HP 3200 All in One Printer and HP Pavillion Media Center TV PC not working

I have down-loaded the proper driver and successfully installed the proper CD (floppy) for the printer and I still can not print either from e-mail or from "LivePix 2.0" software. I think I have worn out my welcome with HP on-line chat support. Would someone please help me make this printer work again?

What happens when you tried to print?
What is your operating system?
How is the printer connected to your computer?
Have you tried printing from notepad or from MSWORD?
Please click on KUDOS if you find my solution helpful.

Similar Messages

  • I have a HP Photosmart C7280 All-in-One Printer and want to print from my ipad

    I have a HP Photosmart C7280 All-in-One Printer and want to print from my ipad's and my iphones at home...  My printer is set up to print wirlessly on my Network.  I need to know is there a firm wear update i can get or a good app to install so i can print?? 

    hi there, 
    This article should have everything you need to get started . Check it out and let us know if it helps.
    Best of Luck! 
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • I have a C4240 All-In-One printer and i am getting an error message Carriage Jam. i hardly use the

    I have a C4240 All-in-One printer and am getting an error message on the display panel "carriage Jam".  I have not given this printer any kind of abuse.  I do leave it turned on but hardly ever print to it.  I have replace the cartridges probably twice since i have owned it.  Can you help me out  as to what I should do with the printer

    Can't really help with your Internet issues, but I can put you on the path to leaning more about Macs.
    If you're a former Windows user, there many resources on Apple's web site to get yourself familiar with how Macs and OS X work.
    Here ard a few areas to spend time with
    http://www.apple.com/support/macbasics/
    http://www.apple.com/support/imac/intel/
    http://support.apple.com/videos/
    http://www.apple.com/support/lion/
    http://www.apple.com/support/osx/
    For the video tutorials, in the video search box, just type in OS X. You'll get a list of OS X video tutorials to watch  as you learn to use your iMac.
    Start with the Anatomy of a Mac video first, Then the Finder Basics video second. After you have watched and put to use these two videos, you can watch any other OS X video you want in any order.
    Here is a free eBook download of David Pogue's OS X Snow Leopard The Missing Manual here. While OS X 10.7 LIon and OS X 10.8 Mountain Lion work a bit differently than OS X 10.6 Snow Leopard, there are many things that still apply.
    http://it-ebooks.info/book/337/
    Good Luck!

  • I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro.  I have downloaded all the drivers and it has passed all the tests.  Every time I try to fax it shows the job paused.

    I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro.  I have downloaded all the drivers and it has passed all the tests.  Every time I try to fax it shows the job paused.  I can manually send and receive faxes but I can not do it through the computer. 

    Try deleting the printer, deleting the job queue and reinstalling the printer again.

  • Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box.

    Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga

    If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.

  • HP 3210 All-in-One Printer and Vista

    Having trouble with HP 3210 All-in-One Printer/Scanner.  Purchased printer late 2006.  Upgraded to Vista in February 2008.  All functions of the Printer/Scanner have been working just fine with Vista until this month.  Error message says 'Unable to Scan or Copy'.  Scanned from computer on 12/01/2008 and a week later the error message appeared.  Print function from the computer works fine.  Buttons on front of the printer for both scan and copy will not work and scanning from the computer will not work.  Have tried suggestions from different websites to work-around using a program like Microsoft's Paint but still nothing.  Any suggestions will be welcomed.

    Resizing and cropping are not the same process.
    Image>resize>image size brings up a dialog where you can resize, and if the image is resampled, distortion may ensue.
    The crop tool is said, by some, to resample as well, although in many instances minor distortion is not noticed by the uninitiated..
    The preferred way (for me) to crop is Image>crop.
    If you have a 4x6" picture of a tree, landscape mode, and wish to display the tree in portrait mode, the sure way to avoid the issue is to select the tree with one of the selection tools, then copy/paste it on a canvas which is sized 4x6" portrait mode.
    Interesting reading: http://kb2.adobe.com/cps/331/331327.html
    I am sure that others will be along, as this topic is not all black and white.

