HP 4450 Tray 1 Drawer Stuck. Cannot pull out.

I have managed to remove the front cover of the drawer and removed the handle connecting bar. The left hand lever moves well but the right hand lever hardly moves at all. What do I need to do to be able to release thr Drawer and remove paper? Thanks everyone.

Also, just to clarify, by tray 1, I mean the manual feed, not the default tray.

Similar Messages

PAPER TRAY SUCKS. CANNOT PRINT OUT PHOTOS, TRAY ONLY ACCEPTS PAPER FROM BOTTOM TRAY. GRRRR.

My BRAND NEW (One week from delivery) no longer prints out photos. It printed out photos several times but 3 days' ago it stopped.
The paper tray is malfunctioning. Each time I try to print out a photo (remember, it's been done several times until a few days' ago) THE TRAY WILL NOT ACCEPT PAPER FROM THE TOP TRAY!!
SELECTED PHOTOS PRINT OUT ON PAPER FROM BOTTOM TRAY ONLY!! MY INK AND PAPER IS BEING WASTED AND SEVERAL OTHER POSTERS ARE EXPERIENCING THE SAME ISSUES WITH THE HP 6520!
Is one of those infamous 2-hr. long marathon phone calls to Tech Support in India the ONLY way one can sensibly have an HP issue resolved?
This is ridiculous!

Hi,
Sorry to hear you are having problems printing. What device are you using to print?
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Full page pull out tray, pull only object workaround

Hi,
Is there any way yet, when creating a pull out tray/slider using the scrollable frame, to only have a object within the container pull the content, rather then being able to pull from anywhere within the container?
Basically what I am trying to do is have a pull out that when pulled out, covers the entire page, therefore the container needs to cover the entire page which disables the ability to navigate horizontally between articles, I can still navigate vertically, but not horizontally..
Does anyone know of a workaround that would enable me to have a full page pull out (container) and still be able to navigate horizontally. i.e. having only an object (the pull tab) pull the content rather then anywhere within the container.
Thanks for you help
Quinn

Thanks everyone for your help, however I am yet to solve this problem...
On top of the horizontally scrolling content I have created a MSO consisting of two invisible rectangle frames. Tried to see if it would work as just a MSO, nothing, turned those into a one time Auto Play Slideshow, still nothing. No matter where I pull, the content still scrolls yet I can not navigate horizontally to the next article. (Made sure I left space for the tab area, yet I can still pull from anywhere). Any other solutions/workarounds to this problem? Or if this has worked for others, possibly tell me if I am doing something incorrectly?
Thanks again for your help.
Quinn
PS. I am using V20 on ID 5.5

HOW TO PULL OUT THE PAPER TRAY ON ENVY e4500

I HAVE JUST BOUGHT HP ENVY 4500 e ALL IN ONE, I AM HAVING TROUBLE FINDING OUT HOW TO PULL OUT THE PAPER TRAY.
This question was solved.
View Solution.

To pull it out to load paper, you first flip down open the front door (which is connected to the paper tray and serves as the output tray), then grab on the door and pull.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

Pull out tray reset

I'd like to use a pull out tray for a navigation item. The user would slide out the tray, tap a button in the tray, and it would take them to another article or page.
The trouble is, once they navigate away from the first page, that tray remains in the "open" position. If they return to the first page, the tray is already open from the last time they were there.
Is there a way to make the tray snap "closed" (the original state) once they tap the button?

Make that first page a single article. All interactivity will reset when you go back to it.
You could also try to use an MSO instead and have the button navto and go to the closed state.
Bob

I am stuck in the big screen and cannot get out.

I hover the mouse at the top but the menu will not appear. The only way to solve this is turn off the computer. Surely there is a better way. What am I doing wrong?

I hover the mouse at the top
The top of what?
but the menu will not appear
What menu?
The only way to solve this is turn off the computer
Solve what? What iMac do you have have? What operating system?
What EXACTLY is the problem you are having?
I am stuck in the big screen and cannot get out.
Are you simply trying to reduce the size of the window? Justy click the green button.

Multiple tabs,sliders or pull-out trays in DPS

Hello!
How can I have multiple pull-out tabs in DPS on the same page.
My screen shots show the tabs on the right and then the last tab pulled out. But it seems that this tab stops all the functionality of the other tabs, i.e. they dont pull out.
Has anyone got a bright idea for a dull day, to make the other tabs work?
Thanks.

Hi Bob,
I seem to be having a similar problem. Could you be more specific about the MSO approach, please?
Thank-you kindly.

