Hp 6005 pro with Windows 8

We are running Windows 8 64bit on HP 6005 pro. The computers hang when waking up from sleep. This happens on all HP 6005 pro, every time regardless of BIOS firmware version. We no longer allow the HP 6005 pro to go to sleep. Has anyone else seen this?

I am having the same issue. installed Windows 8.1 with all of the updated drivers from hp. when resuming from sleep, it will appear to work for about a minute but will lock up.

Similar Messages

  • Autodesk Revit on Yoga 3 Pro with Windows 8.1 not working

    I have just started working with my new Yoga 3 PRO with Windows 8.1, and have found that it has compatibility problems with Autodesk Revit (2014 & 2015).  This is perhaps a graphic driver issue.
    Does anyone know of any solutions/updates that will resolve this? Or a way to communcate this back to Lenovo?
    Solved!
    Go to Solution.

    I have been running Revit 2014 very successfully for months now - There is
    probably a limit to the size of projects that will run efficiently on 8GB
    of RAM, but most small/medium size project will be fine.
    I love it!

  • I have a mac book pro with Windows for Mac, I have really been struggling to figure out a keyboard shortcut to switch between 2 excel files can someone suggest a solution please ?

    I have a mac book pro with Windows for Mac, I have really been struggling to figure out a keyboard shortcut to switch between 2 excel files can someone suggest a solution please ?

    someonehelpmaddy wrote:
    My Mac knows that it is connected to the montior...
    Open your Displays system preferences.  Is there an Arrangement tab and does it show two screens?  If no Arrangement tab then your mac does not know it has two screens.  Maybe smc and pram reset will shake it free and maybe not.  Maybe there's something wrong with the connection.  Thunderbolt plugs are similar to mini-displayport plugs so make sure the plug is pushed firmly in so that essentially all the metal part disappears inside the socket.  The plugs can be a little tricky in that you need to make sure the plug is fully seated in their socket.
    If you do see two screens in the Arrangement tab then click Detect Displays and Gather Windows to get the Displays preferences of the other monitor on to your main monitor.  Check the resolution and if there is a refresh rate check that as well.

  • HT3986 i formated my macbook pro with windows 7 and i lost all the drivers, does anyone know how to recover the drivers?

    i formated my macbook pro with windows 7 and i lost all the drivers, does anyone know how to recover the drivers?

    How did you get them to install the first time and where did you get them?
    Read the Installation Guide, Boot Camp 4.0 FAQ and the Windows 7 FAQ.
    Here's the Boot Camp Manual.

  • Purchased MacBook Pro with windows which will not open b/c no license

    Purchased MacBook Pro with windows which will not now open b/c no license number.
    CD package has license number stripped from Apple. How do I get the license number
    for the software I purchased for Windows XT?

    This is not a Mac/Apple issue.  You need to contact the seller and ask where the Windows XP product key is.

  • HT4407 Macbook pro with windows 7

    I have a macbook pro with windows 7 and im trying to disable trackpad while mouse is connected, Is this possible?

    yes i have done this but i dont know if its violate the rules of this community

  • Adobe PDF Printer not working as print driver; 9.5.5 (pro) with Windows 7, 64 bit

    I have installed, repaired, uninstalled and re-installed Acrobat Pro 9.5.5 on a newly formatted SSD with Windows 7, 64 bit on my desktop machine. The program was installed from Acrobat Pro 9.0.0 and updated within the program. I have the program also installed on my laptop, and the Adobe PDF Printer driver is working properly on my laptop.
    On my desktop with the newly formatted SSD, the Adobe PDF printer driver is not working. Note that I am using the printer driver, and not any pdf creation techniques within MS Office or other programs.
    When I go to the Adobe PDF printing preferences on my desktop, I only get a generic, two tab window open. When I print a file to this printer on my desktop machine, I do not get a window opening that asks where to create the pdf or what to name it, and I never see any files created. In MS Word, the Create PDF option under the Acrobat tab works and opens a dialog to ask the name and location to save, and then opens a PDF Maker progress window and properly creates the file. I can also save a file as an .eps or .ps file and use Distiller to create the pdf. However I cannot get the Adobe PDF printer driver in my Devices and Printers to work properly, although it works just fine on my laptop with the same program (Pro 9.5.5) and same Windows version (7, 64 bit).
    Repairing, uninstalling and re-installing does not solve the problem. Acrotray.exe *32 process is running. Any ideas on why this won't run properly on my desktop, but will run on a similarly configured laptop?
    On my laptop, I get a full, (7) tabl menu with all the normal options:

