Hp 3322 deskjet in Windows 8

Seems no official drivers for Windows 8. Now at a remote location and need at least minimal b/w printing. Any work arounds?
This question was solved.
View Solution.

Hi,
I afraid the pritner is not supported on Windows 8:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03457812&tmp_task=prodinfoCategory&cc=us&dlc=en...
You will not be able to use any other alternative driver with the printer as there are no drivers to allow the PC to communicate with the printer through a USB connection..
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Sharing a Deskjet D4160 (Windows Vista problem?)

I have an issue sharing a Deskjet D4160 printer.
It's connected to a Windows Vista Ultimate PC (USB), and prints perfectly from it.
HOWEVER, I am unable to share it. It appears when I browse my network, but ALL OTHER machines (Vista AND XP)
get an 'unable to connect' message.
Have verified that all users have security permission for it, no firewall enabled on the hosting PC, as well as no firewalls on
any of the other PCs (Have a firewall device between my network and the outside world).
Any one have a suggestion as to where to look?
Thanks in advance.

Your library and media should be preseved when reinstalling iTunes. See the Further Information area of Troubleshooting issues with iTunes for Windows updates for details and a backup tip.
Apple won't reach out and fix your computer now that something has gone wrong. How would they know? A new release of iTunes won't fix the proplem either as the installer won't do the clean out of the program installation folders that is needed prior to a clean reinstall.
tt2

Windows 7 Driver for HP Deskjet 1280 Windows 7 32 bit

i have a hp deskjet 1280 and have recently upgraded to windows 7 but can't find driver for it. I am on Windows 7 Home Premium 32 bit. Help would be much appreciated
This question was solved.
View Solution.

Hi,
Hope this helps:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=439174&p...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Print panel on hp deskjet in windows 7 64-bit

Hi!
My customers had problems with print.panel to printer method in windows 7 64-bit so I made a simple standalone application which prints a VI panel to default printer (zipped project is attached). I'm using Developer Suite with Labview 12.0f3 (32 bit) on Windows XP. The application has been deployed to computers running windows 7 (64 bit) and windows XP (32 bit) and tested with different printers: local and network. There is a list of printers where the application does not print the panel on windows 7 (64 bit): HP DeskJet D4360, HP DeskJet 5550, HP DeskJet 5652, HP Photosmart C3180 and PDF Complete (an application which converts document to PDF). The application does not report any error, everything seems normal. The document is sent to the printer, usually printer heads start to move for a moment, in one case the paper is taken from the drawer and that's all. There's no need to say that all this printers work normally with Winword, Notepad, Excel, ...
My application prints a VI panel in Windows 7 (64 bit) without any problems if I use: Canon IR2200, Toshiba e-STUDIO 2500c, Samsung ML-2240, HP LaserJet 5L, HP LaserJet P2050, PDFcreator, ....
ALL printers, including HP DeskJet models, work normally in Windows XP (32 bit).
According to the post here the printer margins in my application are set to a value of 3 cm because it might solve the problem but it does not help.
Any other suggestion?
Ljubo.
Attachments:
_proj_PRN_test.zip ‏14 KB

Dear Ljubo!
I'm glad that it has worked for you, I hope your clients will have the same success. As I've found, incompatible printers on Windows 7 64bit is a known issue, and will hopefully be fixed in a later version of LabVIEW. I'll be sure to include your input (which printers worked and which did not) on the case.
Also, it seems to me that both the Invoke Node and the Library Call use the same function to accomplish printing; however, the Node sets the "show print dialog" input automatically to false, hence the lack of printing options (this makes sense from a programming perspective, since if we want to print programmatically, additional user input at every print job is most likely unwanted). Please get back to me when your customer has results, if something is still not functioning, we might explore some other workarounds.
Kind regards:
Andrew Valko
National Instruments
Andrew Valko
National Instruments Hungary

