HP 5650 Desk jet + OS 10.5: "Client-Error-Not-Possible"

I can no longer print on my hp desk jet 5650. The printer hangs up and displays the message "client-error-not-possible." (An older desk jet 950 works fine.)
If I open up the hp printer utility and test the printer it works fine. However, it won't work with any other application. There aren't any updated print drivers for this hp, and I think the problem is probably with one of the Apple updates to OS 10.5.
Does anyone have a solution?

Hello gc:
Try a couple of things (my HP printer works fine, but it is a different model).
Download the OS X 10.5.7 combo update and apply it.
Delete the offending printer and then reinstall it.
On a parallel track, contact HP tech support. I have had good success in the past and there may be a workaround or something else they can suggest.
Barry

Similar Messages

Operation could not be completed. client error not possible.

I have a mac mini running OS10.5.8. All of a sudden I can not print with my HP1315v all in one printer. I can print a test but that is all. I get this message. "Operation could not be completed, Client error no possible". I re-installed the HP software but that didn't help. I ran a permissions repair with Disk Untilities but that didn't correct the problem. Any help would be appreciated. :-) Dave

I can't help, because I'm getting the same ERROR suddenly with my Samsung ML-2010 laser printer. NOTHING will print and the "Status" of the print job(s) all show "Stopped". It's driving me nuts!
For some bizarre reason, I can still print to my other printer, a HP laserjet 2550L. It does not see to be affected in the least.
Anyone got any ideas for a remedy?

Get "client-error-not-possible" when printing to Adobe pdf 8.0

Problem suddenly appeared in Adobe pdf 7.0 when I upgraded to the MacBook Pro from an older ibook. I thought that there was a compatibility problem with 10.5. However, now I have done a new install of Adobe Acrobat Pro 8.0 and the problem still exists.
The "printer" seems to add normally, but as soon as I print, the printer stops. If I resume it and the job in the queue, the error message appears.
There must be some setting that I'm missing.

Hello lisagig and welcome to Apple Discussions.
I would be inclined to run a repair disk permissions first and if that doesn't help then I would reset your printing system. Note that this will remove all of your current printer queues so if you have a number of network printers in the list it would be handy to make a note of their network queue, which you will see via the Print & Fax > Options & Supplies > General pane shown as URL.
To add the PDF printer queue back, you will need to make the Advanced icon appear in the Add Printer pane. To do this, open Print & Fax and click to Add a printer. Control Click on the current toolbar (next to More Printers will be fine) and select Customize Toolbar. Drag the Advanced icon to the toolbar. Now click the Advanced icon. After a few seconds this pane will become active so you can select the Adobe PDF 8.0 (pdf) in the Type column. Every other column will autofill so leave them as they are except for the Print Using menu, where you will have to open, click 'Select a driver to use' and then type Adobe in the search window. This should show the 'Adobe PDF 3016.102'. Select this and click Add to complete. Now try printing with this new Adobe printer to see if the error has stopped.
Pahu

"Client error not found" = DOOOOOOOOMMMMMM!!!!!!!

Ok been getting this a lot recently and I think it is to do with my printer setup script. There must be a way to fix it, but for the life of me I can not find the solution.
It usually starts with all printers on the system being paused. You can unpause them, but as soon as you try print they automatically pause again.
You can reset the print system, but when you try readd a printer you get the message of doom "client-error-not-found".
From then on I can not add any printer to the system and the only fix is a wipe and reinstall.
I mentioned above that I use a printer script to install the 10+ printers in the office onto the 80+ machines. All the machines are running 10.5 and upto date.
I have put the script to have a look at, but even if it is causing the problem there should be a way to fix the issue.
#Reset print system.
do shell script "lpstat -p | cut -d' ' -f2 | xargs -I{} lpadmin -x {}" with administrator privileges
#log onto the server and mounts the IT_support folder. If the IT_support folder is already mounted it will skip the mount and move on.
if {"IT_support"} is not in paragraphs of (do shell script "/bin/ls /Volumes") then
mount volume "afp://192.168.1.251/IT_support"
end if
do shell script "cp -frv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/drivers/* /Library/printers/PPDs/Contents/Resources/" with administrator privileges
#Add the printers to the system.
#Colour Printers.
#Colour_Printroom Appletalk.
do shell script "lpadmin -p Colour_PrintRoom -L FirstFloorPrintRoom -E -v pap://*/Colour_PrintRoom/LaserWriter -P /Library/printers/PPDs/Contents/Resources/xrx7655.ppd -o printer-is-shared=false" with administrator privileges
#Colour_Kitchen Appletalk.
do shell script "lpadmin -p Colour_Kitchen -L First\\ Floor\\ Kitchen -E -v pap://*/DC3535_DC3535Print/LaserWriter -P /Library/printers/PPDs/Contents/Resources/Xerox\\ DocuColor3535\\ PS -o printer-is-shared=false" with administrator privileges
#BizHub Appletalk.
do shell script "lpadmin -p Colour_BizHub -L Colour_BizHub -E -vpap://*/X3eBizhub45035C-KMPrint/LaserWriter -P /Library/printers/PPDs/Contents/Resources/en.lproj/Fiery\\ X3eTY\\ 35C-KM\\ PS\\ v2.01\\ eu -o printer-is-shared=false" with administrator privileges
#Admin Printers.
#Reception Bonjour.
do shell script "lpadmin -p Reception -L Ground\\ Floor\\ Reception -E -v mdns://Reception%20%2892%3A1b%3A58%29.pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4500DT.gz -o printer-is-shared=false" with administrator privileges
#A3_Northside Bonjour.
do shell script "lpadmin -p A3_Northside -L First\\ Floor\\ North\\ Side -E -v mdns://A3Northside._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 5500DN.gz -o printer-is-shared=false" with administrator privileges
#A3_Southside Bonjour.
do shell script "lpadmin -p A3_Southside -L First\\ Floor\\ South\\ Side -E -v mdns://A3Southside._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 5500DN.gz -o printer-is-shared=false" with administrator privileges
#Studio3_Admin Bonjour.
do shell script "lpadmin -p Studio3_Admin -L First\\ Floor\\ Studio\\ 4 -E -v mdns://Studio3Admin._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4510DT.gz -o printer-is-shared=false" with administrator privileges
#Studio1_Admin Bonjour.
do shell script "lpadmin -p Studio1_Admin -L First\\ Floor\\ Studio\\ 1 -E -v mdns://Studio1Admin%20%2892%3A41%3Af6%29._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4500DT.gz -o printer-is-shared=false" with administrator privileges
#Studio3_A3 Bonjour.
do shell script "lpadmin -p Studio3_A3 -L First\\ Floor\\ Studio\\ 4 -E -v mdns://Studio3A3._printer.tcp.local. -P /Library/printers/PPDs/Contents/Resources/HP\\ LaserJet\\ 5100\\ Series.gz -o printer-is-shared=false" with administrator privileges
#Plotters.
#PlotterDeathstarHP4500ps Bonjour.
do shell script "lpadmin -p PlotterDeathStarHP4500ps -L First\\ Floor\\ Print\\ Room -E -v mdns://PlotterDeathstar_HP4500ps._printer.tcp.local. -P /Library/printers/PPDs/Contents/Resources/HP\\ Designjet\\ 4500\\ PS3.gz -o printer-is-shared=false" with administrator privileges
#PlotterPosterEpson7600 Bonjour.
do shell script "lpadmin -p PlotterPosterEpson7600 -L First\\ Floor\\ Print\\ Room -E -v mdns://PlotterPosterEpson7600.printer.tcp.local. -P /Library/printers/PPDs/Contents/Resources/en.lproj/stp-escp2-7600.5.2.ppd.gz -o printer-is-shared=false" with administrator privileges
#Copy a fresh copy of the printer driver settings back onto the system after the printers have been installed. driver settings are stored in /etc/cups/PPD admin rights required to copy files into this folder
do shell script "cp -fRv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/ppd/* /etc/cups/PPD" with administrator privileges
#Copy printer presets on to system.
do shell script "cp -frv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/presets/* /Library/Preferences" with administrator privileges
#The following printer is added into the system speratly due to a driver selection issue when adding more than one Xerox Phaser 4510DT. The system seems to apply the correct driver to the first one that is added to the system. The second Xerox Phaser 4510DT does not get the correct driver applied to it.
#Studio2_Admin Bonjour.
do shell script "lpadmin -p Studio2_Admin -L First\\ Floor\\ Studio\\ 2 -E -v mdns://Studio2Admin._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4510DT.gz -o printer-is-shared=false" with administrator privileges
#Copy printer presets on to system.
do shell script "cp -frv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/presets/* /Library/Preferences"
do shell script "cp -fRv /Volumes/ITsupport/01_Mac/04_Printers/PrinterAutoInstall/ppd/Studio2Admin.ppd /etc/cups/PPD/" with administrator privileges
#Reset file permissions
do shell script "chmod 664 /Library/Printers/PPDs/Contents/Resources/*" with administrator privileges

