Hp 5520 keeps moving into paused mode when asked to print
how do I reset paused mode on my hp 5520photosmart all in one printer?
Hi fulmar,
Thank you for visiting the HP Support Forums! I understand when you print to your HP Photosmart 5520 it keeps going into paused mode.
First I would like you to run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Now take a look here at this helpful video: Is your printer paused or offline?
If after running the PSDR and making sure the printer is not paused you are still unable to print. Continue here: 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print
I will watch for your reply, please let me know the outcome.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!
Similar Messages
-
My ipod nano is fully charged and while playing will automatically go into pause mode as the light starts to dim it eventually stops. If I touch the screen before it blacks out it will continue to play. It will play continuously if I am charging it into an electrical outlet
I have the same problem with my new nano. On one forum, there was a recommendation to restore, which will wipe all the music. A second forum suggested the was an inherent problem in the 1.1 firmware and suggested a roll-back to 1.0, which sounds painful as well. Any clarification will be greatly appreciated
-
HELP my ipod keeps going into restore mode
hi i have a problem with my ipod touch 2nd generation firmware 3.1.2. it keeps going into restore mode randomly when i play with ir or use it. i upgraded and downgrade and nothing seems to work. i think there is a problem with the hardware!
oh and when i bought it there was a problem with the headphone jack(brand new)
and nobody would help. i had warranty to. we live in a cruel world. =(Yesh, take it to the Apple Store and make a fuss.
-
HT201401 My phone won't lock or go into sleep mode when answering calls
My phone won't lock or go into sleep mode when making or receiving calls. Consequently I keep activating the mute or loud speaker buttons with my cheek. Can anyone help please??
That is a Proximity Sensor Problem, which is located above the earpiece speaker. Do you have a new screen protector or iPhone Case which could interfer with this?
Reset iPhone, Restore iPhone.
If you have Warranty or AppleCare Coverage make Genius Reservation and take iPhone to Apple for resolution. -
My new nano keeps going into sleep mode every copy of minutes while music is playing. I can't figure out how to stop this. The user guide isn't too helpful. Any ideas?
This is usually a sign that your iPod's headphones are not plugged in all the way. Make sure that you cannot see any of the silver still showing from the headphone's plug. You should hear a sort of popping/clicking noise when inserting the headphones letting you know that they have been fully seated.
B-rock -
iPhone 4 went into recovery mode when trying to restore it. Now the only option iTunes allows is for "restore & upgrade", it is not offer an option to restore from a backup, says that must first do the upgrade, when attempting to do the upgrade the iPhone won't accept it.
How can I restore from a back up in recovery mode when the only option is "restore and upgrade"?
Please help.You don't you must restore your phone first and then you will have the option to restore from your backup.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support -
My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.Help please!
Hello chindeepchow,
Thank you for using Apple Support Communities.
For more information, take a look at:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694#3000
Resolve communication issues
Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
Have a nice day,
Mario -
hello my mac mini didn't go into sleep mode when i am using an optical thunderbolt cable to my thunderbolt display
has any body els this problemHello josfromkerkade. Please contact me so that I can get more details.
We'd like to understand which monitor you're using, how old it is, which Thunderbolt port you're using (tethered cable or TB port), & the version of firmware.
[email protected]
Thanks, Mitch -
After updating to itunes 10.4 restarted my pc windows 7 64 bit, my ipod touch 3rd gen went into restore mode,when trying to restore it works for several minutes then says it cannot be restored, unexpected error occured (1604) I have followed the reslution checklists, still wont work, any thoughts?
Hi
Cannot offer any thoughts other then i am having the same problem. updated my itunes windows7 32bit ipod touch 4th gen. went into restore mode lost over 700 songs. i dont get any error messages i just cannot get into itunes store. Firewall is allowing access, etc resolution checklists done, and nothing.
Hopefully this issue is fixed up soon... -
I am running OSX Lion 10.78.4 and the computer will no longer go into sleep mode when I close the cover. In system preferences I can no longer find the option that allows for this energy saving feature. What happened to this option and why is this no longer happening with the latest version of Lion?
No external monitors or devices attached. When you mention that this function only works when devices are attached that is true when you set up your preferences that way. Up until my upgrade to Lion the computer would always go into sleep mode when I closed the lid. There also used to be an option to check in system preferences that allowed you to choose this option. My question for the discussion is what happened to that option and how do you get the computer to sleep or at least the display to sleep when you close the lid as we have been able to do in the past. Thanks.
