HP 6280t Desktop. Can I install a 2nd IDE hard drive??

I have a HP p 6280t desktop. I have some old spare hard drives from prior PC's...all of these drives are IDE. The current hard drive in my 6280 is a SATA. The motherboard is HP part 492774 001.
I do not see how I can connect the IDE drive....Please help. Be descriptive in your explanation.
This question was solved.
View Solution.

Now that you have given a reason (just wiping a drive, then donate), I would offer this adapter.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Similar Messages

Can I install onto an external hard drive + run off it?

Can I install onto an external hard drive + run off it?
If possible, will the system run at the *same* speed as the built in hard drive?
ALSO: Am I correct in saying that if I replace my current hard drive with an SSD one?
If so: that *****
Thanks
Omar

OS X doesn't matter what disk you boot from, as long as it can be formatted properly in Disk Utility. You can boot from a USB stick drive if it's big enough.
Thunderbolt would be the fastest, the drive would be the limiting factor there. You can find Thunderbolt drives like these at stores like macsales.com. But USB 3 might also feel fast enough.
If you have boot systems installed on many drives connected to your Mac, the way you tell the Mac which one to use is to hold down the Option key at startup. This will present icons of all the connected drives you can boot from, then you just pick one and go.

How can I install after replacing my hard drive?

My hard drive on my pc is failing, and I want to replace it without interruption in creative cloud functionality. How can I install on the new hard drive?

Cloud Getting Started https://helpx.adobe.com/creative-cloud/topics/getting-started.html
OR
http://forums.adobe.com/community/download_install_setup
or
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
Do remove from the old drive first so you don't use up one of your activations
Remove license on a computer http://forums.adobe.com/thread/1442423?tstart=0
-http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

Can't install Mavericks to my hard drive: what should I do?

I am using a mid-2010 Macbook with Snow Leopard. I have been trying to install OS X Mavericks, with no real success. When I downloaded and ran the installer, it would not let me select my internal hard drive as start-up disk. I used a flash drive, assuming that, for whatever reason, I would be expected to install in onto my hard drive from the stick; what actually happened (sensibly enough, I suppose) was that, if I left the stick in the USB port when I started up the laptop, I got Mavericks running rather slowly; whereas if I started up without the stick, I got Snow Leopard running normally - and in no instance did I see a way to get Mavericks from the stick to the hard drive. I have found no mention anywhere else of those who install Mavericks having to run it from an external hard drive. What is going on? How do I get Mavericks on my computer? Do I really need, or even want, to?

Hello 123catsank,
It sounds like you are unable to install Mavericks due to this error message that you cannot use the disk to start the computer but it is the only partition you have on the hard drive. I recommend the troubleshooting from the following article. While the title of it mentions Mac OS X Lion, the steps are relevant for Mac OS X Mavericks as well:
OS X Lion: Installer reports "This disk cannot be used to start up your computer"
http://support.apple.com/kb/ts3926
Thank you for using Apple Support Communities.
Cheers,
Sterling

Imac g5- can't install os on new hard drive

Hello,
I have an iMac G5 that I haven't used in a while. When trying to turn it on today, I got the "question mark" folder. I tried to do some troubleshooting- tried to reinstall os x, but the hard drive didn't show up in the os x installer OR in disk utility. I went to my local Apple store and I was told that I needed a new hd. So, I bought a new hd and installed it. I still have problems, though! When I try to install os x, it says, "This software cannot be installed on this computer". I am using the install disc that originally came with the computer. The hd doesn't show up in the os x installer, but it does show up in disc utility. I have no idea what to do at this point. Please help!
Also, the new hd I bought is a Maxtor SATA II/300.

I am using the os x 10.4.2 install disk. The computer originally came with 10.4.0 install disks, but I misplaced them. The 10.4.2 install disk says it's for an iMac, though, so it should be working.. right?
Maybe, maybe not, Chuck. THis is almost certainly the cause of your problem, in fact.
If yours came with 10.4.0 originally it would have been a "Rev A" model (which probably had a version of Panther on it subsequently upgraded to Tiger) . 10.4.2 first arrived with the slightly different ALS model, though.
If you have access to the computer that came the with the 10.4.2 discs, you may be able to workaround the issue by connecting the one you are trying to instal on to the later one with a firewire cable, booting the one you want to install on in "Target Disk" mode (so it appears on the later computer's desktop), and then installing , using the DVD drive on the later computer.
This won't work in all circumstances (because of variations in the machine specific OS discs) , but in your case I think it would probably work. Note, though, that I am assuming you really do have a Tiger disc for the older iMac, as legally it is the one that provides you with a licence to install Tiger.
The best solution would be to find the original discs. If you can't then you should try to obtain a replacement set from Apple.
Rod

