HP 3510 All In One only printing blank pages after cartridge replacement

Recently replaced my blank ink cartridge after supply level showed low, and printed output looked faded.
Using genuine HP product - check
Cartridge supply level good - check
Powered on and off twice - check
Installed, removed, re-installed cartidges - check
Good paper - check
Alignment prints blank page - does not print partial or low quality, just produces a blank page.
Printing from my computer, a word document, also produces a blank page - not parital - blank.
Was printing before the HP cartridge change.
Did I buy a bad HP cartridge?
Any help would be appreciated.

Forgot to mention that I am not getting an error message either, except when I go through the motions of scanning the (blank) alignment page. That error is related to the fact that it is blank though.
Thanks for any assistance.

Similar Messages

HP All-in-One 2100 Prints Blank Pages

Anyone had this issue where an HP ALL-IN-ONE only prints blank pages, or only parts of the page? It worked great for years, now after a few clean installs, it's junk. Sometimes it works somtimes not. Now seemingly always not.
Any suggestions?
Thanks!

I have had this problem FOREVER. I even paid the $59.95 to HP for "Support time" to fix the problem, which they never could do.
For the last year or so I've been using GIMP print drivers, which work, but I have even better news.
Every few months I check the HP site to see if they have released new drivers. This weekend when I checked there was a new driver, version 7.9, as a Universal binary. So I gave it a shot.
I have an OfficeJet 6110xi, but I bet they updated it for all the All-in-ones. Here's the link to the drivers I am using:
http://h10025.www1.hp.com/ewfrf/wc/softwareList?lc=en&cc=us&dlc=en&product=79480 &lang=en&os=219
To my amazement and surprise everything is working again!
Another great surpise is that scanning multi-page documents under "PDF to Adobe Reader" now actually results in one file with N pages rather than N 1-page files.
It was a long wait, but thank goodness it's finally over!
Best of luck,
Alan

Safari only prints blank pages

Anyone help with Safari printing issue? It will only print blank pages, on my PC, although all other apps print just fine. I have the latest Safari version.

I found one possible work around. I too tried to print a multipage TV schedule from Safari. Printed first page and then multiple blank pages. Tried saving the schedule to PDF and Preview did the same thing. . .printed first page and then blank pages.
Finally opened the PDF file with Adobe Reader and it all printed out just fine. Hope this helps until Safari is fixed.
BTW I just upgraded to tiger and then 10.4.3. Before upgrading I deleted all the HP 6110 software and rebooted. Then I upgraded to Tiger and ran the Combo 10.4.3 updater. Then I configured my 6110 using the Tiger installed drivers and it printed fine. Then I downloaded and installed the current HP software and installed that. Everything works perfectly, scanning docs and pictures, coping and regular printing.
Doug

My brand new HP x451dw only prints blank pages

My brand new HP x451dw only prints blank pages. I have never seen a drop of ink on a page since I have had and set up this printer, even during the set-up process.
All indications suggest that I have configured the printer correctly. I have communication from a variety of computers, ipads, etc. and all will get the correct number of pages to come out of the printer, all pages are blank. Likewise with the printer test page.
There has never been a drop of ink on any page since I took this out of the box.
I do not get any error messages. The printer thinks the ink cartridges are full - they are genuine, and they are full.
Any ideas anyone?

If this just happens from these two programs, it's most likely a driver conflict. If typically using an alternate driver will alow you to get around this. To try this, add the printer's que to the Mac. Click the dropdown next to Use and choose a driver that's not for your printer. Typically the best one to try is another Photosmart dirver, but Deskjet drivers will work as well. I would make the instructions a bit more clear, but I don't have access to a 10.6 Mac. Let me know if this works or not.
I am a printer tech for HP.

HP printer only prints blank pages from Word or Pages

My HP all in one printer only prints blank pages from Word or Pages documents, prints ok from anything else. Any ideas? Have deleted and readded printer removed HP software reinstalled software from Apple etc. Help please!

