HP 5610v- Paper out light continually flashing

My printer has the paper out light continually flashing with plenty of paper still in the tray. If anyone knows a fix please post it or send me an email. My address is [email protected]
Thanks
klbilly

what is the exact error message on the display of the pritner? what happens when you press OK or the Cancel button?
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Similar Messages

WRT54G Router - All lights continuously flashing?

This morning my WRT54G's lights (link/act, Full/col, 100) were continuously flashing on and off simultaneously and I'd lost all network connectivity. I've not made any changes (firmware) to the router for about 1 year, and it's been working fine. I've pulled the plug on the router and when the power's back on, the lights go out but still no connectivity.. after a while all the lights start flashing. I'm just wondering if I need to buy a new one
Laurent

Quite right! The old adapter says the output is 5v and I do have another lying around.. my router is up and running thanks for the tip.
Laurent

The Time Capsule light continues flashing yellow.

The machine seems to be working fine with the wifi and backup systems. I reset the wifi and the light stopped flashing and was green for a couple of hours, but then started again. Tried a second time with the same outcome. Any ideas?

If you have not already done so, you will need to download and install the full featured version of AirPort Utility 5.6 for Mac OS X Lion
Then open Macintosh HD > Applications > Utilities > AirPort Utility 5.6
Click Manual Setup
Click directly on the word Status (2nd line) and a window will open to explain why the Time Capsule is complaining....along with suggestions to remedy the issue. It might be something as simple as a message that an update is available for the Time Capsule.
Suggest that you keep both AirPort Utility 5.6 and 6.0 on your Mac. (You cannot delete AirPort Utility 6.0)

Magic Mouse continually flashing light

We have had our Imac and magic mouse for a fortnight and we are experiencing problems with the Magic mouse!! It dropped on the floor earlier and the batteries fell out...since putting them back the light on the back is continually flashing and it does not appear to be making any connection to the Mac. We have tried changing batteries in case, have gone through system preferences etc on the menu and nothing appears to be working.
Any words of advice would be greatly appreciated.

You are my hero!!!!
I have had exactly the same problem with my mouse. green light underneath the magic mouse double flashing. No connection to my iMac.
Took the mouse back to the Apple store and they tested it and swapped for a new one (can't complain about customer service there, very good).
Still didn't work though when I got back home.
Just tried what you said, deleted the mouse from the list and re-added it - it works!!
Thank you.

EA6500 - stopped working continuously flashing light

I have to say that I am greatly disappointed in this wireless router. This is the second time that this has occurred in less than a year. The only difference is that the first time (mid May) it corrected by itself.
Problem:
The first symptom is that there is a loss of internet connectivity, so we go up and check the router and unplug it. Initially thinking that there is also a problem with the broadband modem, we poweroff the modem as well. But, recycling the power doesn't resolve the issue.
We turn everything back on and the router goes through the startup cycle then just goes into a continuous flashing mode.
I have attempted to use the reset button to return to reset the configuration, without success.
I have left it off for long periods of time and then attempted to restart it.
I have tried turning it on both connected and disconnected from the broadband modem.
There is now no response from this device.
In the past 12 years, I have owned 2 different dlink wireless routers, and neither failed the entire time that I used them. The only reason that I swapped them out was for greater functionality and speed improvements. A router that is less than a year old should not go belly up. Cisco should be ashamed to put their name on this device. I currently manage the global infrastructure for a 1.5 billion Euro company, and we have standardized on Cisco hardware. This is not even close to the same product quality.
On an entirely separate soapbox, I object to the fact that the entire configuration and management is hosted in the internet. Not very smart, if you loose internet connectivity, you no longer have a LAN.
Perhaps you can suggest what other alternatives I have besides discarding the device.

You might need to check if the router was using the correct power adapter. You could also try to reset the router (either the 30-30-30 reset or the 1 minute hardwire) and then power off the router afterwards. In case the router’s power light does continuously blink then, try to follow the steps from this link: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=a72f05de8a5f4a789db726d535ea68cb_KB__EN_v1.xml&pid... . If in the event that the router’s power light will still be blinking then you might perhaps consider to have the router returned and to have it replaced.

