Hp 3052 all-in-one software for windows 8 32-bit and 64-bit

I have a 3052A and windows 8 32 bit.

OK... and your question is????
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

C6280 All-in-one driver for windows 8.1 - unalbe to select automatice 2 sided printing

I downloaded and installed the driver and full photo print for my old all-in-one but now I don't have the option for automatice two-sided printing.
Is there a different driver specifically for the C6280 printer I can download?
pennyph

Hi @pennyph,
Thank you for visiting the HP Support Forums! I see you have recently installed the full feature software and drivers for your HP Photosmart C6280 and now you do not have the option for two sided printing (Duplexing).
I would like you to start here: Printing on Both Sides of the Paper (Duplexing) in Microsoft Windows
Please make sure you have enabled the two-sided printing module (duplexer):
1. Go into the Printers and Faxes folder.
2. Right-click the device.
3. Click Properties (not Printing Preferences).
4. Open the Device Settings tab.
5. If the duplex unit shows Not Installed, click Not Installed.
Change it to Installed.
The Automatic selection is added to the list of Two-sided printing options in the Printing Preferences (not Printer properties).
I hope this helps! Let me know if you have anymore questions.
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

X64 series officejet all- I one software for Linux OS/running Ubuntu

Everything works fine on my 4200 series all-in-one but the scan function. I am running under Linux using Ubuntu. I see only software updates applicable to Windows, so how can I get my machine to communicate with my Acer laptop so as to scan in photos, etc?

Hi,
What is the exat printer model?
IS it the HP Laserjet 4200 model?
If so, I afraid that scanning is not supported for your printer for Linux, but only print capabiltiies are available.
Please check Summary of Available Features in Various Linux Distributions below, scan is not supported for this model for any Linux OS:
http://hplipopensource.com/hplip-web/models/laserjet/hp_laserjet_4200.html
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hp officejet 4255 all in one drivers for windows 7

I HAVE HP 4255 OFFICEJET DRIVER FOR WINDOWS XP BUT WHEN CHANGED MY OS TO WINDOWS 7 I AM NOT ABLE TO INSTALL THE SAME -- AN ANYBODY POST THE DRIVER SUITABLE TO THE PRINTER WITH WINDOWS 7 OS? THANKS ALANGADAN

hi there,
This link should have the software required. Just select your operating system from the dropdown and download. Let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Am looking for driver to install HP All in one 2050 for window 7

please install my printer into this computer!

Hi @sentichris, and thanks for reaching out to the HP Forums! I can happily help you install your Deskjet 2050.
You can either install the full feature software with the link below, or you can use the HP Printer Install Wizard for Windows
The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
DJ2050_J510_1313-1.exe
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Uninstall and reinstall hp7400 all in one to my windows xp computer and cd rom will not run

I have a HP 7410 All in one, I uninstalled the software, when I went to reinstall the cd-rom would not run. Do I need to update drivers. My operating system is Windows xp

Hi @Alex322,
Welcome to the HP Forums!
I see that you are trying to reinstall your HP Officejet 7410 on Windows XP, and that the CD will not run. I am happy to help you with this reinstallation issue!
I would recommend to download the software at this website, HP Officejet and Photosmart Full Feature Software and Drivers, and we will see what happens!
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP PSC 2410 All-In-One - use in Windows 7 64-bit environment

Hi,
I have had this HP PSC 2410 All-In-One printer for some years now and it has worked pretty flawlessly in a Windows XP Pro SP3 environment for that time.
Some months ago, I purchased a new computer system and went to the Windows 7 64-bit OS (not interersted in Windows 8 at all) and whilst I have installed the printer successfully and it works, the software suite that came with the printer on the CD will not install for this environment and therefore I no longer have access to the various Maintenance Options that were available under the Windows XP Pro OS, such as the cleaning and Fax options.
Searching for something for the Windows 7 64-bit OS threw up two options - the driver update and the utilities tool wizard. After going down the driver update route, no software suite was available and in fact the update stated that the driver was installed by Windows 7 automatically. That seems to be the case as the printer works fine in print mode, scan mode (from the desktop menu) and it detects SD cards through the slots.
However, there is no software to allow me to fax or clean or do any of the other options available under the HP Suite that came on the CD.
Going down the Utility route got me downloading a file - HPPIW.EXE - that would look at my current printer installation and check with HP for any updates. After many attempts, the utility simply CANNOT find my printer even though it is installed, works properly and even windows sees it! No amount of recycling the ON/OFF button or rebooting the computer allows this utility to detect the printer at all. It is installed via USB on the Windows 7 64-bit Family PC and windows updates are always fully updated.
I am currently considering the purchase of a new HP OfficeJet 8600 Pro Plus to use as the family printer with the Windows 7 system - and move this HP PSC 2410 upstairs to connect it directly to my Windows XP Pro SP3 personal desktop and use the original CD to install it. My Canon IP4200 Pixma has just died on my personal PC upstairs.
However, until I do that, is there any of the Software Suite available that would work in the Windows 7 environment that would allow me to use the various functions such as Fax and cleaning that were available under the old XP environment and obtained via the CD? Was the Suite of software ever updated for Windows 7?
Thank you,
Lee James
West Sussex UK
This question was solved.
View Solution.

