Hp 630 issue after bios update f.33

Hello,
i have an hp 630 linux (suse) version.
I have buy now a windows 7 cd, and want to switch to that os.
Before bios update (f.16) the installation was correclty done on the internal HD.
after the 1st install, i choose to update all and re-install the os (with dual boot)
now, seems that windows7 installation block saying (italian msg translated, so can be different)
'impossible to install on that hard disk, check installation log)
i have already try to do this in a lot of different way (using a live cd to partitioning the hd)
1. empty partitioning
2. ntfs partitioning (done on win7 installation)
3. standard os partitioning (done on win7 installation)
4. ntfs part on ubuntu livecd
5. empty partitionind (fdisk on ubuntu live cd)
the issue standing to internet forum is ahci impl on the notebook, i read that i have to turn it on, but bios doesn't have this option (actually this bios doesn't have a lot of option in any case, that is quite strange, maybe i miss something on how to configure a bios on hp)
Any help about that?

does anyone know a way to contact direclty hp via email?
this issue is quite blocking!

Similar Messages

Boot issues after bios update (U430 touch)

Hi all,
I've been having some problems after updating my BIOS on my Ideapad U430 touch. After updating 7CCN34WW to 7CCN35WW, Windows 7 would not boot. It shows the usual 4 colors swirling to the center and then it stalls. Interestingly enough, at the top of the screen, white dotted lines appear (about 1 cm thick). These dotted lines alternate, turning off and on irregularely. I've waiting at least a half an hour, nothing happens.
Now I figured out how to solve this, which is by changing the boot settings in the bios to Legacy instead of UEFI. After changing it back to UEFI everything works again. But every other day or so it still hangs during UEFI and I have to change the bios settings back and forth to get into Windows. Can anyone enlighten me on this issue? It would seem the bios update is faulty? What's going on? Can I downgrade the bios?
In addition, the following topics are related but not quite the same as they don't describe the exact problem I have.
http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/Bios-Update-flash-error-U430-Touch/m-p/1591...
http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/P580-BIOS-update-Cant-start-up-computer/m-p...
Thanks in advance,
Cheers,
Graham

hi gannixon,
Welcome to Lenovo Community Forums!
Yes it is possible that a UEFI / Secureboot check fails something in the OS UEFI boot after the update.
The system does not support a backflash feature, Reflashing the BIOS might need to be done in Lenovo Service Depot,
If you don't have much data on the unit, I can suggest performing a one key Recovery while on a UEFI mode.
Downside will be Deletion of current files and documents and back up will be required.
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Qosmio F50 issues after Bios update 1.50

Hello,
I updated Bios with version 1.50.
I'm working with audio software and I noticed performance issue (about 15% -20% drop in performance!!!).
Front Operational panel is also acting strange.
Now I can't turn the lights off or start Media center or anything else.
How can i downgrade the Bios on version 1.30?
Winphlash won't let me do this.
Please help!
Thank you

Actually, it is possible for a BIOS update to break the OS depending on what it changes (both under the hood and the visible choices).
The bios is essentially sitting between the OS and the hardware during boot, so if it suddenly changes the way it reports things the OS might not be able to cope properly. This is especially true in laptops where most of the hardware is integrated on the motherboard.
So if possible try to do a software restore as during the install the OS will rescan the hardware...
BTW, number one rule of BIOS updates is: Never do one unless it fixes something you have a problem with. Although, AFAIR toshiba almost never releases a changelog, so the rule does can not aply here.
Message was edited by: alt236

P67a-C43 Overclock Issues after BIOS Update

Hello,
After updating the BIOS to 5.1 (2012-06-12) I can't get a stable CPU OC. In the past I was able to OC to 4.5 with 1.3v CPU Core Voltage and it was stable and now even with 1.35v (max voltage) the system BSODs all the time. Further more, I can't downgrade the BIOS as the latest one updated some firmware that aren't compatible with the older ones. Even if I use the default settings for OC (OC Genie) the system is not stable (4.2 GHZ @ 1.35v - default).
Any ideas? Thank you !
EDIT: I've just seen some other members requesting "custom files" that allow them to restore a older BIOS version (1.I), if someone could make such a file for my p67a-c43, that would be great !
CPU: i5 2500k
MB: MSI P67A-C43
RAM: 2x2GB Kingston 1600MHZ DDR3
PSU: Corsair 750TX2
GPU: HD6970

Thanks for the help but unfortunately I couldn't revert the BIOS using the file you supplied.
I am getting the same error as with a manual update: Current ROM version is not compatible with something something.
I've used both the manual way and the MSIHQ USB Bootable Tool and BIOS Helper to no avail...

MOVED: P67a-C43 Overclock Issues after BIOS Update

This topic has been moved to Overclocking, Undervolting.
https://forum-en.msi.com/index.php?topic=160962.0

Thanks for the help but unfortunately I couldn't revert the BIOS using the file you supplied.
I am getting the same error as with a manual update: Current ROM version is not compatible with something something.
I've used both the manual way and the MSIHQ USB Bootable Tool and BIOS Helper to no avail...

After bios update side nomberpad is not workinh keys from 0-9

after bios update side nomberpad is not workinh keys from 0-9

Hello jay04,
Welcome to the HP Forums!
I understand the number keys do not work on your keyboard. I will do my best to assist you. First, I require the following information:
1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
3. Does this occur on certain programs, or all programs?
4. Have you installed any new software or drivers on this computer, before the issue appeared?
Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
Thanks!
Mario
I worked on behalf of HP.

My Qosmio F10 is dead after Bios Update

My Qosmio F10 is dead after BIOS update ... it doesn't work anymore .. i update the bios from 1.10 to 1.20
the switch Led is always orange...
what can i do to make it work again ? or return the 1.10 version?