DeskJet 970CXi - Windows 7 - Network Printer - Drivers solution

Hi all, i was looking for a solution to install my Deskjet 970CXi as a network printer, using Windows 7.
I didn't find anything directly concerned the network installation but only for local printer through USB port.
Many people are bored and tired about this issue.
So i decided to try by myself and using an idea taken from another thread ..... now it works really fine and it is recognized by the system as Deskjet 970CXi !!!
Here's the solution I've found
First part written by panther3001
1) in Windows 7, click the start menu
2) in the search field type "run"
3) click on "Run"
4) type "hdwwiz" and go to "OK" - note, you can type "hdwwiz" directly on search box, or add the command "run" in the start menu ( http://windows.microsoft.com/en-US/windows7/What-happened-to-the-Run-command  )
5) click "next," then click "install the hardware that I manually select from a list." click "next."
6) click "printers" and "next"
7) select "use an existing port" and go to "USB001." click "next" (you don't have USB cause the printer is on the network) .. choose LPT1 instead
8) click "windows update". This causes Windows Update to look for ALL printers that exist for Windows 7, and lo and behold, The driver for the 970cxi now shows up!!!
9) select this driver and continue on.
second part discovered by myself
10) install the printer as local printer and then try to print the test page, you'll get error, don't worry and delete the print process.
11) close the window displaying the printers and other devices
11) click the start menu
12) choose Devices & Printers
13) click on add printer
14) choose Network, wireless or Bluetooth
15) now Windows shows you 2 printers (one on the net and the other on your PC)
16) choose the printer connected through the printer server
17) from the drop list choose HP Deskjet 970CXi
18) DONE !!!
Following this procedure i performed the network installation of 3 Deskjet 970CXi, one is mine, the second one is my brother's printer (at his home) and the last one is in my office.
Please let me know if this works for  you also.
Nicola

Hi,
No, it should not come offline at all. Please use the following tips/instructions to fix:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02221706&cc=us&lc=en&dlc=en
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Driver for Deskjet 1220c (Windows 7 x64 and Windows Server 2008 R2)

Hi,
I've got a Deskjet 1220c and have recently upgraded two machines; one to Windows 7 Ultimate x64 and the other to Windows Server 2008 R2. Any idea where I can get printer drivers?
I'd like to try the Vista x64 drivers, though these were included on the Vista CD from MS, and not available as a separate download from HP (http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00868762).
I'd be grateful for any suggestions.
Thanks,
Mt

Hi
I had this trobule too. Below is the instructions to install driver. Disconnect your printer. In printers select add printer. Then click windows update (need internet) allow them to update and then select 1220c printer to install leaving as standard old port. Once installed go into printer properites and update to USB port.
Bingo it works!
Refer to the below link for full instructions.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796821&tmp_track_link=ot_recdoc/c01874792/en_...
Good luck
RB

LAN printer HP 1280 deskjet for Windows 7

After i was reed a post Windows 7 64bit driver for HP 1280 deskjet were problem
solved with vista drivers, I think it works for local printer, but i use lan printer, like:
\\server_name\HPDeskjet3050
and i need another one
\\server_name\HPDeskjet1280
so, that's a problem
When i connect the printer with vista driver for win 64bit his doesn`t work,
windows 7 report me - "drivers not found, try another..."
what can i do? :-\

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial deskjet board here:
http://h30499.www3.hp.com/t5/Printers-Deskjet/bd-p/bsc-415
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP solution centre software is no longer available (Deskjet 1050A, Windows 7)

I installed the drivers and software when I received the printer (HP Deskjet 1050A All In One) over a year ago it has always worked OK. Used it for the last time yesterday. Now, when I click on the same desktop icon or run it from my programs menu I get a basic Windows screen ( I am in Windows 7) where the only options I get are 'See Whats Printing', 'Printer Preferences' and 'Customise Your Printer'. This has replaced the previous software where I could access options such as 'Printer Actions', 'Maintenance tasks', 'Align Ink Cartridges', 'Check Ink Levels' and 'Align Print Heads'. I don't know what has caused this to change, but I now have no means of running these options. I uninstalled the software then reinstalled from the original disk, but no change.
Anyone think they might know what is going on?
Any help much appreciated.

