HP 3510 all-in-one won't connect to wireless - MAC filter

I'm trying to set up my HP Deskjet 3510 e-all-in-one, but every time it tries to connect to my wireless, it fails and gives me an error saying it may be due to the MAC filtering on my router.. but there is no MAC filtering on my router! I even added it to the approved devices just in case. If I try to just set it up via USB, the software doesn't always respond to the fact that I've plugged my printer into my laptop. I'm on Windows Vista. TRIED the solution of unplugging everything, restarting everything, turning things off and on again, etc., the error never changes but I have seen for myself and had the internet company confirm that there isn't any MAC filtering on my router.

Hi,
Please enter your wireless router configuration and check what security type is configured.
May it set as WEP security?
If so, ensure the authentication type is set as Open or Auto, then try connecting the printer again.. HP printers does not support the Shared Authentication type..
Otherwise please clarify what security type is configured.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Hp all in one won't connect to my wireless

I'm having an issue connecting my Hp all in one to my internet. I changed my internet to Fios within the last few months. At first there was no problem then one day it was running slow so I disconnected it and now it doesn't recognize my internet name. I need to know what I need to do to have it find my internet connection.

Do not use WPS. It should be disabled in the router for security issues. Please explain your full network setup including all make and model numbers and how everything is connected.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

3510 all in one having trouble connecting to new wireless network

Ok - just to update, at least the drivers are downloadable now ... I'll see if that resolves my issue.

Hi guys. I just switched to a new modem through my ISP (Rogers) that has a built in router and a much faster connection. (Previously, this 3510 printer was working just fine over my network with a modem and a router that was separate.) My computer is hooked into the internet via a direct cable and everyone else in the household connects via wireless, which has been set up and works well. For some reason though, my 3510 refuses to play nice with the modem and connect to the network. I've tried plugging it in via usb cable, then going into the settings and clicking on the "convert a usb connected printer to wireless" option. I hit "yes, access the computer or router", then next, it finds my wireless network with no trouble and I type in the required password and "next" - it then takes a while to go through it's "setting up printer on network" .... and then after a while, I get a "MAC address filtering may be enabled on your wireless router" error. There IS no MAC filtering. I have "allow all" set on the router. This shouldn't be an issue. Has anyone else had this problem? Is it just a thing with the newer modem/router combos and these older HP printers? I tried to update the driver, but your website doesn't seem to be letting folks do that at the moment (some error you're fixing, it says?). If you have any suggestions on how I could get past this problem, I'd really appreciate it. It's driving me NUTS. Thanks! All the best, -- Jodi

HP 3511 all in one won't connect to my wireless modem

I just switched providers and now can not get my printer to connect to my modem. I have tried the WPS button but it is not finding the modem I guess. I do know that my modem has two different addresses (its the new one from Grande) the tech support said to try to find one but this printer does not give me that option. PLEASE HELP I HAVE TO PRINT STUFF TONIGHT.

Do not use WPS. It should be disabled in the router for security issues. Please explain your full network setup including all make and model numbers and how everything is connected.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Officejet 6600 All But One Laptop Can Connect To Wireless Network Printer

One windows and 2 macs can connect to the wireless printer over the newtwork just fine but one (Windows 7) will not. HP Print and Scan Doctor can discover the printer from that laptop as "visible" but repeatedly says " need to install full software" which I've done, and after, it runs install wizzard reports, the IP address I've entered is wrong, which it's not. Firewalls are off. I've un and re installed, tried windows add device which can't connect either. I've had this problem before with this laptop but just can't remember how I fixed it. I remember getting to a screen that offered the option of installing over a nework or wireless directly to the printer and over the network fixed it, but I can't remember how I got there. Any ideas as I'm at wits end. Thanks

Welcome to the forums @Davidchicago ,
I read through your post about the installation troubles you are having with one of your Windows 7 computers and your Officejet 6600. I am here to let you know what my suggestion is for you!
There could be a program blocking the installation and causing the problem. I'd recommend a Clean Boot, restarting your PC, disabling your firewall and running through the installation again.
Hopefully that will get you through the install. Let me know the results!
Have a great weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

C3180 Photosmart All-in-one won't print. Gives message 'clear paper jam.' There is no paper jam.