Select 360 printer: Paper Out LED flashing

Hi,
My trusty Select 360 is refusing to print; the Paper Out LED is constantly flashing. My research on this topic seems to suggest that there is a problem with the logic board.
A colleague had a problem with his Select 360 printer and no longer uses it. He has offered me his logic board as a replacement.
Will replacing the logic board fix the problem and, if yes, is it hard to do???
Thanks in advance,
trmartin

I ran the diagnostics. I got all 4 LEDS which means nothing wrong. I then ran the printer normally, and I could print a document right after it had switched on, but after the document had printed, I got the two flashing yellow lights again.
Also, when I ran it in diagnostic mode, it only printed one page, rather than two, and that page had nothing on it.
I am just running the diagnostics again...
Right. On-Off-On-On. Which is fuser assembly error. I though it might be something like that because most of the solutions to the two flashing lights seem to be doing something to the fuser.
So it seems to be a tempramental fuser.

HT204400 Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen

Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen with no sound and no picture. Does anyone know what is wrong?
l have an apple tv 2 generation please help me

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

Thanks for your response
Let me give the history - I started with an Apple Express being fed thru a D-Link EBTR 2310 cable Router from an RCA DCM315 Modem (Pure). Comcast service all the way.
Got the 1st generation TC in 2008 and merely replaced the Airport Express with the TC. Worked ok
A year or two ago I did try removing the modem and feeding the TC directly from the modem. Resulted in the same condition I have now - Continuous flashing amber on the TC. So I put the router back in the chain.
Some time later, at the recommendation of a Comcast rep, I replaced the router with (a Belkin F5D 5231) to see if speed and dropout problems would be improved. I thought it helped some at the time but now I am not so sure.
Last week I decided to see if a new modem would help with download speeds. So I got another pure cable modem (Motorola SB 6121- high on the Comcast recommended list).
Got up and running easily with Comcast help and with the modem connected directly to a computer.
Next I put the TC in the link and again could not get past the TC continuing to flash amber. Although I did get connected to the internet with this configuration I lost connection two both of my printers - one connected by USB and the other wirelessly to the TC. Again everything works fine when I put the Belkin router back in the system.
However with the router in there, the modem shows the downstream connection to be 10/100 ethernet speed. (Modem light changes color for indicating speeds.}
I have gone thru all of the combinations of powering down/ up, but all stays the same.
I can live with what I have but something still doesn’t seem right.
Thanks again

My light is flashing on my apple tv after the power went out how do i fix the problem

my light is flashing on my apple tv the power went out then when it came back on it began flossing what do i do

See Apple TV: About the status light - Apple Support

Hp psc 2110 all-in-one -best, normal fast lights just flash continually

My hp psc 2110 all-in-one I have had for a number of years and has never let me down before.
The problem started when I tried to print from a PC on my home network. The request was on the queue but wouldn't print and the 3 lights for Best, Normal and Fast Quality just flash continually.
I also keep getting a window come up entitled HP OFFICEJET REFLASH asking for the original setup disk.
I have responded and put the CD in the drive.
I have uninstalled the program and reinstalled a download from HP.com website but still the lights continue to flash.
Can anyone help PLEASE!!!!!
Best regards
The Mole
[email removed for privacy reasons]

My hp psc 2110 all-in-one I have had for a number of years and has never let me down before.
The problem started when I tried to print from a PC on my home network. The request was on the queue but wouldn't print and the 3 lights for Best, Normal and Fast Quality just flash continually.
I also keep getting a window come up entitled HP OFFICEJET REFLASH asking for the original setup disk.
I have responded and put the CD in the drive.
I have uninstalled the program and reinstalled a download from HP.com website but still the lights continue to flash.
Can anyone help PLEASE!!!!!
Best regards
The Mole
[email removed for privacy reasons]

Officejet 6100: yellow light continues to flash after new cartridge installed

Printer won't print and yellow flashes. I have reinserted the new HP yellow ink cartridge several times, bu the yellow light continues to blink and the printer still will not print. Help!

Hello there! Welcome to the forums @minnette
I read your post about the issues with the yellow ink cartridge you are facing with your Officejet 6100. My best suggestion to you, would be to try the steps from the document I have posted you below.
An 'Ink Cartridge Problem' Error Message Displays on the Computer
If the troubleshooting does not help at all, I would lastly suggest technical support.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Everytime I get thru to the point of extending the current wireless system I end up with an error and asks to retry. I have tried everything. Light keeps flashing amber. Any ideas out there

Installing Airport extreme to extend existing wireless system. I have airport Utility current. after getting to the point of extending the system it tells me there was an error and please retry. I am using my IPad and I phone with the utility and both don't work. I have internet via hard wire thru the AEBS and it does see the wireless signal but the big I shows up and the light still flashes amber. ( I am using an HP lap top and linksys router is main wireless station). Working on this most of the day, any help?