Hi there Rawmarsh_Blade, welcome to the forums
I saw your post about all of the printer software options not being available to you any longer. I would suggest running the HP Printer Install Wizard for Windows to install the full feature driver again. It seems like you might have the basic driver installed.
I hope that works for you!
Have a great weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

DeskJet 870Cse & Windows 7 64-bit driver

The online info for driver downloads for the DeskJet 870Cse says that Win7 already supports the necessary driver and instructs me to connect the printer via USB cable to the computer. However, my printer has only a parallel port (for PC) and a MAC port ... no USB port. In any case, the printer is on a LAN-based print server and I just want to install it via a standard TCP/IP port (as I do on all our XP machines currently).
Is there a solution?
Thanks for any help or tips.

dvejr wrote:
Dumb question - which is "the appropriate port"? USB or LPT1?
DVEJr
It depends... If you have an actual parallel port on your computer it would likely be LPT1:. Most Windows 7 computers do not have a parallel port. If you are using a USB- Parallel converter cable then it is more difficult. In this case the port may be USB001: (or perhaps USB002: or some other USB00n or the USB-parallel cable may provide an emulated LPT port such as LPT3:.
The USB-parallel cables can be problematic, to work they need driver support in Windows 7. The thread here (toward the end) has some examples folks have posted about cables they have had success with. OK, to make the cables that work easier to find I have tagged them with W7_USB-Parallel. There are undoubtedly others that work, I have also heard of good results with Belkin and Sweex cables. Be sure to check the cable to make sure it is rated to work with Windows 7.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Deskjet F4580 - Windows 7

Hi,
I've recently updated the OS on my Dell Precision 490, from Windows XP to Windows 7, 64-bit.
I'm having all manner of trouble trying to get my Deskjet F4580 up and running again. Running 'troubleshoot' (under 'printers and faxes') tells me that the driver is not installed. I've gone through this process several times now. I download the driver installer (by default it finds 'DJ_AIO_06_F4500_USW_Basic_Win_enu_140_175.exe) and run it. It extracts sucessfully, but then just gets stuck on the little animated spinning disc logo.
I've tried with the 'Full' driver installer, but this doesn't even get to the animated logo stage!
Any help would be hugely appreciated.
Thanks,
Ben

Welcome to the forums Ben
I saw your post about the installation issues you are having with your Deskjet F4580 on your Windows 7 system. I want to share some of my suggestions with you to hopefully help!
First of all, try installing the printer by running the HP Printer Install Wizard for Windows.
If that also fails, follow this guide: Windows 7: The Progress Bar on the Software Installation Stops or Stalls
That should resolve the issue, however, if it doesn't, let me know how you are connecting your printer to your PC, USB, Wireless or Ethernet, and include and errors you may see.
Thank you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Deskjet 960C windows 7 Driver

I have a Deskjet 960C that worked on XP. Now I have another Desktop with Windows 7 connected on a network to the XP desktop. The deskjet installed it will not work and I am looking desperately for a Windows 7 driver which is supposed to be in Win 7 but it is not.

Do a Windows Update from Start > All Programs over and over until there are no more updates.
Now, with Internet access available, plug the printer into your PC.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Deskjet 5850 - Windows 7 Dell laptop can't ping but all other networked machines can

So we have a 4-year-old Deskjet 5850 connected wirelessly to the home network. We've had a problem that it periodically disconnects from the wifi and won't reconnect until it's rebooted; however I've lived with this up to now (after much playing with settings, I might add).
Now my wife's new Dell laptop (insurance, old laptop, cup of tea, long story) has Windows 7, which doesn't have the HP full-feature software. I figured the best thing to do was to try to add the printer manually, forcing the driver to 5600 series as per the HP support website; however I got absolutely nowhere.
A little digging showed me that the laptop simply can't see the printer - it won't even ping it. Every other machine on the network (there are 3 others if you count the networked tivo!) can ping the printer, the laptop can ping all the other machines, but it won't ping the printer.
I tried disabling windows firewall, it made no difference. I tried leaving the home group as recommended in various forums but again, no difference (can't see it making a difference anyway, since none of the other machines is in the group and it should still ping the printer anyway, no?).
There can't be any wifi b/g separation set up in the router because my laptop and TiVo are both running G and can ping the printer no problem.
I've given up scratching my head on this one and have reached the head/wall stage.
The printer is set up as static IP 10.0.0.10, DHCP range starts at 10.0.0.100 so no chance of any conflict. The laptop has picked up DHCP IP correctly (10.0.0.169, fwiw) with the right netmask.
I should maybe mention that I've a degree in computer science and 15 years IT industry experience; I know what I'm doing with this stuff, so it's nothing blindingly obvious... but this one has me completely stumped.
Oh, if anyone has a fix for the printer disappearing off the net, that would be cool too
Help!

