Hp 4015: Printing problem on A5 LABEL

Hi, my new HP LJ 4015 have a problem when I print A5 LABEL, because the ink are not fixed hard on label.
I Use MANUAL TRAY 1, LINEAR OUTPUT on the back oh the printer, I set Size and Label type, I try to setup Fuser setting to HIGH 2, ENABLE SLOW SPEED, but the problem are not solved.
The problem increase to the bottom of the A5 label, maybe because the ink needed more times on the fuser for fix it hard on label...
Can you please suggest me the BEST CONFIGURATION for printing LABEL on this Laserjet??
Thanks. Bye

I have a couple of suggestions here, but these are both just guesses, since I can't see the label media that you are using.
1. If the label is thick, you may want to try setting the paper type to "heavy media".
2. If the label is slick or shiny, it may not work well with any laser printer. Was this label made for laser printing?

Similar Messages

Label Printing Problem, Laserjet Professional p1566

I have this problem and it's getting me crazy.
I just bought a Laserjet Professional p1566 and I'am trying to print a Tico label (LP4W-3714, 5 collomns, 20 rows) for tubes in the lab. The problem is that when I print, the printer loses the exact position of the labels, i.e. in the vertical view, for the first rw it starts almost in the correct position, then for the last row it finishes in the 19th row instead of 20th. It means that it prints the whole page a little smaller than the actual size, so it prints everywhere, on the labels and in between as well. On horizontal aspect I have the same problem somehow. Before I had a Laserjet 1010 and it had the same problem of the vertical positioning, but not the horizontal.
Any help would be appreciated

Upgrade to CR XI R2 for free and test again

Production Order Confirm/Label Printing problems

I am currently having issues printing out labels for production orders. Whenever I confirm an order, our printer will print out a different quantity or no label at all.
Here is a brief history of production order confirmations today....
Entered                Printed
80                           40 (2 labels of 20)
20                           No Print
20                           No Print
40                           No Print
ALL confirmations were accepted by SAP
SAP WILL often drag during a normal confirmation when correct labels are printed
SAP will NOT drag when a confirmation is entered and no labels are printed
Yesterday I had a confirmation for 10 print out a label for 19. All of the quantities in SAP are correct, it's only the printer that is creating labels for different quantities. If all the lot sizes in SAP are correct, what do you think the issue might be?

Hi,
Based on what i understand of your query, would suggest to work with your technical person to have a look at the print program. The delay you notice or the incorrect data being printed might have to do with the program.
Regards,
Vivek

HP Laserjet 4P Printing Problems

I am using a Mac G4 with 10.4.7 and printing on a HP Laser Jet 4P using driver HP Laser Jet 4 Series Gimp.
When I first print a page or 20 pages of the job, all works fine. Once I go to print another job, I get the msg "GIMP Printing Page 1, 15% and the printer will not print no matter how long I wait. The only solution is to turn the printer off, re boot the Mac and then it will print one job. To print another job, without a failure, I must turn off the printer again and re boot the Mac. This is really a problem, especially when printing UPS Shipping Labels. Any idea how to correct this problem ?
I do not have the problem with a Epson Printer with standard Mac Drivers. But The HP Laser is so much cheaper to do volume printing, I prefer to use the Laser Jet 4P.
Thank You for your help
Paul

Here is the latest update on the HP LaserJet 4P printing problem.
1. I went to Library>Printers and dragged the Icon (HP Laserjet 4p.app) to the dock. Printer still will not print.
2. Reloaded the driver HP Laser Jet 4Plus v2013.111
Printer will not print. Error mag on printer is (W2-Invalid Pers)
3. Reloaded the driver HP Laser Jet 4 series Gimp Print V5.0.0 Beta.
Printer will print one Job (1 page or 20 pages). Send another job and it will not print.
4. Downloaded the HP Driver for Laser Jet as was instructed in an earlier post
( HPlaserjet v552.dmg) I double click on the .DMG file and it brings up a Icon of a Disk Drive on the desktop HE LaserJet V5.5.2.051. Double click on that icon and a window opens with the same information. There is no place to click to install this driver.
I do not believe the HP Laser Jet 4P has a problem as I can hook it to a PC and it will print one job after the other, never a problem.
How do I get the driver mentioned in #4 to appear in the HP Print drivers list in the printer setup utility so I can select it.
The Parallel to USB converter I am using was the one recommended earlier this year as the one used by a few here on the forum to run their HP Laser Jet 4P.
I could forget the HP Laser Jet and go with my Epson printer. However with amount of business printing and UPS Labels the ink cartridges is very costly. The Laser Jet will run for almost 2 years on a Cartridge. Others have made the Laser 4P work on a Mac. Please scan through my first post and replies to get a flavor of the problem.
Thanks for your continued support. Needless to say, I am lost in this problem.
Paul

