HP 3D DriveGuard 5 Fails Driver Install

I'm running Windows 7 Pro x86 on an HP EliteBook 8570p Laptop. The device manager shows Unkown Device with Hardware ID of ACPI\HPQ6000 which is the HP 3D DriveGuard 5. I've downloaded the most recent driver and still the install fails near the end of the install process with:
"there is a problem with the Windows Installer Package. A program run as part of the setup did not finish as expected....."
If I try to install the driver using the Update Driver manually from Device Manager, It fails with "The install class is not present or is invalid".
Any insight to install this driver would be greatly appreciated.

You might try posting in the business support forums.
http://goo.gl/LsnuK
Was this notebook configured with a RAID option? If so, check that the Intel Matrix Storage software is current.
You could try downloading the program again using a different browser.
I do recommend trying the enterprise forums to see if they may have more insight regarding this.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

System restore. failed driver install

Was having issues with the laptop so decided to do a full factory reset using the built in windows HP recovery. This failed so then used the recovery discs provided and worked to a point.
Formats OK, copies files OK, asks for the driver discs and does that (appears so) OK. Reboots and installs windows then HP software and drivers. What seems to be forever system reboots and then tells me its failed due to no drivers.
I have attempted this now 4/times with same result. These discs were provided by HP as my drive failed previously so should be the correct discs. This is the only HP machine and the only HP discs I have ever had.
Currently the machine is useless, unable to do anything. No way to get to desktop to manually install drivers after. Very annoying to say the least

Test the hard drive and memory modules, run the extended and quick tests, post back any errors or messages
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00439024&tmp_task=solveCategory&cc=us&dlc=en&la...

My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer s

My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer service rep gave me a link to download off the Adobe site, but when I try to open the file to run it, I get this error message - "A problem occurred extracting the archive".
Can anyone help?

Yep. Nothing happens at all. Windows tries to execute the uninstaller, but I don't get any other screen and all activity stops for the MSI. I monitored it in Process Monitor and the MSI executable appears, but is quickly ended, like it couldn't find anything or something.
It's as if windows has a blank entry in Programs and Features, because it used to show the size of the Adobe application in the "Size" column. Now it's just blank. Link to screenshot below:
http://img829.imageshack.us/img829/5006/screenshotcaf.jpg
Note the install date. That's when I was able to successfully reinstall it. Now I can't even do that. I should also mention I tried Revo Uninstaller. It deleted one small registry key, but nothing changed.
By the way, is the CS cleaner supposed to ask for a disc in the drive when you run it? It refused to run unless I had one in it, so I used my install dvd.

WLAN driver fails to install on G580 Windows 7 x64 with error "BCM4313: Can not find setup file"

Summary:
I have installed Windows 7 Ultimate x64 on my G580. Everything is working fine except the WLAN driver fails to install with the error "BCM4313: Can not find setup file".
Details:
I bought lenovo G580 with Windows 8. Since my parents are not comfortable with the learning curve of Win 8, I successfully downgraded to Windows 7 Ultimate x64. Everything is working fine but my WLAN card is not recognized because of lack of driver.
The lenovo parts look-up page says I have broadcom WLAN card - CBT BCM4313 MOW HMC WLAN
I looked at lenovo driver downloads site and tried following driver files for Windows 7 and both of them failed to install with the following error. I tried installing other WLAN drivers also but they won't even install as required hardward is not there.
Error - "BCM4313: Can not find setup file"
Drivers Tried:
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028105
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028208
Any help about how to get past this error will be appreciated. The previous Widnows verison (Windows 8) is still on my hard-drive as windows.old folder. Let me know if I can copy a specific file from there.
Thank you.
BJS
Solved!
Go to Solution.

Download this driver bcm4313
Start setup and extract the files.After that go to star menu/control panel/system/device manager.There you probably find out that network adapter driver is missing.Choose it and click with right mb for drop menu to show up.Select properties then Driver/Update Drivers...Select to load driver from computer hard drive and choose the path where extract files is.Default path is main partion C: and search for directory named Driver.
And yes...you get "Can not find setup file" error but dont worry.Files needed to instal driver are extract fine.

My computer failed to install the compatible driver software when updating my iphone and now my iphone is unusable as it is requesting me to connect it to itunes but i physically cannot connect to itunes... help me please?

my computer failed to install the compatible driver software when updating my iphone and now my iphone is unusable as it is requesting me to connect it to itunes but i physically cannot connect to itunes... help me please?

Hi there croadstar,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W.

