HP 6210 printer problems with upgrade to Snow Leopard

I have recently bought a new Macbook Pro with Snow Leapard and my HP printer 6210 gets errors when I try to print. (It worked fine with the old 10.5.x. OSX) I have uninstalled the old HP software, then installed the most current from the HP website and then done an Apple Software update. The error messages are:
E [20/Sep/2011:16:54:45 -0400] Unable to execute /Library/Printers/hp/cups/filters/commandtohp.filter/Contents/MacOS/commandtohp : no execute permissions (0100664)
E [20/Sep/2011:16:54:45 -0400] [Job 96] Unable to start filter "/Library/Printers/hp/cups/filters/commandtohp.filter/Contents/MacOS/commandtoh p" - Operation not permitted.
E [20/Sep/2011:16:54:45 -0400] [Job 96] Stopping job because the scheduler could not execute a filter.
E [20/Sep/2011:16:54:49 -0400] Unable to execute /Library/Printers/hp/cups/Inkjet6.driver/Contents/MacOS/Inkjet6: no execute permissions (0100664)
E [20/Sep/2011:16:54:49 -0400] [Job 97] Unable to start filter "/Library/Printers/hp/cups/Inkjet6.driver/Contents/MacOS/Inkjet6" - Operation not permitted.
E [20/Sep/2011:16:54:49 -0400] [Job 97] Stopping job because the scheduler could not execute a filter.
E [20/Sep/2011:16:59:50 -0400] [Job 97] Stopping unresponsive job!
If anyone can help me get this running, I would greatly appreciate it!
PS: The scanner works fine and I can print "test" pages and use the printer utilities.
Thanks!
Bradley

Thanks to a posting from a similar problem about an HP Photosmart 2610, I was able get my problem solved:
I deleted the folder
/Library/Printers/hp
then restarted in "Safe Boot" mode to empty the trash, then I rebooted in normal mode.
Then I reinstalled the HP software and rebooted.
Then I did Software Update and rebooted.
Now everything works fine!

Similar Messages

Printer problem after upgrade to Snow Leopard

My trusty HP Deskjet 1200C printer keeps giving an error now I have upgraded to Snow Leopard (on the way to Lion for iCloud). I checked for an upgraded driver on the HP site but there doesn't seem to be one after OS 10.6
I am getting this error - PrintJobMgr failed
Any suggestions welcome and advice for what will and won't work with Lion.
Thanks

Try to restart, see if problem still happens.
If it does.. remove printer (and other periferals) from the computer and do an SMC reset. Also unplug your printer's power as well to rest it too.
Also, do a PRAM reset.
Let us know how it goes.
Reset your computer's PRAM
http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26871.html
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964

Problem with upgrade to snow leopard

I upgraded to snow leopard from 10.4, and now my Imac will not let me login. "Your home folder, which is protected by FileVault, didn't open. It needs to be repaired." I've tried to restart with command + s or simply holding c with the boot disk and nothing happens it keeps taking me to the login screen. Somebody please help me this is very frustrating...

Have you tried this ? http://www.tuaw.com/2011/12/12/prevent-certain-accounts-from-unlocking-filevault -2/
Terminal is accessible from the install disk, in Tools, I believe. You can also try this to unlock your password:
Boot in Single User (Command-S), then at the prompt, type the following commands, hitting Enter after each one:
mount -uw /
rm /var/db/.AppleSetupDone
shutdown -h now
This should unlock your login screen. Additionally, you can downgrade to Tiger again (clean install required, so better partition your drive, then install on the free space), back up your personal data to an external drive, then wipe out your entire drive and reinstall from scratch.

Printing problems after "upgrading" to Snow Leopard

Under Leopard my two printers (HP Deskjet 970 Cxi and Epson Stylus Photo 2100) worked just fine.
With Snow Leopard the quality of the prints with the two printers is simply bad. The print-driver is: gutenprint v5.2.3 even an upgrade to gutenprint v5.2.4 did not make any difference.
When printing a test page with the Epson Stylus Photo 2100 the printer simply pauses during the print somewhere along the test page. When the printer is started again (green button in the printer window) it starts printing from the beginning again and pauses again. Useless!

