HP 5510xi All-In-One Printer Not Feeding Paper

I was printing a document and the paper got jammed.  I removed the back panel to release the jam, but now the paper does not feed through.  When I try to print something the printer acts as though it will print but it makes a sound just like when there is no paper in the tray and then a "Out of Paper" shows up on the screen. 
I have tried unplugging it and re-plugging it to get it started again. But that didn't work.  I cleaned the rollers and that didn't work either.  I went through several things listed on the troubleshooting screen, but it still doesn't work.
If anyone can help me, please do!  I have several cartridges that I have not opened and would go to waste if I cannot fix this printer.
Thanks

Unplug the power cord from the wall and the printer for 5 minutes.  Plug back in and turn on.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • All in one printer not printing on windows 8.1

    Hi my HP deskjet 3520 all in one printer used to work then i upgraded to windows 8.1...now it won't print...it shows as a printer in the devices window but does not show up when you ask to print...or sometimes it does but then a pop up window says there is no printer....i have reloaded the software a number of times and it all says it is connected to the wireless network....help please

    Give this tool a try, it might help the printing - http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03286146

  • HP Photosmart C7280 All In One printer not campatible with windows 8.1

    I have an old Photosmart c7280 all in one printer.  I bought a new computer that has windows 8.1.  HP doesn't
    have software or drivers that can make this printer compatible with my new computer.  What can I do besides buy a new prfnter?

    Hi,
    Please download the following Software and Derivers and install on your new Windows 8.1 machine:
        http://ftp.hp.com/pub/softlib/software12/COL30662/mp-110038-1/PS_AIO_02_Net_Full_Win_WW_140_408.exe
      Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP PSC 1410 All in one Printer not installed

    In windows 8 after complete and lastest installation of Driver of HP PSC 1410v All in one, in the Control Pannel, Device and Printer Tab only scanner icon is showing no any printer icon and no other HP Icon, so i can use scanner only of this model but not printer. After reading suggestions I install the windows 7 driver in windows 8 after solution of fatel error here is also only scanner is showing no facility for printing, please help me where I am wrong or whats solution fast plzzzzzz.

    Hello Jai_pareek,
    Welcome to the HP Support Forums! I see you would like to install your HP PSC 1410 to your computer running the Windows 8 Operating system. You tried downloading the Windows 7 driver but are now getting a fatal error. Please go ahead and start with the steps listed below:
    1. Unplug the USB if using a direct connection.
    2. Remove the HP PSC 1410 software from your computers Control Panel's Uninstall a program option.
    3. Restart the computer.
    4. Make sure ALL the PSC 1410 software is gone from the programs list as well as your HP folder listed under the All programs in your Start Menu.
    5. Now go ahead and download the software and drivers for your PSC 1410 (DO NOT plug in USB until the software prompts you to):
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=al-110055-2&cc=us&dlc=en&lc=en​...
    6. Go ahead and print a test page.
    7. If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    Please let me know if this was successful! I will watch for your reply.
    Thank you,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HP Officejet 6210 All-in-One, print custom sized paper

    I need to print on  size 3 3/4 x 8 1/2 paper.  I click on custom size, then format the size, but it always reverts to 8 1/2 x 11.
    They suggested I go to the chooser to choose the Officejet 6210, but it is not one of the choices.  Is there another choice that would be compatible?  I'm on a deadline to print my daughter's wedding programs...any help would be appreciated!
    Is there something I could download to update my printer so it could print on this size paper?

    Yes, but it is hard to get working and only supports printing, not scanning.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HP 4215 all in one 'printer out of paper' error message

    I cannot clear out a 'printer out of paper' error message that is prohibiting me from printing further documents.  Paper is in holder accurately, I've even copied to ensure it is feeding.
    My 'wonderful' son had a 20+ document sitting in the queue that I am sure triggered this error.  I've got the queue cleared but still cannot clear the error.
    Please help!!??!!

    I'm having the same problem...but hey, isn't it wonderful how quickly HP support jumps on these issues and helps us fix them????????

