HP 550 with window 7 ultimate 32 bit- microphone is not working

When i trying to communicate with my friends. They can not hear my voice but I can hear their voice properly. Please help me to out this.

What application are you using to communicate? If you are using Skype, you will first have to check the default microphone by going to Tools - Options - Audio Settings - Microphone. There is a drop-down menu to select the specific microphone you want to use. You can also see if the microphone selected is receiving any audio input because the volume meter will move up and down as it records sound.
Also, you may check the speaker icon in your system tray at the bottom-right corner of your screen. Right-click the speaker icon and select recording devices. Make sure your microphone or internal microphone is enabled and set to the default device, which is indicated by a green check mark.
These are just two areas that need to be checked first when troubleshooting microphone issues.
I am an HP employee.

Similar Messages

Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

HP Smart Web Printing has been replaced with HP Smart Printing. It does support Windows 7 and IE 6 to IE9. See this page for information.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

F 2210 Printer quit and can't be fixed with Windows 7 Ultimate 64 bit

HP DeskJet F2210 with Windows 7 Ultimate 64 bit.
I have tried the Print Doctor to no avail.
I tried the driver remover program. It just says "not responding".
I tried the Printer remover program twice but the printer is still listed.
I tried the on line installation. It sits doing nothing for 12 hours.
I have tried the Print Manager to remove the drivers and it says it can not.
I have tried the Print Manager to remove the printer to no avail.
Trying to reinstall the drivers, it just stops and the window disappears after a few minutes.
BUT, hooking it up to my lap top with Windows Vista and it works.
What can I do other than replace it with a different brand?

Hello Den942, and welcome to the HP Forums.
I see you are having issues with the software on your Windows 7 machine. I would like to try and help you find a resolution.
I would suggest Uninstalling the Printer Software. If you run into any issues during the uninstall, I would suggest using the windows tool on how to Uninstall or change a program.
Once it is uninstalled, I would suggest putting the computer into clean boot mode within the Microsoft configuration. I am including a document on How to perform a clean boot in Windows.
Once the printer is in clean boot mode, I would use this link to ensure that you have the most up to date software when installing the HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP Mini 110-3603tu PC Video Controller with Windows 7 Ultimate (64-bit) OS

Good afternoon! Please with me with my video controller installer, IDT high definition Audio Codex and Web camera. I shift from Windows 7 starter to Windows 7 Ultimate 64-bit OS but some of my drivers were not installed especially its video controller. Please help me when to download the said drivers. Thanks!
This question was solved.
View Solution.

Hi:
Try the 64 bit graphics driver from Intel.
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=19493&lang=eng&OSVersion=Windows%207...
Try this 64 bit IDT audio driver...
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&s...
See if installing the cyberlink you cam software gets the webcam to work.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-109796-1&cc=us&dlc=en&lc=en...

T60p Bluetooth Problems with Windows 7 Ultimate 32 Bit

Hi
I installed Windows 7 Ultimate 32 Bit (MSDN) on my T60p but in the device Manger are every Bluetooth entry yellow marked.
Can anyone help me?
regards
Coolskin

Hi pjg and coolskin!
The T60p:is not supported by the driver pjg linked to (see the release notes for it).
The latest Vista version for the T60p is here:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67250
As a community members pointed out, the download link on this page was broken. It was reported through the Lenovo Site Feedback page, and fixed. I find that site errors reported this way are usually fixed within 24 hours.
pjg wrote:
I recommend that you install the last reliable Bluetooth stack for Vista. For some reason, Lenovo has removed it but you can download it
I don't work for Lenovo. I'm a crazy volunteer!