I accidentally clicked restart with windows vista.now i cannot get out of it. i cannot eject the disc and i am stuck on the installation page

I accidentally clicked restart with windows vista. now i cannot get out of the installation page and no matter what i try i cannot get it to start up with macintosh. i cannot ejet the disc either.

i was going to say the exact same thing as jerry. You can also eject the disk in that mode if you want. It also works if you hold down the option key before you turn it on- just so you dont miss the moment. What I say to do is power off, hold down the option key, while holding it down, power on. When a menu pops up, you can let go of the button. Once in the mode, select with the mouse your mac os hard drive/ boobable and then click enter or click the arrow on it. Then your fine!

I Cannot Figure Out How To Create A Signature Spot! Help Please!

Hi,
I'm not very good at all this stuff. Long story short I have a contract drawn up that I need to use for doing business with my customers. At the bottom I want to leave a box where they simply click when they're reading the PDF, and it allows them to draw in a signature.
I first encountered this kind of thing on a W2 form, and it was so easy it worked without even pulling me off the browser.
I have Acrobat Pro 10.1.1, but I simply cannot figure out how to do this.
If anyone has the time, step-by-step instructions that a 6-year-old could follow is probably necessary with this.
It would be so much appreciated.
Thank you.
-Robert

It's possible that the W2 you used was set up with the EchoSign service. It allows you to draw a signature with a mouse. This is available as well with more recent versions of Reader (10.1+) if the form isn't Reader-enabled or secured. You will see this in the Sign panel when the document is opened in Reader.
You can otherwise get an EchoSign account and upload your document and send it to your customers through the EchoSign service. You can establish a free account to see how it works.

I have a brand new macbook pro that i was doing a data transfer from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again?

i have a brand new macbook pro that i was doing a data transfer via firewire from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again? (this time il use time machine transfer)

Just power off the machine(s). Shut them down. Migration Assistant gets 'stuck' sometimes - best way to migrate really isn't over Firewire, though it will certainly work, but with both machines hardwired via Ethernet to the same router. You can use a TM backup, too, of course, provided that it's recent. Which is the best? Your choice. I've done it both ways and have a preference for MA, but TM restore can be a bit faster and less quarrelsome.
Clinton

Pull out tab pan and zoom option grayed out

I've been trying to follow this great tutorial about pull out tabs, but have one issue. I've just updated InDesign 5.5 Folio Builder to v.22 and the producer tools to the most recent release on August 7. Here is what I've been doing.
Create an unassigned box for the tab. Create an unassigned box for background. Create a text box and add text.
Group all of them together.
Create an image box (container frame) that is larger than my grouped content and paste the grouped content into it.
When I select the image box (container frame) and select Pan and Zoom, all options are greyed out.
If I clear the content from the image box and put a photo in it, I can use the Pan and Zoom options.
Any ideas on what I'm doing incorrectly? Thanks!
Tutorial I'm following.
http://tv.adobe.com/watch/digital-publishing/pull-out-sliders-and-trays/

Thanks, for the record, I updated my steps to show the correct process.
Create an unassigned box for the tab. Create an unassigned box for background. Create a text box and add text. Create an unassigned box at the top left to "hold" the tab position to the right side of your document.
Group all of them together.
Create an image box (container frame) that is larger than the grouped content and paste the grouped content into it.
Select the image box (container frame) and choose Scrollable Frame with the options - Horizontal, check Hide for Scroll Indicators, and select Upper Left for Initial Content Position.
Thanks again Bob!

Pull-out tab and swipe: conflict

hello everybody
When you're on article X, How can you swipe horizontally to the next article Y when you have a pull out tab that take the WHOLE page X ?
I'm stuck in navigation !

Hi Seb
I'm afraid you can't! its a bad limitation at the moment.
Answer re-design the pullout.
But just to let you know, the enterprise guys have the ability to create a "fake invisible" hot spot area that sits above the pull out that does allow the user to then swipe to navigate away from the page. Don't actually very fair. If I have that wrong, could some one please correct me :-)
Cheers
Alistair