  • HP 6500 officeject all in one printer not printing black ink

    HI there, every time I install a new cartridge, I go through all of these steps and end up purchasing another set of ink because I exhausted all of the ink by cleaning the cartridges. I don't understand and wish that I would receive a refund for all of the ink I have purchased with no resolve. At 68.00 a pop, back to back, I am a little frustrated. I still have the same problem of black ink not printing. HELP! I have done everything to trouble shoot the problem!

    Hi @sunnybaby 
    I appreciate the troubleshooting you have done thus far, and completely understand your frustration. There is something else I would suggest trying, if you have not done so already.
    My own personal recommendation, not one of HPs, is to use the solution offered in the following video.  I only suggest doing this if he printer and printhead are out of warranty.  Hot Water Printhead Flush - HP Ink Series Printers with removable Printhead.
    I have recommended this solution to others and have seen success, but I can not guarantee this will resolve the issue, it is an end of the line kind of effort. I hope it helps.
    PaganC wrote:
        flushing it worked, Yeah!!!!!!! thanks for your help.
    Although the printer might be out of warranty, if the issue persists, HP may be able to offer you something. Maybe they can offer you a discount on a newer model, or discuss the option of replacing the printhead!  If after all of our efforts the issue remains, I suggest calling HP. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
    Thanks for reaching out to the HP Forums. I hope one of my recommendations resolves the issue.
      - In support of Movember
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HP PSC all-in-one printer not working

    I reinstalled the driver cd disc, rebooted, corrected the printer default connection.  I've unplugged everything.  Printer doesn't work. It just stopped, but then sometimes it will print.  Never jammed.  I use power surge protectors high quality.  All network connections working.  I can hear the printing but nothing prints.  Printer will print self-test but that's it.  I noticed that the model number for the printer may not be correct in properties but can't figure out what the model is and how to correct the entry.  Hmmm -- any ideas please? 

    According to http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&product=3 74575&sw_lang=&os=219&#N701 there's no software, but only a driver that supports SL printing, but not scanning.

  • Hp psc 1200 all in one printer not working

    I reformatted my disk after downloading Yosemite, as some programs were very slow to respond.
    My colors in laptop MacBookPro were washed off!
    Now after downloading new Yosemite software, my printer is not getting recognised!
    Drivers from HP site don't work too.
    Any good advice is required.
    Thanks

    According to http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&product=3 74575&sw_lang=&os=219&#N701 there's no software, but only a driver that supports SL printing, but not scanning.

  • HP 2170 All in one printer not powering up.

    Hi
    I have a HP2170 series printer that will not power up when the on/off button is pushed.  Is there anyway to reset this printer and/or is it susceptable to mains glitches?
    Regards
    Bernad

    Unplug the power cord from the wall and the printer for 5 minutes.  Plug back in and turn on.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Deskjet 3520 e-all in one printer not printing black ink

    I just installed a new hp 564xl black ink cartridge with an expiration date of 01/30/2017. Low and behold the black  is not printing and the printer was purchased in 08/2012. I did everything that was suggested in the support forums and to no avail did anything work. The three other colors print out fine except the black. Based upon everyone's answers I guess there is no repair for it and I should scrap this unit after three years of constant use. I would think by now there would of been a solution posted to this problem but Hp has failed us. I've been using HP printer products since I purchased my first computer in 1992 and never had a problem with them until now.  My second printer which was purchased in 2004 is still going strong, except that it is not wireless. If I need to purchase a new wireless printer, I'm sorry to say that  I might have to look at the competition. If anyone knows of a solution I would appreciate it. 

    The post here has links to a troubleshooting document for the Deskjet 3520.  If the steps there do not resolve the issue please contact HP Support, even if the printer is no longer under warranty.   If the above does not give satisfactory results then please post back here and mention the country you are in. 

  • I have a C309g Photosmart Premium All-in-One printer that the paper transport mechanism rumbles

    My computer operating system is Windows XP
    An error message "Remove Paper Jam" occurs when I am trying to print even when there is no paper in the printer. It also rumbles as it scans a document to the computer but it takes almost 3 times longer than normal to scan. I have checked the printer and duplexer for a paper and they are clean.
    Nothing was changed to the computer, printer or operating system.
    It sounds to me like the gear bearings need lubricating.

