HP 6510 All in One will NOT print Black ink

I replaced my black ink cartridge & it will not print black ink. Yes HP genuine. I have tried everything I have read on here and elsewhere and it doesnot help  I have gone to 4 different stores and bought 4 different black ink cartridges thinking perhaps it was defective cartridges but no it is defective printer.... I see so many frustrated individuls on here with same problem, saddens me because I love my hp printer & pc's :/ my  A printer should definately last longer than a couple of years .....sstarting to hink hp is going down hill since they have no fix for something that is their products fault and nort the user....they should really offer a recall or free repair/replacement...so many people with exact problem

Hi Tam1711,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message after the weekend from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details)
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
I work for HP

Similar Messages

  • HP C6150 All-In-One Will Not Print Black Text But Does Partial Test Print

    Hi.  Thanks in advance for any help anyone can proffer.
    I've read through the forum and I think there are some similar issues, but none exactly the same as ours.
    This HP C6150 does print pictures, but suddenly stopped printing black text.
    HOWEVER, the test prints will print in black with the Windows Logo, but will not print any associated text.
    Odd.  It just suddenly stopped printing.
    Variables:
    C6150 All in One - No other problems for two years.
    Using refilled ink cartridges from outside source. (not my decision)
    Ink is full.  No other changes made in last three days.
    Troubleshooting Steps:
    Uninstalled and then re-installed software in entirety.
    Put in 'new' (refilled) cartridge for black and magenta.
    Tried (not sure if successful) soft reset.
    Tried cleaning the print cartridge with 'Q-Tip' and distilled water.
    Have not yet spent money on new OEM print cartridges.  That is next step unless other suggestions merit.
    Possibilities:
    It may be the refilled cartridges, but they've worked so well in the past.
    The cartridge prior to the recent replacement was working fine and was not yet out of ink.
    The print head might be damaged.  But this should/would affect all black printing and this is not the case.
    Were the driver corrupt, the reinstall should have fixed it ... you'd think.
    So, we're looking for some suggestions prior to going out and getting a new printer.
    Thanks again, in advance, for constructive non-judgmental suggestions.
    MackNC

    The likely cause is the black ink is not printing at all.  When printing graphics (like the Windows Test Page) black is made from mixing the color ink.  I would suggest printing an internal diagnostic test page as shown in this page.  Does the black block print?  If not then clean the printheads as described here.  
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP Officejet Pro L7780 All-in-One Will Not Print Blue Ink - It Prints Pink Instead

    HP Officejet Pro L7780 All-in-One -
    Issue:
    Blue ink will not print (It prints the color pink instead.).
    Actions taken:
    1.  Cleaned ink heads.
    2.  Replaced ink cartrige.
    3.  Reinstalled software.
    Sugestions by HP customer service:
    Purchase a new printer: Because the issue is software related - not reading the blue ink cartrige.
    Any suggestions or advice would be very much appreciated.
    Thank you for your time!
    Thank you.
    Sincerely,
    Ryan

    The cyan portion of the printhead may be clogged.  I would suggest running the diagnostics shown here.  If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.

    My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.  This is especially disconcerting at Christmas time when you're trying to get Christmas letters in the mail!  Any help?

    The cyan portion of the printhead may be clogged.  I would suggest running the diagnostics shown here.  If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP Photosmart 5510 will not print Black Ink!! - Time to "break-up" with HP

    I came upon this forum by doing a google search for the issue I'm having which is my HP Photosmart 5510 will not print black ink. The printer is a year and a half old and is used only for home office use (not a heck of a lot of printing being done)
    It started right after I installed new ink cartridges (all four of them) I want to mention hear that I ONLY buy genuine HP ink cartridges from Staples and when I replace my cartriges I replace all four at the same time even if one ink level is not considered "replaceably" low. When the issue started I thought I must have gotten a bad black cartridge so I went out and bought another one but was still having the issue. So that's when I did my google search.
    I tried all the suggestions (several times) on this post (which did not reslove the problem) : http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-Photosmart-5510-will-not-print/m-p/1...
    and I tried a "Hard Reset" as suggested here (again did not resolve the problem) :  http://h30434.www3.hp.com/t5/Ink-Toner-Cartridge-Printhead-Issues/Photosmart-5510-Will-not-print-in-...
    After trying all of these my color ink is less than half full....remember....I started with 4 brand new ink cartridges...so now, I'm out roughly $85 in ink just trying to resolve a problem that should not have happened in the first place!! Shame on HP for makeing such poor quality products. I gave up on HP computers years ago and now I'm giving up on their printers!! This HP Photosmart 5510 All In One printer replaced an HP Color Laserjet CM1312nfi printer (which cost approximately $400) that only lasted about 3 years. Sorry HP but that's it....I'm moving on! Consider this our "break-up" letter. 