C3180 Photosmart All-in-one won't print. Gives message 'clear paper jam.' There is no paper jam. About a month ago there was a paper jam, but was removed. It worked fine since then until yesterday. I've tried all the HP trouble-shooting suggestions- unplug, take apart, manually move carriage, etc. and nothing has solved the problem. The paper does not advance...all that happens if I try to print is a lot of noise like carriage going back and forth and after a/b 1-2 minutes it will show the "red X" blinking on the printer and a message on the computer screen, "Clear paper jam." When the problem first started yesterday the message was that the printer was "Out of paper." I need to print a resume and this is just the wrong time for someone such as myself with little computer knowledge to try to figure it out. Thanks for any suggestions!

Hi there pattimessick,
You may not need to remove/re-add. Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own (especially connectivity problems) and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How do I connect my HP Deskjet 1050 All-in-One Printer - J410a to a wireless connection

I have a
HP Deskjet 1050 All-in-One Printer - J410a
I am connected to a computer but would also like to connect it to my laptop wirelessly.
Can't do it. Must be doing something wrong. Need help thanks.

Hi @5468,
Welcome to the HP Forums!
I noticed that you are wondering how to connect your HP Deskjet 1050 All-in-One Printer - J410a to a wireless connection. I am happy to look into this for you!
According to your printer's specifications and the Setup Poster, this printer can only be connected to a computer via a USB 2.0 printer cable connection. This printer does not have wireless capabilities.
Hope this answers your question, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

My 5250 all in one won't email with Windows 7

Since I installed windows 7 my 5250 all in one won't e-mail anything since I don't have WINDOWS MAIL ANYMORE, and it only gives you windows mail as the only option to email.
Anyone know how to correct this?

In the Start Menu, type 'Live Essentials', and open the option which says to go online to get Windows Live Essentials. This way, you can install Windows Mail.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

6150 All-in-One won't print black

My HP Photosmart 6150 All-In-One won't print black. There is a new black cartridge and all the other inks are fine as well. I've cleaned the printhead 3 times and all that printed was yellow. I then ran an alignment. The alignment failed, but it wasn't because of a paper issue. The manual says it could be that the printhead assembly or the sensor is defective. Is it worth getting that fixed, or should I just get a new printer? I've had this one for 8 years and it's worked great until now.

Hi , Welcome to the HP Forums! I noticed that your HP Photosmart c6150 will not print black. I am happy to look into this issue for you! According to this guide, Color Mix or Missing Colors on the Diagnostic Page, it states: Missing colors occur when the printhead nozzles dry out. Since you have tried cleanign the printhead multiple times, and the issue is still occuring, I would consider having the printer serviced/or replaced. Please contact HP, phone support for further assistance. (After you fill out the information, you will be given a phone number.) If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector. Best regards! “Please click the Thumbs up icon below to thank me for responding.”

My Apple wireless keyboard won't connect to my Mac mini any more.

My Apple wireless keyboard won't connect to my Mac mini any more. Going through the Bluetooth Setup Assistant doesn't help - the computer finds the keyboard, but when I type in the pass code it fails to pair with it. The green LED on the bottom of the keyboard flashes twice at roughly two-second intervals. I've tried replacing the batteries and this has had no effect. I have all the latest software updates installed.

Welcome Cheirhandrea!
There are easily hundreds of variants of the iMac dating back to 1998. Many of the pre-2006 iMacs this forum covers cannot support an Apple wireles keyboard. Because this model has been in production for so long, it is important for you to let us know as much about your computer as possible so someone won't give you information that may not be appropriate to your iMac variant.
So we need to know:
1) Your processor type and Mac OSX version, both available by doing "About this Mac" from your Apple menu at the left end of the menu bar:
2) The make and model of the keyboard.
I asked for your Mac OS version because "iOS" as currently shown in your equipment profile cannot run on any Mac computer, only Apple's mobile devices. Once you get the OS version from "About this Mac," please change your profile to avoid further confusion and get help faster without the delay of someone having to ask for clarification before they can start helping.

