HP 3052 A connect to Linksys WRT54G V8

How can I get an HP 3052A to connect to a Linksys WRT54G V8 wireless router?

Hi Vic4AU,
The Linksys WRT54G v8 router has a "Secure Easy Setup" button on it that might work with the WPS push button connection method on your printer.
From the front panel of the printer, navigate to wireless, wireless settings, WIfi Protected Setup, Push button. Press and hold the Cisco logo button on the router for 3 seconds once the front panel of the printer prompts you to.
If you are using the printer software to connect the printer to the network, another thing you can try is to login to your router and change the encryption to WPA or WPA2 or you can change the channel of the router to channel 11, then run the software again to see if the printer connects.
Please click the blue Kudos star in the post that helped you.

Similar Messages

Can connect to Linksys WRT54G but can't get to the internet.

PowerBook G4 17" 1GHz with OS 10.5.4
Linksys WRT54G v8.00.5
SpeedStream DSL Modem
I am having a strange issue. I am able to connect to my wireless network with my PowerBook and can see the Linksys setup page, but I cannot get on the internet. If I bypass the router I can get online with my PowerBook. If I use an ethernet cable connected to my Linksys I can get online with my PowerBook. My Sony Viao can connect wirelessly and get on the internet with no issue. My PlayStation 3 and PSP have no issues. It is solely this machine that is having the issue. I contacted Linksys and went through their troubleshooting to no avail.
Does anyone have any idea as to what the issue may be, or what I can try to resolve this issue? I have done everything I can think of and no luck. Any ideas?

Adam D wrote:
I pinged 208.67.219.99 and the following was returned:
PING 208.67.219.99 (208.67.219.99): 56 data bytes
64 bytes from 208.67.219.99: icmp_seq=0 ttl=47 time=88.752 ms
No error message was returned.
I plugged the IP address into Safari and, although there were 27 errors, the page loaded. I hadn't tried that before. Interesting.
The fact that the ping worked means you are connected to the Internet, and what is likely failing (causing the "You are not connected" message) is DNS name resolution.
DNS name resolution is what converts names like "www.opendns.com" to numbers, like the numbers I gave above, 208.67.219.99.
Changing your system to use the OpenDNS DNS servers, as directed above, will fix the name resolution issue on your system.

Problem with AEBS-N connecting to Linksys WRT54G over WDS

I have been trying -- without success -- to connect a new Airport Extreme Base Station-N to an existing Linksys WRT54G. The two devices can communicate over WDS without any encryption but they will not connect via WDS using WPA or WPA2.
The two MacBooks and the WinXP desktop work fine with the WRT54G over WEP, WPA, or WPA2. All three computers can communicate with the AEBS. The problem is getting the WRT54G and AEBS to communicate over WDS with encryption other than WEP.
Phone calls to tech support at Apple and Linksys were not productive. The Apple rep walked through all the steps to have AEBS-N join a network via WDS and he found no errors in my setup. He then connected me to the next level support for additional help. The second Apple wireless support tech reviewed the situation and said he had no additional information. Both Apple and Linksys support reps suggested I to "call the other company if their device isn't working" or "post feedback so the developers will be aware." Apple tech support had no details (or none they are willing to share) about how WDS works under WPA/WPA2 in their product; I asked for specific details thinking that a third-party Linksys firmware might offer additional modifications to make the two devices compatible. The Linksys rep was similarly unhelpful in giving WDS details.
I am fine with using a third-party firmware for the WRT54G if someone has the settings to make these two devices work together.
This is frustrating because both Apple and Linksys tech support said their products will run WDS under WPA or WPA2 but only with their own products. I suspect each firm has created proprietary WDS implementations because WDS is only a mechanism and not a technical standard (www.ieee802.org/1/files/public/802architecturegroup/802-11/4-address-format.doc).
I would appreciate any information that might allow upgrading from WEP to WPA/WPA2.
Details:
AEBS: model A1143, firmware 7.3.2
AirPort Utility v5.3.2
WRT54G: version 4 (first four of S/N: CDFA), Linksys firmware 4.21.1
Desktop: Dell Dimension 4800, WinXP-SP3, Linksys WUSB54G (USB wireless access)
Macbook #1: new aluminum Macbook (late 2008), OSX 10.5.5
Macbook #2: white Macbook (mid-2008), OSX 10.5.5
(I am happy to post additional tech details and/or log files upon request).