Well, I succeeded in solving the problem by myself ...
The problem was a local .cupsrc file containing some apparently wrong settings. Removing this file solved the problem ...

Can't delete printer - client-error-not-found

After messing around with the installation of a cups based network printer (via a local Suse server) I came across some strange problems with my printer setup utility. Currently, I can neither delete nor add a printer from the list for the current user. When trying to delete a previously installed network printer I get an error message that the printer could not be removed (client-error-not-found). When trying to add a new printer I won't get an error message, but the printer is not being added to the list anyhow.
I already tried to reset the printing system both with the printer setup utility and with the Printer Setup Repair Tool from Fixamac, both without success.
I have to note that for user root everything works fine!
Any suggestions?
Wolfgang
MacBook Pro Mac OS X (10.4.8)

Well, I succeeded in solving the problem by myself ...
The problem was a local .cupsrc file containing some apparently wrong settings. Removing this file solved the problem ...

CUPS error: client-error-not-authorized

Hello,
some days ago I followed the wiki and installed a printer (HP Laserjet 1020) that uses the driver foo2zjs (from AUR). It didn't print anything in the beginning, but after blacklisting usblp module it printed a Test Page. Believing that everything was working fine, I unfortunately did not try to print any other document to check it.
Now, trying to print a document for the first time, the printer simply prints nothing, and the log file shows this error message: client-error-not-authorized.
There's no network here and the printer is connected directly to the computer. Both the regular and root users are included in the lp group. The hostname from /etc/hosts is localhost.
Here is a copy of cupsd.conf in case it may be helpful:
/etc/cups/cupsd.conf
# "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $"
# Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a
# complete description of this file.
# Log general information in error_log - change "warn" to "debug"
# for troubleshooting...
LogLevel warn
# Administrator user group...
SystemGroup sys root
# Only listen for connections from the local machine.
Listen localhost:631
Listen /var/run/cups/cups.sock
# Show shared printers on the local network.
Browsing On
BrowseOrder allow,deny
BrowseAllow all
BrowseLocalProtocols CUPS dnssd
# Default authentication type, when authentication is required...
DefaultAuthType Basic
# Web interface setting...
WebInterface Yes
# Restrict access to the server...
<Location />
Order allow,deny
Allow localhost
Allow all
</Location>
# Restrict access to the admin pages...
<Location /admin>
Order allow,deny
Allow localhost
Allow all
</Location>
# Restrict access to configuration files...
<Location /admin/conf>
AuthType Default
Require user @SYSTEM
Order allow,deny
Allow localhost
</Location>
# Set the default printer/job policies...
<Policy default>
# Job/subscription privacy...
JobPrivateAccess default
JobPrivateValues default
SubscriptionPrivateAccess default
SubscriptionPrivateValues default
# Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI Validate-Job>
Order deny,allow
</Limit>
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
# All administration operations require an administrator to authenticate...
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
# All printer operations require a printer operator to authenticate...
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
# Only the owner or an administrator can cancel or authenticate a job...
<Limit Cancel-Job CUPS-Authenticate-Job>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
# Set the authenticated printer/job policies...
<Policy authenticated>
# Job/subscription privacy...
JobPrivateAccess default
JobPrivateValues default
SubscriptionPrivateAccess default
SubscriptionPrivateValues default
# Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI Validate-Job>
AuthType Default
Order deny,allow
</Limit>
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
# All administration operations require an administrator to authenticate...
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
# All printer operations require a printer operator to authenticate...
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
# Only the owner or an administrator can cancel or authenticate a job...
<Limit Cancel-Job CUPS-Authenticate-Job>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
# End of "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $".
The only change that I made to the file was *allowing* some things (trying to fix it), but nothing happened.
And here is the CUPS error log after trying to print many times:
localhost:631/admin/log/error_log
E [23/Feb/2012:00:58:33 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:00:58:41 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:00:58:51 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:11:45 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:13:17 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:17:32 -0200] Returning IPP client-error-not-authorized for Create-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:17:41 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:17:51 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:18:00 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:21:57 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:22:22 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:23:04 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:23:04 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:23:13 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:23:28 -0200] Returning IPP client-error-not-authorized for Create-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:23:31 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:28:14 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:33:44 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
If you need any more details please ask!
Any help would be very useful!
Thanks!

