HP 4385 all in one returns message "This device not configured for networking"

This happens just after the point in the install when I have attached USB and wireless data seemingly has been transferred to the Printer.  This all started when I needed to do a re-install after a Vista upgrade.
I did reset the printer  to Factory settings. I am using latest install software from HP Site. I have tried to resolve this with HP CHAT with no luck.  Obviously I have tried this install several times now I even tried it with the printer within inches of my router.
Help Please

Print a Wireless Test from the front of the printer.  It will self-test the components of the printer, including its radio.
1. Press the Wireless button on the front of the HP All-in-One.
2. Press the button next to the icon on the display until Wireless Network Test is highlighted, and then press the button next to OK. The Wireless Network Test prints.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • Upgraded to Yosemite,  Created new apple ID as couldn't remember last one now can't update iPhoto receive message this update not available for this apple Id either because it was bought by a different user or item refunded or cancelled.

    upgraded to Yosemite and now can't update Iphoto or Imovies receiving message this update not available for this apple ID because it was bought by a different user or item refunded or cancelled.  Is there an easy fix

    Unfortunately, anything obtained at the app store remains tied to the Apple ID used to obtain it forever. You will either have to start over with your new ID or try to recover the original ID.
    Frequently asked questions about Apple ID

  • How can I get my stereo to play music videos from my Ipod Nano?  It comes up with the message "This device not supported".  Strangely my Iphone IS recognised.  The stereo, Ipod, and Iphone are less than 4 months old. Any suggestions welcome!

    How do I get my Ipod to play music videos through my theatre system?  I keep getting the message "This device not supported".  My theatre system WILL recognise my Iphone however.  The theatre system, Ipod, and Iphone are all less than 4 months old.  Any suggestions welcome!

    Check with the theater system vendor and see if their system is compatible with the Nano. The resolution on the Nano may be too low for the system.

  • IPhone 4 will not charge using apple charger displays this device not supported for charging

    The iphone will connect to iTunes but will not charge with the charger or computer. It has been reset, and that didn't help.

    Hey endifrommiami,
    Check out the website link on my profile and then navigate to the products section of the site, there are solutions to fixing your specific charging iPhone problem there.
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'
    Fonefixer.

  • This Certificate not valid for the selected purpose

    I have installed on my Windows 7 (64 bit Professional w/SP1)
    a Self-Signed CA (IDS_MstrCert)  that has been accepted by the system certificate "store".  via mmc & certmgr
    I generated this CA on my Redhat Linux 7 server using the openssl utilities. 
    It shows: This certificate is intended for the following purpose(s):
    All issuance policies
    All application policies
    It is enabled for ALL purposes (However I did not generate with ALL purpose set)
    Under Certification Path:
    Certificate Status: This Certificate is OK
    I have also installed a Client Certificate (winxclient) (also generated by my Redhat Linux 7 server)
    That has been "signed" by my CA (IDS_MstrCert)
    I added it successfully to the system certificate "store" via mmc & certmgr.
    However when I open the certificate I see the following message: This Certificate not valid for the selected purpose
    When I view the Certificate path I see the following:
    IDS_CA                          (friendly name for the CA)
        |-----> VPNIKEv2cli     (friendly name for the client certificate)   
        Certificate Status: This certificate is OK
    In the Intended Purposes field: ServerAuthentication, ClientAuthentication
    How do I resolve this problem ?   This Certificate not valid for the selected purpose
    When I attempt my vpn/ikev2 connection (using machine certificates) I get the 13806 error.
    Best Regards
    Guy Rich

    Hi,
    In my opinion, this is not Windows system problem. You need to make troubleshoot with the Certificate.
    I made a research with this error message, the link below might be helpful:
    http://support.persits.com/show.asp?code=PS030304105
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Having problem deleting all but one particular mail from the iPhone 4S mail inbox. I can delete mail either by the trash can or using edit, selecting the mail message and deleting.  However there is this one mail message that will not go away. Any ideas?

    I am having a problem deleting all but one particular mail message from my inbox. I delete by either using the trash can icon for individual mail, or using edit, selecting the mail message (s) and clicking delete.  However there is this one mail message that will not go away regardles of what I do including deleting all from the trash.  Any ideas?

    I get that every once in a while on my 3GS, and that's what I do to get rid of it. Probably not a bad idea to power down the phone every so often, anyway, gets rid of any crud waiting to cause a bug.
    Glad to hear that it worked for you.

  • I have 5 devices all on one itune account.i have not activated icloud because i dont want it to sync all our information together. is there a way to set it up to only sync the music together and not the contacts photos messages etc

    i have 5 devices all on one itune account.i have not activated icloud because i dont want it to sync all our information together. is there a way to set it up to only sync the music together and not the contacts photos messages etc

    Unless you subscribe to iTunes Match, iCloud doesn't sync music.  Just set up every person's devices on a separate iCloud account and your iCloud data and photo stream will remain separated.  Each iCloud account will need a separate ID, but it does not need to be the same as your iTunes ID.  You can continue to share the same iTunes ID and maintain separate iCloud accounts with separate IDs for iCloud.
    You'll also want to use separate IDs for each person for iMessage and FaceTime.  This will keep your text messages and FaceTime called separated as well.  The easiest way to do this is to have everyone use their iCloud ID for these two services as well.

  • One TV keeps getting message this channel not available

    OK so one TV an older one, in my home keeps getting the message this channel not available.  I went through ll the trouble shooting steps.  My other two TVs are fine but they are new one's.  This is my grandpas' old one.

