HP 6520 Black Ink Not Working After Trying Fixes Listed

I have looked at the forums and tried the fixes listed...running a printer head cleaning, checking the vents on the ink cartridge...ect.  Black will still  not print...all other colors are fine.  Does this mean my printer is shot?  Does this meant the end on my relationship with HP?

Hi @kossoff831 
This does not have to be the end of your relationship with HP! I can help
Please take a look at the following post by Ciara_B; Black not printing on Officejet 4620, Photosmart 6520, Photosmart 5520, Deskjet 3520.
If the issue persists, Please be sure to call us. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
If you end up calling, please let me know the outcome of your call.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

  • Black ink not working after my computer did an update (2 new cartridges put in)

    Black ink stopped working suddenly.  Tried 2 new cartridges and they did not work.  Since the day before their was an automatic 'updates' on my computer I thought it was that, but making copies doesn't work either.  I already cleaned the print heads with still not even a hint of black ink coming out.
    Usually, when the ink gets low it will be light at first or streaky . . . not just none at all.  Could the update been a problem?

    The update is likely not related.  I would suggest going through the troubleshooting steps in the document here.   Be sure especially to check the vents as shown in solution six.  If the steps there do not resolve the issue soaking the printhead as shown in the post here may help.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP Photosmart 6520 - Black ink not printing after being replaced

    I have searched this forum and tried all suggestions to no avail. I live in Maine, USA. My printer will not print black, only colors. I bought new cartidges that gave the same result. I have had this printer for maybe 2 years and it is barely used. I am getting an error message 0xc19a0020. I have also followed resetting the printer instructions with no luck. I am appalled that HP sell such a horrible product with ZERO support on the support forum. I will not be buying another HP product!!!!

    The post here has links to a troubleshooting document for the Photosmart 6520.  If the steps there do not resolve the issue please call HP Support, even if the printer is not longer under warranty.  In the US or Canada call 1-800-HPINVENt, elsewhere see the document here for contact information.  If the above does not result in satisfaction please post back here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Apple TV does not work after trying to update software. Main light keeps blinking and on the screen shows itunes icon and a usb cable. What does that means?

    My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?

    The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
    http://support.apple.com/kb/HT4367

  • B110a black in still not working after trying all recommended solutions

    Hi there
    Black ink still not working after spending many hours trying to sort. I've cleaned the printhead carefull several times (is immaculate now) and run the system clean up and alignment functions several many times too. I've cleaned the metal connecting points. I wiggled things carefully. I've attempted printing multiple pages in b/w in case it was going to take a while to get the ink flowing again. I've replaced one (expensive) new black cartridge with another brand new (expensive) cartridge and still nothing. This machine is probably out of warranty but seriously not very old. It really ought to be working okay. We use it regularly a little bit every week. Any ideas?

    The document here has troubleshooting steps that may help resolve black not printing on your Photosmart b110a.  Be sure to check the vents as shown in solution six, step three.  If the above does not resolve the problem the post here may help.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP Officejet 4630 e-All-in-One Printer Black Ink not Working

    My HP Officejet 4630 e-All-in-One does not print black ink but the color ink is working perfectly fine even though the ink status shows that there is black ink left. After I've changed a new black ink cartridge, it will start to work again but after one day it stop printing black ink again. I've only printed a page the previous day and the ink status shows that there's black ink left in it (close to full). I've tried the methods stated here (http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03882718&cc=sg&dlc=en&lc=en&product=5305051) but the black ink still doesn't work. So how can I solve this problem??

    Hello @3oshua,
    Welcome to the HP Support Forums!  I see you are running into some print quality issues on your HP Officejet 4630, you are unable to print in black ink, even after replacing the cartridges.
    I see you have exhausted the steps listed here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, with no success.
    Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
    If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. I highly recommend you call our technical support at 800-474-6836, to see what options they have available for you. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www.hp.com/cgi-bin/hpsupport/index.pl
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Desk jet 4280 all in one - black ink not working

    I have a new blank ink cartridge with full ink level. Black photocopying does not work but colour does. I have tried resetting and restarting printer and removing and reinserting cartridge.
    Black printing from computer does not work either.
    Any suggestions? Thanks so much!

    Hi @Banana65 
    I would like to help you with the your black print quality. Please use the following document to troubleshoot the issue; Faded, Missing, or Dull Colors in Printouts.
    If the issue remains unresolved after following all of the steps in the link above, I recommend contacting HP.
    Don't hesitate to call, although the printer may be out of warranty, the cartridges could be in warranty; therefore, there wouldn't likely be a fee for the phone support. HP will, at HP's option, either replace products under warranty that prove to be defective or refund the purchase price.
    They could even determine after troubleshooting that it is a problem with the printer, in which case they may offer you a discount on a newer model.
    The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
    To find the “Warranty Ends” date, look in the following table for the date's location on each product. The date follows the YYYY/MM/DD or YYYY/MM format, where YYYY indicates the year, MM indicates the month, and DD indicates the day.
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HP Photosmart 6510 Black ink not working correctly.