Hi BAW9DV,
I hate to hear you are having issues. While there will not is not a specific software utility that will complete the tasks desired, maintenance can be completed from the front panel of the unit. Windows also has an application for faxing from the computer as well that may work with this device. Please see the information below that may enable the functions desired.
Faxing:
1. Use Windows Fax and Scan
   A. Type Windows Fax and Scan into search box
   B. Configure fax machine for use. Click Here to view Microsoft documentation for use. Note: This is a 3rd party website. HP and I are not responsible for content of this site.
   C. Select New Fax
Maintenance tasks from front panel:
Running the Clean Print Cartridges Utility Click Here
Printing setf-test page Click Here
Evaluate test page Click Here
Align the Cartridges: Press setup-Press 5, then press 2
If you the work around options are not acceptable the 8600 model would most certainly meet your needs when compared with this unit. However I encourage you to contact HP to see what upgrade options are available for this unit. It will most likely be another Photosmart model/type unit, but in many cases upgrades are offered at a discounted rate to our valued out of warranty customers. Global contact information can be accessed Here.
P.S. If you upgrade through technical support, be sure to ask about carepacks. Extended warranties may also be available at a discounted rate for upgrading.
Hope this helps!
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
I work for HP.

HP 6110 All-in-One - Software availability

A friend gave me a used HP 6110 All-in-One, but did not include an installation disk or power cable. Where can I download the software? Please give me the link. Can I use any USB power connection cable or is there a product spesific transformer-type power cable available?

Hello CrossBear,
Welcome to the HP Support Forums.
Regarding the HP Officejet 6110 inquires you have about the USB cable and software, I would like to help. The USB cable needs to be USB 2.0 A-B, they are not product specific.
HP Officejet 6110 All-in-One Printer Drivers is where you can download the software and drivers for your Operating System if available. This printer does not have full feature software for Windows Vista, 7 and 8 for example.
Let me know if this has helped.
Thanks,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Installation fail for HP c4780 in All in One software Windows 8.1

I downloaded and attempted to install
PS_AIO_06_C4700_140_408
into Windows 8.1
The install fails part way through with the message box
Message box header contains: ....\Setup\hpzsh...
Message box content displays: The system can not find the file specified
Clicking close ends the the install with no further messages.
I attempted to use HP Print and Scan Doctor. The software apparently identifies the C4780 with the help of an installed basic printer driver (which also indicates that it can not find the specificed file and crashes but leaves a printer driver installed. This basic printer driver allows me to pull up its web page). HPPSD then indicates that it is downloading the appropriate All in One software. Downloading commences but after several minutes then stops with a failed download message.
I have to admit that I am rather disappointed with all the hoops I am having to perform to get a supposedly compatible printer installed.
I'd appreciate some help.
Thank you

Hello jmayoral,
Welcome to the HP Support Forums!
I see you where able to locate a solution to the file not found error you got while installing the Photosmart C4780 on the thread: I cannot install my HP Photosmart C4780 - I can't install my drivers and the HP solution center. Was there anything else you need a hand with?
Thanks for posting,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Portal drive software for Windows 7 (64-bit)

Hi...Experts
We could not find the portal drive software for Windows 7 (64-bit) OS on service market place. The one which is available on market place is working fine for Windows 7 (32-bit ) but it does not work for 64-bit.
Can any one help us to get the 64-Bit Portal Drive
Rgds
PR