    I found this answer from Deepak Chauhan on another forum, and it solved this problem!
    Try this to add Adobe PDF printer manually on Windows 7, and Windows Vista.
    If windows 7 is Enterprise or better edition: (Admin rights required)
    Start>search for printmanagement.msc and open the print management module
    Expand the print server and expand the computer name to see availbale printers, drivers and printer ports.
    - from printers ensure there's no Adobe PDF printer, if there is delete it
    - go to ports and delete the PDF ports (the ones ending in *.pdf)
    - go to drivers and delete the PDF converter.
    Take note if any errors occur, but continue with the following steps regardless.
    If on windows 7 home edition, just goto start>Devices and Printers and ensure PDF pritner is not listed.
    Then open the registry (if any erors deleting these keys happen, see below)
    1: go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Printers
    delete any adobe PDF printer subkey present
    2: go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors
    delee the PDF port monitor if present
    3: go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers
    again delete and pdf printer subkey
    If any erros occur, you need to set the owner of the key to the currently logged in admin user, then ensure that user has full control.
    Do this by right-click the key and selecting permissions, clicking on advanced, then the owner tab.
    Once you've all that has been done, open a command line as administrator.
    Copy and pate the following commands in order
    1: net stop spooler
    2: rundll32.exe setupapi.dll,InstallHinfSection AdobePDFPortMonitor 128 C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Xtras\AdobePDF\AdobePDF.inf
    3: net start spooler
    4:rundll32.exe printui.dll,PrintUIEntry /if /b "Adobe PDF" /f "C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Xtras\AdobePDF\AdobePDF.inf" /r "Documents\*.pdf" /m "Adobe PDF Converter"
    That should set back the pdf printer.
    This seemed to provide the link that provided the Adobe PDF Settings tab to the Adobe PDF Printing Preferences that was missing!

  • Poor graphics performance on Macbook Pro with windows 7 bootcamp

    I have a 13" Non-Retina Machbook Pro with Intel HD 4000 Graphics, purchased around 2 years ago. I installed Bootcamp for certain assignments for school, running Windows 7, and started playing videogames on it. I played Dark Souls and Chivalry, mainly, and both ran reliably at a pretty mediocre framerate but with decent graphics settings. I picked up Dark Souls 2 in the summer, and was able to run it and medium-high graphics with decent framerate. several months later, after not having played on Windows for a while, I came back to Dark Souls 2, but found that the game would run with this strange, pulse-y lag, like everything would animate quickly for a moment before pausing and continue again. the framerate itself was normal, it would just stutter constantly. (about one pause per second) and it wasn't a complete freeze, either. The game would move very slowly for a moment instead of freezing.
    Anyway I was surprised and decided to test it with Chivalry. Same Problem. Kingdoms of Amalur, same problem. All of these were windows only so I decided to compare something that could run on both platforms. I tested it with league of legends - Mac side: Medium-high graphics with 60 fps. Windows side: Low graphics with pulsing lag and 30fps.
    I read through some articles and found something about SMC reset. Tried that. No effect.
    Then I updated my drivers. No effect.
    Any idea what's wrong with my windows-side graphics?

    I have Windows 7 Pro Boot Camped on my Mac Mini (late 2012) HD 4000 as well. Nvidia driver. On a graphics intense game of mine I have learned to just get by. Unfortunately using Nvidia or other graphics driver updates through Windows Update is the best you can do. I would not attempt or recommend a newer graphics driver from the manufacture website. You may end up rendering your Windows unusable. Windows 7 has great benefits on a Mac, but, limited user options. One of my graphics intense programs had to be found and purchased from the App Store. Windows version just would not run correctly. If you are stuck with the RAM that came with your MBP, you may want to upgrade to 8 or the full 16 GB of RAM which may help. Otherwise I find Windows to run quite well. I use it for DVD playback and Media Center which runs great. I have 4 GB of RAM. Cheers!

  • Some problems on my macbook pro with windows 7.

    I just installed win 7 on my macbook pro with retina. I used win7 several times, but now, when I enter in win7 side, there is always black screen on my computer. However, I can enter in safe mode. What can I do about this? PLZZZZZ　ＨＥＬＰＰＰ　ＭＥＥＥ！！！

    When you say black screen are you referring to the black screen that says "This is not a genuie copy of Windows" ? Or specifically when do you get the black screen/ are there any errors?