-
IPhone 5 going into recovery mode when trying to update iOS 7
My 5 went into recovery mode when trying to update to 7.0.2 OTA. At first I was like ok just a glitch. Well trying to update to 7.0.3, it did it again. So right now I am again in the process of restoring and updating my 5.
What is going on?because I'm an idiot.. of course.. All my other over the air updates have worked, I had a good wifi connection, knew I had a backup, and was desperate to get past the initial bugs I've been experiencing..
I downloaded iTunes on my work PC, enough to get it going again, which I bascially had to do twice.. iTunes didn't find a backup and said that iCloud didn't have a backup, even though it did.. So, it did a basic install of iOS 7.. I then erased all settings from the iPhone itself and when it restarted I chose to restore from iCloud which the phone was able to find..
Have not seen anything better.. I've had a couple random reboots. Once when swiping the Starbucks notification on the lock screen, the phone immediately crashed back to the apple boot screen. -
I have a MAC OSX 10.6.8 Is it better to keep it in sleep mode when not in use or shutting down?
Mac OSX 10.6.8 Should I keep it in sleep mode when not in use to shut down?
My experience with electronic tends to revolve around thermo stress, and removing all power vs going to sleep tends to be more or less the same. Many components have power totally taken away, and others use so little power they cool off.
However, I found thermo stress occurs a lot more with discrete electronic components (like back in the '80s and our VAX-11/780's which had lot more discrete components) and less with integrated circuits. NOTE: I'm not talking about overheating components, just normal heating/cooling cycles.
All in all I would not worry about it. The OP (Grace 1) should use whatever method is most convent for her. And I would say if she is using a Macbook Air or the new Macbook Pro Retna display (or any other Mac with a solid state drive (SSD)), then booting from shutdown may not take all that long anyway. -
Firefox keeps switching into Safe Mode, necessitating restart
Firefox keeps switching into Safe Mode, necessitating Mac restart to get my extensions back. I'm fed up! -- I keep having to shut down umpteen apps to restart.
Thanks for any insight,
peter wilson (Montréal)Can you give a description of what you call "Safe Mode" From my reading, the "Safe Mode" is something added on by a specific tool used to Jailbreak an iPhone. Unless you are talking about something different.
-
Mac keeps booting into Recovery mode
HI,
my macbook pro mid 2009 keeps booting into recovery mode,
if I select primary disk in recovery mode or at boot holding shift it quickly showes crossed out circle instead of an apple at boot screen than boots into recovery mode again.
I have repair permessions, repaired disk (no errors) and reset pram but no luck.
Is there anything alse I can try?
Thank you.Looks like some files might be damaged. You will likely have to reinstall the operating system. I hope you have a back up of your data.
-
My iphone 5 got suddenly slipped into recovery mode when i was updating my phone with the latest update. I request the officials to act fast and come up with a recovery solution because the phone is unable to get restored on itunes due to "error 3" when ever i am trying to restore and neither of the istores have the solution for the same.
Hi, Milanista5
Thank you for visiting Apple Support Communities.
When experiencing issues restoring or updating an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
iOS: Troubleshooting update and restore issues
http://support.apple.com/kb/ts1275
Cheers,
Jason H.
Maybe you are looking for
-
General Warning! [Ralink chipset + Windows 7 64bit + 4GB RAM = driver crash]
I just wanted to put a general warning out there. There seems to be a pretty big problem with Ralink drivers right now, even ones automatically downloaded from Windows Update for at least 3 Ralink Chipset groups. The problem: There's some kind of mes
-
Using iPhone (4S): FROM iPhone, how to erase songs from iphone and itunes simutaneously
Can it be done? Thank you. P.S.: I love iPhones. New to it. Tried all the rest.
-
With the upcoming launch of CS5 and the Mercury Playback Engine, this may be interesting. Side note: We do not yet know whether FERMI cards will be supported. The GTX480 has simply the fastest GPU. An average speed gain of about 15 percent from the H
-
Erratic pointer movement w/ Illustrator
I work a lot with Photoshop and Illustrator and have noticed that my "pointer" is errantic when trying to select and/or move vector points in Illustrator. The only way to eliminate this problem is to go into System's "Accessibility" icon and change m
-
Hi my son cant seem to connect to itunes on his ipod although yesterday it was working a few days ago. Any advise? We downloaded a new game onto it yesterday through itunes on the computer but with it being unable to connect to itunes it wont load up