Hp 630 is not switching on and does not charge
i was watching movie on my laptop while was charging suddenly its switch off its self, so what should i do.......please help
Hello shaepard
Thanks for posting on the HP Forums!
I understand you are experiencing an issue with your notebook. However, since this is a commercial notebook, you should post your issue on the notebook board of the HP Enterprise Forums for a better answer.
Have a wonderful day!
Mario
I worked on behalf of HP.
Similar Messages
-
My iphone 5c switched off and does not want to switch back on?
Hi all,
I need some help please... my phine switched off and does not want to switch on.
I have charged it on my computer for at least an hour yet there has been no luck. It is only about 3 months old.
Regards
NakkieThank you Razmee209,
This solved my question, I tried it earlier but I guess I did not hold it in long enough.
Thank you so much.
Regards
Nakkie -
The cooling fan comes on just after switching on and does not switch off any ideas
The cooling fan on my iMac comes on just after switching on and does not go off any ideas please?
Do a smc and pram reset, See if those fix it.
-
i have iphone 5 and when i connect it to my Sony S series laptop it does,t show any conectivity and does,t charge the mobile. there is no topic in user mannual as well. anyone can help me please????
Make sure that it is connected to a USB 2.0 port and not a USB 1.1 as 1.1 will not provide power for connectivity.
Try it in a different USB port and see if it works -
My MacBook Pro won't switch on and the battery charger light keeps flashing green and amber
Any suggestions of what I should do, my mac book won't switch on and there's a faint green and amber light flashing on the charger.
Sounds like bad battery
For more details, read https://discussions.apple.com/message/3884756#3884756
Allan -
Ipod nano not recognized by itunes and won't charge
Ipod nano is about 3 months old, worked fine before with itunes, but now ipod doesn't start itunes, doesn't show up in finder, and doesn't charge.
I have switched usb ports, reset the ipod, downloaded itunes 6. I downloaded ipod update, but computer doesn't recognize ipod so it isn't updated. I tried "restore", but again not recognized. I tried Isync but it can't find ipod.
Do I need a new cable that attaches ipod to computer?
powrmac Mac OS X (10.4.6)Hello,
The cord might be the case, but first, try these suggestions:
Try putting your iPod into disk mode, then try connecting it to your computer again...
<a href="How to put your iPod into disk mode</a>
Do you have a wall charger? If so, then try connecting your iPod to that, and does it charge, or not?
Have you checked this link out?:
<a href="http://docs.info.apple.com/article.html?artnum=60941">iPod doesn't charge correctly
Does your iPod appear in "My Computer"? If so...
iPod shows up in Windows but not in iTunes
If not...
iPod missing in "My Computer" or in iTunes
Post back on what happens when you try these things out. I hope this helps!
~~Kylene -
Changed batteries of keyboard -initially connected but now does not connect. Used a diffeerent keyboard -same result. Keyboard not seen in bluetooth devices.Switching on and off as well as re booting has not helped. Keyboard light continues to blink.
Hey Gautam5058,
Thanks for the question, and welcome to Apple Support Communities.
The following articles provide troubleshooting steps that may help to resolve your issue:
Apple Wireless Keyboard: Difficulty during pairing process
http://support.apple.com/kb/TS1569
Bluetooth Quick Assist
http://support.apple.com/kb/HT1153
You may also want to try resetting your computer's PRAM and NVRAM.
To resolve this issue:
1. Turn the Apple Wireless Keyboard off.
- For an aluminum Apple Wireless Keyboard, hold the keyboard's power button for more than 3 seconds.
- For a white Apple Wireless Keyboard, turn over the keyboard, and turn the power switch to the off position.
2. Click the "Continue" button as the Setup Assistant instructs.
3. Power the Apple Wireless Keyboard back on.
4. Enter the 8-digit passkey and press Return. Important: You MUST press Return after you enter the 8 digit code.
Thanks,
Matt M. -
Since upgrading to Lion OS 10.7.1, the wifi connectivity keeps blocking up intermittently and we need to manually keep switching on and off the wifi utility to get the connection back. even locking the preferred wifi network in system preferences does not help. This never used to happen with Snow Leopard
This is a big thank you to Rys Sinnefeldt who posted this fix.
