HP 400 M401n is very slow

Question

My printer is really slow.  How can I speed up the rate it prints.

Answer 1

Hi,
Please check the following solutions:
Solution 1: Use a lower print quality setting
Solution: Check the print quality setting. Best and Maximum dpi provide the best quality but are slower than Normal or Draft. Draft provides the fastest print speed.
Cause: The print quality was set to a high setting. If this did not solve the issue, try the next solution.
Solution 2: Check the ink/toner levels
Solution: Check the estimated ink levels in the ink/toner cartridges. NOTE: Ink/toner level alerts and indicators provide estimates for planning purposes only. When you receive a low on ink/toner message, consider having a replacement cartridge available to avoid possible printing delays. You do not need to replace the ink/toner cartridges until print quality becomes unacceptable.
CAUTION: Wait until you have a new ink cartridge available before removing the old ink cartridge. Do not leave the ink cartridge outside of the printer for an extended period of time. This can result in damage to both the printer and the ink cartridge.
For more information, see: Check the estimated ink levels
Cause: The ink cartridges might have insufficient ink. Printing with depleted cartridges slows the printer. If this did not solve the issue, try the next solution.
Solution 3: Contact HP support
Solution: Contact HP support for service. Go to: www.hp.com/go/customercare. This website provides information and utilities that can help you correct many common printer problems.
If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
Cause: There was a problem with the printer.
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.