  • Deskjet HP F4172 All-in-one printer and window 10 compatibility

    Dear Madam/Sir,
    Respectfully I have HP Deskjet F4172 All-in-One Printer, I would like to ask you this question whether my mentioned HP printer will be compatible with window 10 by "29 July, 2015" when window 10 wil be to upgrade, please? and how I am able to get software and drivers, please?

    Respectfully, as I before told you, I have HP Deskjet F4172 All-in-One Printer; I downloaded the window 10 upgrade in my PC and when I go to the HP web Site , in the following link, there is not any sotware and drivers for my mentioned above HP printer, please what must I do? there is only some utilitirs that are useless, isn't the above printer compatible with the window 10?I would like to thank you for the attention.http://support.hp.com/us-en/drivers/selfservice/HP-Deskjet-F4100-All-in-One-Printer-series/3177560/model/3341350#Z7_3054ICK0KGTE30AQO5O3KA30R1

  • I have a hp photosmart c4795 all in one printer and i need the driver and software for vista os.

    install is for a gateway laptop NV5214U. I did asearch on hp website but it responded the it could not find any drivers for the hp photosmart C4795 series all-in one printer.HELP

    Ok from here: http://support.hp.com/us-en/product/HP-Photosmart-​C4700-All-in-One-Printer-series/3794613/model/3940​...
    First, select your operating system Microsoft Windows Vista (64-bit).
    Click Submit.
    Click the blue Download button.
    Click Next, then follow the prompts for the HP Download and Install Assistant.
    Let me know if you need any more help or if this solves your problem!
    Thanks,
    -hjs_19 *I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos Thumbs Up" on the bottom right of this post to say "Thanks" for helping!

  • HT2693 Kodak All-in-One printer and Airprint?

    Can a Kodak All-in-One printer run with Airprint?  Is there a device that adds Airprint and Airplay to devices that do not have that feature?

    Kodak does not appear in the list of Compatible Air Print Manufactuers in the following link:
    AirPrint Basics.
    http://support.apple.com/kb/ht4356
    With that said, there are several alternatives both software and hardware based to give non Airprint compatible printers the ability to be used by iPads, iPhones and other iDevices.
    If you are running a Mac Pc you can look into Printopia
    http://www.ecamm.com/mac/printopia/
    If you are more interested in a hardware solution look into Air Print servers such as:
    http://www.lantronix.com/it-management/xprintserver/xprintserver.html

  • I have a hp7250 all in one printer and it just stopped printing hp printer says radio not working

    i have a hp 7250 all in one printer it just stopped printing my compute says its offline but when i go to pinter and try set up it says cannoct connect then review says raido not working

    If that reset did not resolve the issue, and the printout indicates that the wireless radio is not working then there are a few options that we can go through. 
    First, make sure that through the Setup Menu that the wireless has been enabled and turned on. If these options are not available, you may have to try a differnet reset that I will PM to you. 
    Also, if the wireless radio is not functional then you might consider connecting the printer directly to the router using an Ethernet cord and reinstalling the printer on your computer using that method of communication. 
    Let me know! Happy holiday! 

  • L7555 all in one printer says rear access panel is open, its not

    Hp officejet pro L7555 all in one printer.  I had a paper jam which i cleared however the Door open rear access panel is open keeps coming up.  I cleaned the contacts with a lint free towel and an eraser.  I have powered down the printer nothing works.  Help

    Hello gdvasso:
           What a mess you are having. This is horrible. I have Iyogi support on my computers witch takes care of ever thing but you have to pay them for subcriptions. I know they spent about fours setting up my HP C410a photosmart all in one with fax. They were zipping around every where from defauts settings, comand promt and services to the routers reset web page. Most of the time spent was just waiting for the software to install. I just ran into a snag what is your computers Windows 7 ? bits. I need to know this so you are downloading the right software pack. Then I will post directions on how to install them one at a time switch from one printer to another using devices and printers. In the mean time please go to programs and features and uninstall any printers software that maybe listed. So we can have a fresh start. I need your computers bit information. Thank you frrw. Soon as you post the requested information needed.I will post on how to get them installed. Thank you frrw.