USB Console (Serial) Driver fails to install on Windows 8.1 x64

The USB console cable driver v3.1 will not install on Windows 8.1 x64. Had a similar problem with Windows 7 x64 but this was fixed using Greg's (greggar25) excellent step-by-step procedure (see post: https://supportforums.cisco.com/discussion/11492306/usb-console-driver-install-failing).
I am using the driver from this link: http://software.cisco.com/download/release.html?mdfid=282774228&flowid=7442&softwareid=282855122&release=3.1&relind=AVAILABLE&rellifecycle=&reltype=latest
I followed the same procedures I did for Windows 7 and the install goes without a hitch. Reboot and connect the USB cable, opened Device Manager and now I have a COM Port randomly appearing and disappearing with its number incrementing well above 1,000.
A few times while it appeared for a few seconds, I was able to right click on the properties, update the driver and chose Cisco Serial and it settled down but it did not assign a COM port. Then a few seconds later, it starts the disappearing/reappearing thing again.
Anyone have luck getting this to work with Windows 8.1 x64?

Hi,
open Device Manager by simply typing the words on the Windows 8.1 Start Screen. The Search Charm opens and click Device Manager in the displayed list.
In Device Manager a new hardware category, CiscoUsbConsoleWindowsDriver, is displayed. It has two components: the Cisco Bus enumerator and the Cisco USB to Serial adapter. Expanding the Ports hardware category shows a new Cisco Serial port.
or
Look into below
https://supportforums.cisco.com/discussion/11492306/usb-console-driver-install-failing
1) Install the usb console driver\windows 64\setup(x64)
2) Follow the wizard and accept the defaults
3) Restart the computer (the installer usually says it needs a restart)
4) After restarting the computer, plug in the usb cable
5) The computer should say installing Device driver software and fail at the Cisco Virtual Comm Port00
6) Click the Windows button, right click computer, manage
7) Under Computer Management, Click Device Management
8) Go to Ports (COM & LPT)
9) You should see the Cisco Virtual Comm Port00 with a Yellow Exclamation point on it
10) Right Click on the Cisco Virtual Comm Port00 and select Properties
11) Click the Driver Tab
12) Click Update Driver
13) Select Browse my computer for driver software
14) Select Let me pick from a list of device drivers on my computer
15) Choose the Cisco Serial Driver
16) Device Driver is installed successfully, take note of the com port it is using and enjoy.
HTH
Sandy

HT1338 How to install OS X on a new HDD to replace a failed drive?

My sisters MacBook (Late 2006) HDD has failed. I have a spare drive that I would like to install OS X onto to replace the failed drive. Whats the best way to do this and which version of OS is best to install for this model MacBook?

Hello, it'd be best to use the Original Install Disc while booting the MacBook from it, but a Retail 10.6 Install Disc may work...
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57

R5850 Display Driver Install Fails

Hello.
I have a problem installing MSI's official drivers for my R5850-OC. When I first received the card, the official drivers installed fine. Also, upgrading to the newest MSI official drivers worked fine. However, if I ever wanted to remove the drivers to roll back or w/e, I get a BSOD in the middle of Catalyst Install Manager uninstalling.
Now, If I want to install any of the official MSI drivers, I get a warning that the ATI Display Driver fails to install. However, it appears I can install any of the ATI/AMD drivers just fine. I'm currently using Catalyst 10.12.
The reason why I want to fix this, is because I currently have a HDMI Audio problem with the card and Media Center and wanted to try different drivers.
Thanks for your help,
~Mason
P.S. I seem to remember encountering a problem installing the Official drivers long ago, but fixed it by manually installing the display driver via device manager, and using catalyst for everything else.

OK, install a program called Unlocker >>http://filehippo.com/download_unlocker/<<. Then, try removing anything ATi with DriverSweeper in safe mode. Don't restart. Run DriverSweeper again, but analyze only. Find the left over driver(s) location and right click on them to run unlocker and delete them. This may or may not blue screen you, so don't be surprised if it does. Restart. Run a registry cleaner to get rid of any extra stuff and then try installing the MSI drivers.
If you're still experiencing audio issues, try checking the HDMI cable itself (I'm assuming you're using that). Make sure there is no exposed wire or excessive bending. Also, check the physical connection on the card so that nothing is loose or missing.

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....is there some trick I am missing or do I need to make an appointment with a genius...

I have the MacIntosh volume and the Boot Camp partition only. I know that when I installed Lion, I had to go through a whole back-up and recovery of Windows and then re-format the drive.
The tech at the Apple Store had a previous life as a MSCE and was very helpful. I believe he even said that I should not have htis problem with Mountain Lion which is why they gave me the flash with it onboard. I was in the process of starting a new job when I went to Lion, so I have waited to do this next and probably last upgrade to this old MBP since I doubt Apple will support this MBP in Maverick.
I do not have another installation, so that is not an option. I will try to create an external, I have plenty of hard drives around and see if I can get it done that way. It might take me a week or two to get back to it, but I will comment back upon completion of that effort. Thanks for your help....Dave Iverson

Fail to install broadcom bluetooth 2070 driver

fail to install broadcom bluetooth 3070 driver on my HP pavilion g4-1007tx
error message came out was error 1935... tried reinstalling the drivers but still fail

Now look what you've done.
You've gone & gotten "all specific" so the wannabesthat like to sound important by throwing links at you, have run a mile.
Lol.
Just take it to a proper tech dude, or go to a reputable fix it yourself site like this one & don't waste your time here. (I of course got thrown here from google & cringed).
HP are legendary for having problems that develop smaller problems, immigrate to problemville and breed with other siblings of similar problems to have more problems.Wanna try tech support?? They will tell you that if its your fault (He*l, you have no idea if it was; and they know it!!!) so you won't go there unless your super pis*ed, extremely rich (odds are if your trying to fix it yourself you aint) or have had enough.
Buy a Toshiba, ASUS or Acer, anything but an HP.
My advice, uninstall & re-install it & see how you go, if your lucky it may work.