Hello,
some days ago I followed the wiki and installed a printer (HP Laserjet 1020) that uses the driver foo2zjs (from AUR). It didn't print anything in the beginning, but after blacklisting usblp module it printed a Test Page. Believing that everything was working fine, I unfortunately did not try to print any other document to check it.
Now, trying to print a document for the first time, the printer simply prints nothing, and the log file shows this error message: client-error-not-authorized.
There's no network here and the printer is connected directly to the computer. Both the regular and root users are included in the lp group. The hostname from /etc/hosts is localhost.
Here is a copy of cupsd.conf in case it may be helpful:
/etc/cups/cupsd.conf
# "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $"
# Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a
# complete description of this file.
# Log general information in error_log - change "warn" to "debug"
# for troubleshooting...
LogLevel warn
# Administrator user group...
SystemGroup sys root
# Only listen for connections from the local machine.
Listen localhost:631
Listen /var/run/cups/cups.sock
# Show shared printers on the local network.
Browsing On
BrowseOrder allow,deny
BrowseAllow all
BrowseLocalProtocols CUPS dnssd
# Default authentication type, when authentication is required...
DefaultAuthType Basic
# Web interface setting...
WebInterface Yes
# Restrict access to the server...
<Location />
Order allow,deny
Allow localhost
Allow all
</Location>
# Restrict access to the admin pages...
<Location /admin>
Order allow,deny
Allow localhost
Allow all
</Location>
# Restrict access to configuration files...
<Location /admin/conf>
AuthType Default
Require user @SYSTEM
Order allow,deny
Allow localhost
</Location>
# Set the default printer/job policies...
<Policy default>
# Job/subscription privacy...
JobPrivateAccess default
JobPrivateValues default
SubscriptionPrivateAccess default
SubscriptionPrivateValues default
# Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI Validate-Job>
Order deny,allow
</Limit>
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
# All administration operations require an administrator to authenticate...
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
# All printer operations require a printer operator to authenticate...
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
# Only the owner or an administrator can cancel or authenticate a job...
<Limit Cancel-Job CUPS-Authenticate-Job>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
# Set the authenticated printer/job policies...
<Policy authenticated>
# Job/subscription privacy...
JobPrivateAccess default
JobPrivateValues default
SubscriptionPrivateAccess default
SubscriptionPrivateValues default
# Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI Validate-Job>
AuthType Default
Order deny,allow
</Limit>
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
# All administration operations require an administrator to authenticate...
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
# All printer operations require a printer operator to authenticate...
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
# Only the owner or an administrator can cancel or authenticate a job...
<Limit Cancel-Job CUPS-Authenticate-Job>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
# End of "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $".
The only change that I made to the file was *allowing* some things (trying to fix it), but nothing happened.
And here is the CUPS error log after trying to print many times:
localhost:631/admin/log/error_log
E [23/Feb/2012:00:58:33 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:00:58:41 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:00:58:51 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:11:45 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:13:17 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:17:32 -0200] Returning IPP client-error-not-authorized for Create-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:17:41 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:17:51 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:18:00 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:21:57 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:22:22 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:23:04 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:23:04 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:23:13 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:23:28 -0200] Returning IPP client-error-not-authorized for Create-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:23:31 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:28:14 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
E [23/Feb/2012:01:33:44 -0200] Returning IPP client-error-not-authorized for Print-Job (ipp://localhost:631/printers/HP_LaserJet_1020) from localhost
If you need any more details please ask!
Any help would be very useful!
Thanks!

IFolder Client error: Not enough space on the iFolder server

iFolder client gets the following error:
iFolder synchronization cannot complete because you don't have enough space on the server.
Free space on the server = 464 MB (total space available 3000 MB)
Space needed to complete synchronization = 2536 MB.
Please free up space in your iolder and click OK.
Click Cancel to cancel to sync.
iFolder client log looks like this:
13.3.2011 23:40:46 Synchronizing with server...
13.3.2011 23:40:48 Synchronization failed
The volume size is 36 GB and it has free space 20% = 7 GB.
So there is enough space to the iFolder sync.
iFolder host is NetWare 6.5.8 server and iFolder version is 2.1.8
The same iFolder is synced from two (2) PC's, a desktop (XP SP3) and notebook (W7 SP1 32bit). Both have been working for long time.
The problems are seen on notebook using Windows 7. The Windows 7 (32-bit) OS has updated with SP1 on Saturday (May 12th.2011). After the update iFolder worked but on Sunday evening the errors started.
iFolder client (2.1.8) has removed and reinstalled. First the client seemed to work OK, but after the sync of last file, the error reoccured again.
iFolder sync partially works: files and folders created on desktop PC are synced to notebook.
But files created on notebook are not synced to desktop.
Any tips how to repair or troubleshoot?
Kind Regards, Harri

On 14/03/2011 06:36, hkarr wrote:
> iFolder client gets the following error:
>
> iFolder synchronization cannot complete because you don't have enough
> space on the server.
>
> Free space on the server = 464 MB (total space available 3000 MB)
> Space needed to complete synchronization = 2536 MB.
>
> Please free up space in your iolder and click OK.
464 MB is less than 2536 MB so error message is correct.
> Click Cancel to cancel to sync.
>
>
> iFolder client log looks like this:
> 13.3.2011 23:40:46 Synchronizing with server...
> 13.3.2011 23:40:48 Synchronization failed
>
>
> The volume size is 36 GB and it has free space 20% = 7 GB.
> So there is enough space to the iFolder sync.
Is there perhaps a volume or directory quota in place that would affect
the sync?
> iFolder host is NetWare 6.5.8 server and iFolder version is 2.1.8
>
> The same iFolder is synced from two (2) PC's, a desktop (XP SP3) and
> notebook (W7 SP1 32bit). Both have been working for long time.
>
> The problems are seen on notebook using Windows 7. The Windows 7
> (32-bit) OS has updated with SP1 on Saturday (May 12th.2011). After the
> update iFolder worked but on Sunday evening the errors started.
>
> iFolder client (2.1.8) has removed and reinstalled. First the client
> seemed to work OK, but after the sync of last file, the error reoccured
> again.
>
> iFolder sync partially works: files and folders created on desktop PC
> are synced to notebook.
> But files created on notebook are not synced to desktop.
>
> Any tips how to repair or troubleshoot?
Noting your follow-up reply re uninstall of Windows 7 SP1 I'll flag that
the iFolder 2.0 client is not supported on Windows 7 - it would have
been released before Windows 7 and certainly not updated for it (OES
Linux introduced iFolder 3).
HTH.
Simon
Novell Knowledge Partner (NKP)
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

Epson SX218 doesn't print (client-error-document-format-not-supported)

