HP 4500 All in One Printer

Is HP 4500 All in One Model SNPRC-0902-01 wireless, i.e., does it have wireless capability. It is presently connected to my Windows 7 computer with a USB cable.
This question was solved.
View Solution.

Well hang on... we're not done yet. You can make it wireless for about $21 bucks.
Connect wireless printer anywhere, convert from wired, bypass failed radio, add WPA2 security.
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Connect-your-wireless-printer-when-away...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

HP Officejet 4500 All-in-One Printer - G510g installation windows 8.1 64bit

After operating a HP Officejet 4500 All-in-One Printer - G510g from both an old Windows XP notebook and from an ASUS Windows 8, 64bit laptop, subsequently updated to 8.1; I'm now trying to install it to run from a Toshiba Satellite NB10T-A notebook Windows 8.1 64bit, but without success.
The original installation CD does not provide an installation but on start up (presumably because it is only compatible with Windows XP and 7.
The www.hp.com site offers a download of a full driver for the printer, forWindows 8.162bit. This seems to download fine. The file unpacks, says it is installing, but on completion the driver is not available.
There are no options to uninstall, either in control panel/printers or in control panel/software.
Without the driver, the Windows 8.1 system recognises the printer and allows simple printing ffrom applications. However, it is not possible to use the scan options, giving the error message that the driver is not available. Neither HP Solution Center or HP Document Manager are installed.
I have tried HP Print and Scan Doctor. This recognises the printer on USB link, says that there are missing drivers, downloads, unpacks and installs drivers. But the printer icon in control panel/printers continues to have an alarm icon and indicates that the printer is still missing drivers.
I have also tried the HP Printer Installation Wizard. The result is similar.
Please advise how I can install the scan options of this equipment and confirm that the machine is compatible with windows 8.1 64bit.
Thank you
This question was solved.
View Solution.

Hello @monc , welcome to the HP forums!
I read through your post about how you cannot scan on your Windows 8.1 computer as the driver and software doesn't seem to be completing successfully on your system. However, you have been able to install the printer and its functioning fine on other computers.
I would suggest checking the Control Panel to see if there are any printer files to uninstall: Uninstalling the Printer Software
Restart the PC afterwards
Perform a Clean Boot
Restart the PC again
Download and install the printer again: HP Officejet Full Feature Software and Driver
If you see any error messages or codes during the installation process, make note of the exact problem or error and post me back a screen shot or the details.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Envy 4500 All in One - Printer Error - not finishing print job / non-specific error code

Help - my new HP ENVY 4500 AIO (less 3 months old) has never completed a print job if it is over 1 page. I'm connected wirelessly, and not sure if there is an interruption in the wireless connection or if this is defect in the printer. I receive a message "Printer Error - HP ENVY cancelling print job" and that's it. It will usually happen when it's on the last page of a small print job or half way thru a large (10+ page) of a print job. Any suggestions? I've downloaded HP Print/Scan Dr - it didn't find any issues.

I had the same issue. Got in contact with HP customer service and the first person that helped had no idea how to fix it. Got in contact with someone else and they found the issue right away. I had it connected through the wrong port.
First find out what the IP address of your printer is. You can do this by pressing the small wifi button on the front of your printer and it will show the IP address.
Then what you'll have to do is go to the start menu of your computer and search for "Devices and Printers".
Click that and a screen will open. Look for your printer an right click.
Click "Printer Properties" and a new screen will open.
Along the top you will see a few tabs. Click the one that says "Ports"
Click "Add Port"
Highlight "Standard TCP/IP Port" by clicking on it, then click "New Port"
A new screen will open.
Click "Next"
Type in the IP Address of your printer and click "Next"
After that your computer should find your printer.
Click finish and you should be all set.
Hope this helps.

My Wireless HP ENVY 4500 All-In-One Printer Has Stopped Printing PDF Files

I installed the subject wirelessly printer about 1 years ago. It works quite well with my iMac OS X10.9.1 desktop and my Win7 laptop PC. But, it recently stopped printing PDF files for no apparent reason, and I get no error messages.
It won't print PDFs from my browsers nor from Adobe Reader (11.0.07) ... but all other document file types print OK from my browsers and Reader.
The only thing that comes close to printing PDFs is that sometimes, when I try to print a PDF page or file from within Adobe Reader, it prints - on a single sheet - 6 tiny duplicate sections of what appears to be the upper right-hand quadrant only of the original PDF document.
Please note that I un-installed and re-installed the printer and its driver twice without success. Also, no amount of printer re-configuring of layout, size, etc. made a difference. I received some previous work-around advice about converting the PDFs to a Word document, and printing that. But this is just not convenient; and besides, the printer is suppose to print PDFs (PDF is my document of choice for basically all my collaborative work). I should also state that I received no help with this problem from the HP ENVY user group forum; so, I guess that means you may be my last resort. And finally, I don't know if this is relevant or not, but I upgraded my iMac from Snow Leopard (OS X 10.6) to Mavericks (OS X 10.9) a few months ago - this upgrade was frought with all sorts of teething problems! - and I am now somewhat suspicious that something in the upgrade might have something to do with my current PDF problem.
Could someone please advise me on any Adobe Reader and/or printer re-configs, re-sets or other actions I should try?
Thanks

Correction to initial post: The 6 tiny sections incorrectly printed on a single sheet are actually from the bottom right-hand quadrant of the original PDF page - NOT the upper right-hand quadrant.

