HP 4500 Series

I have an HP 4500 Series and I am trying to connect it from USB to wireless but it says that the wireless radio is not functioning. What does that mean and how can I make it wireless?

Go to your settings on your printer.
1. Go to WIRELESS
2. Turn your wireless radio ON
Then try to finish the converting USB to wireless.
You can also perform a hard reset. Unplug the power cord for 30 seconds, and plug it back up.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Similar Messages

Printer HP Envy 4500 Series cannot be contacted over the network

My wireless printing chooses when it wants to work, and right now it's really acting up. It is connected wirelessly, it is the default printer, but after troubleshooting it is telling me "Printer HP Envy 4500 Series cannot be contacted over the network." What can I do to get printing again?

Hello featherfamily,
Welcome to the HP Forums.
I see that you are having an issue with the printer not connecting with a wireless connection.
Please click on the following link that deals with when the 'Printer is offline' Message Displays on the Computer and the Printer Does Not Print: Windows 7.
Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HOW CAN I DOUBLE SIDED PRINTING ON MY HP ENVY 4500 SERIES PRINTER

I recently bought my HP ENVY 4500 series printer and love it. The only problem I have is I can seem to work out how to do double sided printing, cant see any options and the booklet doesnt tell me...maybe I am missing something. Please help! I hate wasting paper

have you already installed the software for the MAC?
what is the OSX version of your MAC?

Windows 8.1 Will not Allow me to Install the Drivers for Officejet 4500 Series

Hi....I just purchased my new Laptop running Windows OS 8.1. I tried to install the Software for my
HP Officejet J4500 Series and the install process Stops with this MESSAGE:
"HP Officejet 4500 Series. The Operating System on this Computer is not Supported. The installation
cannot continue until this is resolved
Supported: Windows 2000 Windows-XP 64 bit"
I love my Officejet J4500 it has never failed me. I purchased this printer 3 years ago from Best Buy.Is their a New Software Drives that I can Download so that my J4500 will operate with my Win-8.1 OS ??
What suggestions do you have for this problem... Thank you for your Help with this....Rginarizona

Hi,
Try
HP Printer wizard
http://ftp.hp.com/pub/printers/hppiw/hppiw.exe?jumpid=ex_r4155/hho/ipg/ccdoc/piw/
Download and Run the HP Windows 8 Printer Install Wizard
Regards

My 4500 series printer is back in MI. I am currently in AZ with my 1410 series. I can't print from

I have a laptop that goes back & forth from MI. to AZ. Mi has the 4500 series, and AZ has the 1410 series. Now my laptop shows the 4500 as offline & I can't print from my printshop, or Kodak files. How do I put the 4500 back online???

Did you want to print to your remote printer or are you trying to print to the 1410?
If you have Windows 7 you could set your system up to have a different default printer in AZ than in MI. To do this go to the Devices and Printers folder, right click on the local printer and in the menu bar near the top a new menu item will appear that allows managing default printers. You would then be able to have the default printer change automatically when you change locality.
You can also manually change your default printer. If you have Windows go to the printers folder, right click on the desired printer and select Set as Default.
If you are trying to print to the remote printer and it has gone offline (perhaps due to a temporary power outage) you may have to physically reset the printer or have someone local do it for you.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How do I fax to pc 4500 series?

How do I fax to my pc?

MissRose wrote:
How do I fax to my pc?
Hi,
What do you mean "fax" to PC ? Are you talking about eFax ? What is your pc 4500 series ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Advantages of 10/100 Management port on 6500/4500 series

Hi mates,
There is a common port called "10/100 MGT" (next to console port) on the supervisor engines of 6500 and 4500 series switch.
Why would I need that port since I can telnet through Layer2 10/100 ports??
Is that port doing the same job as console port? in addition allows longer distances over cat 5 cables??
Do we need to assign IP address on that mangement port?
Thanks for helping :)