Hi there,
I'm currently trying to figure out how to get my Epson Stylus SX 218 to work. Unfortunately, cups (or the printer or whatever causes my problems...) obviously just doesn't want me to get this to work.
Here's what I've done so far:
I installed everything as described in the CUPS wiki article (so ghostscript and all the foomatic-stuff is installed, usblp is NOT blacklisted, see why below)
I installed epson-inkjet-printer-workforce-sx218 from AUR
I started cups...
Nothing worked (Printer not recognized, either with or without blacklisted usblp module...)
I searched the forums for a solution
I installed cups-usblp and reinstalled all the cups stuff
Printer got recognized! Yay!
So, now the printer is set up in cups using the avasys driver. But...
It doesn't print!
When I try to print a test page via the cups webinterface it keeps telling me
Unsupported format "application/vnd.cups-banner".
The following packages are installed now:
$ pacman -Qs cups
local/cups-usblp 1.5.0-1
local/libcups 1.5.0-1
$ pacman -Qs foomatic
local/foomatic-db 1:4.0.7_20110707-1
local/foomatic-db-engine 1:4.0.7_20110707-1
local/foomatic-db-nonfree 1:4.0.7_20110707-1
local/foomatic-filters 1:4.0.7_20110707-1
$ pacman -Qs epson
local/epson-inkjet-printer-workforce-320-sx218 1.0.0-6
$ pacman -Qs ghostscript
local/ghostscript 9.04-5
Here's my cups error log:
I [01/Jan/2012:18:59:01 +0100] Listening to [v1.::1]:631 (IPv6)
I [01/Jan/2012:18:59:01 +0100] Listening to 127.0.0.1:631 (IPv4)
I [01/Jan/2012:18:59:01 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [01/Jan/2012:18:59:01 +0100] Remote access is disabled.
D [01/Jan/2012:18:59:01 +0100] Added auto ServerAlias mamapc
I [01/Jan/2012:18:59:01 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
I [01/Jan/2012:18:59:01 +0100] Using default TempDir of /var/spool/cups/tmp...
I [01/Jan/2012:18:59:01 +0100] Configured for up to 100 clients.
I [01/Jan/2012:18:59:01 +0100] Allowing up to 100 client connections per host.
I [01/Jan/2012:18:59:01 +0100] Using policy "default" as the default.
D [01/Jan/2012:18:59:01 +0100] cupsdMarkDirty(---p--)
D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Not busy"
I [01/Jan/2012:18:59:01 +0100] Partial reload complete.
I [01/Jan/2012:18:59:01 +0100] Listening to [v1.::1]:631 on fd 6...
I [01/Jan/2012:18:59:01 +0100] Listening to 127.0.0.1:631 on fd 8...
I [01/Jan/2012:18:59:01 +0100] Listening to /var/run/cups/cups.sock:631 on fd 9...
I [01/Jan/2012:18:59:01 +0100] Resuming new connection processing...
D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:01 +0100] Discarding unused server-restarted event...
D [01/Jan/2012:18:59:01 +0100] cupsdAcceptClient: 13 from localhost:631 (IPv4)
D [01/Jan/2012:18:59:01 +0100] Report: clients=1
D [01/Jan/2012:18:59:01 +0100] Report: jobs=0
D [01/Jan/2012:18:59:01 +0100] Report: jobs-active=0
D [01/Jan/2012:18:59:01 +0100] Report: printers=0
D [01/Jan/2012:18:59:01 +0100] Report: printers-implicit=0
D [01/Jan/2012:18:59:01 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:18:59:01 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:18:59:01 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:18:59:01 +0100] PID 928 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [01/Jan/2012:18:59:01 +0100] cupsdReadClient: 13 GET /images/wait.gif HTTP/1.1
D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:01 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 13 GET /admin/?OP=redirect HTTP/1.1
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:06 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
D [01/Jan/2012:18:59:06 +0100] [CGI] argv[1] = "OP=redirect"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[13] = "USER=root"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[16] = "IPP_PORT=631"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[17] = "AUTH_TYPE=Basic"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[18] = "LANG=de_DE.UTF8"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[25] = "SCRIPT_NAME=/admin/"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin/"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[27] = "REMOTE_USER=root"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=960956618ce3e170434dd2afacd4fad3"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Opera/9.80 (X11; Linux i686; U; de) Presto/2.10.229 Version/11.60"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[33] = "QUERY_STRING=OP=redirect"
D [01/Jan/2012:18:59:06 +0100] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 929)
I [01/Jan/2012:18:59:06 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=929)
D [01/Jan/2012:18:59:06 +0100] cupsdSendCommand: 13 file=14
D [01/Jan/2012:18:59:06 +0100] [CGI] admin.cgi started...
D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 16 from localhost (Domain)
D [01/Jan/2012:18:59:06 +0100] [CGI] http=0xb9359360
D [01/Jan/2012:18:59:06 +0100] [CGI] org.cups.sid cookie is "960956618ce3e170434dd2afacd4fad3"
D [01/Jan/2012:18:59:06 +0100] [CGI] redirecting with prefix http://localhost:631!
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 16 WAITING Closing on EOF
D [01/Jan/2012:18:59:06 +0100] cupsdCloseClient: 16
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] Script header: Location: http://localhost:631/admin
D [01/Jan/2012:18:59:06 +0100] Script header:
D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 16 from localhost:631 (IPv4)
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 16 GET /admin HTTP/1.1
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:06 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[13] = "USER=root"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[16] = "IPP_PORT=631"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[17] = "AUTH_TYPE=Basic"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[18] = "LANG=de_DE.UTF8"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[25] = "SCRIPT_NAME=/admin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[27] = "REMOTE_USER=root"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=960956618ce3e170434dd2afacd4fad3"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Opera/9.80 (X11; Linux i686; U; de) Presto/2.10.229 Version/11.60"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[33] = "QUERY_STRING="
D [01/Jan/2012:18:59:06 +0100] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 930)
I [01/Jan/2012:18:59:06 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=930)
D [01/Jan/2012:18:59:06 +0100] cupsdSendCommand: 16 file=17
D [01/Jan/2012:18:59:06 +0100] PID 929 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] [CGI] admin.cgi started...
D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 14 from localhost (Domain)
D [01/Jan/2012:18:59:06 +0100] [CGI] http=0xb866c360
D [01/Jan/2012:18:59:06 +0100] [CGI] org.cups.sid cookie is "960956618ce3e170434dd2afacd4fad3"
D [01/Jan/2012:18:59:06 +0100] [CGI] No form data, showing main menu...
D [01/Jan/2012:18:59:06 +0100] [CGI] /usr/share/cups/drivers/pscript5.dll: Datei oder Verzeichnis nicht gefunden
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 POST / HTTP/1.1
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: No authentication data provided.
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 1.1 Get-Subscriptions 1
D [01/Jan/2012:18:59:06 +0100] Get-Subscriptions ipp://localhost/
D [01/Jan/2012:18:59:06 +0100] Get-Subscriptions client-error-not-found: No subscriptions found.