    Replaced all the ink cartridges and the black one does not work properly. It prints greyish blue during the printer head cleaning. I've tried all the troubleshooting procedures that others have done multiple times.
    I also got an error "0xc19a0013" today after I plugged the printer back in.
    It is not currently under warranty. Please advise!
    THANKS!

    Hello jeremydraul,
    Welcome to the HP Forums! I hope you enjoy your stay here.
    I understand the black ink is not printing properly and now you're receiving a message "0xc19a0013". I will do my best to assist you! Please make sure this printer is plugged into a direct wall, not a surge protector.
    Please follow this HP document on 'Ink System Failure' or a '0x...' or a 'C2...' Error Message Displays on the Front Panel.
    Let me know if this document resolves your issue or not.
    Have a great night!
    I worked on behalf of HP.

  • How come my mini iPad is not working after trying to update apps?

    My mini iPad is repeatedly showing me a black screen with a, "white apple," in the middle & then a couple of minutes later it turns off for a few minutes. Then the black screen with the, "white apple," in the middle comes back on again and then it goes black again. Sometimes the black screen would lighten and the whole pattern of these "screens" would start over again. It's been doing this for hours since I fell asleep.
    This happened when I was trying to update 4-5 apps at the same time. It had trouble updating the, "Pinterest app." It failed once and I retried it and that's when my mini ipad started to not work. I can't use it at all. I never had trouble updating several apps at one time before. I was at home using my wifi and my wifi strength was at its maximum for the iPad.
    The battery was at 40 something%, so I charged it over night. It has the latest iOS update software. I had downloaded that yesterday.
    I plugged it into iTunes on my computer and the same thing is happening. It's picking up my icloud stuff like my music and videos and my computer is trying to import photos from my mini ipad automatically, but my iPad isn't fully recognizable on iTunes. I get 2 error messages. One says, "iTunes was unable to load data class information from Sync Services. Reconnect or try again later." I also get an error when trying to import photos (just to try it out). The other error message says, "The iPad cannot be sync because this iPad cannot be found."
    And so, I unplugged it and plugged it back in and I get the same response. My iTunes is the latest version.
    I don't have warranty on this iPad and I spent like $500 on this one. I'm kinda worried...?
    Any kind of response would be appreciated....

    First, try a system reset although I can't give you any confidence.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Black ink not working

    my hp photosmart premium c390g-m installed a few years ago has been working fine.
    now will not print in black. new cartridge has been installed. cleaned printhead.
    alignment fails.
    do i need a new printer?

    Hi dani-d,
    Welcome to the HP Support Forums! I understand you have been using your HP Photosmart C309g for a few years with no problems, you recently changed the cartridges and now you are unable to print in black ink. You have cleaned the printhead but the alignment is failing. I would like you to try a few troubleshooting steps to try and resolve the alignment fail and print quality issues before I can make any suggestions regarding a new printer. Are you getting any other error messages on the C309g? Please complete the documents in order to try and resolve the issues you are experiencing:
    1. 'Printhead Problem' or 'Printhead Appears to be Missing or Damaged' Message Displays on the Computer- This document has you clean the printhead and contacts to make sure no ink has dried up and clogged the nozzles.
    2. An 'Alignment failed' Error Message Displays on the All-in-One- Next you will make sure the cartridges are properly installed and vented, and clean inside the printer.
    3. Now you will start Troubleshooting Print Quality Issues, here you will make sure all of the print diagnostics are printing fine and there are no more issues.
    Please let me know if this was helpful, I will watch for your reply.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Photosmart 7520 black ink not working

    My brand new 7520 appears to have given up work already. Black ink is out of order.During printing it started to generate unprinted stripes and after two pages no more black ink was put on paper.Although the almost new cartridge should still do it, I have replaced it by a new HP original brand cartridge.The problem however persists and no black ink still put on paper.I cannot see any physical defect. What shall I do?Swift feedback is appreciated. 

    This looks like a common issue with the printers sharing this printhead. It's the printhead failure, and it manifests inself in the printer stopping printing in black. I have a one year old printer, days away from the expiration of its warranty. All of a sudden, it stopped printing black. There's lots of discussions on the internet about letting the printhead soak in warm water and similar home remedies. None of this helped me. Now HP will be replacing my printhead, this time for free. But more generally, it's too bad they can't design a printer which would last more than a year. My previous printer C7250 developed a similar problem, the infamous "ink system failure", but unlike 7520 it doesn't have a removable printhead. So this basically just bricked my printer, had to throw it away. The cost of fixing it was more than buying a new printer.   