Hi,
The 6500 supervisors do not have a 10/100 MGT port. The cat4000 supervisors do, however.
On the supI and supII, the Ethernet management ports are for network management only. These ports do not support network switching. See:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/inst_gd/05modins.htm#xtocid184774
On the SupII+, SupIII, and higher, the Ethernet management port is used (in ROMMON mode only) to recover a switch software image that has been corrupted or destroyed due to a network catastrophe. This port is not active while the switch is operating normally.
See:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/hw_doc/78_13686.htm#wp32993
HTH,
Bobby
*please rate helpful posts

Cisco 4500 series switch

Dear support taem, in cisco 4500 series switch i am getting error interface TenGigabitethernet 1/14 utlization threshold violated.current in traffic 705.228 (70.52 %) and out traffic 707.462 ( 70.75 %) whereas configured threshold is 30 %.
i have checked on switch but qos is there in configuration.
where i need to check if any restriction is there for incoming and outgoing traffic.
and what necassery troubleshooting i need to be done.

This looks like a policy shaping.

HT4356 I have an Ipad air and an HP 4500 series printer and get anything to print. Any suggestions on how I can print?

My Ipad Air will not print to my HP 4500 series printer. Any suggestions?

iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
 Cheers, Tom

Span Port Session in Catalyst 6500 & 4500 series

Hi,
May I know the maximum monitor session for latest Catalyst 6500 & 4500 series?
Thanks

Hi,
See the below links wich provide all details about the SPAN sessions:
6500
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/span.html#wp1036881
4500
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/31sg/configuration/guide/span.html#wp1020415
Regards,

Vss quad sup support for 4500 series

Hi all
I'm looking at at 4507r+e with dual supervisor 7
I want to run vss, however does it support quad supervisors?
I hear the second one will have to be in rommon?
In a failover how would I get the 2nd supervisor working ?
Would you need to manually boot it?

Have a look at the config guide:
Quad-Supervisor (In-chassis Standby Supervisor Engine) Support
The Catalyst 4500 series switches support dual supervisors in a redundant chassis, which can be configured for SSO or RPR mode. However, when a chassis is running in VSS mode, it supports a second supervisor engine, but only in rommon mode. In-Chassis-Standby (ICS) can not participate in control, management, or forwarding plane functioning. This makes ports on the supervisor engine in rommon mode available for forwarding although it neither participates in any switchover nor provides protection against any failure. In VSS mode, an In-Chassis-Active (ICA) supervisor engine participates in VSS control/ management operation and manages ports on the supervisor engine in rommon mode.
If the second supervisor engine is inserted in a redundant chassis, the following information applies:
•It must also be manually configured for VSS mode, i.e., it must have been converted from standalone to VSS mode previously. If you insert a supervisor engine that was not configured for VSS mode, it will disrupt the operation of the ICA supervisor engine. If it was previously configured, automatic boot must be disabled (i.e., to boot only to ROM Monitor) with the confreg command in rommon.
The supervisor engine does not takeover or boot automatically when the ICA supervisor engine fails. A manual boot up is required to make it participate in VSS; it then functions as an ICA supervisor engine.
More details on rommon commands are found at this URL:
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/15.1.2/XE_340/configuration/guide/rommon.html#wp1013959
•A supervisor engine's conversion from standalone to VSS occurs per engine. If two supervisor engines exist in a chassis, one should be retained in rommon or removed, before conversion occurs. You can convert the second supervisor to VSS mode while the first supervisor is removed or in rommon, with the additional step of setting it to "boot only to ROM Monitor." When both engines are converted to VSS, they can be inserted into the chassis together and re-booted.
•Booting a chassis with two supervisor engines configured for VSS causes one of the engines to become the ICA and participate in VSS. The other engine, which becomes the ICS, will continuously reload. The secondary supervisor (the ICS) must be configured to "boot only to ROM Monitor" with automatic boot disabled.
•When the ICA fails, the ICS doesn't take over because ICS support of SSO or RPR mode is unavailable. ICS (the secondary supervisor) must be booted manually to become the ICA and manage the VSS operations. For this to happen, the former active supervisor engine must remain in rommon mode.
•ISSU support requires ICA supervisor engines on both chassis. The ICS supervisor engine does not participate in upgrade or any forwarding operations.
•Because ICS supervisor engines do not communicate with ICA supervisors, VSS and other configurations must be done at conversion time on the ICS. If not done or the configurations do not match the necessary VSS parameters (like, SwitchId, Domain, and VSL configurations), it cannot form a VSS when ICA goes down and ICS is booted manually. You can, however, enter these "bootup" commands to make it join an existing VSS domain.
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/15.1.2/XE_340/configuration/guide/vss.html#wp1204229
HTH