If this just happens from these two programs, it's most likely a driver conflict. If typically using an alternate driver will alow you to get around this. To try this, add the printer's que to the Mac. Click the dropdown next to Use and choose a driver that's not for your printer. Typically the best one to try is another Photosmart dirver, but Deskjet drivers will work as well. I would make the instructions a bit more clear, but I don't have access to a 10.6 Mac. Let me know if this works or not.
I am a printer tech for HP.

HP Officejet Pro 8600 Plus only printing blank pages

Hi, My HP Officejet Pro 8600 Plus currently only prints blank pages.I've gone through the following troubleshooting steps-Soft reset-Hard reset-3 levels of print head cleaning-Replacing ink When I try to realign the print head, an error pops up saying that there may be a jam, but I cannot see anything blocking it... I know the printer is out of warranty, but if there are any other troubleshooting steps, please let me know. Product Number: cm750a Kris

Hey there Kris, Welcome to the forums! I read about how your Officejet 8600 Plus is only printing out blank pages, and I'd like to help! I have a few ideas in mind that you could try and I hope they work! You mentioned that you are seeing a "jam" error, so I would like you to try out these guides:A 'Paper Jam' Error Displays on the HP Officejet Pro 8600 e-All-in-One Printer SeriesA 'Carriage Jam' Message Displays for HP Officejet Pro 8600 e-All-in-One Printer Series (N911) Please try making copies afterwards and if the copies work, try printing. Let me know the results!

HP LJ 1320 only prints blank pages

The printer will only print blank pages. Test pages are also blank (including from the Green Button). This is a recurring issue. It was solved in the past by fiddling with the cartridge and mechanical parts inside (we don't know what exactly sovled the problem). Toner is full. I ran the HP Diagnostic Tool and it found no "X"s.
I verified that the following mechanical parts are functional:
switch on left side of cartridge door
plastic tab on top right of door, which connects to laser spring/switch
spring/switch underneath top panel, which seems to enable laser
arm/gears to enable paper spindle
contacts on printer-side of toner/printer connection (this part slides from side to side 1/4 inches, and I tried printing with it in various locations)
There seem to be no error beeps/tones when the printer starts up or when I close the toner door. (However, it was capable as I bypassed one of the switches and it made an error tone at that point).
I think it must be something like a dead laser (however, I think the laser is invisible and we cannot test tosee if it is functional).
Any other ideas/solutions would be appreciated.
I forgot to mention that the low-toner light is not lit, and we've had this issue with both new and old-working toners cartridges.
Message Edited by measterbrook on 11-10-2009 09:57 AM
Message Edited by measterbrook on 11-10-2009 09:58 AM

Has anyone else had this problem? I have a LaserJet 1320 that started doing the exact same thing last week. I'm wondering what I have to do to get it working again. Anyone know something about these units?

When downloading a pdf, the print command show a document in the preview but only prints blank pages

When downloading a pdf and using the print command, it shows the correct document in the preview but only prints blank pages. If I use the save command and try to open with Acrobat 11.0.07, it says it wasn't correctly decoded and can't open it. If I do the same thing on my old Macbook (10.6.8) all works fine from the same website with the same document. Any ideas?
D

This article maybe help to you, change pdf file type to other application like adobe reader, See:
* https://support.mozilla.com/en-US/kb/Managing%20file%20types

Pixma was working just fine until I replaced 3 of the ink cartidges. Now it only prints blank pages

Pixma was working just fine until I replaced 3 of the ink cartidges. Now it only prints blank pages. It does the same thing from my computer as from the printer itself. Also passes the device maintenance tests, including all the colors and the alignment. Does anyone have any ideas?
Thanks

Hi, Patty8888!
So that the Community can help you better, we will need to know exactly which printer model you're using, which operating system is running on your computer, how your printer is connected to your computer. That, and any other details you'd like to give will help the Community better understand your issue!
If this is a time-sensitive matter, our US-based technical support team is ready to help by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

HP inkjet 2800 connected via USB only prints blank pages

I have a new Wndows 7, 64 but PC. My HP inkjet 2800 connected via USB only prints blank pages. What is wrong?