Rys has made this fix very easy to do and takes literally 2 mins. It involves replacing the Atheros Lion driver 4.0 and replacing it with the snow leopard driver. Don't worry, Rys has made this so simple to do even I could do it and so far I have had no more wifi drops.
follow this link
http://rys.pixeltards.com/2011/09/04/osx-lion-wifi.html
Thanks again to Rys. -
My Ipad2 just shuts down and will not turn on. Rebooting does not help. He switched on when I start charging it. In this case, the battery is charged.
Standard troubleshooting steps in the following order:
1. Reset: Press the sleep/wake button & home button at the same time, keep pressing until you see the apple logo, then release. Ignore the slide to power off.
If no change, continue:
2. Restore your phone from a backup, note: if the problem is related to corrupt data, while this will restore a fresh OS, it will also restore the problem.
If no change, continue:
3. Restore as a "new" phone in itunes & re-sync your content. All saved data will be lost.
If no change, make an appointment at an Apple store. -
My network goes off and does not come back unless I switch off and switch on
I have a vodafone connection.
Whenever I go underground while traveling in train, my network goes off and but does not come back unless I switch off and switch on the phone... any suggestions???I would advice to perform a hard reset (holding Power button + Home button for at least 10 seconds until Apple Logo appears)
-
My iphone's screen goes black and it behaves like that it is switched off.No switches work and the power button also does not respond.The ringtone do not also respond.The only way to switch on the phone is to press home button and power button together.
Pressing the Home button and the sleep/wake or on/off button together until you see the Apple logo and then release is called a reset.
If no change after a reset, the next step is restoring your iPhone. -
Any advice on how to switch to ICloud on my 3g IPhone? I am supposed to install OS 5, but the dialogue box says that my 4.2.1 OS is the current version and does not give me the option of downloading OS5. Apple says I have to be running OS5 to switch.
"iCloud requires iOS 5 on iPhone 3GS or later, iPod touch (3rd and 4th generation), iPad, or iPad 2; a Mac computer with OS X Lion
From here > http://www.apple.com/icloud/ -
Dear all, I have a problem with charging. When i intend to charge my phone while its on, it does not charge. However, If i were to switch it off and put for charge, it charges. How do i fix this?Help.
First, update iTunes, then connect the phone to the computer and do a restore. This will also get your iOS up to date. Your phone should operate correctly after doing this, if not, you will most likely need to have the phone serviced or replaced.
-
My iphone 4 does'nt want to switch on and not even charging..... Help out i think its completly dead because its not even showing anything when i put it on the pc... What can i do please???????
This link may be helpful.
http://support.apple.com/kb/ts2755 -
Sometimes a web page appears with only text and no picures. It is not always the same site and does not always happen. If I switch to Explorer for the same web site it always works
Thank you, it worked with just F5. I don't know whether CTRL + F5 would work because the problem has not come back yet!
Maybe you are looking for
-
Hi, I need to create a dynamic table in run time Input from user will be like Param1---->'tablename' Param2---->'col1name datatype,col2name datatype,col3name datatype,col4name datatype,col5name datatype,col6name datatype........................' Para
-
I ENTERED MY BIOS OPTION BECAUSE I CANT INSTALL WINDOWS ON DISK, IT STATES THAT WINDOWS CANT INSTALL ON THIS DISK SO I WENT ON YOU TUBE AND RESEARCHED SOME VIDEOS WHICH NEEDS ME TO GO IN MY BIOS MENU TO DISABLE SOME STUFF. PLZ HELP This question was
-
hi I am on SRM 7.01 and using the classic scenario process SC created in SRM - > SC goes to approving ->Manager approved the Sc -> system create PR or PO or RS Automatically in backend as a follow on doc problem: when purchaser create sc and manager
-
Reconfiguring Hyperion after DB move from Solaris to Linux
Our Hyperion Databases are moving from Solaris to Linux. We need to reconfigure Hyperion EPM to point to the new Linux DB. We have 4 Hyperion servers A,B, C, D. Server A : Foundation Services, Workspace ,Reporting & Analysis, Planning, Calc Manager,
-
Service invoking another webservice
I want to create a webservice. First request i want to give insert/select as input. If I give insert as input it must take to another form with the fields of database and if I give select as input it must perform the select operation.