D [01/Jan/2012:18:59:06 +0100] Returning IPP client-error-not-found for Get-Subscriptions (ipp://localhost/) from localhost
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] Script header: Content-Type: text/html;charset=utf-8
D [01/Jan/2012:18:59:06 +0100] Script header:
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 WAITING Closing on EOF
D [01/Jan/2012:18:59:06 +0100] cupsdCloseClient: 14
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] PID 930 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:11 +0100] cupsdReadClient: 13 GET / HTTP/1.1
D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:11 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:11 +0100] cupsdReadClient: 13 WAITING Closing on EOF
D [01/Jan/2012:18:59:11 +0100] cupsdCloseClient: 13
D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:12 +0100] cupsdReadClient: 16 WAITING Closing on EOF
D [01/Jan/2012:18:59:12 +0100] cupsdCloseClient: 16
D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:12 +0100] cupsdAcceptClient: 13 from localhost:631 (IPv4)
D [01/Jan/2012:18:59:12 +0100] cupsdReadClient: 13 GET /admin/log/access_log? HTTP/1.1
D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:12 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [01/Jan/2012:18:59:32 +0100] Generating printcap /etc/printcap...
D [01/Jan/2012:18:59:32 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 14 from localhost (Domain)
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 POST / HTTP/1.1
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [01/Jan/2012:18:59:35 +0100] cupsdAuthorize: No authentication data provided.
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 1.1 CUPS-Get-Devices 1
D [01/Jan/2012:18:59:35 +0100] CUPS-Get-Devices
D [01/Jan/2012:18:59:35 +0100] cupsdIsAuthorized: username=""
D [01/Jan/2012:18:59:35 +0100] Returning HTTP Unauthorized for CUPS-Get-Devices (no URI) from localhost
D [01/Jan/2012:18:59:35 +0100] cupsdSendHeader: 14 WWW-Authenticate: Basic realm="CUPS", trc="y"
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 WAITING Closing on EOF
D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 14
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 14 from localhost (Domain)
D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 16 from localhost (Domain)
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 WAITING Closing on EOF
D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 14
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 POST / HTTP/1.1
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [01/Jan/2012:18:59:35 +0100] cupsdAuthorize: Authorized as root using PeerCred
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 1.1 CUPS-Get-Devices 1
D [01/Jan/2012:18:59:35 +0100] CUPS-Get-Devices
D [01/Jan/2012:18:59:35 +0100] cupsdIsAuthorized: username="root"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[1] = "1"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[2] = "0"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[3] = "2"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[4] = "2"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[5] = "requested-attributes=all exclude-schemes='beh','cups-pdf','bluetooth','dnssd','http','https','ipp','lpd','ncp','parallel','scsi','smb','snmp','socket'"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[13] = "USER=root"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[16] = "IPP_PORT=631"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[17] = "AUTH_TYPE=PeerCred"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[18] = "LANG=en_US.UTF8"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[23] = "REMOTE_ADDR="
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[25] = "SCRIPT_NAME=/"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[27] = "REMOTE_USER=root"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/1.5.0"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[30] = "REQUEST_METHOD=POST"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[31] = "CONTENT_LENGTH=244"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
D [01/Jan/2012:18:59:35 +0100] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 948)
I [01/Jan/2012:18:59:35 +0100] Started "/usr/lib/cups/daemon/cups-deviced" (pid=948)
D [01/Jan/2012:18:59:35 +0100] cupsdSendCommand: 16 file=14
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 949)
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 950)
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/ipps (PID 951)
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 952)
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 949 (mdns) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] [CGI] list_devices
D [01/Jan/2012:18:59:35 +0100] [CGI] usb_find_busses=2
D [01/Jan/2012:18:59:35 +0100] [CGI] usb_find_devices=7
D [01/Jan/2012:18:59:35 +0100] [CGI] libusb couldn't open USB device /dev/bus/usb/002/002: Permission denied.
D [01/Jan/2012:18:59:35 +0100] [CGI] libusb requires write access to USB device nodes.
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 950 (usb) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "ipps"...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 951 (ipps) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] Script header: Content-Type: application/ipp
D [01/Jan/2012:18:59:35 +0100] Script header:
D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "serial:/dev/ttyS0?baud=115200"...
D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "serial:/dev/ttyS1?baud=115200"...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 952 (serial) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] PID 948 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 WAITING Closing on EOF
D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 16
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:19:00:23 +0100] Report: clients=1
D [01/Jan/2012:19:00:23 +0100] Report: jobs=0
D [01/Jan/2012:19:00:23 +0100] Report: jobs-active=0
D [01/Jan/2012:19:00:23 +0100] Report: printers=0
D [01/Jan/2012:19:00:23 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:00:23 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:00:23 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:00:23 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:01:15 +0100] cupsdReadClient: 13 WAITING Closing on EOF
D [01/Jan/2012:19:01:15 +0100] cupsdCloseClient: 13
D [01/Jan/2012:19:01:15 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:19:19:03 +0100] Report: clients=0
D [01/Jan/2012:19:19:03 +0100] Report: jobs=0
D [01/Jan/2012:19:19:03 +0100] Report: jobs-active=0
D [01/Jan/2012:19:19:03 +0100] Report: printers=0
D [01/Jan/2012:19:19:03 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:19:03 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:19:03 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:19:03 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:22:10 +0100] Report: clients=0
D [01/Jan/2012:19:22:11 +0100] Report: jobs=0
D [01/Jan/2012:19:22:11 +0100] Report: jobs-active=0
D [01/Jan/2012:19:22:11 +0100] Report: printers=0
D [01/Jan/2012:19:22:11 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:22:11 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:22:11 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:22:11 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:24:21 +0100] Report: clients=0
D [01/Jan/2012:19:24:21 +0100] Report: jobs=0