Installation flashplayer with windows 8.1 and IE 11 does not work

I have installed Windows 8.1 64 Bit and i am using IE 11 and flasplayer version 11.9.900.170.
All updates from Microsoft are installed.
Flashplayer videos are not displayed. If i switch to compatiblity mode in IE 11, the videos are displayed correct.
The tests of flashplayer with adobe website delivers different results as follows:

This is a known problem with Internet Explorer 11, which Microsoft has been aware of since October 18 when they released their latest "untested" browser. The pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player. So far, Microsoft has made NO indication that they have any plan to fix it soon.
Microsoft's recommendation (as you've seen) is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

Odd Run As issue with Windows 8.1 - Run As domain administrator not working

I'm having an odd issue on a Windows 8.1 laptop. I log in with my standard account, but want to open things like group policy management with my special separate domain admin account. so I press shift, right click, run as a different user - fill in my username
and password and get an access denied message. I verified I was using the right account info, verified UAC was turned off. I can run it as my non-domain admin account but of course I don't have access to everything. In the event viewer, I'm getting these messages:
Application log:
svchost (1648) SRUJet: An attempt to open the file "C:\Windows\system32\SRU\SRU.log" for read / write access failed with system error 5 (0x00000005): "Access is denied. ". The open file operation will fail with error -1032 (0xfffffbf8).
This and a few other similar messages show up in the application log, over and over again.
Also the Application log has a couple of these, showing up only when I try to open as the domain admin account:
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards. No user action is required.
DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-1856965257-1504725669-3833077565-143885_Classes:
Process 1072 (\Device\HarddiskVolume1\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-1856965257-1504725669-3833077565-143885_CLASSES
Any help would be greatly appreciated. I'm at a complete loss.
As a quick edit - I also am not out of space on the hard drive, I have many gigs on my partition left.

Hi,
This issue may occur if you do not have the appropriate permissions assigned to the folder.
Please make sure you have the sufficient permission to access the folder:
logon with that domain admin account to check if you could access that file.
If it works fine, logon with that domain standard user account do it again.
In addition, why didn't you run as administrator directly(don't use
Run as different user)?
Karen Hu
TechNet Community Support

ITunes 64-bit and Windows 7 Ultimate 64-bit

I have a relatively new installation of Windows 7 Ultimate 64-bit and have not moved the "Music Folder" to a new location. I have moved the "My Documents" folder to a new location tho. Inside of the "My Documents" folder, I see folders named "My Albums" and "Music Lyrics", but no "Music" or "My Music".
After installing the 64-bit version of iTunes, I get the following error.
The folder "iTunes" cannot be found or created and is required.
The default location for this folder is inside the "Music" folder.
I have researched and seen many references to this error and Windows XP, but nothing for Windows 7.
Ideas?

Something may be awry with the special registry permissions on the My Music folder, Just. I think the iTunes installer looks for those in order to determine just where the default location of My Music is on a given computer.
But since this is a first-time install, the situation should be pretty simple to recover from.
Hold down the shift key when you go to launch iTunes. In the dialog box that comes up, select "Create library" and put the library where you please.
Probably a good idea after doing that to try launching iTunes again, just to make sure that it is still finding the iTunes folder. But by default, next time you open iTunes (after creating a new library), it should try to open the library in the location you created the library in.

P45 Platinum, Windows 7 Ultimate 64-bit, 8GB DDR2 PC8500 Problem

Anyone else experiencing this problem? or have a solution.
I tested Windows 7 Beta; I basically built a computer to test it.
Intel Quad Core P6600
MSI P45Platinum Motherboard Supports Max of 16BG & BIOS updated to current
4GB of Corsair (2 x 2GB) TWIN2X4096-8500C5DF (Native 1066MHz Overclocked DRAMS)
500 GB Western Digital SATAII
HIS HD 4850 512MB GDDR3 Video Card
No problem with Windows 7 Ultimate Beta 64-bit and Windows 7 Ultimate RC1 and finally Windows 7 Ultimate – Retail (RTM) 64-bit Boots in 15 seconds.
So I figure if 4 GB is great, then 8BG should be spectacular, So, I purchased an additional 4GB of Corsair (2 x 2GB) TWIN2X4096-8500C5DF memory and installed to fully populate my 4 dual channel slots.
To my dismay, my system boot time increased to 30 seconds and then the system became unstable and exhibited random crashes with all sort of page file and system errors.
I removed and swap the new 4GB memory for the old it boots and operates fine.
So then I thought maybe it was bad memory so I interchanged new 4GB for the existing 4GB and it worked fine. It seem to be an issue with installing more than 4GB.
I then searched the Internet for a solution and discovered this 8GB issue is a known problem with Windows 7 Ultimate 64-bit with no solution in sight. Some seem to think it is a hardware issue and other seem to think its an software issue with Windows 7 Ultimate – 64-bit.
I have seen some info indicating that installing 8GB of DDR22 PC-6400 doesn't have the problem.
Thanks in Advance
Calvin

