HP 470 mobile printer - lights flashing

I have a HP 470 mobile printer. What does it mean when both the green and orange lights flash. The cartridges seem ok.

HI,
Go to this page for help.
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c01182351&product=3434455
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

I have an IPAD 2 and would like to print to my mobile printer HP 470. Can I do this through the cable? What do I need to do?

I have an IPAD 2 and would like to print to my mobile printer HP 470. Can I use the patch cable? What do I need to do?

iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
 Cheers, Tom

A PIXMA MP170. Power & Alarm lights flash. Ink doesn't move when cover opened. Error on print (XP).

I have a PIXMA MP170. The Power & Alarm lights flash. Ink cartridges don't move when cover opened. Service Error 6500 on print from computer (XP).

Hello danlee58.
If possible, please document the error pattern that appears on the LED display of the printer. A letter and one or two numbers should be alternating.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HP Officejet 6310xi won't print - keeps blinking "reset power" and all lights flashing.

I have an HP Officejet 6310xi that won't print. When you select print, the paper begins to feed then suddenly stops before any printing begins and all lights on the face of the printer begin blinking and the message "RESET POWER" blinks in the screen readout of the printer. When I turn printer off and back on, the screen indicates a used color cartridge is inserted and I hit OK, then indicates used black cartridge is inserted, then I hit OK, then it says it needs to align cartridges, I hit OK. After trying to align cartridges, it suddenly stops and goes back to all lights flashing and screen flashing "RESET POWER". I can hit cancel during cartridge alignment and printer goes to normal ready position. I can then print a test page. But as soon as I try to print anything else, even the diagnostics page, it goes back to flashing all lights and "RESET POWER". I did a semi reset (unplug, wait, plug in holding #6) and a full reset (with #9). That did nothing except wipe out the date on the screen read out of the printer. So I know the full reset executed correctly but it did not solve my problem. Please HELP! I am reposting with email me selected - I'm new at this posting to forums...

johnhp75 wrote:
how do I reload the software in the printer?
See link below for the software and driver downloads
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=1120043&
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

EStation - all three lights flash - have to restart to print.

Hi, I have a new eStation C510a printer and have installed all the drivers and software, configured the wireless conenction, yet for no reason all three lights flash and the PC thinks the printer is disconnected (even when using usb connection!) I have to restart the printer to get a print out and sometime all three flash half way through printing.
I know the middle wireless light flashes when the wireless is not available but I dont know why all 3 flash!
Any help greatly appreciated

You may have a faulty printer. Contact HP for a warranty repair or replacement.
http://welcome.hp.com/country/us/en/contact_us.html
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My hp 100 mobile printer will only print one page then quits. will not print all of the pages.

my hp 100 mobile printer will only print one page then quits. will not print all of the pages. i have rebooted, new install, and reset. still the same thing. when i look it shows that it is printing but there is nothing happing. i use this with my lap top.

Hello colt1,
Are you using Bluetooth or USB cable to connect to the printer? Did you install from the disc, or from the online program? When it sits there and doesn't print, does it eventually give error messages, lights flashing, etc.?
Thanks,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HP 6940: carriage stuck at left side, resume and power lights flashing

I've used this printer under ubuntu/linux for about 2-1/2 years. Color printing has always been a challenge, I get about one usable page per 5 test pages. About a year ago, it stopped printing; hp-info (part of the hplip package) said the color cartridge was defective. I was able to get black&white printing by removing the color cartridge.
This week, I had to print some stuff in color. I pulled the color cartridge out of its ziplock, re-installed it, and ran a quick cleaning. A test print showed that wasn't enough, and I ran a full cleaning, after which I was able to print a good test page, and then one page of my job.
When I tried to print the second page, nothing happened, and the resume and power lights started flashing. I cycled power on the printer (I have to do this very frequently, even for black and white jobs), but it didn't fix the problem. I pushed resume, but no dice. I pulled the back cover to check for paper jams: nothing jammed. Replaced the back cover, pulled the paper from the tray: nothing jammed. Replaced the paper in the tray. Pushed resume again: it made noise, but didn't clear the problem.
I opened the lid, and the carriage was all the way to the left-hand side. Pushed resume: a small plate in the loading dock at the right-hand side moved forward and then back, but the carriage stayed at the left-hand side. Tried (gently) to move it to the right, but it's firmly in position.
hp-info now says:
"status-desc Paper or cartridge carriage jammed"
The color cartridge is an HP cartridge, and came with the printer. The paper is HP paper.
Any suggestions?

Hello there! Welcome to the forums @roberts460
I would suggest checking out the guide below for troubleshooting blinking lights to try and help resolve the issue you're having with your Deskjet 460c.
Blinking Lights on the HP Deskjet 460 and Officejet H470 Mobile Printer Series
If the troubleshooting does not help at all, I would lastly suggest technical support.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

C6380 Unresponsive. Multiple lights flashing. Screen is white.

After several years of dependable use, my C6380 may be dead. The following lights flash about every second: (small light by + sign, Print Photos, Red Eye Removal, On-Off and blue Wireless light. Screen is white. If I hold down Print Photos and On-Off buttons, screen changes to green with numbers 1 thru 5 in white. Lights quit blinking (On-Off light and small light below memory stick opening are on). On-Off does not work, must unplug. Ink carriage does not move when cover is opened, so I cannot remove ink cartridges. Is there help for this machine?

You can reset your printer by following the steps mentioned in this post:
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-and/HP-Photosmart-C6380-All-in-One-always-pr...
But, this reset may reset all your wireless customizations as well.
Hope this helps.
I work for HP.