Eric,
For the Deskjet, I'd suggest using the Leopard drivers (off of the Leopard DVD). They will give you much better quality printing, although you'll have to deal with lack of features printing from 64-bit apps. The easiest way to work around them is to print through Preview an force Preview to run in 32-bit mode.
The other option would be to install the [HPIJS|http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macos x/hpijs] drivers.
Just trying to help.
Andrew

Problems with FCP after Snow Leopard Installation

I'm editing canon 5d footage in FCP. I use MPEG Streamclip to properly convert the footage before importing to fcp. Everything was working absolutely fine until I installed snow leopard. Now, all of the clips in the timeline have those weird lines as if I imported the footage without converting it. I have a deadline and if I have to re-edit this entire project it's not going to be pretty. I have installed all of the updates for FCP and Snow Leopard. I tried a test by creating a new batch in MPEG streamclip and the footage is fine. It appears that I might have to re-edit everything.   Can someone PLEASE offer some assistance? I can't afford to re-edit this project.
Thank you

Yes... I am aware of the canon plug in for converting 5d/7d footage. I either use that plug in or MPEG stream clip and they both have been working fine.   "Properly" meaning... FCP does not recognize H.264 (5d and 7d) therefor we need to convert the video using either MPEG stream clip or the free canon plug in. The best codec to edit this footage is ProRes 422LT ProRes422 - I only use the 5d and or 7d cameras for my projects and have been editing this way for some time without any problems what so ever. The problems immediately arose after upgrading to Snow Leopard. The problem lies in my EXISTING FCP projects that are already in the works. I am still able to convert footage for new projects without a problem. I am using the latest updated versions of SL and FCP. I did the following to trouble shoot:
1. Did a clean reinstall of FCP - STILL HAPPENING
2. On an existing project I deleted a few of the problem clips. Took the original and converted it again using MPEG Stream clip. Renamed it and from the FCP project, I located the new clip. SAME PROBLEM
3. On an existing project, I deleted a few of the clips completely. Converted the original again using MPEG SC. Imported the entire new clip in FCP, re-edited it and dragged it into the time line. NO PROBLEM WORKS FINE
4. Opened a new project in FCP.   Took some of the original problematic clips. Converted them using MPEG SC. Dragged into the timeline. NO PROBLEM, WORKS FINE
5. Played both the original clips (before conversion) and the converted clips in Quick Time - NO PROBLEM WORKS FINE
6. Exported part of a problematic project to Quick Time - NO PROBLEM WORKS FINE
7. Opened up one of the same projects from the same hard drive on my other mac (Mac Book Pro) and there are NO PROBLEMS. THEY WORK FINE
Based on everything I've listed above, the problem seems to be happening in the Viewer and Canvas on my I-Mac which I just upgraded to Snow Leopard. The exported projects are fine. Am I to assume that I should continue working with these existing projects and everything will be fine? I've spoke to 5 or 6 friends that are experienced and no one can come up with an answer.

X11 problem after upgrade to Snow Leopard - keyboard unresponsive

I have just upgraded to Snow Leopard from Tiger.
I use Sun's Secure Global Desktop native client which runs using X11. It worked fine under Tiger, but since the upgrade it isn't working - the native client starts up (and starts the X server), it responds to the trackpad and I can focus on the login box, but when I type nothing shows up, so I can't log in!
I installed X11 with Snow Leopard and as far as I can tell it is running OK - Gimp seems to work. The SGD native client log says this:
Smart card library loaded: /System/Library/Frameworks/PCSC.framework/PCSC
Smart card support failed to initialize (0x8010001d)
Server version 4 3 0 915
Client version 4 2 0 983
Info: local X server available
Any assistance would be very gratefully received.

If other X11 apps are working except this one, then perhaps it's incompatible with Snow. To see if this is the case I would suggest installing Snow on a freshly erased drive (could be an external or other internal) and see if the problem is fixed. Could be the result of upgrading. You did upgrade Leopard, not Tiger, right? Can't do the latter without first upgrading to Leopard.

