HP 4600 connected to time capsule is NOT working after SL

As a background, I connect my HP Laserjet 4600 to my Time Capsule using ethernet. From my macbook connected via Airport to the Time Capsule created network, I was able to print.
However, once I upgraded to SL, despite adding the correct printer in the print dialogue, it does not work anymore. From the print queue it says "Network host XXX is busy,...." XXX is the hostname of the printer.
Please HELP!
Thanks to all in advance.

Have a Look at this Discussion...
https://discussions.apple.com/message/15428508#15428508

Similar Messages

My Time Capsule does not work with existing WiFi

Following a question solved on March 24 by LaPastenague, but gone bad again.
Apple AirPort Time Capsule
I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured, but then it works.
The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
So, I am curious if you have any idea ?
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

I can deal with the last question first and easily.
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
Open the airport utility .. go to the disk tab and select erase.
When you select erase you will get mulitiple options.
Quick removes the file table but does not delete the files,, it takes 2min or less.
A Zero out data is the secure way,, by writing 0 ie low level drive format.
It can take several hours..
7 pass will take a week.. not recommended..
35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
The fact that it did work and has now failed might point to faulty unit.
The only way to tell is reset it properly to factory and start over.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
Remember to keep all names short, no spaces and pure alphanumeric.
Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

Why is Time machine backup not working after Mavericks upgrade?

Why is Time machine backup not working after Mavericks upgrade?

I had the same problem due to the Fire Wire port. Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device. I find it strange that as soon as I installed Mavericks. The drive does work using USB. It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

HT3728 since Oct 25 my time capsule is not working properly. I enter the time machine to check my backups and the only thing I see is balck screen on every single day since I put it to work on my house. Any ideas on what's going on?

I am having problems with my time capsule.
It's not backing up... if I enter the time machine, all I see is a black page, any day I look, since the day I bought it.
Was not like this before Oct 25...
Any ideas on what's going on and what should I do to make it work again?

Check the USB cable first to make sure that it is operating correctly on another connection.
You may need to use a powered USB hub with the drive since the USB port on the Time Capsule is not a high powered port like you have on your Mac.
You may need to use the powered hub even if the hard drive has its own external power supply.

Time Capsule backup not working anymore after upgrade to Snow Leopard

Hi,
after I upgraded to Snow Leopard I started the backup process with the time capsule. Within several days I tried this about 5 times and the iMac crashed or froze after some time doing the backup - but it never completed.
I then deleted the whole content of the time capsule and started a fresh backup. Now I receive a message after some gigabyte that there was a problem and I should try it again. Again the backup has not finished so far. I tried to reduce the amount of files to backup by excluding folders - no chance. Since the upgrade to snow I was not able to complete one single backup.
Any ideas or similar experience?

I have had a similar problem. I have the latest 1TB Time Capsule and backup worked fine in Leopard. I am backing up over my home wireless network. The backup starts, but at some point it freezes with the spinning pizza wheel if I click on anything. Everything freezes with no possibility of force quitting any application.
I tried trashing the plist for Time Machine, but that didn't work. Tonight I'm going to try a backup with the computer connected to the Time Capsule by Ethernet.
I can access my existing Time Machine backups on the Time Capsule.
This is a frustrating situation. But for this, SL works great, but this problem is a critical one.

Time Capsule does not work and i can not not mount it anymore, even after follow all apples instructions at FAQs

My Time Capsule suddenly stopped working, and i can not even mount it anymore. When i ask for a backup, the time machine keeps looking for a disk with no success.
I tried all the FAQs suggestions:
1) I change the name of the disk using Airport Utility;
2) I updated it using Airport Utility.
Now i can not even try to erase the disk because after to update it, the disk in not listed anymore.
Now i can just read a "internal disk needs repair" message. that wasn't there before, having in mind that the first response was "there is no space at the disk for a backup".
What can i do?

The TC has a fault..
Power it down and let it cool off overnight. Power it on again the next morning and check if it works.. no luck factory reset.. do all the tests quickly as you have 10-20min before the Temp rises to kill it again.
No luck it is dead.. give us the actual model number.. A1xxx from the base.
How old is it?? Beyond 3years they do become dodgy.

My Time Capsule has stopped working after I tried to configure an extended wifi network

My Time Capsule was working fine until I tried to configure it with an extended bridge. Now either the amber light is solid or the solid amber comes on for awhile and then goes completely out.
The AirPort Utility says that there is no internet connection, the DNS settings are wrong, and that the disk need to be repaired. Using Disk Utility, the Time Capsule does not even show up so that I can repair it.
I am running OSX 10.7.5, and besides the Time Capsule I have a Vonage Motorola (VT2442-VD) for VOIP, which of course is not working because it was connected behind the Time Capsule.
I'm in Italy and cannot call Apple directly since I now do not have phone service.
Any suggestions how I can check/repair the Time Capsule, and then configure it properly to my satellite broadband?
Thanks for you help.