Done. I powered off the Airport Extreme Base Station, restarted it and AirPort Utility, and connected to the MacBook via ethernet cable. I then used AirPort Utility to turn off the Airport wireless connectivity in the Extreme Base Station and configured it in Bridge Mode. The Base Station restarted and showed a green light. However, when I went to reactivate Airport as "join WDS network," the light continued to glow green but, there were obvious network problems:
- ping command to the Airport Extreme Base Station resulted in 100% packet loss, even if the AEBS was connected to MacBook by ethernet cable
- turning off MacBook wireless connectivity resulted in the MacBook being able to see the AEBS, but the AEBS cannot connect to the Linksys router

IMac loses wireless network connection intermittently - Linksys wrt54g v.5

I' ve setup a new 17" iMac for my folks, runs great with this big exception - it will spontaneously, but regularly lose connectivity with my Linksys WRT54G v.5 router (usually after sleep, but not always - and sometimes when starting cold). Restarting the iMac, fidgeting with internet connect, etc. will not fix the problem. ONLY power cycling the Linksys router will allow the iMac to once again see the network. Once the router is recycled, the network reappears with its strong signal indicator in the menubar (the iMac is maybe 20 feet from the router). When connected, network performance and quality are at expected levels (ie, no slow d/l speeds etc.).
To make it interesting, I also have a PC running XPsp2, that experiences NO network hiccups when the iMac loses connectivity. And the iMac does this whether or not the PC is on, etc. But if I turn the PC on when the iMac cannot connect, the PC has no problem joining the network or accessing resources.
In otherwords, I sense a problem between the Linksys router and the iMac (either the Airport card or OS X).
I HAVE upgraded the Linksys firmware, upgraded all Apple software, changed router channels, and tried both WEP and WPA Personal, all to the same result. I have also scoured every corner of Apple and Linksys boards, only to find many people with this same issue and no answers.
Brownie points for answers!
17" Intel iMac Mac OS X (10.4.7)
17" Intel iMac Mac OS X (10.4.7)
17" Intel iMac Mac OS X (10.4.7) Linksys WRT54g ver.5

Well, so far so good!
I would never have found the preferences, so thank you thank you thank you for that Sherry. I never did delete ALL the prefs, just the ones obviously labeled as network related. But so far, no dropouts for 2.5 days. If Apple has anything up detailing this procedure, I sure couldn't find it - so you saved me there. I thought we left all the "delete prefs" solutions behind with OS 9.
BUT, I was a bad boy and actually made two changes at once. Not recommended procedure, I know, but I was desperate. In addition to deleting/recreating the above prefs, I also changed the router from Channel 1 to Channel 11. Maybe the Airport card likes Chan. 11 in this application? Dunno if this was part of the solution, but worhwhile info for anyone else in the same situation.
Thanks again Sherry, I've marked "helpful" and "solved" accordingly.
17" Intel iMac Mac OS X (10.4.7) Homebrew Athlon XP 2800+, Winders XP sp2

Will the iPad Mini connect to LinkSys WRT54G Router

Will the iPad Mini connect Via WiFi to a LinkSys Wireless G Braodband Router?
The model is WRT54G V5, SN CDFBOE865514 and Firmware is the latest 1.02.8 dated 5 Oct 2009
My wife's iPad 2 connects to it well but we have been unable to connect the new iPad Mini to it.
I have read in some of your notes that the Mini will only connect to Firmware 1.02.8n.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

New mac wont connect to linksys WRT54G

i have tried everything. restarted router, tried all the passwords, WEP keys with and without the $ signs in front. i get invalid password sometime, and sometimes i get could not connect to router. i would appreciate any help

Start from scratch.
Yell out the window and scream, "I am fed up, and I can't take it anymore" (optional)
Plug the power into its socket
Plug the Ethernet plug that goes to the Internet into the uptake, or Internet port.
Hold the reset button for 30 seconds.
Turn off Airport in your computer, if that is what your using, as you will need to use your eithernet port on your computer instead.
Put an eithernet wire into one of the other ports on the router and connect it onto the computer.
At this point, go to network preferences and copy the router number.
Open a window or tab into eihter Safari or Firefox and paste the router number into the location. The http:// should be the only other item that you should see in the location bar.
The password will be "admin"
From here, you will put in the information that you will need, which should be what ever your ISP requires.
Then before you do anything else, test it, first with the current connections. If that works, and you want to use the wi-fi, turn on airport, but make sure that you disconnect the Ethernet cord, as your computer could use that over wi-fi.
If that works, bow , and say, "I am not worthy," three times.
Put away your Ethernet cord and place offerings or sacrifices to the linksys.