4500 series switches crashing when under load

Dear support community,
We are a small group of network managers and we recently came across a problem in our planned network upgrade considering the 4500 series switches. Six of these switches are configured as VSS redundancy resulting in 3 VSS units connected over double-link fiberoptic port-channels (1+1) building a ring topology.
As soon as we put load (3,5Gbit/s) on one of the port-channels between two VSS, one unit (both main and stdby switches) crashes almost immediately and then reboots. This first happened a few weeks ago, yesterday when testing it happened again but on another VSS connected to the first one. I was able to recover the crashinfo files from both units, they are are attached to this post aswell as the show tech_support output from the one that crashed yesterday.
Unfortunately we don't have the tools and knowledge for analyzing the files and we would appreciate your help. Thank you in advance.
Max S.

Wow. You're running a very old IOS.
If you need to stay with 3.4.X then go with 3.4.5, which is a maintenance release (fixes a few bugs). Read the Release Notes for more information.

4500 Series Switches and 802.1x MAB

My organization has multiple 4500 series switches experiencing the same problem when attempting to authenticate devices via MAB. The issue is that the "show mab interface fax/x details" shows the Client MAC in a waiting status. The device is never sending the switch it's MAC in order to proceed with MAB authentication, so of course the port never forwards traffic. However, if we remove authentication port-control auto the port starts forwarding and the device gains connectivity. Below is the interface configuration command and the MAB details. The IOS version of this current switch is 15.0(2)SG8. Are we missing something special for a 4500 as far as configuration is concerned.
interface FastEthernet8/16
description USER
switchport access vlan 600
switchport mode access
switchport nonegotiate
duplex full
authentication host-mode multi-domain
authentication port-control auto
authentication periodic
mab
dot1x pae authenticator
dot1x timeout tx-period 5
end
SWITCH-4510R#sh mab interface fa8/16 details
MAB details for FastEthernet8/16
Mac-Auth-Bypass           = Enabled
MAB Client List
Client MAC                = Waiting
Session ID                = 841AF6D100002931AF99B827
MAB SM state              = ACQUIRING
Auth Status               = UNAUTHORIZED

hello,
in my organization we have multiple 3560/2960 series switches and some 4500 with MAB.
the interfaces have the following config:
authentication host-mode multi-auth
authentication order mab dot1x
authentication priority mab dot1x
authentication port-control auto
authentication periodic
authentication timer restart 120
authentication timer reauthenticate server
authentication timer inactivity 600
mab
dot1x pae authenticator
Good luck

How to i get my hp 4500 series wireless printer to connect to my i pad

how to i get my hp wireless 4500 deskjet printer to work with my ipad

Hi,
You may print from your iPad through the local network using the HP ePrint mobile app.
You may find the steps to get and use the app in the following link:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&tmp_task=useCategory&cc=us&dlc=en&lc=e...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Cisco 4500 series switch-Supervisor Engine.

Is it possible to add two different supervisor engine module in a chassis(WS-C4507R+E Chassis)? (WS-X45-SUP7E in slot 3 and WS-X45-SUP6E-
Redundancy in slot number 4)

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/31sga/configuration/guide/RPR.html
Redundancy requires both supervisor engines in the chassis to be of the same supervisor engine model (same model, same memory, NFL daughter card and so on), and to use the same Cisco IOS software image.
Thanks
Hari.Sivaji

HP 4500 Series

Similar Messages

Maybe you are looking for