My HP7280 all in one can't find my wireless router

My HP Photosmart C7280 all in one can't find my wireless router even after I enter my WEP key and ESSID. My other computer is wired into the printer and it works but not wireless. Can anyone help me?

Is the other computer wired with USB? if so that is fine. If it is wired with Ethernet, that is the source of the wireless problem.
What router? Oh, and don't use WEP, it is not in the least secure. I recommend changing your router settings to WPA, create your own password and then try to connect the printer.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I forgot my passcode, so I was unable to access my phone. I then tried to restore it, but it has frozen during the process. It won't connect to my mac again and I can't stop the process because my lock button is broken. What do I do?

I forgot my passcode, so I was unable to access my phone. I then tried to restore it, but it has frozen during the process. It won't connect to my mac again and I can't stop the process because my lock button is broken. What do I do?

My first advice is "Back up the device, then have it replaced." Second item of advice, "Don't forget your passcode."
One of the purposes of the lock button is to recover from certain software failures. Without the lock button, such a recovery is nearly impossible. My advice would have served you best when the malfuction first developed, not after you forgot your passcode.

My iPod won't connect to my Mac... Help?

My iPod won't connect with my Mac anymore.
It connected last time I tried it (four months ago, about). It's a Gen Two or Three (I don't know the difference, sorry) and I haven't changed anything about my Mac since then, or my iTunes.
If you can help at all, please reply. And don't hesitate to ask for more info.
EDIT: Oh, and I've tried resetting the iPod, putting it in Disk Mode, using a different USB port and restarting the computer (several times).
The iPod says "Do Not Disconnect" and the iPod symbol appears on Finder and I am able to access it, but it won't appear in iTunes.
Message was edited by: Hortaux

I was having the same problem--no iPod on Desktop, no iPod in iTunes. This fixed it for me, at least:
1. Open Applications > Utilities > Disk Utility. (My iPod DID show up here, though it wasn't mounted.)
2. Select the iPod in the disk list on the left.
3. Click "Verify Disk." (In my case, this revealed an underlying error.)
4. Click "Repair Disk." (If this works, great--stop here. It didn't work for me...)
5. Click the "Erase" tab at the top of the right-hand main pane.
6. Choose Mac OS Extended (Journaled) for Volume Format.
7. Click "Erase" button at bottom right.
Almost immediately, my iPod showed up on my Desktop, iTunes launched, and it was as though I had completed a Restore of the iPod.
Hope that helps....
David

My iphone 4 won't connect to my mac. It says that I need to install the lastest version of itune (11.1) but when I try to update itunes it says that I have the current version 10.6.3. Can someone please help!

Hi,
My iphone 4 won't connect to my mac book, it says that I need to install to latest version of itunes 11.1. When I go to itunes and try to update, it says that I have the latest version (10.6.3). Can someone please help me!
thanks

You are probably running OS 10.4 or 10.5 on a PPC Mac. No version of iTunes higher than 10.6.3 is available for these older Macs. I have the same problem, and while I can still use the PPC to sync my iPod, it can't be used to sync an iPhone 4 or higher. The only solution, as I discovered after upgrading to the iPhone 4, is to buy a newer Mac. I was able to get a 2006 MacBook running Lion for under $300, and that has been a lifesaver.

So, my phone won't connect to my mac computer when I plug the USB charger into my computer and then into my phone it won't charge or connect. How should I fix this?

So, my phone won't connect to my mac computer when I plug the USB charger into my computer and then into my phone it won't charge or connect. How should I fix this?

Test with another computer and another cable
To discover if the problem is eith the phone the cable or computer

HP 3510 all-in-one won't connect to wireless - MAC filter

Similar Messages

Maybe you are looking for