Verizon DSL modem not connecting through Linksys wrt54g

I recently switched to verizon DSL from comcast. The verizon modem when connected directly to the back of my mac works amazingly well. Now i was to be able to connect with my laptop and xbox360 wirelessly which was not a problem with comcast. So i take the Ethernet/Data/Modem cable(what ever you want to call it) from the modem and connect it to the INTERNET port on the back of the router. Then take another ETHERNET cable and connect it from the first WAN port to the back of my computer where the modem was originally directly connected. The routers internet light is on as is first ethernet light on the front of the router. And all three lights on the modem are on; internet, data, and dsl. The macintosh is now not able to connect to the internet. The laptop can connect to the network but not to the internet.(says local only) It seems like a lot of people have had this same problem but i have yet to see a solution. and again when i take the cord from the modem to the router and change it back to connecting the modem directly with the home computer (mac) the internet works fine. I know this seems very dumbed-down and a dumbed-down kind of answer is preferred. I have been fixing problems with our home network for years now and have never come across something that stumped me while the solution seems like it would be so simple.

If you have Verizon DSL and you wish to configure your router and connect the XBOX360 wirelessly, then, first thing you should do is to fully bridge your modem, then connect your modem to the internet port of the router and configure your router's internet connection type to PPPoE...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
When the router’s web-based setup page appears, click Setup then look for Internet Connection Type and select PPPoE on the drop-down arrow.
Enter the username and password that your ISP provided you in the User Name and Password fields, including the domain in the username if necessary such as [email protected] and CLick Save Settings.
Click Status then look for Login Status and check it says Connected. If it’s connected, you should be able to access the Internet.
NOTE: If the Login Status says Disconnected, click Connect, then check if you’re receiving an error message.
If you get an error meaasge follow this link
For xbox -
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
1) On the first line in Application box type in ABC, in the start box type in 53 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box, click Save Settings once done...
2) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
3) Click on set-up and change the MTU Size to 1452 and click Save Settings...
4) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox
IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
5) Also assign the DNS Addresses on the Xbox
Primary dns :- 4.2.2.2...Secondary dns :- 192.168.1.1
6) Turn off your modem, router, and Xbox...Wait for a minute...
7) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...
IP Address: 192.168.X.[last part of ip in your device] e.g. if static ip given to the device was 192.168.X.10 get the last part and put that to the empty box.

IMac will not connect to LinkSys WRT54G

Greetings all:
I'm new to Macs as of about 2 hrs ago. I've been a PC geek for too long. I have a home network set up with a wired PC and a a wireless laptop PC, and I just took delivery of my new iMac. It will recognize my network (and a few others) but will not connect to it. The iMac won't connect, stating that the password is incorrect. Not really sure how to proceed. I've read through a bunch of posts, and it sounds like most people are able to connect, and then have occasional disconnects. The router is up to date re: firmware. The router is too far away from the iMac to connect an ethernet cable to.
Any suggestions are greatly appreciated.
iMac Core 2 Duo 2.33 - 2 GB Mac OS X (10.4)

Welcome to Discussions, Kayexalate!
I assume you mean that during the "Welcome" setup process you were denied access. That is always the case if you're trying to join a "closed" network. Even for other reasons it's possible to get that message. First, open the Application "Internet Connect" and set it to "Show AirPort status in menu bar" and then close and quit Internet Connect.
Use the "AirPort" beam icon in the menu bar to Turn AirPort On, and if, as you found, it will not connect - open and select "Other..." and in the box that opens, first use the "Wireless Security:" selector to duplicate your network's security method and then enter the name and password of the network. Click the "OK" button and that should allow the connection, as well as (due to the default settings in place) enter your network as a "preferred network" in the "AirPort" pane of the Network panel of System Preferences.
Message was edited by: myhighway

Lan connection to Linksys wrt54g

I cannot connect a new Mac Mini to my home network. I'm working from a Windows background. My router is connected via ethernet to mac. my router is set to automatically give out ip addresses w/dhcp in 192.168.1.100 range. I've tried dhcp automatic and manual with no success. Also does mac support wep and how do I enter wep password?