How to use Zebra print chinese in a label?

Hi Everyone,
I got a problem in printing chinese in a label.Also i have download zebra fonts and test two of them.But it seems not work.Should i upload a specific font by se73? Or use any command to control this?
thanks advance.
Andy Lee.

No. One label, one font, size and color.

Printing problem on A5 paper

Printer product name : HP Deskjet Ink Advantage 3515 All-in-One
Operating system : Mac OS 10.8.2, on 15” MacBook Pro laptop
I have downloaded and installed the current version of HP driver software (HP_Mountain_Lion_Ink_SW_v12.23.41) for the above printer, but cannot print on A5 paper as the choice of A5 actually does not appear on the list of paper sizes when printing. I have also tried to put the correct dimensions (148 x 210 mm) in custom sizes under 'other', but it still won't print correctly on A5 (the print starts near the bottonm of the page and does not complete). I am using documents produced in MS Word for Mac.
Is the solution to this problem to download some other version of the software and reinstall?
Any help would be appreciated.

I have a couple of suggestions here, but these are both just guesses, since I can't see the label media that you are using.
1. If the label is thick, you may want to try setting the paper type to "heavy media".
2. If the label is slick or shiny, it may not work well with any laser printer. Was this label made for laser printing?

Printing problems using Photoshop Elements 6

I have been using Photoshop Elements 6 for several years and am currently having printing problems, e.g., some prints are too light, some are too saturated, or too dark...they just don't look like the screen which looks pretty good. I use Spyder 3 Pro to calibrate my monitor. Does anyone know of any websites that address these type of problems. Looking for some advice, tips, etc.
Thanks.

Does this happen only in PSE6 or in other programs that can print graphics, like Acrobat or Word or PowerPoint?
I only ask because my LexMark started to vary color saturation shortly before the print head dumped an entire cartridge onto one page and it gave up the ghost.
It wasn't just pictures. Word documents would go from light to dark. Graphics (business cards, labels) would print bright and then dim on the same page.

Printing Chinese Characters on Labels using ZEBRA

Dear all,
Could someone tell me how to Print Chinese characters on labels using ZEBRA Printer.
Thanks & Regards,
Joseph.