    Hi,
    HP has an HP Hardware Diagnostic Utility that might help resolve the issue you are having.  Here is the link to download the utility.
    HP Hardware Diagnostic Utility
    Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
    I am employed by HP

  • Hi I have a HP Photosmart Premium C309 all in one printer that wont pick up paper

    My all in one printer stooped load paper from the main tray. I can't see any paper jammed anywhere. I'm stumped ... any advice would be appreciated.
    This question was solved.
    View Solution.

    The troubleshooting steps in this page may help.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Psc 1315 all-in-one printer will not feed paper. There is no paper jam.

    psc 1315 all-in-one printer has stopped feeding paper. There is no paper jam.

    hi there sorry to learn that you are having this issue.
    Are you still facing this issue? If you are I will do my best to help you.
    Have you upgraded the firmware of your printer lately; you can get the latest firmware in the main support page for your printer 
    This is the main support page for your printer,  GO HERE Go to software and drivers download and select your operating system. You should also upgrade the firmware of the printer.
    If you are not experiencing this issue any longer,  May you let me know, your time and courtesy,
    will be deeply appreciated.
    Regards;
    RobertoR
    remember ==▼
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are a problem

    HP Photosmart 2610 All in One Printer   Paper feeds OK but the software and sensors are not allowing paper to feed until several steps are taken first.
    (I am using Windows 7.  I also use the virtual XP mode and mostly MS Office 2003 docs). 
    I have had this printer for several years and love it.  Before I toss it out, I thought I would check if I could get it to work properly before I buy another printer.  Note: I did put in a new HP black cartridge (because it was out of ink) but the printer was not working properly for several days before I changed the cartridge. The printer was at step 5 before ink change.
    Lately, each time I turn on my printer, I have to go through the same routine
    1. The printer wants to align the cartridges so I push OK
    2. The paper feeds into the printer and stops at the exact place to start printing.
    3. Error message appears that it is out of paper.  So I press OK to continue.
    4. It says "aligning print cartridges" runs through 2 sheets of blank paper without trying to do anything and then states "cartridge alignment failed"  "Press OK to continue"
    5. Screen is now normal and it appears it is going to work.
    6. It makes no difference if I used the copy function OR when I send a print job from the computer, the paper feeds into the printer and stops at the exact place to start printing but nothing happens.
    7. Error message appears that it is out of paper. OR that it is the wrong size paper.  I pull the paper that was at the proper place to be printed from the printer and then the error message says "Paper jam.  Press OK to continue"
    8.  I press OK.  The printer will then quickly feed in and eject 2 sheets of paper before it will actually start printing the print job.  It will work fine after this as long as I print from the same document.
    9. If I want to print a different document then I have to start all over again at step 6 to get the printer to work.  If I shut the printer off I have to go back to step 1.
    What I have already tried
    A.  Uninstalled and reinstalled the printer driver direct from HP web site.  I have done this several times with both the basic driver download and the complete package download.
    B.  I have done a partial reset by unplugging the printer, and then re-plugging the printer while pushing the  "# and 3" buttons while turning on the printer.  I have done this several times.  Each time it will work fine until I try a different document of turn off the printer.
    C. I have downloaded the HP Print and Scan Doctor and used it several times.  It states that "everything checks out OK"
    D. I have downloaded the HP Hardware Diagnostic Utility 4.0 but it does not work with my printer.
    E.  I have cleaned all the rollers and blown air throughout to make sure there were no bits of junk in the paper's path or blocking a sensor.
    F.  I have tried different brands and weights of paper (all 8½  x 11) but nothing works.
    Most of the problems started when I added the printer to the virtual machine so I could print XP files.  This may just be a coincidence because the printer has the same problems when I use the copy function without the computer being on.
    Thanks for looking at my issues.  Any help would certainly be appreciated.

    I just tried using Notepad as you suggested and had the same result.  Paper feeds in stops at proper place and error message "out of paper" 
    I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem. 
    I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner.  One for black and one for color.  The ink icons would change from completly full to just an outline as the amount of ink went down.  Currently the black ink icon is missing
    This is a very frustrating problem because the printer works great after doing a few steps to get around the problem.  The fact that the problem reoccurs any time anything is changed is the major problem
    Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs.  This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
    I want to thank you for all of your efforts.  Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer.  As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

Maybe you are looking for