Hi Jill, and a warm welcome to the forums!
Great advice to try first already given.
WEP can be broken in under a minute these days, so it's actually no protection at all, but if you wish to try it after the above, then make sure the WEP PW is either 5 or 13 characters long, or 10 or 26 HEX digits, safest way to enter them is like this...
"passw"
$1a2b3c4d5e

Can no longer connect to internet wirelessly with Linksys WRT54G...

Hi, all...
I'm at my father-in-law's house. His home network setup is as follows:
* Compaq desktop connected via Ethernet cable to
* Linksys WRT54G, v3 (IP 192.168.2.1) connected via Ethernet cable to
* Westell DSL modem provided by SouthEast Telephone (his ISP - IP 192.168.1.1)
I set this equipment up for him about 18 months ago. His Compaq desktop connects perfectly to the internet, using the setup I described above, which I set up for him about 18 months ago. I *used* to be able to connect to the internet wirelessly (with both my IBM ThinkPad and my MacBook; my bro-in-law *used* to be able to connect to the internet wireless (with his Dell laptop).
For reasons we don't yet understand, neither of us can connect wirelessly to the internet any longer. I have called Linksys, posted to their board, and read other threads here, so I am aware that MacBooks have some issues with Linksys routers. I'm getting ready to phone my father-in-law's ISP, to see if they can help.
But... I don't understand why this used to work, but doesn't any longer. I would be very grateful for any help any of you great folks could provide, and I will gladly post here any detailed info on the setup that might be of help!
Many thanks,
Bill J.
MacBook 2.0 Mac OS X (10.4.8) iMac 17in Core 2 Duo 2.0, AirPort Extreme, AirPort Express, IBM NetVista M42

Thanks for your reply.
Actually the Linksys 2Wire modem works fine in OSX and when connecting via a Compaq PC I also have in the house. It is just on the MacBook running XP that it fails to "connect". XP see's the network but cannot connect.
Also, I downloaded again bootcamp and created a fresh driver CD, reinstalled the driver and received the same error: 1706 No valid source could be found for product Macintoish Drivers foir Windows XP.msi.
I looked at the directory on the CD and it appears that there are no driver files, only documentation.
I called Apple, got no help, called Microsoft, spent 1.5 hours talking to them
they were no help either.
I sent a messge to the bootcamp beta mail address informing them that it seems the drivers are not being downloaded with bootcamp.
Thx again.

Can't use my HP Deskjet F4580 Wireless Printer with the AirPort Extreme Base. The printer is NOT connected at the USB port of the AirPort Extreme, and is placed in another room. It worked just fine with my previous router (Linksys WRT54G). Help me!

Hey Guys!
I just got my AirPort Extreme Base, but I can't use my HP Deskjet F4580 wireless printer with it.
The printer is not connected to the AirPort Extreme's USB port. It is placed in another room, and I'd like to use it (the printer) wirelessly (not connected to the USB port os the AirPort Extreme), as I used to. There is no place for the printer close the AirPort Extreme. It worked just fine with my previous wireless router (Linksys WRT54G). I'm very disappointed with the AirPort Extreme Base Station because of that!...
Can you help me? Please?!
Thanks Folks!

This must be a tough one, no suggestions at all.