Hi Joseph,
How were u able to resolve your issue on Chinese font printing using Zebra? This is because I'm supposed to print Chinese texts & data using Zebra label printer. The problem is, inspite of using the Chinese font residing in the printer's memory card, i am not getting any output whenever i run a standard SAP report (VL74) calling a customized saprscipt report. Please help check my codes below. Also, I'm not sure of the command ^A1B, if it is still needed everytime i try to print a text, since i already used the command ^CW1,B:MSUNG.FNT.
I placed them in the Main area of Sapscript. Thanks in advance.
PERFORM 'GET_MORE_DATA' IN PROGRAM 'ZTEST'
USING &NAST-KSCHL&
USING &VBPLK-VENUM&
USING &VBPLK-VPOBJKEY&
USING &VBPLA-KUNWE&
CHANGING &GF_MAKTX&
CHANGING &GF_VEMNG&
CHANGING &GF_KDMAT&
CHANGING &GF_VBELN&
CHANGING &GF_MATNR&
ENDPERFORM
/:NEW-PAGE
/ ^XA
/ ^CW1,B:MSUNG.FNT
/ DFZ5L3_L-1FS
/ ^PRC
/ LH0,0FS
/ ^LL1981
/ ^MD0
/ ^MNY
/ LH0,0FS
/ FO700,649A1B,48,0FRFN999^FS
/ FO1084,309A1B,46,0CI0FRFN998FS
/ FO315,330A1B,46,0CI0FRFN997FS
/ FO459,1351A1B,46,0CI0FRFN996FS
/ FO829,396A1B,46,0CI0FRFN995FS
/ FO54,1777A1B,46,0CI0FRFD中文 1FS
/ FO186,1774A1B,46,0CI0FRFD中文 2FS
/ FO318,1774A1B,46,0CI0FRFD中文 3FS
/ FO315,814A1B,46,0CI0FRFD中文 4FS
/ FO456,1777A1B,46,0CI0FRFD中文 5FS
/ FO12,18GB1162,1942,6^FS
/ FO147,18GB135,1942,6^FS
/ FO411,18GB135,1942,6^FS
/ FO660,18GB135,1942,6^FS
/ FO916,18GB135,1942,6^FS
/ ^XZ
/:NEW-PAGE
/ ^XA
/ ^XFZ5L3_L-1.ZPL
/ FN999FD&GF_MAKTX&^FS
/ FN998FD&GF_VEMNG&^FS
/ FN997FD&GF_KDMAT&^FS
/ FN996FD&GF_VBELN&^FS
/ FN995FD&GF_MATNR&^FS
/ ^PQ1,0,1,N
/ ^XZ
/ ^FX End of job

Color Printing Problems

OK, this one is strange. I have been using Safari on this iMac since day one. It is currently at 4.0.5. I print eBay invoices/packing slips for my customers, usually about 10 - 20 per day, via the normal eBay web page, over to my USB-attached Canon MP610 printer. Been working fine. Until yesterday. The invoice page is normally "mostly" in black print, with my logo in the upper left corner printing in color. Yesterday, the black text started printing in a light violet color! Before yesterday, there were column headings that printed in a lighter shade of black, kind of dark gray. They still print in that color. The stuff that used to be dark black is what is printing violet.
The Canon MP610 has TWO black ink tanks (why??), and the larger one was down to about 25% remaining. Thinking that perhaps this was the problem, I purchased two brand new cartridges and put them in. Same result - violet print. Ran the test print page and it looks OK.
OK - I started up Firefox and printed the same exact page. It does NOT print violet. It prints exactly the way it is supposed to. I started up the Pages app and printed a text document. No violet printing. I only get the hosed black print when I use Safari.
Also, I tried printing a USPS shipping label while running Safari - it also printed violet, so it isn't something screwy with eBay's web pages. I re-printed it with Firefox and it printed just fine.
Can anyone point me in the right direction to get this fixed? Why does Safari print wrong and Firefox print right, to the very same printer? I'd sooner use Safari and not convert everything over to Firefox.
Thanks, Jim

HI,
Go to ~/Library/Preferences. Move these files to the Trash. ~ (Tilde) represents your Home Folder.
com.apple.print.PrintCenter.plist
*com.apple.print add.plist*
com.apple.print.custompresets.printcenter.Canon.plist
com.apple.print.PrintingPrefs.plist.
Your .plist file names may differ slightly. *Do not empty the Trash.*
Restart your Mac.
Carolyn

Help trouble shooting PRINTER PROBLEM within Numbers using Leopard

Help!! On both my spreadsheet created and other templates I've attempted printing, the print preview looks perfect (with the spreadsheet centered on the page)... but when they print, instead of printing centered like the preview, the print runs off the top and starts printing with no top margin and partially through my spreadsheet.
I reinstalled my HP Photosmart C4280 printer, and downloaded the updated beta driver found on HP's website. This did solve the problem. Is anyone else having printing problems? What else could I try?!
Thanks!

I called Apple tech support and got an answer! In Numbers, we must use the Document Inspector to "format for" the printer we're using. I have 2 printers installed, and it was defaulting to my label printer. When I switched to my HP printer, I had to make some small tweaks to my page format, and then it printed perfect.
Hope this can help someone else!