  • HP psc 1210 all-in-one printer and Mac OS 10.9 (Mavericks)

    I just installed the new OS X (Mavericks) on my mac yesterday, and now my printer, an old but reliable HP psc 1210 all-in-one, will not install.  I was previously running OS 10.6 (Snow Leopord) and had no problems with the printer.  Is there anything I can do to install my printer on the new OS?  My computer doesn't even recognize that there is a printer connected via USB when I try to install it... is there anything I can do?

    Hello,
    Here is a link to a support document on hp.com on how to install on OS X Mavericks.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&tmp_track_link=ot_faqs/top_issues/en_u...
    Let me know if this was usefull by clicking on the Kudos button.
    I work for HP.
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS STAR on the left to say “Thanks” for helping!

  • I have a canon pixma mx360 all in one printer and it won't print

    my printer won't print I just replaced the ink. I tried to trouble shoot the printer, and it said that I had a printer error in the que.
    I cleared the que and it still won't print. can you please help me figure this out? my printer is a pixma canon mx360 all in one
    ink jet.

    Hi wendasa,
    If you have any antivirus or firewall programs on your computer, please temporarily disable them and then try to scan again.  Sometimes these programs can block the scanning process of the printer.  If you are still unable to scan, we can try scanning using the Microsoft Paint program to see if the scanner function of the printer is working.  To attempt to scan using Microsoft Paint, please follow these steps:
    1.  Launch Windows Paint by pressing the Windows Key+ R, then typing mspaint, then clicking OK.
    2.  Once inside of Paint, in the upper left corner you will see a blue square; please click on that and select FROM SCANNER OR CAMERA.  A window will appear asking you what device you want to use.  Please select the PIXMA MX360, then press the OK button.
    3.  In the next window, you should have the option of selecting a document type; please select one, then press the SCAN button in the window.
    Are you able to scan using Microsoft Paint?
    If this is a time-sensitive matter, additional support options are available at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • HP C4440 ALL -IN- ONE PRINTING AND INK ISSUES

    I have an HP C4440 ALL-IN-ONE that seems to be having some printing and ink issues.
    Ink keeps saying it is in backup mode
    and its also saying it is not detected or intalled
    this is not a new cartridge and has been used before without any problems.
    i tried using all of the solutions hp gives you with no help.
    all ink levels are detected and i am also using color ink cartridge.
    thanks for any help.

    Hi! I have same problem too. After printer (HP B110b) turn on and then off, all my Wi-Fi devices lose network. I should reboot my router every time after use printer =(((This problem only with Wi-Fi. All ethernet-connected devices woks OK.
    My network: D-Link DIR-320 with firmware 1.21
    Wi-Fi: hidden network with WPA/WPA2 and PSK mode.
    Wi-Fi devices: netbook with WinXP SP3, netbook with Win7 Home Premium x32, Sony-PRS-T2 reader and Galaxy S3 phone (last 2 based on android).

  • I just purchased the envy 7640 all in one printer and need to enlarge the print

    I just purchased the all in one envy 7640 printer and want to print from my lap top but the printing that comes out is very very small and i need to enlarge it, I am not a real computer whiz so I just need step by step instructions on how to enlarge the copy being printed.  Thank You in advance for your help.

    Hey , Welcome to the HP forums! I hope you enjoy your stay here. I see that you are trying to enlarge the size of a document you are trying to print. While the specific directions will change depending on your operating system, the program you are using, and the type of document you want to print, I can certainly make sure you get pointed in the right direction. Assuming you are trying to print a text document (and please let me know if you are not) then first you will want to highlight the text you are trying to change the text of. Once highlighted you are looking for an option found at the top of most windows. The option usually has a font name to its left such as Times New Roman. When you select a larger font size it will change the highlighted text so that it matches the size you selected. I've included an image of the option below.  If you are trying to print something that is not a text document then please let me know what program you are trying to print from as well as what operating system you are using. If you are not sure what your operating system is you can click here to find it. If you have any other questions please let me know. Also, if this resolves your issues then please let other forum users know by clicking on Accept as Solution below my post. I hope this helps and I hope you have a great evening!  

Maybe you are looking for