Unable to access wireless connection with linksys rooter WRT54GS

Hi,
I just installed a wireless rooter Linksys WRT54GS on my connection, The problem I have is being able to access it with my wireless on my laptop.
I kept getting a message stating "connection unindentified" "access limited". I've done most of what is already suggested on your forum such has turning the power off of my rooter, my modem and such and still nothing. I'm able to access the wireless with my girlfriend Mac Notebook, my playstation 3 and my desktop computer which uses Windows X. First I thought that it my be a problem with my security but even when the connection is unprotected I still get that error. I try to disable the IpV6but that didn'tdo anything either.
My laptop is a Toshiba Qosmio X300 PQX32C-033019 with Vista and my rooter is a Linksys WRT54GS vers. 6
Here's my connection log, sorry if it's in French:
Informations sur l'ordinateur
Vendor:TOSHIBA
Machine Name:Qosmio X300
VersionQX32C-033019
CPU Maker:GenuineIntel
CPU Name:Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz
CPU Clock:2267
CPU Base Clock:2267
OS:Microsoft® Windows Vista™ Édition Familiale Premium
OS Build:6001
OS SPervice Pack 1
Ram:4188120
Début de la page
Informations IP
ipconfig /all
Configuration IP de Windows
Nom de l'h“te . . . . . . . . . . : PC-de-ThomasMur
Suffixe DNS principal . . . . . . :
Type de noeud. . . . . . . . . . : Mixte
Routage IP activ‚ . . . . . . . . : Non
Proxy WINS activ‚ . . . . . . . . : Non
Liste de recherche du suffixe DNS.: phub.net.cable.rogers.com
Carte r‚seau sans fil Connexion r‚seau sans filÿ:
Suffixe DNS propre … la connexion. . . :
Description. . . . . . . . . . . . . . : Intel(R) Wireless WiFi Link 5100
Adresse physique . . . . . . . . . . . : 00-21-5D-3D-9C-08
DHCP activ‚. . . . . . . . . . . . . . : Oui
Configuration automatique activ‚e. . . : Oui
Adresse IPv6 de liaison locale. . : fe80::a9d9:4618:2ae4:d7e5%11(pr‚f‚r‚)
Adresse d'autoconfiguration IPv4 . . . : 169.254.215.229(pr‚f‚r‚)
Masque de sous-r‚seau. . . .ÿ. . . . . : 255.255.0.0
Passerelle par d‚faut. . . .ÿ. . . . . :
Serveurs DNS. . . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS sur Tcpip. . . . . . . . . . . : Activ‚
Carte Ethernet Connexion au r‚seau local :
Suffixe DNS propre … la connexion. . . : phub.net.cable.rogers.com
Description. . . . . . . . . . . . . . : Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Adresse physique . . . . . . . . . . . : 00-1E-EC-3F-7B-CF
DHCP activ‚. . . . . . . . . . . . . . : Oui
Configuration automatique activ‚e. . . : Oui
Adresse IPv6 de liaison locale. . : fe80::4da:b21b:843c:7bfd%10(pr‚f‚r‚)
Adresse IPv4. . . . . . . . . . . : 192.168.1.100(pr‚f‚r‚)
Masque de sous-r‚seau. . . .ÿ. . . . . : 255.255.255.0
Bail obtenu. . . . . . . . .ÿ. . . . . : 8 juin 2009 18:11:58
Bail expirant. . . . . . . . .ÿ. . . . : 9 juin 2009 18:11:58
Passerelle par d‚faut. . . .ÿ. . . . . : 192.168.1.1
Serveur DHCP . . . . . . . . . . . . . : 192.168.1.1
Serveurs DNS. . . . . . . . . . . . . : 64.71.255.198
NetBIOS sur Tcpip. . . . . . . . . . . : Activ‚
Carte Tunnel Connexion au r‚seau local* :
Statut du m‚dia. . . . . . . . . . . . : M‚dia d‚connect‚
Suffixe DNS propre … la connexion. . . : phub.net.cable.rogers.com
Description. . . . . . . . . . . . . . : isatap.phub.net.cable.rogers.com
Adresse physique . . . . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP activ‚. . . . . . . . . . . . . . : Non
Configuration automatique activ‚e. . . : Oui
Carte Tunnel Connexion au r‚seau local* 6 :
Statut du m‚dia. . . . . . . . . . . . : M‚dia d‚connect‚
Suffixe DNS propre … la connexion. . . :
Description. . . . . . . . . . . . . . : Carte Microsoft ISATAP #2
Adresse physique . . . . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP activ‚. . . . . . . . . . . . . . : Non
Configuration automatique activ‚e. . . : Oui
Début de la page Informations de routage
route print
===========================================================================
Liste d'Interfaces
11 ...00 21 5d 3d 9c 08 ...... Intel(R) Wireless WiFi Link 5100
10 ...00 1e ec 3f 7b cf ...... Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
1 ........................... Software Loopback Interface 1
13 ...00 00 00 00 00 00 00 e0 isatap.phub.net.cable.rogers.com
12 ...00 00 00 00 00 00 00 e0 Carte Microsoft ISATAP #2
===========================================================================
IPv4 Table de routage