Can't install OSX on a hard drive

I connected a small HD (10GB) in a Firewire external case. Wanted to install Jaguar onto this small HD. Initialized the HD. A message read, "You can not install Mac OSX on this disk. You cannot start up your computer using this disk."
Didn't notice the jumpers, might this be the reason I am given the message above, perhaps it does not have the correct jumper settings?
At first, when I put the 10GB HD into the Mac, it did not show up in X, then I put the jumpers in the Master position, all was well until I used 9.2.2 and this HD doesn't show up on the desktop.
Many appreciations for reading this post.
Patt

Mac OS X has common drivers built in, but OS 9 requires a driver be installed before it can mount a Hard drive.
If you are running OS 9 you can use Drive Setup to "Update Driver" if permitted. Otherwise, you will have to initialize the drive, which partitions, installs a driver, and creates a directory. Use HFS+ Extended mode.
If you are using Mac OS X, use Disk Utility, HFS+Extended mode, and be sure that the box for "Install Mac OS 9 Drivers is checked. They don't take up much space and you cannot do it later.
If the drive is used, I recommend selecting "Write Zeroes" or "Zero all Data" This process takes several hours, but forces the drive to write a known pattern into every block and verify that it can be read back without resorting to error-correction Hardware. If error correction is required, the block is declared bad and a spare block is substituted at the Drive Hardware level.

Can I install os on a hard drive conected through usb

Can I install a OS on a hard drive conected through usb On my macbook pro?
Thanks:)

Will not work.
Mac is not capable of running older version then it shipped with originally.
Allan

Can't install Panther on new hard drive

After my old hard drive failed on my IMac DV400, I bought a new 40GB hard drive. I put it in and when I put in Disc 1 of OS X 10.3, it gets to the destination drive and the pic has the drive with a ! mark in red and it says it can't load it as it is not in the first 8MB of the drive and will not let me go any farther. I erased the drive using the disc utility and now what do I need to do? I know on an IBM compatable, I have to format the drive but the disc utility doesn't have that option. What next? Bob

Bob:
Your iMac must be one referenced in this article.
As Niel indicated, you need to format your HDD so that the first partition is less than 8 GB.
Formatting, Partitioning Erasing a Hard Disk Drive
Boot from the install CD holding down the "C" key.
Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create tqo partitions.)
• Click on Options button
• Select number of partitions in pull-down menu above Volume diagram. You are creating two partitions.
• Either adjust the size of the volume in the diagram or type in the size field 7.9 GB
• Type in name in Name field (usually Macintosh HD) for Partition 1 and something like Data for Partition 2
• Select Volume Format as Mac OS Extended (Journaled)
Optional: Check box to Install OS 9 Drivers
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
Please do post back with further questions or comments.
Cheers
cornelius

Can't Install OS on new Hard Drive

I just got a brand new iMac G5 with a bad Hard Drive. Apple sent a new hard drive but after I installed it I can't install the OS 10.4. I ran Disk First Aid and it says Invalid extent entry, Volume check failed, ERROR: The underlying task reported failure on exit, 1 HFS volume checked, 1 volume could not be repaired because of an error. I also can not run the Apple Care disc because I have a wireless mouse. I have installed no hardware upgrades.

Like Mike said, erase fixes that type of error a lot of times. I have also had a lot of success using a program called DiskWarrior. It rebuilds the directory files and usually fixes errors like that without data loss.

Can't install(format?) new hard drive

I recently purchased a Wetern Digital Scorpio 250GB PATA HD for my Toshiba M35X-S114. This was the drive recommened on the Toshiba Laptop Accessories page. I physically instaled the new drive but can't figure out how to get it started. I used the System Recovery DVD for my computer thinking I could install the original software on the new hard drive. The guy on the tech support phoneline said I could. When I tried to use the recovery disc I got all the wall to the message where it prompts me to "press C for continue or A to abort". When I press C, the cursor moves right below the prompt and just blinks. The tech support line said the process may take several hours but I let it do this for for 3.5 hours and the cursor was still just blinking below the continue/abort message. Is this normal? Do I just need to be patient? When I used the recovery disk on the old, original hard drive my computer was completely recovered in 45 minutes. Oh, BIOS reads "none" next to hard disk. I hope this helps.

I emailed Hitachi support and got this response.
It works. Just a pain!!
Hard drives of SATA type interface does not have jumpers to configure. You
can still use a SATA 3.0Gb/s drive (set to 3.0Gb/s) in your system, but it
will only work at 1.5Gb/s.
If your have a PC system, you can temporarily install the drive internally
and use our utility called Feature Tool that'll allow you to change various
ATA settings. This utility has the diskette and CD version. If you do not
have a floppy drive and are unable to create a Feature Tool diskette, you
can select the Feature Tool CD image. The fourth download link is for the
image file. This file will allow you to create a bootable CD version of
Feature Tool when a floppy diskette drive is unavailable. For instructions
on how to properly use this file, please refer to the documentation
included with your CD burning software.
If you have any questions regarding the usage of Feature Tool, please refer
to the User's Guide (see page 17 on how to change the drive capacity). The
Feature Tool and User's Guide can be downloaded from the following URL:
http://www.hitachigst.com/hdd/support/download.htm#FeatureTool
Before running Feature Tool, ensure that your system boot sequence (in your
system BIOS) is set to boot to your CD ROM drive as the first device.
Insert the bootable Feature Tool diskette or CD that you created and let
the system boot to this CD.