  • Appcrash with multitrack sessions in Audition CS6 on a MacBook Pro with Windows 7

    This is an issue with multitrack sessions different from 44100 Hz in Audition CS6 (as part of a Premium Suite CS6). While multitrack sessions with  a sampling rate of  44100 Hz works normally (as long as I use clips with 44100 Hz) any other sampling rate causes  an APPCRASH (s. below). Also with the insertion ( in a 44100 Hz multitrack session, of course) of any clip with a sampling rate different from 44100 Hz, the programme crashes in the moment it's going to generate a adapted copy for the multitrack timeline.
    Audition is installed on a MacBook Pro Retina 15" ,Mid 2014, Model 11,3, Intel Core i7 4870HQ 2,5 GHz, 16GB RAM  with  Windows 7 SP1.
    I tried all advices of the Adobe troubleshooting site and some of the community.
    Especially:
    - the simplified mode with user-defined system start
    - deactivated user account control
    - new user account
    - deactivated data execution prevention (DEP)
    Also the use of different audio interfaces affords no effect:
    - build in Cirrus Logic CS4208 with MME drivers
    - Motu UltraLight mk3 hybrid via USB with Asio drivers.
    In spite of an extensive search I can't find any similar case in the net.
    So, please, can you help me?
    Sorry, it's a german version of windows 7:
    Problem signature
    Problemereignisname:    APPCRASH
      Anwendungsname:   Adobe Audition CS6.exe
      Anwendungsversion:    5.0.2.7
      Anwendungszeitstempel:           505806ee
      Fehlermodulname:    StackHash_0a9e
      Fehlermodulversion: 0.0.0.0
      Fehlermodulzeitstempel:           00000000
      Ausnahmecode:        c0000005
      Ausnahmeoffset:       45ef2b00
      Betriebsystemversion:  6.1.7601.2.1.0.256.48
      Gebietsschema-ID:   1031
      Zusatzinformation 1:    0a9e
      Zusatzinformation 2:    0a9e372d3b4ad19135b953a78882e789
      Zusatzinformation 3:    0a9e
      Zusatzinformation 4:    0a9e372d3b4ad19135b953a78882e789

    I'm afraid you are right. At the worst I'm more than 50% of the audition users on a mac with windows.To solve the problem within a passable time I would like to change to the mac version of audition. But unfortunately it's impossible to use the mac version with a windows licence. And CS6 licences (mac audition) are not longer available (only at a moon rate). 
    Because of the weekend we can pass the time with the latest news of my trouble-shooting.
    The crash is not only within the multitrack session but also within the waveform view: when I try to change the sampling rate (Edit -> Convert Sample Type) the programme crashes with the same problem signature. And here it crashes with all sampling rates , including 44.1k audio files. On the other hand I can play all sampling rates within the waveform view. 
    I compared the logfile from the predecessor of the MacBook , a LG Notebook with windows vista and a working Au CS6 with the current logfile of the Mac: They are identical at the beginning and at the end (termination sequence). But after " Initializing AuScripting"  there is a "DLMS 6.0x39 FileServer startup code: 0" and the listing of a couple of codecs in the Notebook logfile - but not so in the Mac logfile.
    Also the logfile of my workstation with a working Au CS6 shows this "DLMS 6.0x39 FileServer startup code" - line. Because of the two working and one crashing computer this part of the logfile seems to be important ??
    Logfile audition predecessor (Notebook) - detail
    A blank line is only to arrange the logfile more clearly - it doesn't stand for missing lines.
    Ticks = 60014      <4068> <AuLog.DisplaySurface> <5>     Initialize PRM
    Ticks = 60014      <4068> <AuLog.DisplaySurface> <5>     Initialize DS
    Ticks = 60076      <4068> <AuLog.DisplaySurface> <5>     DS Initialize succeeded
    Ticks = 60076      <4068> <AuLog.DisplaySurface> <5> Video Panel is using the Display Surface
    Ticks = 64304      <4068> <AuLog.Startup> <5> Initializing AuScripting
    Ticks = 86191      <3796> <AuLog.Plug-in> <5> DLMS 6.0x39 FileServer startup code: 0
    Ticks = 86191      <3796> <AuLog.Plug-in> <5>     AVI Movie (*.avi)
    Ticks = 86191      <3796> <AuLog.Plug-in> <5>         *.AVI
    Ticks = 86191      <3796> <AuLog.Plug-in> <5>     FLV (*.flv)
    Ticks = 86191      <3796> <AuLog.Plug-in> <5>         *.FLV
    Logfile MacBook Pro - detail
    Ticks = 3510      <3976> <AuLog.Startup> <5> AuUI initialization sequence complete.
    Ticks = 3869      <3976> <AuLog.DisplaySurface> <5>     Initialize PRM
    Ticks = 3869      <3976> <AuLog.DisplaySurface> <5>     Initialize DS
    Ticks = 3900      <3976> <AuLog.DisplaySurface> <5>     DS Initialize succeeded
    Ticks = 3915      <3976> <AuLog.DisplaySurface> <5> Video Panel is using the Display Surface
    Ticks = 4493      <3976> <AuLog.Startup> <5> Initializing AuScripting
    Ticks = 22948      <3976> <AuLog.Plug-in> <5> Loading AMIO plug-in: AmioWav
    Ticks = 22948      <3976> <AuLog.Plug-in> <5> Audition Wave Amio-Plug-In. ID: 60df8553-00c8-4fd7-8a07-6f25e30ab79c
    Ticks = 45958      <3976> <AuLog.Shutdown> <5> AuUI termination sequence started...