===========================================================================
Itin‚raires actifsÿ:
Destination r‚seau Masque r‚seau Adr. passerelle Adr. interface M‚trique
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.100 20
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
169.254.0.0 255.255.0.0 On-link 169.254.215.229 281
169.254.215.229 255.255.255.255 On-link 169.254.215.229 281
169.254.255.255 255.255.255.255 On-link 169.254.215.229 281
192.168.1.0 255.255.255.0 On-link 192.168.1.100 276
192.168.1.100 255.255.255.255 On-link 192.168.1.100 276
192.168.1.255 255.255.255.255 On-link 192.168.1.100 276
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 192.168.1.100 276
224.0.0.0 240.0.0.0 On-link 169.254.215.229 281
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 192.168.1.100 276
255.255.255.255 255.255.255.255 On-link 169.254.215.229 281
===========================================================================
Itin‚raires persistantsÿ:
Aucun
IPv6 Table de routage
===========================================================================
Itin‚raires actifsÿ:
If Metric Network Destination Gateway
1 306 ::1/128 On-link
10 276 fe80::/64 On-link
11 281 fe80::/64 On-link
10 276 fe80::4da:b21b:843c:7bfd/128
On-link
11 281 fe80::a9d9:4618:2ae4:d7e5/128
On-link
1 306 ff00::/8 On-link
10 276 ff00::/8 On-link
11 281 ff00::/8 On-link
===========================================================================
Itin‚raires persistantsÿ:
Aucun
Début de la page Informations de protocole
Protocol Bind Information
SSTP based VPN
Microsoft TCP/IP version 6 - Tunnels
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
isatap.phub.net.cable.rogers.com
Internet Protocol (TCP/IP) - Tunnels
Microsoft NetbiosSmb
Internet Protocol Version 4 (TCP/IPv4)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 4 (TCP/IPv4)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 6 (TCP/IPv6)
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
Internet Protocol Version 6 (TCP/IPv6)
isatap.phub.net.cable.rogers.com
Internet Protocol Version 6 (TCP/IPv6)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 6 (TCP/IPv6)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Remote Access IP ARP Driver
Miniport WAN (IP)
Message-oriented TCP/IP Protocol (SMB session)
WINS Client(TCP/IP) Protocol
Internet Protocol Version 4 (TCP/IPv4)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 4 (TCP/IPv4)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 6 (TCP/IPv6)
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
Internet Protocol Version 6 (TCP/IPv6)
isatap.phub.net.cable.rogers.com
Internet Protocol Version 6 (TCP/IPv6)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 6 (TCP/IPv6)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 6 (TCP/IPv6)
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
isatap.phub.net.cable.rogers.com
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 4 (TCP/IPv4)
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Remote Access IPv6 ARP Driver
Miniport réseau étendu WAN (IPv6)
Point to Point Protocol Over Ethernet
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Point to Point Tunneling Protocol
Layer 2 Tunneling Protocol
Remote Access NDIS WAN Driver
WAN Miniport (SSTP)
Carte asynchrone RAS
Miniport WAN (PPPOE)
Miniport réseau étendu WAN (PPTP)
Miniport réseau étendu WAN (L2TP)
Link-Layer Topology Discovery Mapper I/O Driver
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Link-Layer Topology Discovery Responder
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
NDIS Usermode I/O Protocol
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Début de la page Informations sur les équipements
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Device ID : PCI\VEN_10EC&DEV_8168&SUBSYS_FF001179&REV_02\4&492937F&0&00E2
Status : Enable
Driver Vender : Realtek
Driver Version : 6.205.403.2008
Driver Date : 4-3-2008
Intel(R) Wireless WiFi Link 5100
Device ID : PCI\VEN_8086&DEV_4232&SUBSYS_12018086&REV_00\4&3905AE0C&0&00E3
Status : Enable
Driver Vender : Intel
Driver Version : 12.0.0.73
Driver Date : 4-27-2008
Bluetooth
Device ID : ACPI\TOS6205\5&F592293&0
Status : Disable
Bluetooth Version : v6.10.07.2(T)
Début de la page Statut du commutateur de communications sans fil et de la touche d'accès direct pour réseau sans fil
Wireless Communication Switch : On
Wireless Hotkey (Fn + F8)
Wireless LAN : On
Solved!
Go to Solution.