X11 problem after upgrade to Snow Leopard

I have just upgraded to Snow Leopard from Tiger.
I use Sun's Secure Global Desktop native client which runs using X11. It worked fine under Tiger, but since the upgrade it isn't working - the native client starts up, I can access its menus (for preferences, etc) and I can focus on the login box, but when I type nothing shows up, so I can't log in!
I installed X11 with Snow Leopard and as far as I can tell it is running OK - The native client log says "local X server available" and Gimp seems to be working fine.
Any assistance would be very gratefully received.

If other X11 apps are working except this one, then perhaps it's incompatible with Snow. To see if this is the case I would suggest installing Snow on a freshly erased drive (could be an external or other internal) and see if the problem is fixed. Could be the result of upgrading. You did upgrade Leopard, not Tiger, right? Can't do the latter without first upgrading to Leopard.

Problems after upgrading to Snow Leopard

Apple Store just upgraded Leopard to Snow Leopard on my Macbook Pro. Now my printer wont work, The message "inkjet8 quit unexpectedly" pops up.
What can I do???

First of all, your profile says 10.6.3. If that is accurate you need to update it further ... Once you have upgraded to Snow Leopard, if your upgrade took you to 10.6.3 you will need to apply the Combo updater Mac OS X 10.6.8 Update Combo v1.1 and follow with a software update to pick up the most recent security updates.
Then, if it still doesn't work go to the manufacturer's website where you may pick up an update for your printer.
But if the Combo update has not been done you should do it any way.

Font Problem after Upgrade to Snow Leopard?

Has anyone else noticed this? I open a Keynote I had just done before upgrading to Snow Leopard, and the Bullets and font are all jumbled together, and don't play when I try to play the slideshow?

I noticed the same jumbled text problem.
When I went to look at Font Book, I see that those fonts are no longer installed. It must've happened when I loaded Snow Leopard last weekend.
Anyway, I went to reinstall fonts, and I see I've got a bunch that got uninstalled. But when I try to reinstall them, like Calisto and Caligula to name the first couple I tried, Font Book reports that there were serious errors when trying to load them.
Does anyone have insights into the vague message: "System Validation" as the serious problem? I don't see a way to get more details about the problem than that.

Problems with time machine snow leopard to mountain lion

I have recently upgraded from Snow Leopard to Mountain Lion now when I enter Time Machine the 'ladder side bar' will only display item from the date I went onto Mountain Lion even though the external HD has information datuing back 3 years, anyone had the same problem?

Hi,
http://pondini.org/OSX/Setup.html
http://pondini.org/TM/B6.html

Problem with airport after snow leopard upgrade.

I know there are several threads about this already but none of the "answers" to those threads fix my problem. I just upgraded snow leopard and installed the new update. Since then I can connect to my wifi, but nothing will load. My airport says that I am connected and that I have a full signal, but whenever I open my internet browser (firefox, safari), nothing will load, it just stays on the screen that says "loading" at the top. I've tried deleting the "Automatic" airport option and creating my own but that has not worked. Any suggestions as to how to fix this?? Right now the only way i can access the internet is be plugging directly into the router.

Hi swftrules,
It's probably worth trying just to ensure that the issue is (or isn't) location specific. Preferably to go somewhere that you've never connected before and has free WiFi without crazy encryption. An Apple Store is a great location to try.
If it does work at the new location, I'd be inclined to reset the router and set it back up (open network) and see if that works and then add encryption from there.
If it doesn't work at the new location, then I'd consider reloading the OS if you've already tried the new network location.