Hi
You can check many postings in this forum about the BIOS upgrade procedure.
Mostly the users damage the notebook because of wrong BIOS or wrong BIOS procedure.
If the notebook is dead after this procedure so it could be a damage motherboard.
In this case only the Toshiba service partner can solve this issue. ;(

I can't activate windows 8.1 pre-installed on my Toshiba E45-B4200 after BIOS Update

I bought Toshiba laptop Model E45-B4200, at first time I could activate windows 8.1 like a charm.
Few months later Windows 8.1 has crashed, so I did clean install of pre-installed windows, no problem so far. Toshiba Application installer app has downloaded BIOS update, so I ran it.
I tried to activate windows after BIOS update, but it didn`t work. No error message, but Change PC settings window just got minimized every time that I tried to click on Activate Windows option. I thought that I did some mistake, so I repeated windows reinstallation, and same problem occurred again.
Now I can`t update Windows, Office 2013, and so on.
I`ve tried SLUI 4 command to force activation by phone, but it didn`t work as well.
I read on MS blogs that windows 8.1 stores product key on MSDM table, windows should be activated normally. Now I got no options now, can you help me?

It shouldn't need to be activated it. Everything should be automatic. Because it's asking you, that's already indicative of a problem. You might want to call customer support.
- Peter

Problem in booting after bios update

Originally, it was windows home basic was installed in my laptop. But recently I had installed Windows professional. After installation I have downloaded all drivers which are compatible for my laptop model. After BIOS update installation my pc is not booting up at all. Only power button, WiFi and capslock is lighting. Capslock is continuosly blicking. Even FAN speed gets lowered. I have tried hard reset as well as windows+B comand during startup still condition is same. Please reply me....

see help 8....
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

After BIOS update Satellite L350-172 doesn't start anymore

Satellite L350-172 Bios-Update from bios-20090203164614 to bios-201002250
I just updatet the BIOS of my notebook from 1.60 to 2,20. Now the Notebook doesn't start any longer.
"It was stopped for reason not to damage the Computer" - blue schreen.
How can I downgrade the bios again? Or - what have I to change in the bios-settings?

Hi schuwe,
Im a little bit confused about your posting. How do you tell your BIOS not to restart?
Anyway, after BIOS update you should load the default settings in BIOS.
Did you choose the right BIOS especially for your model?

Is there a fix for the wifi connectivity issue after ios6 update?

Is there a fix for the wifi connectivity issue after ios6 update?
Cannot connect to any wifi since update to 6.0.1
How do I get update to 6.0.2?
Will that even help?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Date format Issue after HRSP Update

Hi,
We are faced with a strange issue after HRSP update was applied on our client system (upgraded from SAP-KE-30 to SAP-KE-36).
There is an outgoing interface which picks up all the the starters into the local government pension scheme and updates a B2A document. This is implemented via a z-program.
When we look at the out put after the interface has run for the vast majority of employees it shows their date of birth as 21.05.1968 when it should show it as 21051968. This only appears to have happen after the HRSP's have been applied.
No modifications have been made to the z-program. What could be the reason for this issue. has anyone faced such an issue post HRSP update?
Any pointers on how to further investigate and resolve the issue will be most helpful.
Regards

Hello Iside,
In this case we can try to reload the software on the BlackBerry Smartphone to make sure it is running the latest version and there are no issues with the OS on the device.
To do this we would need to back up the BlackBerry Smartphone. Please open the BlackBerry Desktop Manager and connect your device. Click on the Backup and Restore options and select Back Up. Please note the location where the backup is being saved as we will need to access it later to restore the BlackBerry Smartphone.
Once you have backed up your BlackBerry Smartphone please follow the link below to complete a clean reload of the BlackBerry Smartphone software.
Link: http://www.blackberry.com/btsc/KB11320
Please test the date once the software is reloaded prior to restoring the backup.
Thank you
-DrP
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Hi . plz help me. after bios update. i could work till I shutdown

After bios update I could work till I shutdown my laptop g510 . Now when I press power button. White light near camera shows but again it goes off. Plzzzzz help me
I also pressed one recovery. Then pressed f2 and f9 f12 nothing working.

take it to point of purchase with proof of purchase if you can't find a Nokia care point near you
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

After BIOS update DVD driver do not read DVDs anymore - Sat A80

Hi,
I have a Satellite A80-131 and after bios update (last version 2.5) by windows procedure update, my DVD drive do not read DVD medias anymore. It is possible to read CD medias, but not DVD one.
Can I reinstall the old bios? Can I reinstall the firmware?
Thanks
Ronai Lisboa

Hi Ronai
Like Jimi has said in the posting above. It's very unusual that after BIOS updating the DVD drive hasn't read the DVDs.
Furthermore it's not advisable to use any 3rd party applications to DOWNGRADE the BIOS. Usually only the ASP can downgrade the BIOS. Such procedures are very serious and the wrong procedure can damage the motherboard.
However, it's nice that you have solved the problem and that the drive works properly.
Thanks for the feedback.

Satellite Pro L300: BSOD after BIOS update

Hi
after update the Bios of Satellite Pro L300, the windows not start!
Its show the blue dead screen!
What can i do?

Hi
Are you able to access the BIOS settings?
Im not quite sure why this BSOD appears but possibly the SATA mode settings have been changed after BIOS update
Usually the SATA mode should be set to AHCI if the SATA drivers are installed.
But if the SATA drivers are not included the SATA mode should be set to compatible.
Please check this!
Furthermore you could set the BIOS to the default settings and could try to boot the machine again.

Hp 630 issue after bios update f.33

Similar Messages

Maybe you are looking for