How old is the TC?? The LED should never go solid amber.. that indicates disk failure.
Or completely out.. that indicates power supply failure.
As a note you cannot extend wireless to a non apple wireless router... you can only plug in by ethernet and use the TC to create a wireless network.. this can have the same name as the main router,, same SSID in other words and same security but set to different channel..

Time Machine does not work after installing mavericks

After I installed maverick on my imac, my time machine backups don't work anymore!!!!
I have a normal portable HDD attached to my Imac with time capsule backup from before mavericks was installed.
I also has a Buffalo NAS as a second Time Machine Backup.
TIme capsule does not recognise my Buffalo NAS and tells me that it is not available. It has previous backups from Mountain Lion for sure!
My portable HDD keeps saying "Preparing for backup" for eternity.
Please, APPLE, what is going on with mavericks? Regretted upgrading.
My backup is 31 days behind because of this! Unacceptable!
But what is strange is that I can connect to my portable HDD and Buffalo NAS as a drive. What I have been doing is to copy and paste the important stuff into the drives. But it really defeats the purpose of time machine, right?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

IPhone 4 & iPod Touch can connect to Time Capsule, but not Internet

My family and I have an iPhone 4, iPhone 3G & iPod Touch. Our WiFi comes from a Time Capsule. My Macbook Pro can connect to the WiFi and get online, but the iPod & iPhones can only connect to the Wifi, not actually get online.
We some issues with our ISP last week, which took some time and some messing with the settings on Time Capsule to resolve. At one point, Airport Utility asked me if I'd like to switch to bridge mode...I'm not sure if that ever happened or not, to be honest, and don't know how to see if I'm in bridge mode or not (or even what that means, really).
With my iPhone 4, I can successfully connect to the wireless network, but the icon in the top left of the screen stays on 3G (unless my service drops in my house, in which case it shows the WiFi icon but won't let me connect via Safari or any other apps).
With the iPhone 3G, it does connect, but doesn't ever show the WiFi icon.
With the iPod, it says it connects, but doesn't ever show the WiFi icon. I get the error "Safari cannot open the page. The error was: Operation coudl not be completed. Invalid argument."
Does anyone have any idea what I could do to resolve this?

I fixed this on my own. How did I do it?
1. Reset Time Capsule to factory settings (via Airport Utility)
2. Renamed my WiFi network
3. Restarted my router
Everything's fixed. I've seen this problem all over the Web but no solutions, so hopefully this will help someone.

Windows 7 connects to Time Capsule but not internet

I have a macbook pro and two windows vista pcs that connect and surf the internet fine with Time Capsule, however, for two windows 7 laptops, they detect the network and can connect to the network, but cannot connect to the internet.
I'm not sure what the problem is, and diagnosing/repairing the network does not help.
So currently the network looks like this with the Windows 7 laptops:
W7 Laptop --- Time Capsule Network -x- Internet

I too have this problem, I see that there is a solution solved notice at the top of the page, but I do not see the solution.

Older Macbook connects to Time Capsule, but not really

Problem: My wife's Macbook (Intel Core Duo) is able to connect to my new Time Capsule, but it quickly loses its connection. It doesn't really disconnect though - it still says that it is connected with full reception, but there is no internet, or time machine, and I can't even ping the router.
The router logs show that she is still connected though, because they don't say "Disassociated with station" until she turns airport off.
There are definitely a lot of wireless networks around here, but I don't think interference is the issue, since many other computers are working fine. Her computer can connect to some of the other routers just fine. She could also connect to my old router just fine.

rvenable wrote:
Problem: My wife's Macbook (Intel Core Duo) is able to connect to my new Time Capsule, but it quickly loses its connection. It doesn't really disconnect though - it still says that it is connected with full reception, but there is no internet, or time machine, and I can't even ping the router.
Welcome to Apple's discussion groups.
When that happens, if you open the Network panel of System Preferences, select the AirPort connection item on the left, click the "Advanced" button, then the "TCP/IP" tab, do you see reasonable values for the several fields?
It might help to reset the connection settings on your Mac using these steps one at a time until it works again:
1) Use the AirPort menu bar item to turn AirPort off, then on again.
2) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
3) In the same panel as (2), define a new location and see if you can make that work.
4) In the same panel, select the AirPort connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease".
5) In the folder /Library/Preferences ( not <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
They may not help, but they'll only take a couple of minutes to try. Before you try these, note all your network settings, because the latter steps will destroy them.

Vista connects to Time Capsule but not to the internet.