Try this -
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
On your Vista Laptop, first disable the Wireless Network Connection and restart the Laptop, then Enable the Wireless Connection...
Then Click on Start >> Control Panel >> Network and Sharing Center >> Manage Wireless Network and click on Add, select Manually Create a Network Profile and click Next, enter your Network SSID/Network Name, select WEP for Security type and enter your 10 digit Network Key and click on Next, it should say "Successfully Connected to ____" close all the Windows and restart the Laptop, now see if you can connect to Internet Wirelessly...

Cant connect IPOD to linksys WRT54G router

Hi, i have a LINKSYS WRT54G router .. i bought an apple ipod touch recently and i am unable to connect it to my wifi network. My ipod detects the wifi network but when i select it , it asks for password. now i dont know which password is this bcoz everytime i poer on my computer or laptop i never type a password b4 accessing internet.. it is auto connected. i know the admin password for my router but that is denied by ipod to connect to internet. Is there any other password we have to give for connecting deveices through LINKSYS or some changes i need to do in my connection ? PLzz help plzzzzzzzzzzzzz

you can go to this link for instructions on how to get your wireless password:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=3698

Problem Connecting Linksys WRT54G to Arris TM402P/100 Cable Modem

The Problem
Cannot get an internet connection attempting to install a Linksys WRT54G router between an Arris TM402P/100 cable modem and the local network.
Prior Configuration
Previously had DSL, with the Linksys WRT54G wireless router between the DSL modem and the local network, which worked perfectly.
New Configuration
This friend recently changed his broadband from DSL to Comcast cable, and he also has phone and television service over the same connection. The installation tech connected the cable modem directly to a desktop computer and left the Linksys router out.
The direct connection between the cable modem and the computer works fine, but he and his wife each have laptops and would like to us the Linksys router to connect wirelessly.
This is the TCP/IP configuration of the FAMILY workstation connected to Comcast
directly through Arris TM402P/110 cable modem:
Windows IP Configuration
       Host Name . . . . . . . . . . . . : family
       Primary Dns Suffix . . . . . :
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . : No
       WINS Proxy Enabled. . . .. : No
       DNS Suffix Search List. . .. : hsd1.wa.comcast.net.
Ethernet adapter Local Area Connection:
       Connection-specific DNS Suffix . : hsd1.wa.comcast.net.
       Description . . . . . . . ...... . . . : Intel(R) PRO/100 VE Network Connection
       Physical Address. . . . . . . . . : 00-11-11-6F-FB-69
       Dhcp Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
       IP Address. . . . . . . . . . . . : 67.185.155.0
       Subnet Mask . . . . . . . . . . . : 255.255.254.0
       Default Gateway . . . . . . . . . : 67.185.154.1
       DHCP Server . . . . . . . . . . . : 68.87.69.10
       DNS Servers . . . . . . . . . . . : 68.87.69.146
                                                    68.87.85.98
       Lease Obtained. . . . . . . . . : Tuesday, January 09, 2007 5:39:26 PM       Lease Expires . . . . . . . . . . : Friday, January 12, 2007 9:58:23 AM
I cannot find a configuration on the Linksys WRT54G that will allow me to connect to the internet through the Arris TM402P/110 modem. Have tried (1) setting the Linksys to use a dynamic WAN address, (2) setting the Linksys to static IP 67.185.155.0 with TCP/IP settings taken from the above configuration, (3) cloning the MAC address of the desktop computer's NIC and trying both (1) and (2) again.
The error message says that the network cable is not connected. Is it possible that the connection between the router and cable modem requires a cross-over cable?
Any suggestions?

on the router's ui... keep the internet type to dhcp....clone the mac address and then do a power cycle...ensure that the modem is completely powered off during the power cycle...if you have a battery back - up , remove the battery...after a minute , put back the battery and then plug in the power cable in the modem...
let me know if this helps you....

Linksys wrt54gs randomly dropping connection

I have a linksys wrt54gs wireless g router. it just started dropping connection randomly. I was playin xbox live one day, and i lagged out. noticed pc internet was gone too.... so whats causing this? i just updated FW as well. i have the xbox and my pc connected wired. PC in the other room wireless, but doesnt work, hasn tworked fo rlong time. shows its connected, but no interent access...
anywasy main problem righ now is it dropping all connections at random times. i'll unplug and replug teh router and modem back in, it'll work for a lil bit, but on xbox live, it lags out and disconnect sin a few minutes

As you upgraded the router's firmware,I would suggest you to reset the router and reconfigure all the settings from the scratch.... On the setup page,reduce the MTU value to 1365 and click on save settings...Under the Wireless tab,Change the SSID(Network Name) to some unique name and channel to 11-2.462 GHz and click on save settings...Under the Advanced Wireless Settings
Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...Now,power cycle the router and check...

HP 3052 A connect to Linksys WRT54G V8

Similar Messages

Maybe you are looking for