    I'm sure it happens to many channels from time to time, because that is what happens to me.  On the DVR or on the HD STB.  Tonight I sat down to watch the Yankees play the Phillies on ESPN.  My 2 favorite teams, very excited.  At first ESPN doesn't load, then I get the BSOD w/ the white letters in the middle of the screen telling me the channel is unavailable.  It provides me w/ 2 options.  Option 1 is to switch away from this channel and back again (didn't work).  Option 2 is to call the toll free number, input a code and everything will be fine. 
    So I called the toll free number, entered the codes as prompted, and listened to the robot lady while she reset my DVR.  She told me to look for the yellow light to the left of the display after the reset and if the yellow light wasn't there, to turn on the DVR using the power button on the DVR.  I did not see the yellow light, so I turned the power on as instructed by the robot lady.  However, still no yellow light.  The robot lady is only prompting me to say next, repeat the instructions for the #%&^*(*&%@!!!#%$^ yellow light, or say problem fixed.  When I took her up on her offer of more info, she simply repeated the thing about the yellow light.
    How about adding a prompt to her repertoire asking if the yellow light isn't there.... I guarantee this will be the most used prompt.
    Meanwhile, I am too experienced and sane to call for tech support, live chat is always unavailable, so I am left waiting for some verizon kool-aid-drinking "guru" to tell me my coax is bad in the forums.
    Good night.

  • Every device (iphone4, iphone4s, ipad2) I try to hook up to iTunes gives me a message "this device cannot connect because the apple mobile device service is not setup" does anyone have ideas as to why it keeps popping up? It just started doing this.

    Every device (iphone4, iphone4s, ipad2) I try to hook up to iTunes gives me a message "this device cannot connect because the apple mobile device service is not setup" does anyone have ideas as to why it keeps popping up? It just started doing this.

    I'd start with the following document with that one:
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • I had Adobe Acrobat Serial loaded before The hard drive crashed on my old PC.  I have tried to download Acrobat 9 on my new PC, but always get the message "This is not a valid serial number".  I had Adobe 9 Standard on the old.  But what downloads from th

    I had Adobe Acrobat Serial loaded before the hard drive crashed on my old PC.  I have tried to download Acrobat 9 on my new PC, but always get the message “This is not a valid serial number”.
    I had Adobe 9 Standard on the old.  But what downloads from the page http://helpx.adobe.com/acrobat/kb/acrobat-8-9-product-downloads.html is Adobe 9 Pro.  Perhaps this Pro version is the problem. 
    Anyway, can you point me to a way to install Adobe on my new PC?

    You can try Download Adobe CS5 Free Trials – All Direct Links without Akamai | ProDesignTools.

  • When trying to access one website, Firefox says " This domain is not configured for this service. Please add it to your account."

    I am trying to access a fabric website I have used before and when I try to type in the domain name, a message appears saying "This domain is not configured for this service. Please add it to your account". How do I fix this?

    That message sounds like an address might have changed on the server...
    Are you trying to access the site directly using a bookmarks, or by typing into the address bar, or by following a link in a search engine? Sometimes links change making bookmarks and search engine entries obsolete, or Firefox's autofill feature suggests an address that no longer works, so if one approach doesn't work, you might try one of the others.

  • Error Message "This is not a Test User account - Please create a new account in the Sandbox Environment

    hello ,,
    i have this problem many times why i don't know and i dont have jealbreak " Cydia " ok
    the messageis is :
    Error Message "This is not a Test User account - Please create a new account in the Sandbox Environment"
    how to solve this problem any helpful answer please ?
    thank you

    The ultimate solution after you have tried restarting/ rebooting your device (no need to hard reset or restore your device) is:
    Click iForgot, then reset your password, change it to your new password. Then go to Store, try downloading any app! Hope this will help because some of my friends had this prob before and all what i did was this way!

  • When I try to install Maverick on the HD I get this message: This disc is used for Time Machine backups.

    When I try to install Maverick on the HD I get this message: This disc is used for Time Machine backups and then nothing happens!

    Try looking in Finder at your Macintosh HD.   Look to see if there is a backups.backupsdb folder at the root of the hard drive.  That's a folder that Time Machine makes on external hard drives to store the backups.   If you have one there, some one put it there; rename the folder or delete it.  Then try installing again.

  • In IPhoto '08, Photos under Library, I'm no longer able to view a screen of thumbnails.   I'm only able to view a single photo at one time.  This was not true in the past.

    In IPhoto '08, in Library/Photos, I'm no longer able to view a screen of thumbnails.   I'm only able to view a single photo at one time.  This was not true in the past.

    Note the slider lower right of the iPhoto Window. Drag it left.
    Regards
    TD

  • I am trying to download pictures from my canon rebel  eos to my Ipad but i get the message "this device is not supported" what can I do ?

    I just bought an Apple Lighting to USB Camera Adapter. When I got home to and connected it to my Canon Rebel EOS Digital Camera. I received the error message "This device is not supported" I was wondering if there is any software or drivers I need to download?
    Thanks
    Don

    I use Canon Cameras and have no problems downloading photos from the camera to the Lightning to USB Camera Adapter. My questions and suggestions might be basic but just to make sure:
    1. This is an iPad forum area. Are you using the lightning to USB camera adapter with an iPad? Your info in your original post says iPod. I'm not sure that the adapter works with an iPod.
    2. After you connect the adapter to your iPad and then use a USB cable to connect the adapter to the camera did you turn on the camera?
    3. If you did turn on the camera and still did not get the import of photos to start try a reset your iPad. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. This will not cause any data loss.

Maybe you are looking for