The MB specifications state clearly that 1066 and above is OC only.
Quote
Overclocking
This mainboard is designed to support overclocking. However, please make
sure your components are able to tolerate such abnormal setting, while
doing overclocking. Any attempt to operate beyond product specifications is
not recommended. We do not guarantee the damages or risks caused
by inadequate operation or beyond product specifications.
That means its up the user to determine if they want to try/risk the OC condition. No stability is guaranteed. Every manual states that OC is not recommended and at your own risk, possibly voiding the guarantee. How much more should the manufacturers do in terms of stating what is regarded as OC and that its risky? All the P45 chipset boards with DDR2 state the same in terms of 1066 being an OC, no matter from which manufacturer.
Yes, with tweaking some are lucky to run at the OC speeds, but probably above the chipset, Ram and CPU recommended voltages. The more memory you add the more stress on the memory controller and subsequently an increased chance of instability, especially at the OC speeds.

The Opration timed out occurred on calling REST Service in Addin in windows 7 ultimate 64 bit

Hi,
I have created VSTO solution for Outlook Addin in Visual studio 2010.
In that on button it will call Java REST webservice and validating the username and password.
Evrything working fine in few systems.But it showing "The operation timed out" in WIndows 7 64 bit office 2013.
In other windows 7 machine with office 2010 and 2007 its working perfectly.
Below is the code :
var responseMessage = (String)null;
var request = WebRequest.Create(string.Concat(serviceUrl, resourceUrl)) as HttpWebRequest;
if (request != null)
request.ContentType = "application/xml";
request.MediaType = "text/xml";
request.Method = method;
request.keepalive=false;
request.ContentLength = xmlRequestBody.Length;
ServicePointManager.Expect100Continue = false;
//var objContent = HttpContentExtensions.CreateDataContract(requestBody);
if (method == "POST" && xmlRequestBody != null)
byte[] requestBodyBytes = ASCIIEncoding.UTF8.GetBytes(xmlRequestBody.ToString());
request.ContentLength = requestBodyBytes.Length;
using (Stream postStream = request.GetRequestStream())
postStream.Write(requestBodyBytes, 0, requestBodyBytes.Length);
if (request != null)
request.Credentials = new NetworkCredential("Username", "password");
//request.ProtocolVersion = HttpVersion.Version11;
var response = request.GetResponse() as HttpWebResponse;
if (response.StatusCode == HttpStatusCode.OK)
Stream responseStream = response.GetResponseStream();
if (responseStream != null)
var reader = new StreamReader(responseStream);
responseMessage = reader.ReadToEnd();
else
responseMessage = response.StatusDescription;
return responseMessage;
Could you please help what could be the reason.Any firewall issue or any serviced related issue.Kidly suggest.

Hi,
I have created the windows application using REST Service and tested the application on
windows 7 64 bit Ultimate edition but I'm getting the same error "The
operation timed out" attached the screen shot for your reference.
http://www.screencast.com/t/YeIJxl383a
I developed the application on Windows 7 Ultimate 64 bit version it is working on my machine. while the executing exe on another windows 7 64 bit Ultimate
edition which is on the virutal machine Im getting the error.
There is no visual studio installed on the Virtual machine , i have installed the Dot Net frame work 4.0 client profile on the virtual machine.
Could you please suggest is there any issues related to opearating system or related to framework.
Kindly help with some suggestions.

Is Audition 3.5 compatible with Windows 8.1 64-bit?

Is Audition 3.5 compatible with Windows 8.1 64-bit? If not, is there an upgrade that is compatible that does not require subscribing to Creative Cloud? I only need the standalone software to edit my music.

install using compatibility mode.