    Hi TisKate, sorry to hear that you are having printing issues when it comes to printing in Black. I am also sorry to hear that you are breaking up with HP. I would like to offer a couple more troubleshooting steps before we say our fond farewells. Now this might sound silly but really it isn't. If you have the power cable connected to a Power bar/strip, please remove it and connect the power cable directly to a wall outlet. HP printers already have a built in surge protector and if you have it in a strip/bar, the printer will not get all the power needed to function properly. This can cause printing issues or false error messages on the printer display screen. Here is a document that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. 
    The other step I would like to take is on the printers display touch screen. Please use the right arrow key and go to the Wrench icon. Press the wrench and go to the Tools menu. Once in the Tools menu, please select Clean Printhead. Use the cleaning utility 2-3 times or until you see a change in the print status reports. It might take a few cycles but I am confident that it will make a difference.
    I hope you and HP can still be friends( friendly humor).
    Thanks for your time. 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • HP Photosmart 6510 will not print black ink

    I am 6 months past my warranty and suddenly the printer stopped printing in black ink.  Up to this point, I was very satisfied with the printer. I have tried all of the instructions from the support manual, but to no avail. This appears to be a common issue on the discussion board.  Very frustrating.... Please let me know how to fix it.  It would be nice if one of the HP reps, who have responded to all of these postings, would post the fix for this instead of having a private chat with the individual.

    Hi folks, 'm sure this has been a frustrating experience for you. I'd like to help. Please begin with the steps in the following document; Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Deskjet Ink Advantage an... If you complete, or have already completed all of the steps in the document above and the issue continues, my own personal recommendation, not one of HPs, is to use the solution offered in the following video.  I only suggest doing this if the printer is out of warranty; How to fix a HP Printer, not printing black ink and missing colours 
     Based on the comments, it looks like this will help  King_Zog wrote:
    I tried most of the suggestions in this thread, but stopped short of disassembling the print head. Nothing worked until I saw the video referenced in Sunshyn2005's message. That did work, but not on my first try. For the second attempt, I left the wet paper towels in place for a couple of hours to really soak the print heads. That did the trick. So, thank you Sunshyn2005, for pointing me to the solution.   - Source Although the printer might be out of warranty, if the issue persists, HP may be able to offer you something. Maybe they can offer you a discount on an alternate model. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide. If this resolves the issue, please let me know so we can help others who may be experiencing the same issue.

  • Will not print black. ink cartridge is new. also shows low black level with new cartridge.

    HP Photosmart C6180  all-in-one.  Will not print Black.  Also shows low black ink on ink level.  Cartridge is new and HP brand.
    In printing colors, very light and has RED hue as there is no black.  Also two other cartridges show low ink when all the cartridges have been replaced.

    Hi there,
    Download and run the print and scan doctor located here (amoung resolving some things automatically it can give us a better idea of what is going on with the printer). Give the steps outlined a shot and let us know the results.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • HP Photosmart B210a will not print black ink on plain paper... only on photo paper.

    Hi, I have an HP Photosmart B210a that wont print black ink.  I have used a whole set of ink cartridges by cleaning the print heads, allignment etc.  I just installed ALL NEW cartridges and the sae thing is ocurring. I have replaced plenty of cartridges and am experienced.  Just all of a sudden one day the printer stopped printing black ink on plain paper documents like with MS Word, excel and PDF, etc.  It's not set to greyscale either, actually it wont even print grey!  However, if I go to a photo with plenty of black in it, it will print it JUST FINE!!!  I'm at my wits end! I have followed EVERY head cleaning advice in the forums but it will not print black in except on photos... Please help!!!!

    The document here may help, although you have likley already done most of the steps.  Be sure to check the vents.  If the above does not resolve black not printing on your Photosmart b210a the post here may help.
    The black cartridge uses pigmented ink which is not compatible with photo paper.  Although the printer appears to be printing black properly on photo paper it is actually using color mixed together to produce black in this case.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • I replaced the black cartridge on my cannon 2100. Now it will not print black ink. Please help.

    I have replaced my black in cartridge and now my printer will not print black.  I am getting the message E16.  I cannot preform any of the maintenance tasks as it keeps giving me this message.  Please help.

    Hi @chicagoburb, 
    Welcome to the HP Forums!
    I noticed that your HP Photosmart 310 will not print with your replacement ink cartridge. I am sorry to hear this, but happy to help!
    Please see this guide, Fixing Print Quality Problems for the HP Photosmart Premium e-All-in-One Printer Series (C310).
    If the guide does not resolve your issue, please see this post, Re: black ink not working, by @Bob_Headrick.
    Otherwise, please call our phone support at 800-474-6836 for your upgrade options. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector. 
    Hope this helps, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Will not print black ink after installing new HP cartridge

    HP Officejet 4620, Windows 7....installed new HP black ink cartridge and now it will not print black at all. I followed all online tips in the help section, even cleaned the vents on the cartridge itself but only prints blank page. No error messages are shown. Diagnostics ran and says all is working correctly. Also cleaned printheads through 2 cycles still nothing. Any other suggestions? It was working just fine before inserting new black cartridge.
    This question was solved.
    View Solution.