Please describe the changes you made in detail.. it is terribly hard to fix network issues remotely with vague general comments.
Was the TC, main router, bridged, connected via ethernet or joined to the wireless network???
What is the main router now..?? What is the wireless?
Do you have a direct connection to the TC by ethernet.. ?? If not you need one for setup.. plug ethernet to a laptop is easiest or remove the TC from the network and just plug it into the computer.. press and hold the reset for 10sec to get access.
Lion is hopeless network wise.. and you need to download the proper airport utility 5.6 before you attempt this.. so connect up by ethernet to the main router.. whatever that is and download the stuff you need before you begin.
http://support.apple.com/kb/DL1482

My power light continually blinks bu no error messages on PC

My Deskjet 3745, after several years of satisfactory operation has suddenly stopped printing. The power light constantly flashes, no error messages on my PC. No paper blockages, ink cartridges OK. What could it be? Will not print test sheets or any other diagnostic tools? Help!

Hi @jonathonleslie,
Welcome to the HP Forums!
I noticed that your HP Deskjet 3745 power light is continually blinking but no error messages are showing on the PC. I am happy to help you with this error!
Please see this guide, Blinking Power Light, I would also visit this guide, just in case. The HP Product Stops Printing and the Power Light Blinks or 'Mechanism Error' Displays on the Comput....
Hope these guides will help, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Officejet pro 8000 and the power and resume lights keep flashing

I have an officejet pro 8000 and the power and resume lights keep flashing. I initially had the problem when I put a new black ink cartridge in. Lately there was an error message on the computer saying pump stall error, which then culminated in a print head error. I have replaced the print head at an extra £40 I have replaced all the ink cartridges which say they are low even though I haven't been printing. Basically spent the cost of the printer again AND I STILL CANT PRINT! I'm using a Mac with snow leopard and I have reset the printer list and installed the new software and drivers. I have tried connecting with USB and Ethernet. I have filled up the paper. I have taken out the duplex and given it all a blow through. reset the print heads - basically everything the support web pages told me to do.
I have to say this is the worse printer I have ever had from HP. I always buy HP because of the quality. I have to say I feel unless this problem is solved with out me spending more money on it I will have to buy something else - and not HP ever! oh and the warranty is out by less than 2 months!

Welcome back burtf,
I am sorry to hear about the issue you are having with your Officejet 8500 showing a message for you to turn the printer off and on. I would recommend following the guide below for this issue.
I hope it helps!
'Turn Power Off then On' Message Displays on the Control Panel
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Happy Thursday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

.swf image comes out lighter than the source

I'm creating a simple animation in AE from a jpeg image. I bring up some text on the image. When I create the .swf file, the background that the text appears on is lighter than the original jpeg in the Safari browser. Since this animation "tiles" into the page with other jpegs sharing the same background image, the light background produced by the .swf stands out from the rest of the page.
This only seems to appear in the Safari browser under OSX. FireFox doesn't have this problem. However, since I need this to work across all browsers, I need to solve this issue.
If I make a .mov file instead of a .swf, it also appears lighter than the source.
In fact, if I simply take a jpeg image and create a 1 frame .swf from it, it comes out lighter than the original. I'm not doing anything to the image (as far as I know) that would make it lighter.
Any insight to what is causing this problem would be greatly appreciated.

It's ColorSync and how it is used throughout your system, even if only for on-screen Gamma correction. In so many words: There's nothing you can do about it but to reset your settings and turn it off wherever that is possible. Not on my Mac ATM and not using Safari anyways, but I'm reasonably certain there's an option for using the system color settings somewhere. Depending on how you process the JPEG you may also need to fiddle with the color settings for the Adobe suite. Flash itself is not color profiled, but it will respect embedded proviles by ways of its image loaders that it shares with Photoshop and al lthe other apps. Beyond that I wouldn't get too crazy over it: Color mismatches and shifting alignment are a natural bane of all web development, and even if you get it right on one machine, the next day another user will tell you that it looked crap on his machine in Konqueror on Linux.... More than anything else, webdesign is a matter of using the design to cheat around these limitations, unfortunately. Perhaps you can use a large background Flash file instead of the original JPEG and then put your HTML content onto a separate DIV layer...? ;-)
Mylenium

HP 5610v- Paper out light continually flashing

Similar Messages

Maybe you are looking for