  • Currently running adobe acrobat 9 pro with windows 7 - can I update to Acrobat XI with windows 7

    Need to update adobe acrobat from 9 pro to acrobat XI pro.. can I do this with windows 7 ?

    Acrobat XI Pro system requirements
    Windows
    1.3GHz  or faster processor
    Microsoft Windows XP with Service Pack 3 for 32 bit or Service Pack 2 for 64 bit; Windows Server 2003 R2 (32 bit and 64 bit); Windows Server 2008 or 2008 R2 (32 bit and 64 bit); Windows 7 (32 bit and 64 bit); or Windows 8 (32 bit and 64 bit)
    512MB of RAM (1GB recommended)
    1.85GB of available hard-disk space
    1024x768 screen resolution
    DVD-ROM drive
    Internet Explorer 7, 8, 9, or 10; Firefox Extended Support Release; or Chrome
    Video hardware acceleration (optional)

  • Updated MacBook Pro with Windows 7, doing nothing on Apple

    I have a MacBook Pro with Leopard 10.5.1, and I was running Windows XP Pro Service Pack 3 on the Windows side.
    I updated to Windows 7 , but did not do anything on the Apple side. Big mistake,
    Windows 7 works fine BUT!!! I have no Mac OS.
    In order to get the Mac working again, what do I need to do? Will I have to restart my Windows 7 upgrade, and use Bootcamp with the Leopard. Can I reload Leopard and BootCamp and then have both Leopard and Windows 7 working as properly.
    If you could provide or direct me to someone who could, step by step instruction on this please do so.
    My windows Data is still on Carbonite and I have no issues with having to lose my Apple side memory.
    I have a external drive if needed I also have 37.3Gig free space
    A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools.

    I am not sure what the selections were. Maybe this will help. I ran the Windows 7 upgrade without any thought to BootCamp or the Leopard OS. Now Windows 7 is on the same partition that XP had been on.
    I have no reason to thank that my Leopard OS is not fine but is now isolated from the Windows 7 or anywhere that I could find.
    Maybe If I downloaded BootCamp it would make that connection again.
    Thanks for your help, am I the only one to make this mistake??

  • MacBook Pro with Windows Mobile

    i Have Mac Book Pro with Leopard... And i have a windows mobile 6 device that i want to sync. What program is there that lets me transfer music to my pda with usb wire...I know that i can just bluetooth it but it just takes to long..
    Thanks

    You can use SyncMate. I've downloaded it but have yet to try it as my phone should be here tomorrow. Seems like a nice little program. You can get it here... http://www.eltima.com/download/syncmate/
    Hope it helps, even though its been a month since you've posted this...
    JF

  • Installing QT Pro with Windows Vista

    Recently purchased new computer with Windows Vista Home Premium OS. Downloaded QT version7. Tried to use QT Pro license key that worked for QT7 on my previous computer but it won't work. Any reason it shouldn't? Any suggestions?
    HP d4790y   Other OS   Windows Vista Home Premium

    Make sure you're entering in both the user name and key code exactly as in the email Apple sent you. Any error in either, including leaving off a salutation (for instance, if the email says "Mr. John Smith") will cause the registration to error.
    Also, make sure that your key is for QuickTime 7 for Windows. A key for an earlier version of QuickTime, or a key for the Mac version of QuickTime, will not work.

  • Keyboard hangs on MacBook Pro with Windows 7

    I have a 2008 MacBook Pro and Windows 7 RC installed with Boot Camp drivers.
    More and more, the keyboard hangs. Sometimes it does not register a keystroke (for about 1 second), and shortly thereafter it hangs on 1 keystroke (pressing a random key once results in about 30 of that characters on screen).
    I know Windows 7 is still not officialy released, but I do hope this gets fixed in the near future. I have had many Windows 7 installs, including previous versions. They all had the same issue.
    The problem seems to be the Keyboard manager. Windows 7 also reported that this service was using more than usual resources, causing it to be bad for battery life.

    Same problem here. I already installed Windows 7 and then Windows XP to see if this was a Win7 issue but on both OS the issue is occurring.
    Delay with the Keyboard when press a key. Sometimes it writes 30 or more of the same character.
    I can't do the double fingers/right click most of the times since the drives seems to hang and multitouch trackpad stops to recognize the two fingers right click. It eventually come back working OK from time to time and then stops working again.
    Bootcamp 3.0 did not resolve the issue for me under Win XP and Win 7

Maybe you are looking for