HP 4500 All-in-One Printer/Scanner

I have a HP 4500 Scan/Printer. Since updating to OS Mavericks, my scanner hasn't worked. Does anyone have a solution to this problem?

Thanks for the work around. It worked. But It's ashame when you have to develop a work around for the latest and greatest operating system. Maybe that's why it was free.

Why wont' my Iphone 4 print to hp 4500 all in one?

I downloaded the Hp home&biz app to print to HP 4500 All in one printer.
I can print from Ipad, Itouch and MacBook Pro but not from Iphone 4.?????
I have tried everything.
Thanks.

Hello dobis11011,
You have verified a lot of common factors that can interfere with the printing method that you want to use.
I would also try some additional steps, you can try to print after each step to isolate the causing factor:
Verify Bluetooth is off (preferred setting).
Power your iPhone off and then on.
Press the home button twice and end the HP ePrint Home & Biz app from the multitasking section.
Delete the app and re-download it from the Apple App Store, as it is a free app.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

HP Envy 4500 all in one wont scan or copy

Hi all. I have a 4 month old Envy 4500 all in one printer & it has stopped scanning &/or copying.
It wil print from any of the laptops on the network but will not scan a document or copy either from the desktop icon or directly from the panel on the printer.
I've tried everything, uninstalling & re installing from CD rom, I've run the Scan & copy driver doctor & that says there's a problem with the driver, tells me to unplug the pirnter & restart computer, done all that & still nothing.
When you try to scan the printer draws the paper in & then the screen just sits for hours with the progress bar on "scanning" or "copying" & nothing happens. If you cancel the job (on pc or printer panel) even the "cancelling" sticks on the screen for hours, the only way to clear it is to shut down printer & restart, but still it doesnt fix it.
I think there's a fault with the arm thing that moves across the screen & copies/scans the document on the glass.
Its under warranty but I've tried everything for 3-4 days now & getting nowhere
Someone please help
BTW. My wife laptop was on windows 8.1 & I was on Windows Vista but I have just changed to new laptop in last 24hrs with also Windows 8.1 but the problem started well before I changed my laptop from Vista AND exactly the same symptoms happen from my wifes pc with Windows 8.1.

Ok thanks for all of this. I tried it all & still no joy.
I do think (as I have all along that it is a hardware fault)
I will speak to Amazon as I cannot afford to be without a printer whilst it goes off for repair
UPDATE: Amazon customer service is UNBELIEVABLE!! They're just sending a new printer out & once I get it I just need to send old one back. Love Amazon!

HP Officejet 4500 Desktop All-in-One Printer - G510a and Windows 8.1

The drivers for this do not seem to work on Windows 8.1. Whilst I can print no problem I cannot access the solution centre from my new laptop and i cannot scan. It gives me the message No scan options refer to device documentation to troubleshoot. It works fine on my old laptop which has Windows XP installed.
NB i have tried installing from your website and when i click on install it runs for a few seconds then sends the error message that it cannot find the file.
Does this mean that the HP Officejet 4500 Desktop All-in-One Printer - G510a is not fully compatible with Windows 8.1. Help please I am getting very frustrated.

Hi amp229,
Welcome to the HP Forums!
I see that your are getting the specified file cannot be found error, during the installation.
Please try the following:
1.) Check that IE pop-up blockers are turned off before downloading the installer. Internet Explorer Pop-up Blocker: frequently asked questions.
Then try the install.
2. If you're running McAfee Live Safe or any other firewall, please temporarily disable the "real time scanning". Turn off real-time scanning.
Then try the install.
3. Go to the start screen (you may also press the windows key + R to open the run box) and type %WINDIR% this should show the windows folder.
Click on the folder and scroll until you see files. Look for a filed named "HPWINS*.DAT" (the * is for a number that varies) remove this file and try the installation.
Then try the install.
Hope this information helps, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

App for air printing for hp 4500 all in one

Is there an app for printing from ipad2 to a office jet 4500? I know that there is one for an e4500

Hi Walk1,
Welcome to the HP Support Forums. I understand that you would like to learn how to AirPrint to your HP printer.
I'm presuming that you have the HP Officejet 4500 Wireless All-in-One Printer G510n. The printer doesn't support Apple's AirPrint but you are still able to print from the iPad. I have included a document on printing from Apple devices to HP printers that don't support AirPrint. For additional reference I have also included the FAQ documents for HP's mobile print apps, HP ePrint and HP All-in-One Printer Remote.
Printing from Your Apple Device with Non-Web-Enabled Printers (No Apple AirPrint or HP ePrint Suppor...
HP ePrint Mobile App FAQs
HP All-in-One Printer Remote Mobile App FAQs
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP ENVY 4500 e-All-in-One Printer/Mac OS 10.6/can't scan multiple pages as single document/file