Not all printers are supported by the airport products alas. have a look here for a list of printers which are supported:
http://www.ifelix.co.uk/tech/8013.html

My print setup will not work and Fire fox only prints blank pages. Help?

I tried to change the margins on my printer set up. Since I did this my printer will only print blank pages from Firefox. (If I open a PDF it prints fine) I have tried to go into print set up but it only comes up as a big black page. Any thoughts??

Sorry, just to be clear:
(1) Which did you use to make the change and which do not display correctly:
orange Firefox button > Print > Page Setup<br>
''or''<br>
classic File menu > Page Setup, or
the Properties button in the Print dialog?
(2) If you switch to a different printer, such as a PDF printer driver (many free ones you can install, such as [http://www.primopdf.com/ PrimoPDF] and [http://www.cutepdf.com/products/cutepdf/writer.asp CutePDF Writer]), can you regain access to Firefox's Page Setup dialog?

Deskjet 3050 All-In-One J610 only prints blank pages

Hi,
All of a sudden, my printer stopped printing. The ink levels in the cartridges look fine in the HP utlity, and I did the self-cleaning steps, but when I print something, only a blank page comes out. There is some ink around the edge of the paper, though, but nothing on the actual page.
Any idea how I can fix this?
Thanks.

Hello jennydel,
Welcome to the HP Support Forums!
Cleaning the printheads is a great way to resolve print quality issues on the Deskjet 3050. On the cleaning page, does anything print on it?
In this HP document: Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems you will see the full HP suggested troubleshooting steps. I hope they are able to help get the printer working again.
Thanks for posting.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

J5750 Only printing blank page

I am trying to print a Word document and it is only printing blank sheets. This is a new Vista 64 machine but the printer has worked with my old XP machine in the past. I installed the correct drivers from the HP site and downloaded / installed updates. Ink levels are all fine. I successfully printed a diagnostics page that came out in color but with no black (I'm assuming there was supposed to be). I tried to print a test page but got a pop up that simply said "Out of Memory". I have also confirmed that the tape was removed from the ink nozzels prior to cartrige installation. I think that's everything....

Have you tried making a copy simply from the printer without the aid of the computer?
Have you also tried to print from notepad? Does it have a similar result?
Please click on KUDOS if you find my solution helpful.

Help[: Laserjet 1300: Printing blank pages (new cartridge & drivers installed)

Hi All, printer keeps printing blank pages, just bought a new cartridge and even re-installed the drivers- can anyone perhaps advise as to a way to resolve as I am urgently needing to print?

Forgot to mention that I am not getting an error message either, except when I go through the motions of scanning the (blank) alignment page. That error is related to the fact that it is blank though.
Thanks for any assistance.

Laserjet 4M Plus (C2039A) prints blank pages after cleaning?

I have a Laserjet 4M Plus (C2039A) that was working well. I was getting toner streaks so I disassembled the covers and cleaned dust and toner out. Cleaned plastic and plates with soapy sponge, cleaned rollers with alcohol, brushed and used air to clean dust. I'm good with mechanical projects. After re-assembling, I print blank pages. The menus, display, and computer interface seem fine. Paper feeds correctly. Self Test displays no errors, but I am unable to read printed test results or settings. I went into Service Mode, and ran Self Test there. I'm ready to disassemble it again, but do not know where to look for improper fit. What would prevent any characters from being printed? I'm using Windows XP drivers, and parallel port cable.

Hello kbright,
Welcome to the HP Consumer printer Forums.
The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

HP 3510 All In One only printing blank pages after cartridge replacement

Similar Messages

Maybe you are looking for