More PDF Printing Problems

There are lots of notes in this forum crying about PDF printing problems. For what it's worth, I'd like to add mine.
I'm using Jakarta FOP to generate a PDF on the fly from XML data. The PDFs it's producing are read and displayed nicely by Adobe Acrobat and print from Acrobat without a problem.
I've also written a simple desktop app that exercises the java.print package. (I won't bore anybody with a listing.) It uses the PrintServiceLookup to discover the two networked printers I have attached to my machine, using DocFlavor.INPUT_STREAM.AUTOSENSE. I have it discover all the supported document flavors. Here's the result:
application/octet-stream
application/x-java-jvm-local-objectref
image/gif
image/jpeg
image/png
I can sent text documents to the printer without a problem. But when I try to send a PDF generated by FOP that renders and prints fine from Acrobat, I get gibberish text out. I'm using DocFlavor.INPUT_STREAM.AUTOSENSE as my DocFlavor when I create the doc.
I don't see application/pdf on my list of supported document flavors. Should I? If that's a requirement, what do I have to do to the printer to get it on the list? Why is Adobe Acrobat smart enough to print to a printer wo/ this flavor and javax.print not? TIA - MOD

Now I get it - I can't send PDFs from Java to a printer. A careful reading of forum threads and John Zukowski's note have driven a stake into the heart of the vampire.
I can bring them up just fine by creating the PDF using FOP and then sending the page back to the browser for rendering. If my client could just print the document from his machine, all would be well.
However, my app has a situation where some label printers will ONLY be attached to the server. They won't be visible from the client. I thought I had a solution with javax.print, but now that hope's gone.
The printers I have aren't Postscript, so suggestions to ask FOP to generate Postcript won't help me.
Adobe's site didn't offer any relief.
I haven't been able to find any for-fee or open source packages that might help. Plenty of stuff out there to convert to PDF, but nothing that helps to print it once you have it.
Is there any point in entering this as a bug in the database? It's less bug and more vaporware. After all, the docs never SAID they'd thrown an invalid flavor exception if you tried to print a PDF.
Sun, are you listening? - MOD

Airport Extreme Printing Problem with HP Deskjet.

Hello ... I wonder if any helpful folks can assist me with my printing problem? I am using Tiger on a new Intel imac with a HP Deskjet 960C. This printer is listed as having the latest drivers included within Tiger and works perfectly when connected via USB so my problem I guess is not with the software....I have disconnected everything and plugged everything back together again. I also deleted the printer from the printer list within the Printer Setup Utility application.... The imac recognisies the printer and upon pressing the print button everything feels as though its just going to work. The blue barber shop scroll appears but the printer fails to kick into gear and I get the big red exclamation mark appearing in the status box .... I would really love to try and sort this annoying error ... Any ideas? Thanks. Book G4 Mac OS X (10.4.4)

Hello jds17. Welcome to the Apple Discussions!
Unfortunately, not all USB printers are compatible with AirPort base stations.
Take a look at one of these iFelix Unofficial AirPort Printer Compatibility links, depending on which AirPort base station you have:
o 802.11g AirPort Extreme Base Station (AEBS) or AirPort Express Base Station (AX)
o 802.11n AirPort Extreme Base Station (AEBSn)
If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also, you may find the following Apple article helpful.

Not printing text-only graphics on Canon. Not printer problem-print ok on Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Not printing text only on Canon--grahics print ok. Not printer problem. Prints ok on a Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Without your printer model numbers, readers can only give you vague general directions.
System Preferences > Print&Fax > ...
... shows a list of all set-up printers.
If you are having serious problems, it makes sense to "Reset the Printing System" (which also removes all printer set-ups) and add back each printer. It only takes a few minutes.
Mac OS X 10.6 Help: Resetting the printing system

Report Toolkit Standard Report Print Problem

We are trying to print a label out on a Zebra QL220+ Thermal Printer. Using the Report Generation Toolkit and selecting the Report Type as "WORD" it works fine. However by ONLY changing the Report Type to "STANDARD REPORT" it still prints out the label OK, but then scrolls out another blank label - it's like some sort of form feed character/command is somehow being appended.
We don't want to use the WORD Report Type, because I assume we have to install MS Office, which we don't want.
As you can see from the attached VI, it is just some very basic text that we are writing to the Label.
Is there some way we can see what data is actually being sent to the Printer for the two different Report Types?
Chris
Attachments:
Zebra Label Print.vi ‏43 KB

