HP 4120 Phone - What is the USB on the side of the phone used for?

HP 4120 Phone - What is the USB on the side of the phone used for? I have searched everywhere for documents on it.

Hi,
If you sign in IP Phone by using a USB cable, you will get simplified sign in and full access to the phone’s Lync Phone Edition features and full functionality. And you can control IP Phone from Lync client.
If you sign in using PIN, then you will get limited access to voice mail, calendar, and call logs, as well as some reduced functionality.
More details:
https://support.office.com/en-nz/article/Sign-in-on-your-IP-desk-phone-50d67e5c-8a51-4f1a-80c4-a78e67be10c9
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Similar Messages

Why does only the USB cable that came with my phon...

I recently acquired a Nokia Lumia Icon from Verizon. I have a Lenovo Yoga Pro 2 computer running Windows 8.1 with the Windows Phone App for Desktop (WPA4D) installed. I had a very difficult time getting my Icon to be seen by my computer when connecting it with one of the half dozen micro USB cables I have laying around. WPA4D would not recognize it. Then, I connected it using the USB cable that came with the phone, and WPA4D immediately recognized it. Then I unplugged it and went back to a different cable - it was again not recognized.
What is different about the USB cable that ships with the Nokia Lumia Icon? If I want to order more, like from Monoprice, what do I order to get the same thing? Why is Nokia (apparently) using some sort of proprietary cable??
Thanks,
Eric

It is not proprietary.The charging/data cable for my GPS works.
A lot of the cables are just for charging and that is all they are wired for and they don't even have the data pin. Full size USB cables are the same way.
If I needed an extra I would get it from Nokia.

When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone. This previously worked, but has randomly stopped working, help!

When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone. This previously worked, but has randomly stopped working. help!

I took my iPhone to the Service center of M/s RSG INFOTECH PRIVATE LIMITED on April 17, 2014.
Why are you posting in this forum about what occured with an independent service provider? How is is at all relevant to Apple?? In fact, service by any person or business not authorized by Apple voids any waranty.

I lost the USB cable that came with my phone (wt19i Live With Walkman)

I lost the USB cable that came with my phone (wt19i Live With Walkman). However, the charging power adapter still here.
I don't have any other cable.
My phone's USB port use Micro-B connector.
If I buy a high quality USB cable with Micro-B connector, will it be compatible for both charging and data transfer?
Is it necessary to buy the original Sony Ericsson USB cable? If yes, which model should I buy?

http://www.sonymobile.com/gb/support/contact-us/
Contact them and they should be able to help you
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

HT201210 if i dont want to restore my iphone,how do i get rid of the usb and itube sybol on my phone?

If i dont want to restore my ophone ,how do i get rid of the usb and itunes symbol on my phone?

Theres no way around it, you'll have to restore to have the phone working again.
http://support.apple.com/kb/HT1808
If your worried about losing your pics/videos, you can restore from backup once the restore is done.

I have a macbook pro4.1 and the sound chip in it failed. My speakers and microphone no longer work. Does anyone know of an external speaker and microphone set that plugs into the USB port so I can continue to use both of these functions?

I have a macbook pro4.1 and the sound chip in it failed. My speakers and microphone no longer work. Does anyone know of an external speaker and microphone set that plugs into the USB port so I can continue to use both of these functions and not have to pay to have the entire main board replaced. Preferably something under $100.

I don't think you're likely to find a set of external speakers that come with a microphone and plug directly into a USB port. There are USB audio cards that look like tiny flash drives but have microphone and headphone ports in them, to which you can connect a typical two-plug Windows PC headset with a microphone, or else you can connect external speakers and a stand-alone microphone. Those adapters typically cost under $10. I don't know anything about the quality of sound that can be expected from them.
I have a Griffin iMic, which is much the same idea but larger, a bit more expensive (retail~$40), and perhaps delivers somewhat better sound quality (I hope so, but I don't know because I've never had occasion to try one of the little ones).
http://www.google.com/products/catalog?oe=UTF-8&hl=en&client=safari&q=usb+sound+ card&um=1&ie=UTF-8&tbm=shop&cid=9618463009759678039&sa=X&ei=tgQoT5zYOMfZ0QHkiICw Ag&ved=0CHcQ8gIwAQ
http://compare.ebay.com/like/320779457703?var=lv&ltyp=AllFixedPriceItemTypes&var =sbar

I installed iousb family log release osx 10.5.6 and installed on my mac osx 10.5.8. I am trying to log and rfid reader on the usb. Sadly on restart the usb is no longer working. Happily Windows is still running OK. Is there a way 2 get my usb back?

I installed IOUSB family log release osx 10.5.6 on my mac osx 10.5.8. I am trying to log an rfid reader on the usb. Sadly on restart the usb is no longer working. Happily Windows is still running OK. Is there a way to get my usb back working? And is there a way to navigate in Windows to the file I installed and remove it? Any help appreciated.

BDAqua wrote: Does OSX boot at all, or not?
Yes, it does. Right to where I am supposed to log in, but since the USB is not working (either mouse or keyboard), I'm stuck. I have to shut down and restart and boot into windows.