Windows 8.1 pro 64 bit - finger print not working (sony viao 15126pab)

http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/windows-81-pro-64-bit-finger-print-not-working/664d9ca8-a0ea-479f-851d-3631e3c1404c hi i am using sony svs 15126pab  2 days before firefox hanged so i forcefully shutdown the system , after rebooting fingerprint not workingthen i go to device manager i found biometrics working properly , 2, 3 times restarted then also finger print not working, then i checked the authentic true suite " its giving error message box and closing every times then i uninstall authentic true suite and installed again ,it asked registration and i registered but i didn't see the finger enrolling options in the software . i enabled biometrics options in administrative templates (components) , other options also enabled in services restarted , reinstalled from Sony Store - nothing helps..................... please help me ,,, i cant enable the add option of fingerprint in sign in options in settings.. the add option is like deactivated , no biometrics tool in control panel, no fingerprint enrolling option in authentic true suite . i purchased the system with windows 8 pro then upgraded to 8.1 now its reserved to windows 10 . so pls give me some solutions to rectify this problem

I cant access any printers, not even the virtual printers.
What I would do is use ProcMon to find out why that Event entry was written. Then I imagine I would get a clue about a .dll which might be involved, which hopefully might be registerable. Since IE9 there have been new .dll involving printing
which have not been reflected in any of our repair tools. However, instead of modifying our old scripts to reflect this fact, I have been advocating, so far unsuccessfully, that Microsoft create a proper IE Repair tool, one which does not rely on such
unreliable techniques.   E.g. a better method of repairing would be to have it done by a proper troubleshooter (an .msdt file) but so far it seems nothing has been done in that way for these symptoms (again, assuming the cause is registry corruption
and not simple interference from now incompatible third-party programming--the fix for that would be to identify and remove the incompatibilities.)   For example.
Robert Aldwinckle

Problems with Fingerprint Reader on Touchsmart TX2-1274NR Notebook and Windows 7 Ultimate (64-bit)

I have just upgraded my tx2-1274nr to windows 7 ultimate (64-bit) [my university released the upgrade a week early] and I followed the directions provided by technical support and downloaded/installed all the updated drivers and software. Everything works great (actually better than great) except for two problems.
The fingerprint reader does not work. It shows up in the device manager, but when I try to register a fingerprint, Windows says no reader found.
This problem is not really effecting the performance, but it states on the device stage that I am missing a driver for the keyboard filters? I am not sure if this is important.
Any assistance would be greatly appreciated. I am really loving the new system, especially the multi-touch (installed the drivers from N-trig)!!
Thanks

Hi,
dclane wrote:
The fingerprint reader does not work. It shows up in the device manager, but when I try to register a fingerprint, Windows says no reader found.
Check this and this thread. You need Authentec TrueSuite.
dclane wrote:This problem is not really effecting the performance, but it states on the device stage that I am missing a driver for the keyboard filters? I am not sure if this is important.
If You have any version of Quick Lunch Buttos installed uninstall them and install this here which is provided by HP for Win7.
Message Edited by Daniel_Potyrala on 10-16-2009 12:35 AM
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Installing Windows 7 Ultimate 64-bit with Boot Camp

I am using a 17" MacBook Pro with and Intel i7 2.66 GHz processor, 8GB 1067 MHz RAM and a 7200RPM 500GB hard drive. I am trying to install Windows 7 Ultimate 64-bit via Boot Camp. I do what Boot Camp tells me to do, but when my MacBook Pro restarts to boot from the Windows 7 disc, all I get get is a white screen! I have tried to boot manually from the Windows 7 disc, but it won't boot. It freezes on the white screen and I have to reboot the Mac using the Mac OS X partition. How can I fix this ASAP so I can install Windows 7? I need to get it done TONIGHT!

I'd recommend posting this in the Boot Camp forum, this is a general MBP forum.
Regards,
Roger

I have a copy of PS CS5 Creative shop which was causing some difficulties with my computer Windows 7 Ultimate 64 bit. I cancelled the activation of my CS5 and uninstalled. When I tried to reinstall the message showed :"missing file unable to initialize" w

I have a copy of PS CS5 Creative shop which was causing some difficulties with my computer Windows 7 Ultimate 64 bit. I cancelled the activation of my CS5 and uninstalled. When I tried to reinstall the message showed :"missing file unable to initialize" what do I do.

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

HP 550 with window 7 ultimate 32 bit- microphone is not working

Similar Messages

Maybe you are looking for