HP6310 won't respond to power button, camera light flashes

After turning my HP6310 off by unlugging the power cord, I can't get it to turn back on properly. I plugged the power cord back in and the display lights up blank and the camera light in the front lower left flashes. The power button does not light up and when pressed, does nothing.

Hi @mcdillon99,
Welcome to the HP Forums!
I noticed that your HP officejet 6310 will not respond to the power button, and the camera light flashes. I am sorry to hear this, but happy to help!
I would recommend to go through this guide, The HP Printer Won't Turn On or Respond When the Power Button is Pressed. (Even though the guide title may not match your issue, I believe the solutions will help).
Hope this resolves your issue!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Macbook air camera light flashing on resume?

Hi guys, my Macbook air (11 inch, mid 2011) has recently had its facetime camera light flashing on resume when I open the macbook lid. The time period when it flashed varies, but I am worried about security, and if someone has access to the camera.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a couple of minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d; /[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d; /:$/{s/ *:$//;x;s/\n//p;}; /^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/$.*: $$.*$/ $\2$/;H;}; /Apple|SCSM/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); E=; for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* || continue; ls | while read f; do [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=" *" || e=; awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print $0 "'"$e"'"}' <<< "$f"; done | tail`; Pm "${D[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/B,P*P,Qu*T,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in DYLD_INSERT_LIBRARIES DYLD_LIBRARY_PATH; do launchctl getenv $e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed 's:/Users/[^/]*/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

F2280 Both Ink lights flash with cartridge in or not!

Hi there,
The printer is claiming an Ink failure Error (E is showing and both ink lights flashing)
I tried cleaning the contacts. Tried turning off with power cable out.
Tried removing catridge and plugging in and the 2 lights still flash showing E!
Please help
Thank you

Hi there Jane
There's a link below with troubleshooting steps for blinking lights on DJ F2280 that might be worth checking out.....
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01430567
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

HP officejet 100 Mobile Printer Stops in Mid Print

This printer worked fine (NO problems with Bluetooth even) for the first couple of months and several changes in print cartridges. For the last year, every time I print a document, it will either stop printing on the second or third document or stop in the middle of the first document, and all the indicator lights come on telling me I need to clean cartridges, etc. Every time is different. Some times it is one indicator error light, the next print job may trigger all the lights. Every print job I execute and it fails, I have to remove the battery, re-insert the battery and print again. It works every time after I reprint the job after removing the battery. The next document triggers errors again and it will not print. I do not have a warranty, but I am ready to throw it in the garbage! What can I do? I am running on a Mac Osx system. Please help. Thank you!

Hello there! Welcome to the forums @IdahoElk
I read your post about the printer issues you're having with your Officejet 100 Mobile printer. I have a couple of suggestions that may help you.
First of all, power reset the printer and ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 30 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Also, check out this troubleshooting document. Check the issues to see if you can find the description to what you are seeing on your printer.
Blinking Lights on the HP 100 Officejet Mobile Printers
If the troubleshooting does not help at all, I would lastly suggest technical support.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Happy Monday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Officejet 100 Mobile printer printing failure

When printing the printer start flashing paperjam led and does not print. When all work are canceled the printer won't "reset" even if power is switch off. When switchin on again the same yellow led (paper jam) is still flashing and printer won't print.Using HP Print and Scan Doctor shows that printer is reserved but there are no print que and spooler is empty, and stopping/starting printing service does not help either. Printer also has a battery but battery status led does not show any battery status, charging indidator works when power supply is connected.

Dear Leilanib,
Please follow the steps of this document:
http://support.hp.com/us-en/product/HP-Officejet-100-Mobile-Printer-series---L4/4231339/model/423140...
I hope you find it helpful.
Greetings.
* I am not an employee of HP, my work is voluntary.
If this answer was helpful and clarify or resolve your problem, please mark the issue as resolved and click my star next to give a kudo as thanks.
I am not an employee of HP, my work is voluntary. If this answer has been helpful and clarifies or solves your problem, please click the button
and click on the icon if you want acknowledge the assistance.

Deskjet 1050 ink light flashes cannot find a problem

Every so often for no apparent reason ink lights flash and printer stops printing. In the past I have solved this problem by turning printer off and leaving untill it decides to operate. This time it is not working.
DESKJET 1050 ALL-IN-ONE J410 SERIES

The Blinking Lights document, describes conditions causing the error states, and may provide some help for you:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02061335&tmp_task=solveCategory&cc=us&dlc=en&la...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

P2015 Ready Light flashes 4.5 minutes

I wrote a file printing program using CodeGear (previously Borland) Delphi that prints Delphi source code files on both sides of half sheets (5.5 x 8.5 ); I manually refeed the pages for printing on the reverse. The program bypasses the Windows printer canvas by using Windows API printer functions to send PCL 5 escape-sequences directly to a HP P2015dn printer connected to the USB port using the PCL 5e driver (The same results are obtained using the PCL 6 driver). The program changes the font to 16.67 char/in, changes the lines/in, changes the margins, and repositions the cursor several times.
    The program performs exactly as planned but after the last page is printed, the printer reset command is sent, and the printer is closed, the printer's Ready Light will continuously flash for 4 minutes and 40 seconds then turn steady-on as is normal. But even while the Ready Light is flashing (implying that the printer is receiving data), the above program can be run again and it will immediately print whatever file is requested.
Does anyone have any idea why the Ready Light flashes for 4 minutes and 40 seconds after the print-job is complete?

http://supportforums.blackberry.com/rim/board/message?board.id=8100&message.id=13769#M13769
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

HP 470 mobile printer - lights flashing

Similar Messages

Maybe you are looking for