam link deleted by host]
    If these didnt help than it may be your printer problem, you may fix it show it to any hardware shop.

  • HP LaserJet 3015 not printing with 10.5.6

    I just upgraded from 10.5.5 to 10.5.6 and my HP Laserjet does not print. I removed it and added it back but when I try to print it always gives me the following error when the printer queue is trying to connect:
    Printer busy (status:0xe00002e9)
    Please help.
    HGCali

    <Is this because i just upgraded to 10.5.6? </i>
    No, probably not. I have no problems printing to my 3015 from 10.5.6.
    Is apple going to do something about this?
    Doubtful since it's almost certainly not Apple's problem, per se. Make sure you have the latest printer update, HP Printer Update 1.1.1, which should appear in Software Update if you haven't installed it and will probably appear in the "Installed Updates" pane of the Software Update preference. And if course if it's a networked printer you'll want to ping it to make sure that your system is actually reaching the printer.
    If you continue to have problems, you'll probably want to take it up with your IT people or with HP. But you can keep an eye on this thread and see if suggestions to the OP would apply in your case as well.

  • HP Laserjet 3015; Win 7; no duplex printing

    I just upgraded to a new computer with Windows 7 using my old Laserjet 3015 (3-in-1) printer. Old setup with XP I could print duplex (printing on both sides). Now I cannot with Win 7.. I checked both printer-properties and printer-preferences for duplex printing.,Doesn't do duplex. I downloaded a new (?) driver for PCL5, no change. Called HP Help, after 1/2 hour and checking  the same, did not help.
    Can anyone suggest what should I do?
    Thanks in advance
    Peter

    Hi Peter,
    Please check the Device Settings configuration:
    Enter Control Panel > Devices and Printers
    Right click the PCL 5 printer icon, then click Printer Properties.
    Click the Device Settings tab.
    Locate the Two-Sided Printing Accessory option - is it set as installed?
    If not, change the value to Installed.
    Can you see the Two-Sided printing option under the Printing Shortcuts / Finishing tab?
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Printer Options for HP LJ 3015 Not working

    Hi,
    I am unable to get the duplex option to appear for my HP LaserJet 3015 (all in one printer). This is my first mac (OS X 10.5.8). I have downloaded the latest driver and software from the HP web site. I've spent over an hour on the phone with apple support (who were wonderful) and also phone time with HP. No success. I've looked through the messages here (that I could find), but nothing seems to work (and I haven't found anything specific to the 3015). Duplexing is a must for me since I print large documents. Does anyone have any ideas or should I consider a new printer?
    Thanks.

    It is possible it does not support duplexing with the Mac OS. I originally used it with a PC and purchased the printer because of the duplex feature. If I can't duplex with it on the Mac I will likely get a new printer (which isn't ideal, but is possible for me to do...and I can donate this one to a non-profit so it is not wasted). I just thought I would ask here before making that more costly decision in case I was missing something. Thank you very much for your help.

  • How can i print barcodes on a laserjet 3015

    replaced a Laserjet 3005 with a Laserjet 3015.  Barcodes are not printing on Laserjet 3015.  Is this possible on this model? Is there a DIMM that I need to add?
    This question was solved.
    View Solution.

    Hi,
    i've met the similar problems before, and i found some important information on
    http://www.businessrefinery.com/products/barcode_net_win/upc_a.html
    you can got detailed imformation on it. it's really helpful.
    Good Luck!

  • After installing Mavericks I can no longer print to my hp Laserjet 3015 (latest driver is installed) but can print to my Canon Ink Jet.

    Can anyone help me or do I have to go back to Mountain Lion? I also can no longer connect to my external hard drive.

    Installing the new os may have tricked one of the three devices involved.  If it used to work, it will again.
    Reboot the printer.   Reboot the router.  On the pad, general, reset, reset network connections. 
    Make sure all the devices are on the same wifi network.   Talk nice to it.

Maybe you are looking for