Hi. Please help, I am pulling my hair out. I have just bought a Time Capsule to use as a base station to connect my laptops, PS3, iPhone etc to the internet. When I set up my Time Capsule, I got my Macbook Pro, my PS3 and my iPhone connected in about 15 minutes flat. But I have now been trying to get my wife's Sony Vaio laptop (about one year old) connected for about 3 hours. It can see the network no problem, it connects, but it only ever connects locally and will not let the Windows machine connect to the internet. When I select which network to join, it correctly identifies my network with the correct name, but once it is connected it only sees an "unidentified network".
I have looked through the forums and made sure that the NETbios is started and the security encryption matches.
If I go to the "Summery" page in my Airport Utility on my Macbook, it can see the Windows laptop.
The more I try the more I want to throw the windows machine out of the window and get my wife a mac, but she informs me that she is 28 and she is a PC! Therefore, I need to fix this...............please help.

From the Vaio's Windows Desktop, start a Command Window session. (ref: Start > Start Search > enter cmd, and then, press Enter). At the command prompt, type-in ipconfig /all, and then, press Enter.
You may have several network components listed. For example, entries for both the Ethernet and Wireless connections. We want to concentrate on the wireless adapter settings.
Note the values of the following:
o IPv4 Address - This should be an IP address in the same range as that being provided to the other network clients. By default, the AirPort uses the 10.0.1.n range ... so an address like 10.0.1.10 would be appropriate.
o DHCP Enabled - This should be "Yes."
o Default Gateway - This should be the IP address of the LAN-side of your AirPort. By default, it would be 10.0.1.1.
o DHCP Server - This should be the same as the Default Gateway value.
o DNS Servers - These should be your ISP's DNS servers IP addresses.
Again, compare these values with the other computers that are successfully access the Internet. Except for the IPv4 value, all others should be the same.

Would like my macbook pro to only connect to time capsule and not to airport express that is extending network. Is there a way to do this?

I have a network set up with a main time capsule and airport express. The airport express is configured to extend network. While its fine for our iphones and ipad to connect to the express, I would like the Macbook pro to only connect to the time capsule as it seems to run faster. Any way to do this?

You are extending the 2.4ghz.. as that is the only way you can connect iphones.
But if you have Gen2 or later TC you can setup 5ghz to use a different wireless name to 2.4ghz.. and it is much faster.. you need to be close to the TC though.. like in the same room.
Make sure you download 5.6 airport utility if you haven't already.. go to the wireless options and the extra wireless area.. set a different wireless name (SSID in everybody but apple's book). Then you can deliberately select it.

My Time Capsule will not work through Time Machine but need to back up because my hard drive is corrupt. I hard-wired it to my MacBook Pro and have been dragging files to capsule in finder window. Will I have problems since it's flashing yellow constantly

My Time Capsule is constantly flashing yellow and it will not preform periodic back-ups. When I tell it to from the icon on the top task bar, it freezes MacBook...every time. I am now dragging files from internal HD to TC found in Finder after hardwiring it to laptop treating it as an external HD. Can in trust it to store files and photos as my MacBook is telling me to back-up because my internal HD is corrupt and may need replacing?
Thanks in advance.

A PC can have more issues connecting than a Mac.
But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
Important thing is to get access to the TC.
The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
http://support.apple.com/kb/DL1482

Restore from Time Capsule slow not working properly help!

I bought my time capsule about two weeks ago. I have backups from most of those days on my time capsule. Since then I had to clear my hard drive and re-install my operating system. I did not think this was a big issue since i had the backups on my time capsule. However, whenever I try to do anything with a restore it is EXTREMELY SLOW. I only once got it to where it said it would restore, and I had and estimated time of over 15 days. That is just not even reasonable. I have tried restoring from several sources: restore from backup (after booting from disk), migration assistant, time machine. They all are very very slow and I only have about 100gb that was backed up. Does anyone have any tips on how to get this working. I have spend over 6 hours on tech support. I am connect via ethernet cable and I just do not understand why this is so slow.

I bought my time capsule about two weeks ago. I have backups from most of those days on my time capsule. Since then I had to clear my hard drive and re-install my operating system. I did not think this was a big issue since i had the backups on my time capsule. However, whenever I try to do anything with a restore it is EXTREMELY SLOW. I only once got it to where it said it would restore, and I had and estimated time of over 15 days. That is just not even reasonable. I have tried restoring from several sources: restore from backup (after booting from disk), migration assistant, time machine. They all are very very slow and I only have about 100gb that was backed up. Does anyone have any tips on how to get this working. I have spend over 6 hours on tech support. I am connect via ethernet cable and I just do not understand why this is so slow.

HP 4600 connected to time capsule is NOT working after SL

Similar Messages

Maybe you are looking for