Can I install a 1 terabite hard drive and update it with time machine?

What would I need to do? I have a 250 gig hard drive now, I would like to install a 1 terabite. Would I need to install the os then update it with the time machine backup to have everything that I have now? I have a MacBook Pro 13 inch with OSX Snow leapord. I had gotten this notebook mid summer of 2010. Any comment would be appreicated.

Right now, I have a 320 gig hhd that I use for my time machine backup, I recently backed up my notebook, if I decide to upgrade the hhd to a 1 tera, I will get another 1 terahhd for time machine backup. I just wanted to know if I could change the hhd, install the os and instead of installing all the drivers, music, movies that I purchased, if time machine backup would do that for me. Thank you for your comment OGELTHORPE!

Can I install windows on another hard drive?

So, I just purchased a 1TB hard drive and was wondering if I could install windows on to the new hard drive and leave my mac hard drive (128GB) just OS X. Is there any way to do this through Boot Camp?

Installing Windows on an external drive is not supported.
Neither of MacBook Air (13-inch, Mid 2013) - Technical Specifications or MacBook Air (11-inch, Mid 2013) - Technical Specifications have a built-in Optical drive, so you will need to use a USB2 disk, Bootcamp Assistant and a Windows ISO to create a USB installer and install it on the internal disk.
Please start at How to install Windows using Boot Camp - Apple Support.

Can I install my old internal hard drive into my new G5?

Hello All,
I've just purchased a new computer:
Apple Mac Pro CTO
2GB (4 x 512MB) Two 3GHz Dual-Core Intel Xeon
500GB 7200-rpm Serial ATA 3Gb/s
NVIDIA GeForce 7300 GT 256MB (single e-link DVI/dual-link DVI)
My old computer is a PMG4, Dual 1Ghz, 1GBRam, 80G HD. I installed a secondary internal drive; a Maxtor 250G 7L250RO, 16MB ATA (MXT-6B250RO)
I've filled up about 100G on the Maxtor and was wondering if I can install this HD into one of the empty bays of my new computer? Space is not necessarily the issue, rather I would love to be able to put all I need on the Maxtor from the old computer and just pop it into my new Mac.
Can this internal be installed into my new Mac?
Any help would be greatly appreciated.
Thanks in advance.

He means buy a FireWire 400/800 drive enclosure that will take your drive and let you use it. It is almost impossible (for me) to fit a PATA drive in the 2nd optical drive bay of the Mac Pro.
I would invest in some more drive(s) for the Mac Pro though. I firmly believe in having two backup sets minimum. And to have a backup of the system as well as a "safe" emergency boot drive as well.
In order to boot from a drive on Mac Pro, it must be formatted or reformatted with GUID partition scheme (Disk Utility: Partition and at the bottom, click on "Options" to make the selection. So you may want to boot from backup/clone at some point to repair your main drive.
You can begin to find FW cases at OWC (www.macsales.com) and other places like Amazon, FWDepot etc.

Have a old macbook 2006 with newer 500 GB seagate Momentus hard drive. I took mac to apple store and they said logic board is bad. Can I purcase another used macbook and install my old seagate hard drive and have saved my information? Thanks for any imput

Have a old macbook 2006 with newer 500 GB seagate Momentus hard drive. I did not backup any docs or pictures. The macbook crashed my fault. I took mac to apple store and they said logic board is bad. Can I purcase another used macbook and install my old seagate hard drive and have saved all my information? Thanks for any imput.

mgott55 wrote:
Can I install my used existing hard drive in a compatible macbook to save everything?
If you need to extract the drive's content you can remove it and install it in a $10 USB enclosure. It will be readable by any recent Mac.

Can I install Leopard on an external drive to run my computer?

Since it seems my hard drive has totally bit the dust, can I install Leopard on the external drive I use for Time Machine, and run my desktop from that drive? Could I run it from an external drive totally dedicated to Leopard? I am buying a new desktop soon, but I need info off of this machine. Can I plug in my Time Machine drive to my laptop and be able to use it without losing data?

Elizabeth Salcido wrote:
Thanks so much.
Youa re welcome!
I figured I would have to use a second drive. At least when I get my new desktop I will have a drive for Time Machine for both desktop and laptop.
If you really plan to keep the laptop around after you get your desktop, I would recommend replacing its internal hard drive. While running your laptop off an external is possible, it should be considered a stopgap measure. i wouldn't do it on a permanent basis. For one, as you'll find out, it's quite a bit slower than when using the internal drive.

HP 6280t Desktop. Can I install a 2nd IDE hard drive??

Similar Messages

Maybe you are looking for