1- Set BasicAuthLevel's value to "2" by expand HKEY_LOCAL_MACHINE >> SYSTEM>>CurrentControlSet>>Services>>webClient>>Parameters
2- Restart your computer.
3- Right click "Computer" and click "Map network drive..."
To Letter Field: Set a free drive letter.
To Folder Field: Assume that your webDav address is http://abc.com:50000/irj/go/km/docs/ change it to
abc.com:50000irjgokmdocs
4- Enter your ID an Password
thats all...
Note: The mapping is as follows:
0 - Basic authentication disabled
1 - Basic authentication enabled for SSL shares only
2 or greater - Basic authentication enabled for SSL shares and for non-SSL shares

Issue while Installing Oracle Data Access Software for Windows

All,
Iam getting the following error while installing Oracle Data Access Software for windows. Iam installing in WindowsXP, with Oracle 9i release 9.2.0.7.0 DB and client in the same Box.
It shows
The Specified Key key was not found while trying to GetValue
* Stop installation of all Products
* Stop installtion of this componenent only.
Kindly let me know why this error is showing up.
Regards
Ramesh

Most probably you have hit this issue:
"If you have more than one Oracle Home installed on the same machine (e.g. Oracle8i client and Oracle9i Release 2 client), use the Oracle Home Selector to run your applications with Oracle9i Release 2 client. "
As documented on the Oracle Data Access Software for Windows. Release 9.2.0.4.0
~ Madrid.

Problem installing Photosmart C6180 All-In-One software

I've "googled" and found several similar installation issues but none quite match mine. When I attempt to install the All-In-One software, I receive a dialog box error "The system cannot find the file specified." The file that it is attempting to find is found in the Dialog window heading:
c:\users\Myusername\AppData\Local\Temp\7zS52C3\,sourcepath.setup\blocksys...
Using %temp% I am able to verify that the 7zS52C3 folder structure exists. However the ",sourcepath.setup" folder shown above is incorrect. it should be just "setup".
I've ran this install several times under different accounts, including creating a new admin account.
I've cleared all temp files, removed tsr files using msconfig as described and cannot seem to solve this issue. I even renamed the setup folder to ",sourcepath.setup" to see if this would solve the install but it failed on another file.
I am running Windows Professional x64, My HP Photosmart c6180 is connected to the network and I am able to print properly to it from my computer. I need the software primarily for "scanning to computer" functionality.
Any help is appreciated.

Hello @DirkPittP,
Welcome to the HP Support Forums!
I understand that when installing your HP Photosmart C6180 All-in-One Printer on your Windows 7 64 bit computer, you are encountering a 'c:\users\Myusername\AppData\Local\Temp\7zS52C3\,sourcepath.setup\blocksysinstall.exe The system cannot find the file specified' error. I would like to assist you with this issue today.
Now in your original post, I can see that you have already attempted installing the printer on administrator accounts, clearing the temp files, running an msconfig, and renaming the folder to no avail. At this time I would like you run the following steps to see if we can get this working for you.
Step 1: Uninstall Drivers:
First, I would like you to clean up your system of any software or drivers for your HP Photosmart that may have made their way onto your system during the failed installs. Rather than running the 'normal' uninstall process, I would like you to click here to download the Microsoft Uninstaller Tool.
Once the website opens, please select the Run now button on the right hand side. Please follow through any recommended fix steps provided. When prompted, choose that you need assistance with 'uninstalling'. You will be brought to a list of populated programs from your computer. Scroll through this list until you see your HP Photosmart. Select your HP Photosmart and allow it to uninstall.
This Microsoft Tool will also check your computer for any registry corruptions. Should any system corruptions be found, this Microsoft Tool will fix those corruptions for you.
Once the uninstall has completed, please close the Microsoft Tool and proceed to the next step.
Step 2: Clear the Temp Files:
Click on your Start menu
In the 'search programs and files' box type %temp% and hit enter
In the Temp folder select Ctrl + A at the same time on your keyboard to highlight everything
Select the 'delete' button on your keyboard. If you get a pop up to skip an item, just skip it.
Once the Temp folder is emptied, close the window
Right click on your Recycling Bin and select Empty Recycling Bin
Step 3: Download Drivers:
Please click here to download the latest drivers for your printer.
Once the website opens select the Download button on the top left
Allow the download to Run
Once the download has completed the installer will automatically extract
After the extraction if you get the error again for 'blocksysuserinstall.exe' take note of the temp folder 7z . . . number sequence it refers to this time around.
Step 4: Rename Temp 7z Installer package:
Click on your Start menu
In the 'search programs and files' box type %temp% and hit enter
In the Temp folder locate the 7z . . . folder that shows in there
Right click on the 7z folder and left click on 'rename'
Rename the folder to the 7z. . . to the name that the 'blocksysuserinstall.exe' points to
NOTE: Ensure that you are logged into the same User Account that the error points to: "c:\users\Myusername\AppData . . . " when you make the change to the 7z folder. There shouldn't be any 'sourcepath.setup' folders at all.
Step 5: Install Printer:
Once the 7z folder is renamed to the name the error wants than click on the 7z folder to open it
Scroll down to the bottom of the installer files
Double click on the setup.exe file at the bottom. It may show an HP logo to the left of it
An installer window should pop open
Follow through the with the onscreen instructions to reinstall your printer
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Can I update free to Windows 10 from my Aspire ZC-102 All in One desktop from Windows 8.1?