Becouse of expire of credit card I updated billing information by providing data of new credit card but system just says "We're sorry, the billing information on file could not be used for this payment. Please update your information.". What exactly is wr

Becouse of expire of credit card I updated billing information by providing data of new credit card but system just says "We're sorry, the billing information on file could not be used for this payment. Please update your information.". What exactly is wrong?

Are you 100% sure that every detail of your information is the same in each place?
Make sure that EVERY DETAIL is the same in every place you enter your information
-right down to how you spell and punctuate the parts of your name and address
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-Credit card https://helpx.adobe.com/utilities/credit-card.html

I have an email account causes the machine to hang up after being in use for a day. It only occurs on my Macbook Pro and only one particular account. The problem account works fine on my iMac and Windows Machines. Any ideas what is causing this?

I have an email account causes the machine to hang up after being in use for a day. It only occurs on my Macbook Pro and only one particular account. The problem account works fine on my iMac and Windows Machines. I have been to the local Genius bar and through trial and error we have determined that Mail is working ok but somehow the account is causing the problem. I have used this account for years. Any ideas what is causing this?

No idea why, but one thing you may try if you have the time, is create a new user, and set up the problem mail account in the new user space. See if it causes your MBP to hang as well. That will tell you if it is something wrong with your main User, or something wrong with MBP.
Assuming this works, I'd nuke the problem account in your main user space, re-start, and reinititate the account and see if that helps.
Depening on how many email accounts you have setup, it may be necessary to nuke the whole Mail folder in your User/Library.... Hard way to get it to work, but just my idea.

I bought a camera connection kit. First time it worked fine, using the USB connector, but now neither the USB or SD connector works. The iPad shows a connector is attached, but Photos doesn't open. Any ideas? thanks

I bought a camera connection kit. First time it worked fine, using the USB connector, but now neither the USB nor SD connector works. The iPad shows a connector is attached, but Photos doesn't open. Any ideas? thanks

If you have not done so, try exiting the Photo app (and maybe more apps if you have a lot open) from the Open Apps List and see if a discount/reconnect opens the app. If that does not work, try powering down the iPad and test. If it is still not working try a hard reset by pressing both Home and Sleep/Wake buttons at the same time until the Apple graphic appears, ignoring the Slide to Power Off button.

I have all my music on my old computer but the port broke on the old computer and i want to put my music on my new computer but the usb port is broken on the old computer

i have all my music on my old computer but the port broke on the old computer and i want to put my music on my new computer but the usb port is broken on the old computer

See:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

Why does the usb printer go offline through the airport extreme?

My hp 2500n printer is listed as not connected. I have it hooked up to myAirport Extreme via usb. If I disconnect and reconnect the usb, it sees it and all is well as long as the printer is never turned off. If the printer power is cycled, the usb connection is lost and the only way I have found to reestablish the connection is by manually disconnecting and reconnecting the usb cable. There are no intervening devices between the printer and the usb connection on the Airport Extreme
Any ideas out there?

I had the exact same problem
It turns out I was using a 20 foot USB cable between the printer and the Airport Extreme and the signal had become to weak to work. Try using nothing more than a 6 foot cable or try a new cable

Where can I find a mapping of the Mac Powerbook version number (e.g., 3.1) to the dates (e.g., "late 2007") that Apple uses for indicating compatibilty with OS upgrades?

Where can I find a mapping of the Mac Powerbook version number (e.g., 3.1) to the dates (e.g., "late 2007") that Apple uses for indicating compatibilty with OS upgrades?

There were no PowerBooks made in 2007. By then Apple had switched over to Intel and they were making MacBook instead.
If the MacBook is what you really want try http://en.wikipedia.org/wiki/MacBook
Allan

How does the backup file that I would like to use for restore now require a password

How does the backup file that I would like to use for restore now require a password, when I just Backed it up on 10/30/14

It requires a password to restore from it because at some point, you checked the box in iTunes to use encrypted backups, at which point you were prompted for, and set a password.
If you now can't remember what that was, then you can not restore from that backup.

When i log into icloud on my laptop,there is an error displayed? im using the same apple id and password that i use for itunes...helppp

even do i use the same apple id and password that i use for itunes.

Hi peacegraffiti,
Thank you for using Apple Support Communities.
I understand you are having difficulties restoring your new iPhone from a previous iCloud backup. The following article provides information to help restore from an iCloud backup.
Get help restoring from an iCloud backup - Apple Support
Cheers,
Jeff D.

My Windows 7 Professional desktop system hard disk got corrupted and I took the opportunity to install an SSD for a new system disk and reinstall Windows. The system is up and running on the SSD, with my old system disk now used for storage as it is stil

My Windows 7 Professional desktop system hard disk got corrupted and I took the opportunity to install an SSD for a new system disk and reinstall Windows. The system is up and running on the SSD, with my old system disk now used for storage as it is still readable. The only Adobe product I have reinstalled so far is Reader XI but I would like to reinstall Elements 8 and Acrobat 9 without taking up more licences as both are also installed on my laptop. Can you point me to the best way to do this? - Thanks

If you have the two allotted activations already and one was lost on the hard drive that failed then you need to contact Adobe Support thru chat and ask them to reset your activations.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

HP 4120 Phone - What is the USB on the side of the phone used for?

Similar Messages

Maybe you are looking for