D [01/Jan/2012:19:24:21 +0100] Report: jobs-active=0
D [01/Jan/2012:19:24:21 +0100] Report: printers=0
D [01/Jan/2012:19:24:21 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:24:21 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:24:21 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:24:21 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:27:26 +0100] Report: clients=0
D [01/Jan/2012:19:27:26 +0100] Report: jobs=0
D [01/Jan/2012:19:27:26 +0100] Report: jobs-active=0
D [01/Jan/2012:19:27:26 +0100] Report: printers=0
D [01/Jan/2012:19:27:26 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:27:26 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:27:26 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:27:26 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:37:11 +0100] Report: clients=0
D [01/Jan/2012:19:37:11 +0100] Report: jobs=0
D [01/Jan/2012:19:37:11 +0100] Report: jobs-active=0
D [01/Jan/2012:19:37:11 +0100] Report: printers=0
D [01/Jan/2012:19:37:11 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:37:11 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:37:11 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:37:11 +0100] Report: stringpool-total-bytes=5736
I [01/Jan/2012:19:37:41 +0100] Scheduler shutting down normally.
D [01/Jan/2012:19:37:41 +0100] Discarding unused server-stopped event...
I [01/Jan/2012:19:37:41 +0100] Saving job.cache...
I [01/Jan/2012:19:38:18 +0100] Listening to [v1.::1]:631 (IPv6)
I [01/Jan/2012:19:38:18 +0100] Listening to 127.0.0.1:631 (IPv4)
I [01/Jan/2012:19:38:18 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [01/Jan/2012:19:38:18 +0100] Remote access is disabled.
D [01/Jan/2012:19:38:18 +0100] Added auto ServerAlias mamapc
I [01/Jan/2012:19:38:18 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [01/Jan/2012:19:38:18 +0100] Creating missing directory "/var/run/cups"
D [01/Jan/2012:19:38:18 +0100] Repairing ownership of "/var/run/cups"
D [01/Jan/2012:19:38:18 +0100] Repairing access permissions of "/var/run/cups"
D [01/Jan/2012:19:38:18 +0100] Creating missing directory "/var/run/cups/certs"
D [01/Jan/2012:19:38:18 +0100] Repairing ownership of "/var/run/cups/certs"
D [01/Jan/2012:19:38:18 +0100] Repairing access permissions of "/var/run/cups/certs"
I [01/Jan/2012:19:38:18 +0100] Using default TempDir of /var/spool/cups/tmp...
I [01/Jan/2012:19:38:18 +0100] Configured for up to 100 clients.
I [01/Jan/2012:19:38:18 +0100] Allowing up to 100 client connections per host.
I [01/Jan/2012:19:38:18 +0100] Using policy "default" as the default.
I [01/Jan/2012:19:38:18 +0100] Full reload is required.
I [01/Jan/2012:19:38:19 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
I [01/Jan/2012:19:38:19 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [01/Jan/2012:19:38:19 +0100] Full reload complete.
D [01/Jan/2012:19:38:19 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [01/Jan/2012:19:38:19 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
D [01/Jan/2012:19:38:19 +0100] Removed "/var/spool/cups/tmp/0039f4f0366a5"...
D [01/Jan/2012:19:38:19 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [01/Jan/2012:19:38:19 +0100] Cleaning out old files in "/var/cache/cups"...
I [01/Jan/2012:19:38:19 +0100] Listening to [v1.::1]:631 on fd 8...
I [01/Jan/2012:19:38:19 +0100] Listening to 127.0.0.1:631 on fd 9...
I [01/Jan/2012:19:38:19 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
I [01/Jan/2012:19:38:19 +0100] Resuming new connection processing...
D [01/Jan/2012:19:38:19 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:19:38:19 +0100] Discarding unused server-started event...
D [01/Jan/2012:19:38:20 +0100] Report: clients=0
D [01/Jan/2012:19:38:20 +0100] Report: jobs=0
D [01/Jan/2012:19:38:20 +0100] Report: jobs-active=0
D [01/Jan/2012:19:38:20 +0100] Report: printers=0
D [01/Jan/2012:19:38:20 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:38:20 +0100] Report: stringpool-string-count=289
D [01/Jan/2012:19:38:20 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:38:20 +0100] Report: stringpool-total-bytes=4792
I [01/Jan/2012:20:53:48 +0100] Scheduler shutting down normally.
D [01/Jan/2012:20:53:48 +0100] Discarding unused server-stopped event...
I [01/Jan/2012:20:53:48 +0100] Saving job.cache...
I [01/Jan/2012:20:54:26 +0100] Listening to [v1.::1]:631 (IPv6)
I [01/Jan/2012:20:54:26 +0100] Listening to 127.0.0.1:631 (IPv4)
I [01/Jan/2012:20:54:26 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [01/Jan/2012:20:54:26 +0100] Remote access is disabled.
D [01/Jan/2012:20:54:26 +0100] Added auto ServerAlias mamapc
I [01/Jan/2012:20:54:26 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [01/Jan/2012:20:54:26 +0100] Creating missing directory "/var/run/cups"
D [01/Jan/2012:20:54:26 +0100] Repairing ownership of "/var/run/cups"
D [01/Jan/2012:20:54:26 +0100] Repairing access permissions of "/var/run/cups"
D [01/Jan/2012:20:54:26 +0100] Creating missing directory "/var/run/cups/certs"
D [01/Jan/2012:20:54:26 +0100] Repairing ownership of "/var/run/cups/certs"
D [01/Jan/2012:20:54:26 +0100] Repairing access permissions of "/var/run/cups/certs"
I [01/Jan/2012:20:54:26 +0100] Using default TempDir of /var/spool/cups/tmp...
I [01/Jan/2012:20:54:26 +0100] Configured for up to 100 clients.
I [01/Jan/2012:20:54:26 +0100] Allowing up to 100 client connections per host.
I [01/Jan/2012:20:54:26 +0100] Using policy "default" as the default.
I [01/Jan/2012:20:54:26 +0100] Full reload is required.
I [01/Jan/2012:20:54:27 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
I [01/Jan/2012:20:54:27 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [01/Jan/2012:20:54:27 +0100] Full reload complete.
D [01/Jan/2012:20:54:27 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [01/Jan/2012:20:54:27 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
D [01/Jan/2012:20:54:27 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [01/Jan/2012:20:54:27 +0100] Cleaning out old files in "/var/cache/cups"...
I [01/Jan/2012:20:54:27 +0100] Listening to [v1.::1]:631 on fd 8...
I [01/Jan/2012:20:54:27 +0100] Listening to 127.0.0.1:631 on fd 9...
I [01/Jan/2012:20:54:27 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
I [01/Jan/2012:20:54:27 +0100] Resuming new connection processing...
D [01/Jan/2012:20:54:27 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:20:54:27 +0100] Discarding unused server-started event...
D [01/Jan/2012:20:54:28 +0100] Report: clients=0
D [01/Jan/2012:20:54:28 +0100] Report: jobs=0
D [01/Jan/2012:20:54:28 +0100] Report: jobs-active=0
D [01/Jan/2012:20:54:28 +0100] Report: printers=0
D [01/Jan/2012:20:54:28 +0100] Report: printers-implicit=0
D [01/Jan/2012:20:54:28 +0100] Report: stringpool-string-count=289
D [01/Jan/2012:20:54:28 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:20:54:28 +0100] Report: stringpool-total-bytes=4792
I [02/Jan/2012:05:34:23 +0100] Scheduler shutting down normally.
D [02/Jan/2012:05:34:24 +0100] Discarding unused server-stopped event...
I [02/Jan/2012:05:34:24 +0100] Saving job.cache...
I [02/Jan/2012:05:35:05 +0100] Listening to [v1.::1]:631 (IPv6)
I [02/Jan/2012:05:35:05 +0100] Listening to 127.0.0.1:631 (IPv4)
I [02/Jan/2012:05:35:05 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [02/Jan/2012:05:35:05 +0100] Remote access is disabled.
D [02/Jan/2012:05:35:05 +0100] Added auto ServerAlias mamapc
I [02/Jan/2012:05:35:05 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [02/Jan/2012:05:35:05 +0100] Creating missing directory "/var/run/cups"