Problem with tiger to snow leopard upgrade

Hi,
I wanted to upgrade from Tiger to Snow Leopard and bought a retail 10.6 Snow Leopard install disc MC223Z/A. on the box. 2Z691-6428-A on the disc.
It would not let me install it unless I erased and partitioned the destination disc thus losing my settings and preferences like the old Archive and Install as it suggested in the article mentioned below..
I tried this after reading this article
http://www.computerworld.com/s/article/9137147/Upgrading_to_Apple_s_Snow_Leopard _OS_What_you_need_to_know.
I presume now that the article was written for upgrading from Leopard and not Tiger.
Perhaps I missed something when I tried.
Any ideas from the experts.
Regards from UK,
Alan

Hmmm,
10.4.10
# Disk 1: 2Z691-6089-A
# Disc 2: 2Z691-6113-A
Compatibility
17" iMac (Late 2006 CD) Intel Core 2 Duo 1.83GHz, Mac Pro Intel Xeon 5100 Series Dual Processor 2.0GHz, 2.66GHz, 3.0GHz, Mac Pro 8-Core Intel Xeon 5300 Series Quad 3.0GHz, 13" MacBook (Late2006) Intel Core 2 Duo 1.83GHz, 2.0GHz, 13" MacBook (Mid 2007) Intel Core 2 Duo 2.0GHz, 2.16GHz, Mac Mini (Mid 2007) Intel Core 2 Duo 1.83GHz, 2.0GHz
Machine ID: iMac5,2, MacPro1,1, MacPro2,1, MacBook2,1, Macmini2,1
http://www.welovemacs.com/2z6916089a.html
Could you have installed some Server update in the past?

HP deskjet F735 scanning problem after upgrading to Snow Leopard

I just upgraded my mac to snow leopard and after which my hP all in one doesn't work as it use to be. I don't have problems regarding printing and photocopying. It's the scanning that I had a problem. The photosmart doesn't work anymore and if I use preview, print& fax from system preferences and image capture still it does not scan and even i select the scanner. A message will just popped up that there is no device selected or unknown error occured. pls. help. and thank you

vive,
If you can't get Scanning running with the In-OS solution, a full Snow Leopard compatible solution is available [here|http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al- 75095-1&lc=en&dlc=en&cc=us&product=3457028&os=219&lang=en].
Let me know if that doesn't solve your problem.
Just trying to help.
Andrew
Message was edited by: HP Mac Architect

SMB Slow connection with upgrade to SnoW Leopard and Windows Clients.