Can I update free to Windows 10 from my Aspire ZC-102 All in One desktop from Windows 8.1?I bought my ACER with Windows 8 on it a year ago thru HSN. Then I upgraded to 8.1 using the Store thing on the computer. I've not been a fan of 8 or 8.1. I'm told that Windows 10 comes out on Friday and that upgrades are free somehow. Maybe that's thru doing the beta testing that I've read about. I don't know. But I'm not in very good shape financially and my computer's operating system is going nuts on me so an upgrade would probably fix things pretty well.
I'd tried to do a Repair Install of 8.1 but was somehow told that since I'd upgraded from 8, a Repair Install couldn't be done thru the Control Panel. I'm clueless and I'm hurting. Can I have some help please?

Thanks. I see that white icon down by the clock that hovered says GET WINDOWS 10. So even though I downloaded Windows 10 yesterday and burned it into being a bootable DVD, I went ahead and just Reserved My Upgrade since the DVD hasn't been cooperating.When I stuck it in and hit any key as the ACER started, it brought me to a screen that I couldn't figure out what to do on. I was clueless and I didn't want to cause myself any grief by just trying anything. I did just backup my28+ GB of Photos, Docs, Desktop, Downloads & Music.
But I don't want to accidentally do a clean install, which I've done before on my XP Tablet pc and that sure isn't any fun for a novice like me.
I only use Office 2013 and an old Paint Shop Pro 6.0 which is really old and isn't their newer v6 so it has to run in Compatibility Mode in 8.1. I'm not an APP guy either. I do use OmniPass software for passwords so I can Save and Restore them if needed, so I had to buy a 64 bit version of that to run on this ACER.
So I guess my next step is to just wait for a Notification from Microsoft that I can now switch to 10 which I think it said will just download so my DVD won't even be needed for anything but as a repair tool.That icon you told me about brought up a screen and on it it said that it found my PC to be compatible with Windows 10. So does that mean that drivers and everything ACER will work as they should or will I need to get anything off the ACER site to make my PC work with Windows 10?

Looking for basic driver for psc all in one 2175 for XP 32 bit. Thank you

looking for basic driver for psc all in one 2175 for XP 32 bit. Thank you Dont need all the photo suite stuff,just basic scan and print.
Thanks

Hi @RUkiddingme
You can download the full feature software and driver, and only install the basic driver. In the installation you should see the option for custom software. Here is the link to download the software; rw2_021_w02_enu.exe
Please let me know if this resolves the issue.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Anti-Virus Software for Windows Vista Beta 2 Preview-

As many of you with MacBooks and MacBook Pros are already installing Windows Vista Beta 2, you may have forgotten about Anti-Virus/Internet Security software. Microsoft is offering Free Anti-Virus and Internet Security software from it's partners that work with Windows Vista. Here is the link: http://www.microsoft.com/athome/security/viruses/wsc/en-us/windowsvistabeta2.msp x
The Trend Micro looks a bit more promising, as it is their Internet Security Suite, and not just the Ant-Virus, as is from eTrust.
I will be installing this onto one of my Windows Machines soon, and will post back on how they work. Hope this helps anyone installing the Windows Vista Beta Preview 2.
-MRCUR
Message was edited by: MRCUR

Hi SkipHaughay,
As far as I know Parallels does not support Windows Vista at this time. Vista must be installed over Windows XP on Boot Camp. IF you do install through Boot Camp, I hear that everything works except for sound and wireless I believe. Hope this helps.
-MRCUR

Hp 3052 all-in-one software for windows 8 32-bit and 64-bit

Similar Messages

Maybe you are looking for