D [02/Jan/2012:05:35:05 +0100] Repairing ownership of "/var/run/cups"
D [02/Jan/2012:05:35:05 +0100] Repairing access permissions of "/var/run/cups"
D [02/Jan/2012:05:35:05 +0100] Creating missing directory "/var/run/cups/certs"
D [02/Jan/2012:05:35:05 +0100] Repairing ownership of "/var/run/cups/certs"
D [02/Jan/2012:05:35:05 +0100] Repairing access permissions of "/var/run/cups/certs"
I [02/Jan/2012:05:35:05 +0100] Using default TempDir of /var/spool/cups/tmp...
I [02/Jan/2012:05:35:05 +0100] Configured for up to 100 clients.
I [02/Jan/2012:05:35:05 +0100] Allowing up to 100 client connections per host.
I [02/Jan/2012:05:35:05 +0100] Using policy "default" as the default.
I [02/Jan/2012:05:35:05 +0100] Full reload is required.
I [02/Jan/2012:05:35:06 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
I [02/Jan/2012:05:35:06 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [02/Jan/2012:05:35:06 +0100] Full reload complete.
D [02/Jan/2012:05:35:06 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [02/Jan/2012:05:35:06 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
D [02/Jan/2012:05:35:06 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [02/Jan/2012:05:35:06 +0100] Cleaning out old files in "/var/cache/cups"...
I [02/Jan/2012:05:35:06 +0100] Listening to [v1.::1]:631 on fd 8...
I [02/Jan/2012:05:35:06 +0100] Listening to 127.0.0.1:631 on fd 9...
I [02/Jan/2012:05:35:06 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
I [02/Jan/2012:05:35:06 +0100] Resuming new connection processing...
D [02/Jan/2012:05:35:06 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [02/Jan/2012:05:35:06 +0100] Discarding unused server-started event...
D [02/Jan/2012:05:35:07 +0100] Report: clients=0
D [02/Jan/2012:05:35:07 +0100] Report: jobs=0
D [02/Jan/2012:05:35:07 +0100] Report: jobs-active=0
D [02/Jan/2012:05:35:07 +0100] Report: printers=0
D [02/Jan/2012:05:35:07 +0100] Report: printers-implicit=0
D [02/Jan/2012:05:35:07 +0100] Report: stringpool-string-count=289
D [02/Jan/2012:05:35:07 +0100] Report: stringpool-alloc-bytes=4648
D [02/Jan/2012:05:35:07 +0100] Report: stringpool-total-bytes=4792
I [02/Jan/2012:05:56:24 +0100] Scheduler shutting down normally.
D [02/Jan/2012:05:56:24 +0100] Discarding unused server-stopped event...
I [02/Jan/2012:05:56:24 +0100] Saving job.cache...
I [02/Jan/2012:17:22:51 +0100] Listening to [v1.::1]:631 (IPv6)
I [02/Jan/2012:17:22:51 +0100] Listening to 127.0.0.1:631 (IPv4)
I [02/Jan/2012:17:22:51 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [02/Jan/2012:17:22:51 +0100] Remote access is disabled.
D [02/Jan/2012:17:22:51 +0100] Added auto ServerAlias mamapc
I [02/Jan/2012:17:22:51 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [02/Jan/2012:17:22:51 +0100] Creating missing directory "/var/run/cups"
D [02/Jan/2012:17:22:51 +0100] Repairing ownership of "/var/run/cups"
D [02/Jan/2012:17:22:51 +0100] Repairing access permissions of "/var/run/cups"
D [02/Jan/2012:17:22:51 +0100] Creating missing directory "/var/run/cups/certs"
D [02/Jan/2012:17:22:51 +0100] Repairing ownership of "/var/run/cups/certs"
D [02/Jan/2012:17:22:51 +0100] Repairing access permissions of "/var/run/cups/certs"
I [02/Jan/2012:17:22:51 +0100] Using default TempDir of /var/spool/cups/tmp...
I [02/Jan/2012:17:22:51 +0100] Configured for up to 100 clients.
I [02/Jan/2012:17:22:51 +0100] Allowing up to 100 client connections per host.
I [02/Jan/2012:17:22:51 +0100] Using policy "default" as the default.
I [02/Jan/2012:17:22:51 +0100] Full reload is required.
I [02/Jan/2012:17:22:52 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
I [02/Jan/2012:17:22:52 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [02/Jan/2012:17:22:52 +0100] Full reload complete.
D [02/Jan/2012:17:22:52 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [02/Jan/2012:17:22:52 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
D [02/Jan/2012:17:22:52 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [02/Jan/2012:17:22:52 +0100] Cleaning out old files in "/var/cache/cups"...
I [02/Jan/2012:17:22:52 +0100] Listening to [v1.::1]:631 on fd 8...
I [02/Jan/2012:17:22:52 +0100] Listening to 127.0.0.1:631 on fd 9...
I [02/Jan/2012:17:22:52 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
I [02/Jan/2012:17:22:52 +0100] Resuming new connection processing...
D [02/Jan/2012:17:22:52 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [02/Jan/2012:17:22:52 +0100] Discarding unused server-started event...
D [02/Jan/2012:17:22:53 +0100] Report: clients=0
D [02/Jan/2012:17:22:53 +0100] Report: jobs=0
D [02/Jan/2012:17:22:53 +0100] Report: jobs-active=0
D [02/Jan/2012:17:22:53 +0100] Report: printers=0
D [02/Jan/2012:17:22:53 +0100] Report: printers-implicit=0
D [02/Jan/2012:17:22:53 +0100] Report: stringpool-string-count=289
D [02/Jan/2012:17:22:53 +0100] Report: stringpool-alloc-bytes=4648
D [02/Jan/2012:17:22:53 +0100] Report: stringpool-total-bytes=4792
I [02/Jan/2012:18:15:27 +0100] Scheduler shutting down normally.
D [02/Jan/2012:18:15:27 +0100] Discarding unused server-stopped event...
I [02/Jan/2012:18:15:27 +0100] Saving job.cache...
E [02/Jan/2012:18:40:40 +0100] cupsdAuthorize: pam_authenticate() returned 7 (Authentication failure)!
E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:41:04 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:44:36 +0100] Returning HTTP Forbidden for CUPS-Delete-Printer (ipp://localhost/printers/Epson-Stylus-SX218) from localhost
E [02/Jan/2012:18:46:25 +0100] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:54:26 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:56:58 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:58:04 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:58:04 +0100] Bad request line "%16%03%01" from localhost!
W [02/Jan/2012:19:01:48 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:01:49 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:01:53 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:01:53 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
E [02/Jan/2012:19:02:06 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:02:57 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
W [02/Jan/2012:19:03:42 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:03:42 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:03:42 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:04:46 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
E [02/Jan/2012:19:05:17 +0100] Bad request line "%16%03%01" from localhost!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:06:12 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
E [02/Jan/2012:19:06:57 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:06:58 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:15:57 +0100] Avahi client failed, closing client to allow a clean restart
W [02/Jan/2012:19:18:48 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:18:48 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:19:55 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
E [02/Jan/2012:19:20:30 +0100] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
E [02/Jan/2012:19:24:03 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
Please let me know if you should need other outputs, logfiles, etc. I appreciate any idea that could help me to get this damn thing to finally print something.
Thank you very much!