    I just spent  1 1/2 hours on the phone with HP Tech Support but it was worth it.  They are sending a replacement printer no charge to me (expect I chose to pay extra for next day shipping).  Even though my printer is out of warranty!!!  I normally buy HP products anyway but will definintely stay with this brand based on their excellent customer service and support.  Thank you once again for your initial help online and for directing me on the right path!!!

  • 7520 all in one will not print photos from photo tray from computer

    7520 all in one printer photodmart will not print photos from computer from the photo tray

    Hi,
    By default it picks main tray, you have to tell it to pick papers from photo tray:
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Windows 7 64 bit, changed wireless modem, now c4500 all in one will not print.

    I had to have my wireless modem changed and now my 2 laptops will not print. 1). windows 7 64 bit.  2) windows xp, version 2002 service pack 3. The new wireless modem is from ATT u-verse 2wire892. I tried reinstalling on the windows 7 laptop and it tells me can't be installed on that operating system. I had it there before. I ran a Wireless Network Test Report and under the network name it still has the old net name not the new one, how do I change that?

    Found diagnostic utility at hp support.  Though I lost all jobs in the queue, printer is again working.  YEAH!

  • HP 5520 all-in-one will not print alignment page

    Printer printed page as if there was no black ink. Replaced cartridge and tried to align but would not print a proper alignment page. Replaced all cartridges.Page it prints is not recognized in scan. I have tried everything. UnPlugging, reload paper, new driver, new install, I need to print tax info and the **bleep** thing will not align, will not copy, will not print. Help

    The post here has links to a troubleshooting document for the Photosmart 5520.  If the steps there do not resolve the issue please call HP Support, even if the printer is not longer under warranty.  In the US or Canada call 1-800-HPINVENt, elsewhere see the document here for contact information.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • My hp f380 all in one will not print items in queue

    My printer keeps disconnecting from my computer or going offline and will not print things so they go into the queue and i am unable to view or print anything from queue

    Hi jaimi,
    I understand you're having some issues printing with your Deskjet F380 printer. I will certainly do my best to help you with this.
    This document here covers all of the operating systems and will guide you through a few things to get the print jobs our of the queue.
    Hope this helps, have a great day!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • HP Officejet Pro L7580-Will not print black ink after I have replaced cartridge.

    I Have an Officejet Pro L7580. It worked fine until I replaced the black ink cartridge. After replacing it I cannot print in black. I printed 1 or 2 sheets when first replaced-then it stopped (only the black will not print). After a hard reset it printed 1 or 2 sheets then stopped (printing the black). The quality test page did not print any black and there were globs of black ink on the page. The color prints fine and it show a full black cartridge. Followed multiple troubleshooting steps, to no avail. 

    Hi melissaccss,
    I see you have replaced a cartridge and can no longer print black ink. I appreciate the troubleshooting you have done so far, but please take a look at the following document to see if you have done all that can be done; Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems.
    If the issue persists, I recommend calling HP and letting the know the issue as well as the steps you have already completed. It may be helpful to even let them know you completed all of the steps in HP document #c01957673.
    If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

Maybe you are looking for

  • Fuzzy dip to white..and other issues

    hello every i hope someone can help me with these issues...1st off when i burn my movie on blu ray the dip to white doesnt seem rich...its kinda fuzzy towards the end of the effect....im using windows 7 with inteli7 [email protected] 18gb installed m

  • Problem while bpel process run's

    After creating process and make jar with bpelc (v2.0.11) on linux i try to deploy it on oracle pm. All right! Let's run it! And now...it stoped on client reply! (3 activite from begin of process, but it's not end of bpel model and process!) What is i

  • Won't see new memory

    I've got a new 8-core. Just installed a 2 gig memory kit from Crucial and the machine is not seeing it. The slots(DIMM3) that I put them in is showing as "empty". Crucial sent cards with this info on the static packet: 1GB 240 PIN 128Mx72 DDrs PC2-53

  • Material download issue

    Hello Experts, I am facing typical material download issue, please help me out to overcome this: - material number in ERP has lot of speical characters say e.g. - : = - DNL_CUST_PROD0 / PROD1 / PROD 3 / TAX all has bee done - Materials are already do

  • Imports like, totally suck!

    Hi! OMG, ok I'm like, trying to figure out why this doesn't work but I'm totally stuck :( If I import everything in java java.*; then why can't I use Vector!? It's like, in the java package because everything is in the java package! I'm really trying