Mac OS X 10.6.8
HP Scan app 4.4.1
In the HP ENVY 4500 e-All-in-One Printer support page for scanning with a full feature driver installed. Under "How to scan a multi-page original into a single file for HP Scan software version 4.0. Everything is OK until after I've scanned the documents and clicked "Done". (Step # 6) & Click Send , click Folder , name your file, and then save the file to the computer.(Step # 7)
This is where I go wrong. I can't find the Format drop-down menu to complete Steps 8 & 9.
Click the Format drop-down menu, select Contents , and then check the box to Save all items to a single file .
Click Save .
This question was solved.
View Solution.

Hi MaWoo,
Thanks for your post and welcome to HP Forum.
Please make sure you select PDF or Searchable PDF as the Format. You should then find a box to check for "Combine into single document".
Best regards,
Mandy
Say "Thanks" by clicking the Thumb up in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
Although I work for HP my posts and replies are my own

Officejet 4500 Wireless All-in-One Printer - G510n & Win 7. Installing since October Last Year.

I have a Toshiba Satellite A665 Laptop with Windows 7 Home Premium OS. Initially I installed the Printer software and Drivers from the product disc, connect via USB during setup as requested and the printer would work fine, until I shut it down at the end of the day. The next day, I get the message that the "Drivers for Officejet 4500 Wireless All-in-One Printer - G510n are missing". This all started last October and continues.   The Network diagnostic tool doesn't see the printer, but the Print & Scan Diagnostic tool identifies it, but then the program stops responding.
I have installed, uninstalled, reinstalled the drivers and software from both the product disc and from hp.com at least 10 times. I have installed the basic setup as well as the full installation. the only thing I can think of is when the printer goes into power saving mode, I lose my wireless connection.

It sounds like your printer IP address might be changing.   Have you run the HP print scan doctor?
hp.com/go/tools --> HP Print and Scan Doctor
This tool will often find issues with printer driver installation.
I don't have a OfficeJet 4500 here, but if there is a wireless button you can push it, get the wireless menu, select IP address.   Does this match the IP Address you find when you select "(Windows Start) --> All Programs --> HP --> HP OfficeJet 4500 --> Update IP Address" from Windows?
If they don't match, use the IP address from the printer and type it into the Update IP Address window. This may help...
I am an HP employee.
*Say thanks by clicking the "Kudos! Star" which is on the left*
*Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.*

How do you get a MacBook with OS X10.6.8 to print to an HP 4500 all in one wireless printer?

How do you get a MacBook with OS X (10.6.8) print to an HP 4500 all in one wireless printer?

Go to http://www8.hp.com/us/en/support-drivers.html and ensure you have the latest printer drivers loaded. Also, HP will often post the steps to enable the wireless functions when setting up the AIO functions.

All in one printer does not scan.

All in one printer model: HP Officejet 4500 G510n-z
Computer: HP 2310 Series Wide LCD monitor
The scanner does not scan. I think it is not connected or set up and there are no instructions in the manual. The printer and copier work fine. I ran HP Print and Scan Doctor and it could not detect a scanner. What can I do?

What OS and how's the printer connected?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Trying to network HP Envy 4500 all in one with OSX 10.9.4

First time installation of HP Envy 4500 all in one was going well on Mac with OSX 10.9.4. However I can only get the printer to work with cable. HP instructions were to re-insert CD and follow instructions for 'reconfiguring without cable' however this was not an option on the CD, it just tried to repeat the installation.
Configuring Device through my Mac came up wit this message- "Device not reachable. the woreless network settings were successfully downloaded to your device. However your mac was unable to locate the device on the network."
There is no point me having the wireless option if it needs to have a cable connection. Please can anyone help me with this last stage to get set up. Many thanks.
This question was solved.
View Solution.

Hello @Allgoodthyngs , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are running into connectivity issues. I would like to help.
I would recommend you perform a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would then suggest this document on Wireless printing center Troubleshooting Issues.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP 4500 All-in-one Wireless Wep error

I have installed the HP 4500 All-in-one wireless printer. It recognizes the Apple network and then ask's for the WEP. I enter that code and it says invalid WEP. It is not the incorrect password........Help!
This question was solved.
View Solution.

Yup Open Airport Utility (let me know if you cannot find it - I don't know what operating system you are using), click once on your Airport Extreme on the left of the window, then click "Manual Setup" along the bottom.
Navigate to the Wireless tab and then change from WEP to "WPA/WPA2 Personal". Enter a password that YOU create. Make sure it is at least 13 characters, numbers and letters, upper and lower case.
Click Update.
Now go to each of your wireless devices and re-login to your wireless network with your new password.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP 4500 All in One Printer

Similar Messages

Maybe you are looking for