Hi Radhakrishnan,
ORARRP doesn't actually do any printing itself. Via COM/Active-X, it calls the appropriate program that corresponds to the type of output, and then this program does the actual printing. For PDF, it calls Acrobat Reader to print the document. Acrobat Reader displays the printer dialog to let you choose which printer to use, and then when you click OK, Acrobat Reader prints the document and sends it to the printer.
I expect that you'll find that when you use Acrobat Reader yourself on this machine it has exactly the same problems with this particular printer configuration. If so, you'll need to contact Adobe for further assistance.
regards,
Stewart

I cannot detect my wireless hp desk jet 3520 printer, I cannot detect my wireless hp desk jet 3520 printer

I cannot detect my wireless HP desk jet 3520 printer from my iPad?

I can't find an Arris router with that model number, are you sure it is not a TG862?
Regardless, Arris routers are known to either be incompatible with Bonjour or have problems with Bonjour packets hence Airprint will not work. Check with Arris' website and see if there is a firmware update availble for your router for Bonjour/Airprint compatibility and install it or switch out your router.

Help with HP desk jet F4435 on MacBookPro

I tried installing my HP desk jet F4435 with the disc that came with the printer. I received a "successful" message. It wouldn't print. Then I uninstalled the printer and tried just plugging in the USB to connect it. Tried printing and receieved yet another error message.
HELP!

Some hp driver software for your printer here:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=&sw_l ang=&product=304431#N207
If needed, gutenprint 5.2.9 can be obtained here:
http://gimp-print.sourceforge.net/MacOSX.php
Many network printers do not require an explicit driver, or can use "Generic". They accept standard protocols and can be printed to directly. If the printer can be discovered automatically and appears in the list of available printers, it should determine what driver is needed and go fetch any needed driver for you.

Can not open pdf after saving scan from desk jet 3050

I can open pdf file sent to me but I can not open scanned pdf files I scanned with my desk jet 3050 J610

Hi Marymae07,
Welcome to the HP Support Forums! I see you are not able to open up a saved pdf file once you save the scan with your HP Deskjet 3050. To better assist you, can you please leave me with the following information:
1. What is your current Operating system, Windows or Mac and which version?
2. What program are you using to scan, are you using the HP software or another program?
3. Do you get any error messages when you attempt to save as pdf file?
4. Are you able to save the scan in another format like jpeg?
I will watch for your reply, so we can begin troubleshooting.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Help with printing photos on photo print paper with Desk-jet 3050A

Hello I am in need of some advise regarding my desk-jet 3050A printer, the problem is that I cant seem to print pictures on to my glossy photo print paper; I can print pictures onto standard A4 plain paper but the pixels have blurred slightly.
I cant seem to find any accurate advise regarding which photo printer paper is compatible with my printer and how to actually print a picture onto both plain paper/photo paper at a good quality, any help would be appreciated, let me know if you need anymore information. Thanks
Chris
OS: Windows 7 Home Premium 64-bit
Make: HP Desk-jet e-All-in-one Printer
Model: J611a series 3050A
Product serial No: {Removed for privacy}
FPU No: CR231-64001

Hi,
What exactly is going wrong? and with the link below you can find the specs of the printer. Under paper handling the sizes and paper weight that are supported are listed.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02105426&tmp_task=prodinfoCategory&cc=us&dlc=en...
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Newly Installed HP desk jet 2510 all in one printer will not print web pages

Hello;
I have just now installed my new 2510 desk jet printer and installed all software.
It prints saved docs fins, but when I try and print web docs from the "print view " screen, it does not print. I have tried this a few times now.
Any suggestions?
Bill L

Hello landsabil ,
Please check if the printer HP deskjet 2510 is selected when you click on FILE > Print on a webpage .
If it does not work, then try to print using a different Browser.
Regards,
Jabzi
Help the community by marking this post .
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!
I work for HP
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Desk jet DJ4515 setup via mobile

I have purchased a desk jet dj4515 and wanted to know if I can install and set the printer up using a mobile phone as I do not have a laptop or computer.

Dear Lewington,
Here you have some documents where explains how to print from a mobile:
http://support.hp.com/in-en/product/HP-Deskjet-Ink-Advantage-4510-e-All-in-One-Printer-series/528599...
http://support.hp.com/in-en/product/HP-Deskjet-Ink-Advantage-4510-e-All-in-One-Printer-series/528599...
http://support.hp.com/in-en/product/HP-Deskjet-Ink-Advantage-4510-e-All-in-One-Printer-series/528599...
I hope you find it helpful.
Greetings.
* I am not an employee of HP, my work is voluntary.
If this answer was helpful and clarify or resolve your problem, please mark the issue as resolved and click my star next to give a kudo as thanks.
I am not an employee of HP, my work is voluntary. If this answer has been helpful and clarifies or solves your problem, please click the button
and click on the icon if you want acknowledge the assistance.

DESK JET 6940

i have a desk jet 6940 that will not comunicate with my desk top computer.I have a DELL with
windows professional. Its hooked up to a router.

Hello jghiggs, welcome back to the forums
I read your post about how your Deskjet 6940 is not communicating with your Windows PC, that is connected to a router.
I will gladly do my best to help you however, I will need some more information from you to clarify the problem.
Please let me know the answers to the following questions and if you have not yet tried the steps, please give them a shot and let me know the results!
Can you print a test page from the printer itself (without using the PC)?
Do this by pressing the cancel button (X) on the printer until the test pages starts printing, and then release the button.
Run the HP Print and Scan Doctor which may correct the printing issue, if not it will alert you to where the issue is, let me know the detailed results.
Have you tried printing from different programs?
Which version of Windows are you running? (XP, 7, 8, 8.1)
How is the printer connected to the computer? (Wireless/Ethernet/USB)?
Have you tried an alternate connection?
What Firewalls and Anti-virus software are installed? Have you tried disabling or uninstalling them?
Please let me know the above information and results and we will proceed from there!
Thank you and enjoy your Wednesday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP 5650 Desk jet + OS 10.5: "Client-Error-Not-Possible"

Similar Messages

Maybe you are looking for