Table cannot be outer joined

hi
i have this query
SELECT xoj.entry_date job_date, xoj.well, xoj.rig, xoj.job_type,
       xoj.job || xoj.job_type job_descritpion, xoj.opn_job_desc,
       lab2.well_depth, fvl.attribute1, xoj.contract, xoj.invoice_date,
       xoj.invoice_ref,
       SUM (rad.amount) OVER (PARTITION BY xoj.opn_job_desc) invoice_amt,
       SUM (npar_get_invoice_balance (ra.customer_trx_id, '31-Aug-2013')
           ) OVER (PARTITION BY xoj.opn_job_desc) pending_bal_due,
       SUM (NVL (app.amount_applied, app.amount_applied_from)
           ) OVER (PARTITION BY xoj.invoice_ref) amount_paid_correct
FROM xxnp_opn_joblog_001 xoj,
       napesco_well_stage_lab lab2,
       fnd_flex_values_vl fvl,
       ra_customer_trx_all ra,
       ra_cust_trx_line_gl_dist_all rad,
       ar_receivable_applications_all app,
       ar_payment_schedules_all ps_inv,
       ar_cash_receipts_all ar
WHERE xoj.opn_job_desc(+) = ra.attribute1
   AND rad.customer_trx_id = ra.customer_trx_id
   AND xoj.rig(+) = fvl.flex_value --this is the problem : a table cannot be outer joined to more than one
   AND xoj.opn_job_id = lab2.job_id
   AND xoj.invoice_ref = '2012-1575'
   AND rad.account_class = 'REC'
   AND rad.latest_rec_flag = 'Y'
   AND app.applied_payment_schedule_id = ps_inv.payment_schedule_id
   AND app.cash_receipt_id = ar.cash_receipt_id
   AND app.display = 'Y'
   AND ra.customer_trx_id = ps_inv.customer_trx_idi would like to include AND xoj.rig(+) = fvl.flex_value also in the query
kindly guide
thanking in advance
Edited by: makdutakdu on Apr 8, 2013 1:47 PM
Edited by: makdutakdu on Apr 8, 2013 1:48 PM

Sir ,i am not able to figure out why
SELECT *
FROM fnd_flex_values_vl fvl, xxnp_opn_joblog_001 xoj
WHERE
   xoj.rig = fvl.flex_value
returns no value
whereas xoj.rig(+) =fvl.flex_value does return data ---as this returned data ,i would like to add it in my main query then again datatype of rig is char and flex_value is varchar2 .is tht the problem
and again xoj.rig=fvl.flex_value(+) does not return any datai know everyone in the forum is busy but i am just exploring new areas in oracle at my workplace with the tasks i am given ,which is why i post questions here when i am really stuck or ignorant
kindly guide
thanking in advance
Edited by: makdutakdu on Apr 8, 2013 3:24 PM

TS3212 ITunes worked fine on my Windows 7 machine. Had to rebuild the machine but all the data remains. Downloaded a new version of iTunes and cannot figure out how to load all of my music currently on my hard drive. Tried moving Library file. Did not

ITunes worked fine on my Windows 7 machine. Had to rebuild the machine but all the data remains. Downloaded a new version of iTunes and cannot figure out how to load all of my music currently on my hard drive. Tried moving "iTunes Library" file. Did not work. Never had trouble like this before.

Many thanks for your post. I've been trying for days to get this sorted and was getting well fed up with I-Tunes. Really thought i'd never get it working again. Tried un-installing it, loading older versions and they still wouldn't work.
Came across your suggestion by chance and top man - it worked..!!!!
How you even knew what to do is beyond me - but thanks so much. I really was pulling my hair out.
You need to put your post over the Web as there seem to be loads of people having the same trouble.
Thanks again.

It sounds stupid but I cannot figure out how to create a TOC

It sounds stupid but I cannot figure out how to create a TOC

You'll find some good video tutorials with these Google searches:
(search Google for these terms without quotes)
* indesign paragraph styles tutorial
* indesign table of contents tutorial
* InDesign paragraph styles in table of contents tutorial
The simple principle is: InDesign creates a TOC by "pulling out" heading paragraphs from your document. To help it know which paragraphs are the headings you want in the TOC, you need to create paragraph styles, and apply them to the heading paragraphs. Then, when you perform Layout > Table of Contents, you choose the heading paragraph styles, and run the process.
It may be daunting if you've never done anything like this. But, if you've done it in MS Word or other word processor, the principle is the same - make the headings identifiable in some way, so the software can extract them.
Look at the video tutorials, create a heading paragraph style, create a TOC, and let us know the result.
If your document is one of several that are gathered into an InDesign book, search Google for terms like "working with InDesign books tutorial," and "InDesign book table of contents tutorial," without quotes.
It would help if you can provide screen shots of your result. Search Google for terms like "how to create a screen shot on mac," or "how to create a screen sot on windows," without quotes. It also helps to display hidden characters when you make the screen shots. Search Google for terms like "how to display InDesign hidden characters," without quotes. Search Google for terms like "how to post a screen shot on an adobe user forum," without quotes.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

HP 4450 Tray 1 Drawer Stuck. Cannot pull out.

Similar Messages

Maybe you are looking for