If your printer is networked you would open a TCP connection on port 6101 to the printer. If serial simply send the data via normal VISA commands.
Here is the CPCL for the one example label in your code:
! 0 200 200 440 1
TEXT 0 2 10 10 Date: <DATE>
TEXT 0 2 10 30 Time: <TIME>
TEXT 0 2 10 50 Operator: <INITIALS>
TEXT 0 2 10 70 Location: <LOCATION>
TEXT 0 2 10 90 Reason: <REASON>
TEXT 0 2 10 110 Post Comment: <COMMENT>
TEXT 0 2 10 130 S/N: <SN>
TEXT 0 2 10 150 Dryness Fraction:
TEXT 0 2 10 170 Signature:
LINE 100 190 300 190 1
PRINT
In the above label you would programmatically replace the "<x>" fields with the actual data you wanted printed. For your multiple S/Ns you would use a loop to add the lines with each S/N.
From the CPCL manual here are the pages for the elements I used above:
TEXT Commands
The TEXT command is used to place text on a label. This
command and its variants control the specific font number
and size used, the location of the text on the label,
and the orientation of this text. Standard resident fonts
can be rotated to 90° increments as shown in the example.
Format:
{command} {font} {size} {x} {y} {data}
where:
{command}: Choose from the following:
TEXT Prints text horizontally.
(or T)
VTEXT Prints text (vertically) rotated 90
(or VT) degrees counterclockwise.
TEXT90 (Same as VTEXT above.)
(or T90)
TEXT180 Prints text (upside down) rotated
(or T180) 180 degrees counterclockwise.
TEXT270 Prints text (vertically) rotated 270
(or T270) degrees counterclockwise.
{font}: Name/number of the font.
{size}: Size identifier for the font.
{x}: Horizontal starting position.
{y}: Vertical starting position.
{data}: The text to be printed.
LINE Commands
Lines of any length, thickness, and angular orientation
can be drawn using the LINE command.
Format:
{command} {x0} {y0} {x1} {y1} {width}
where:
{command}: Choose from the following:
LINE Prints a line.
(or L)
{x0}: X-coordinate of the top-left corner.
{y0}: Y-coordinate of the top-left corner.
{x1}: X-coordinate of:
- top right corner for horizontal.
- bottom left corner for vertical.
{y1}: Y-coordinate of:
- top right corner for horizontal.
- bottom left corner for vertical.
{width}: Unit-width (or thickness) of the line.
<!> {offset} <200> <200> {height} {qty}
where:
<!>: Use '!' to begin a control session.
{offset}: The horizontal offset for the entire label.
This value causes all fields to be offset
horizontally by the specified number of
UNITS.
<200>: Horizontal resolution (in dots-per-inch).
<200>: Vertical resolution (in dots-per-inch).
{height}: The maximum height of the label.
The maximum label height is calculated by measuring
from the bottom of the first black bar (or
label gap) to the top of the next black bar (or label
gap). Then 1/16” [1.5mm] is subtracted from this
distance to obtain the maximum height. (In dots:
subtract 12 dots on 203 d.p.i printers; 18 dots on
306 d.p.i. printers)
{qty}: Quantity of labels to be printed.
Maximum = 1024.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

Crystal report printing problem in Malayalam

Hi,
I have a printing problem in Malayalam in crystal report.The viewer displays the correct font but the printed output displays the square boxes.I have installed the font.I am using Visual studio 2010 and crystal report 13.0 version.what could be the problem???
please help me...!!!

Hi priyashekar,
I’m afraid that it is not the correct forum about this issue, since this forum is to discuss Visual C#. You can post your question in the
Crystal report forum: http://scn.sap.com/community/crystal-reports-for-visual-studio/content?filterID=content~objecttype~objecttype[thread]
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Hp 4015: Printing problem on A5 LABEL

Similar Messages

Maybe you are looking for