For what it's worth, it turned out to be (I think) a combination of router/printer settings.
The printer's idle timeout had ended up set to 0, unsure how (possibly when I first set it up I misunderstood the meaning and thought "well I don't ever want it to timeout"); now I'd already changed this back to the default last week when I was first trying to connect the Windows 7 machine but it made no difference; however I hadn't rebooted the router since.
The clue for me was that in the router setup (a Be-branded Thomson 565v7) the printer came up as "inactive" in the list of devices. Rebooting the router after changing the idle timeout seems to have done the trick - the printer both appears on the net for the Windows 7 machine and stays connected to the wifi.
I still don't understand how the router can have got itself into that state where it will pass some traffic and not others. Perhaps the machines that could ping the printer were the ones that were connected to the net when the router first saw the printer and therefore had seen the arp update.
Maybe if I'd tried harder to force the entry in the arp table on the win7 machine I might be able to answer that; it came up and moaned that I wasn't allowed to do it, even though I was running in a "run as administrator" cmd window, and I gave up (since I figured the arp was getting out there if the other machines could see it).
Anyway, the answer was (at least in my case), check the idle timeout and reboot your router
Thanks again for your post

Deskjet 940c Windows 7 Drivers

I'm trying to find the Windows 7 drivers for a Deskjet 940c printer.
I have followed the instructions at the HP site but the Deskjet 940c is not on the list.
I work for General Motors and Window 7 was installed by HP so I don't have access to any install CDs.
Any answers?

You mention a USB cable and a multi-prong cable. Are you using a USB-Parallel converter? these can be problematic, it would be better to just use a standard USB cable as shown in the top picture in the document here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Driver install problems for HP deskjet 3052A windows XP

I am trying download driver for hp printer . I download the HP solutions program and try and run it and nothing happens ? I do not have the original install disk? Is it due to settings on my pc? I have a Dell dimension 5100 desktop pc. I do have a HP deskjet 6988 installed on the pc currently.

Hi @stickscurran
If by HP solutions program, you mean Printer Install Wizard, it is only for Windows 7, 8 and 8.1. you can however, download and install your software using the following link; HP Deskjet Full Feature Software and Drivers.
If this does not work, please provide me with any applicable details, such as error messages and/or screenshots. How to take and post a screenshot on HP Support Forum.
Please let m know if you are able to complete the install successfully! Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Fail to install driver HP1050 deskjet for windows 8 when connecting printer with computer

I have this great HP desket 1050 printer for less than a year. My computer broke down so I bought a new one, but now with windows 8.1. So my printer was not working anymore, I fail to install my new printer. I can install the driver for HP1050 deskjet, but then there is a moment that you have to connect the PC and printer with an USB cable. This is the moment that the installation fails, nothing happens when I plug my printer into my PC. So I never finish the installation process complelty. The same thing happens when I choose add printer later and then add my printer. My printer is on and the cable is well plugged in. Anybody any suggestions as I would like to use this printer again. Thanks in advance

Hi @Annemarie85
I understand you are unable to complete the installation of your Deskjet 1050.
Please use the following document to troubleshoot the issue, and let me know the outcome of your efforts; Windows: 'Device Setup Failed to Complete' or 'Unknown Device' Message Displays on the Computer Duri....
I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Hp 3322 deskjet in Windows 8

Similar Messages

Maybe you are looking for