<pre>
Dear,
I have now upgraded my MAC OS X LEOPARD 10,5,8 to new SNOW LEOPARD 10,6,2 and if some problems disappear I have a newer big one !
Now every time a Windows CLient try to connect to a SMB Share of SL server that take a long time about 10-15 seconds to open after that depending on client OS that could be nice for a moment (windows 7 and XP) or browsing stay very slow like for 2003 server connecting to Share on S.Leopard.
Could you please help me.
My SL are the main SMB share computer with all data it is connect like other clients to AD (SBS2003).
I have a SBS2003 server that are Master of Domain
and a Server 2008 acting like Terminal Server also member server of domain.
Here are kind of log I receive from SMBD.LOG: I suppose the Credentials problem when connecting are my explanation but how to avoid that !
2009/11/14 13:37:06, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/smbd/reply.c:reply_special(332)
netbios connect: name1=MACSRV name2=NOMAD
2009/11/14 13:37:06, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/smbd/reply.c:reply_special(339)
netbios connect: local=macsrv remote=nomad, name type = 0
2009/11/14 13:37:08, 2, pid=64794 /SourceCache/samba/samba-235/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/auth/odsam.dylib' loaded
2009/11/14 13:37:10, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/smbd/sesssetup.c:setupnew_vcsession(1273)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
2009/11/14 13:37:10, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/auth/odsam.dylib' loaded
2009/11/14 13:37:18, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/smbd/sesssetup.c:setupnew_vcsession(1273)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
2009/11/14 13:37:28, 0, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/opendirectory.c:getopendirectoryauthenticator(247)
failed to read DomainAdmin credentials, err=67 fd=15 errno=2
2009/11/14 13:37:28, 0, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/opendirectory.c:opendirectoryuser_auth_and_sessionkey(580)
dsDoDirNodeAuthOnRecordType gave -14091 eDSAuthMethodNotSupported
2009/11/14 13:37:28, 0, pid=64803 /SourceCache/samba/samba-235/samba/source/auth/authodsam.c:opendirectory_smb_pwd_checkntlmv1(387)
opendirectoryuser_auth_and_sessionkey gave -14091 eDSAuthMethodNotSupported
2009/11/14 13:37:28, 0, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/opendirectory.c:getopendirectoryauthenticator(247)
failed to read DomainAdmin credentials, err=67 fd=28 errno=2
2009/11/14 13:37:28, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/auth/auth.c:checkntlmpassword(309)
checkntlmpassword: authentication for user fabrice -> fabrice -> fabrice succeeded
2009/11/14 13:37:28, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/vfs/darwin_streams.dylib' loaded
2009/11/14 13:37:28, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/vfs/darwinacl.dylib' loaded
2009/11/14 13:37:28, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/vfs/notify_kqueue.dylib' loaded
2009/11/14 13:37:28, 1, pid=64803 /SourceCache/samba/samba-235/samba/source/smbd/service.c:makeconnectionsnum(1092)
nomad (192.168.2.20) connect to service NetDown initially as user fabrice (uid=501, gid=20) (pid 64803)
I also have some kind of following message:
2009/11/14 13:35:18, 0, pid=64579 /SourceCache/samba/samba-235/samba/source/lib/utilsock.c:readdata(534)
read_data: read failure for 4 bytes to client 192.168.2.20. Error = Connection reset by peer
NOte that initialy I don't have problem with MAC OS Client but to be sure they use SMB I have desactived AFP server on SNOW LEOPARD SERVER and now they can't browse the share in finder but when connection via COMMAND+K and SMB://server/share that give now the same error but a little bit faster than windows clients.
Could you help me to troubleshout that problem ?
Thanks for your help.
Felee
</pre>

Dear CarlosGBA,
So when you put 2 computers of your network in WORKGROUP in place of DOMAIN the 38 others works fine ? Strange ?
I have about 15 computers, some are already in workgroup other are linux smb other MAC, the data server are MAC OS X SL, the problem appear for all windows machines, I have try to dissable NTLMV2 and Kerberos since it is probably the faulty element with opendirectory,but always without success !
I don't know what I can do to trouble shout, I hope next release 10.6.3 come soon and correct about all SMB problem ! Probably a dream only ! Since I ask my self if Apple want to correct something andwhy is this problem let without solutionso long ! For a company it is a big problem.I suppose that Apple never read this forum and never answer our problem ! May be I should contact the support phone to be helped !
Thanks for you help.

Problem after upgrading to Snow Leopard from Tiger

Hello all!
I have an old macbook pro 15" purchased on 2007. It's model is macbookpro3,1 and it runs Mac OS X Tiger 10.4.11. Recently I upgrade the system to Snow Leopard. Everything seems to be fine except the laptop runs much hotter.
At first I don't know why but then I found out that on the Energy Saver menu, there is no options to select between the intel onboard graphics card and nVidia 8600M GT. And it seems the system selects the 8600M GT as the default card, therefore my GPU temperature is always about 60 Celsius degree.
Another problem is the Airport card is also hot, it's always about 60C degree (according to iStat Pro)
So anybody has same problem with me? It'd be great if you could help me figuring out these issues.
Thanks a lot!!!

TonyHeli wrote:
At first I don't know why but then I found out that on the Energy Saver menu, there is no options to select between the intel onboard graphics card and nVidia 8600M GT.
Are you sure there is an Intel onboard graphics processor in your MacBook Pro? AFAIK, Mac laptops do not have multiple graphics processors -- MBP's have a single fairly powerful one with dedicated video memory & regular MacBooks have only a somewhat less powerful one that use shared system memory.
For example, the MacBook Pro (Mid 2007, 2.4/2.2GHz) Technical Specifications make no mention of an Intel GPU.

HP 6210 printer problems with upgrade to Snow Leopard

Similar Messages

Maybe you are looking for