  • WLan connected, iPad and iPhone internet ok, iMac not working after trying everything (manual ip etc...)

    I am quite new with a mac computer. But i think i nearly tried everything, i have no idea what else could help...
    My iPhone and iPad are working perfektly in the wlan. My iMac works very rarely. Yes it worked once by manual ip, but later it did not work again.
    Wlan always works (sometmes it takes a few seconds until thesymbol is fat, mostly it starts with "no internet")
    I tried so many things...
    - manual ip found out by my windows pc
    - $ in front of the password
    - the apple faqs on the websites
    Very strange, but i hope someone solved an comparable problem already ;)
    Thx!

    I had a surfstick before, does that influence the whole thing?
    And another thing: in other wlans the iMac worked perfectly... Without any manual settings etc.
    Anyone an idea?

  • Internal Webcam and Microphone not working after Screen Fix

    I own a HP Envy Spectre XT Ultrabook, and last week I tried to use the webcam and the microphone for the first time in a few months.
    However I was shocked to find that Skype kept saying that the webcam was not detected. The microphone also could not register any sound.
    Device Manager did not show any imaging devices or the webcamera, even after setting it to view non-present devices.
    A check using msinfo32 did not review the webcamera either, and there were no problem devices.
    Control Panel >> Sound showed that the Internal Microphone using IDT High Definition Audio Codec was enabled and working, however it could not detect any sound. All drivers are checked to be up-to-date.
    I suspect this has something to do with the screen repair last month which a HP on-site technician came down to replace my screen, although I cannot be 100% sure. Although the screen is now working, the technician did not do a good job reassembling the screen - the bottom left corner of the screen cover has not be able to attach properly to the screen. 
    I have gone through my BIOS setup to make sure that there is no webcam disabled.
    I have tried rolling-back and reinstalling the drivers for the microphone but it did not work.
    I have tried uninstalling CyberLink YouCam (laptop preinstalled webcam software).
    Please help, these two components are very important to me as I am going overseas soon. The laptop is still under warranty.

    Hey ajun,
    Thank you very much for the information!
    For troubleshooting your Webcam, I would suggest taking a look at the document Webcam Troubleshooting (Windows 7). I would suggest the two options Video does not appear in your webcam software (such as YouCam, Skype, Messenger, ect.), and Webcam is not listed in Device Manager.
    For your internal microphone not working either, please take a look at the document Resolving Microphone and Line-in Problems (Windows 7). From this document, I would suggest following the top two symptoms.
    Please let me know the outcome of these troubleshooting steps.
    Good luck, and have a great day!
    I worked on behalf of HP

  • ITunes error - will not work after trying to update to 7.2, then to 7.3

    I have tried to update to both 7.2 and to 7.3, but both updates have failed. Now I am stuck on 7.1 with an error, where my iTunes will not operate and I cannot uninstall because it comes up with the same error that I get when I try to install or uninstall.
    Below are links to images of the errors:
    Here is the error I have currently:
    http://i11.tinypic.com/4qfw4yc.jpg
    Here is the error I get when I try to reinstall, update or uninstall:
    http://i7.tinypic.com/6he0ft0.jpg
    I would appreciate your assistance!

    It sounds as though you need this article on trouble installing iTunes:
    http://docs.info.apple.com/article.html?artnum=93976
    You need the section at the end after "Important: A majority of customers..."
    I think you need to do a full removal of iTunes and quciktime with clean up. But the important bit is to clean up the installer files with the MS Installer Clean Up Utility.
    If cleanup doesn't seem to work, it is worth checking you have the right version of the Windows installer. If you find it in add remove programs, it should say "Windows Installer 3.1 (KB893803)"

  • HT1414 Ipod Mini not working after trying to update to IOS7

    Team Apple....HELP!
    I recently tried to in tall the new IOS 7 on my Mini Ipad....but I get the connect to Itunes with USB cable on the screen. 
    I've intalled the latest updates to the OS on my MAC Laptop and the latest version of Itunes.
    Itunes saw a system that needed to be restore and took two hours to down load something (sorry, can't recall).  After the down load, I'm still stuck with the conect to Ituense with USB cable on the screen.
    Ok, I've tried all the below intsrutction from these links, with no success:
    http://support.apple.com/kb/HT1414
    http://support.apple.com/kb/HT1808
    http://support.apple.com/kb/TS1591
    Any help or suggestions would be appreciated.
    G

    First, try a system reset although I can't give you any confidence.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Maybe you are looking for