On Startup Task tray balloon states L7780 Driver Install failed.

By running the install for my L7780 software (version 8.0.3) in Vista Capatibility Mode it installed in Windows7. I connect to my printer wirelessly. The Solution Center seems to work OK and I can printer from applications. From my laptop I was able to setup the FAX and the FAX test passed. Everything seems to be working correctly except when I bootup my laptop. When I do,I get a task tray icon stating that it is installing a device driver. Then I get a tasktray balloon stating that the driver install failed, but everything still works. How do I prevent the ballon and icon from appearing? The icon is in the hidden icons.

The progress bar usually means your Mac is booting into the Safe Boot startup, Safe Mode.
Do you see "Safe Boot" in the upper right hand corner of the screen.

Drive setup Driver install failed, result=0x8024001E for devnode 'PCI\VEN_1180&DEV_E823

This seems to be a t430 related driver.
How do I setup the driver correctly and prevent these errors (close to 1000 in total) to popup?
Driver install failed, result=0x8024001E for devnode 'PCI\VEN_1180&DEV_E823&SUBSYS_21FB17AA&REV_04\4&1BBEF491&0&00E2'

Paul Tikkanen,
Thank you very much for your reply, unfortunately, I have already installed these drivers including the previous versions with no luck.

Failing to install driver of SB Live! B880

*Failing to install driver of SB Li've! B8808Hello!
I switched from Windows XP to Windows 7 and now I need to reinstall my Creative Soundblaster Li've! B880, which uses the?EMU0K sound processor.
I can't find the installation CD anywhere in my house, and I've tried all kinds of drivers including?<a target="_blank" rel="nofollow">Li'veDrvUni-Pack(DUT).exe[/url]?(this should be the one..) and others. They all come back with the same massage:
"The installationprogram was unable to find a Sound Blaster soundcard in your system. Make sure it is installed properly." (free translation from Dutch)
When I go to Device Management I see 3 things not installed, but I can't get the right driver anywhere..
Can you please help me?!
Kind regards,
Ren?

Hi! Try this driver package (from modder "daniel_k")
http://forums.creative.com/t5/Sound-Blaster/SB-Li've-series-Support-Pack-2-0-04-30-200/m-p/55606#M5480
Hope it hel
ps.

Pnputil - failed to install the driver

Hi,
I run cmd as admin, windows account is too admin, directory is OK, but I still can not install driver (for StarSign CUT device). Driver is official, and if I install driver in Explorer, everything is OK.
Windows 8.1 64bit, last upadate. HP 350 G1. On the another two PCs, everything runs good. Do anybody have some tips for solve this problem? Thank you.
D:\driver>pnputil -i -a SZCCID.INF
Microsoft PnP Utility
Processing inf : SZCCID.INF
Failed to install the driver on any of the devices on the system : No more data are avalaible
Total attempted: 1
Number successfully imported: 0

Hi Ding27,
What is the commands used on the other two PCs? Why not take use of Device Manager to install the proper drivers?
It seems to be a little problem when using the pnputil command.
You may take a try with the following:
pnputil /a /i <file path/inf file name>
Reference:
PnPUtil Command Syntax
PnPUtil Examples
Best regards
Michael Shao
TechNet Community Support

Fail to install driver HP1050 deskjet for windows 8 when connecting printer with computer

I have this great HP desket 1050 printer for less than a year. My computer broke down so I bought a new one, but now with windows 8.1. So my printer was not working anymore, I fail to install my new printer. I can install the driver for HP1050 deskjet, but then there is a moment that you have to connect the PC and printer with an USB cable. This is the moment that the installation fails, nothing happens when I plug my printer into my PC. So I never finish the installation process complelty. The same thing happens when I choose add printer later and then add my printer. My printer is on and the cable is well plugged in. Anybody any suggestions as I would like to use this printer again. Thanks in advance

Hi @Annemarie85
I understand you are unable to complete the installation of your Deskjet 1050.
Please use the following document to troubleshoot the issue, and let me know the outcome of your efforts; Windows: 'Device Setup Failed to Complete' or 'Unknown Device' Message Displays on the Computer Duri....
I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP 3D DriveGuard 5 Fails Driver Install

Similar Messages

Maybe you are looking for