Hp 6520 no longer connects to web on touch screen

I cannot use anyapps on 6520 printer that requires connecting to web. Keeps stating cannot connect to web. It use to but no longer. Printer show it is connected with a 5 bar signal strengh and states my network name and says connected when touching icon on screen. I can print from computer and scan to computer but nothing else fro apps that require web acces. I have gone though all the different remedies that are posted in this forum to no avail. Have been trying for days. Why would it just seem to quit web access for no reason. My computer is a Mac Pro desktop using Airport Expree 802.11n Wi-Fi
This question was solved.
View Solution.

Hi @vode5,
Welcome to the HP Support Forums. I undestand that you are getting a connection error message when trying to use the apps on the front panel of your Photosmart 6520 printer.
Please set a manual IP address and manual DNS servers for the printer. I have included a link to another post with the steps, including screen shots, on how to do this. Please don’t worry that the screen shots show a Photosmart 7510 printer, the steps are the same.
Please let me know how it goes.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

  • Connect iPad to a touch screen monitor

    I have 52" touch screen display and would like to connect my iPad to this display via VGA and still have the touchscreen monitor function both on the iPad and the 53". Ideas? I have the iPad 2 so with a VGA connection all my iPad screens project out but I would like to touch the screen and have the iPad be operable as well.

    Matthew Smith wrote:
    Jailbroken discussion is not allowed here. It is very unlikely an enterprise app could be able to do this.
    I would think that a touchscreen needs connection via USB as well as VGA. Since the VGA adapter connects to the dock port you cannot use any other type of connection with it. Even so, it would require some way of accepting external pointing capability which is not in iOS.

  • Mac pro no longer connects to web via internet sharing

    My Mac Pro does not have an airport card so I have often used a PowerBook G4 or MacBook Pro to share a wireless internet connection via ethernet. A few months ago this method began failing but I was able to share a connection via firewire. Now I am not able to do either.
    I have attempted to use both the mbp and the pbg4 to no avail using both ethernet and firewire for days, employing various troubleshooting methods including zapping PRAM, repairing permissions, and dumping network cache. I've tried static IP addresses and manual setups. The mac pro shows that it is connected to a network and displays all the proper IP information but is unable to load a web page and the diagnostics window shows an ISP, server, and internet failure regardless of any changes I make to network settings on it or the mbp/pbg4. Meanwhile, the laptops are connected to the internet just fine and are able to share a connection with each other.
    What can I do to make my tower susceptible to internet sharing once again?

    Your local LAN runs through your router.
    All your ethernet  ports, and your modem and router, should be behind and filtered from excess current. That means a UPS generally. And run input line thru UPS (coax) first, then run RJ45 back through UPS again (there can still be excess surge or current on the line).
    Modems and routers can be compromised by surge outage or storm. So can ethernet  ports.
    You have two ethernet ports and you tried with both also.
    What you did not do that I would have added is SMC Reset / Reset NVRAM/PRAM.
    This is what I have had for the last year, very nice and stronger  signals thruout the house.
    http://www.amazon.com/NETGEAR-Wireless-Router-Gigabit-R6200/dp/B008HO9DIG/

  • Last night Firefox no longer connects to web, but IE 9 does. Why?

    last night while checking google news, I did a refresh and nothing happened. quit firefox, re-started, and home page which is google news did not cocme up.
    restarted computer and still firefox won't connect.
    however, IE 9 did. Has IE 9 got some blocking function?

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    * https://support.mozilla.com/kb/Server+not+found
    * https://support.mozilla.com/kb/Firewalls

  • HT1414 After restore that showed error code 40 and showed USB connect with itune on touch screen.

    My problem
    1. can't open my i-phone showed as picture and then i try to restore but showed error 40.
    Now still can't swith on my phone.I would like to solve and repair this phone.
    Please help me for solve this problem.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • I can no longer connect to the web

    I've got an iPad 2, about 3 years old and I can no longer connect to the web.  I do get e-mails, but they come when they feel like it.  I don't have trouble getting on the web on my iMac. Thanks for your help and please answer as you would to any neophyte.  Cheers

    Are you properly connected to WiFi?
    Is your iMac using the same WiFi?
    What happens when you try to reference a WebSite?

  • N95 NO LONGER CONNECTS TO THE WEB

    I have been using my n95 for about 6 months to browse the internet but 3 days ago when I tried to open my browser it did not work.Whenever I press my web button the screen simply refreshes & nothing else happens (there is no error message to say why it will not work).I have contacted my service provider whom I also have an internet plan for my phone through & they have said that everything is fine on their end so it must be the phone.I am really at a loss as to wot to do as I have not done anything to my phone (no updates,no new applications) that might have caused this.If anyone has any ideas or solutions I would greatly appreciate it.

    nvm I just did a HARD restart & it fixed the prob

  • Safari on iPod touch will no longer open any web pages even after reset.

    My iPod touch will no longer open any web pages via Safari. I am connected to WiFi and other apps work fine (mail for example). I connected to Itunes and did a reset - still no luck. S/w is up to date for this version of touch - 4.x.
    Please help with any ideas?

    hello susnyk, please see [[Fix problems connecting to websites after updating Firefox]] &
    [[Firefox can't load websites but other browsers can]]

  • Can no longer connect to encripted wireless.

    Hello,
    I am running a wired and WPA TKIP Encripted wireless network through a WRT350N and Netopia DSL modem. I have a Western Digital Mybook Premium 500GB hard drive connected for storage.
    The system had included 2 XP Home PCs one using a Linksys WMP54GS Wireless PCI adapter and the other using a Netgear “G” USB adapter configured through Windows since the Netgear software would only do WEP.  There are also 2 laptops one being an older model with the Linksys “G” PCMCIA and a newer Core2Duo using Intel Proset.
    February I built a New PC which I connected via CAT5 which required moving the WRT350N, modem and 500GB MyBook into the computer room. In this room we also have our Dual mode 2.4 Ghz Linksys CIT300 Skype phone and our 2.4Ghz main phone. The new PC also has a Logitech G7 mouse using 2.4Ghz wireless. Everything ran smoothly for just over a month.
     Around the same time as the start of the network connection Issues I swapped the Motherboard in the New PC with an SLI version and set the machine back up still using CAT5 and no wireless.
    I cannot say for certain that we didn’t have any issues before the time of the swap but it did become very noticeable around the same time and I just want to cover all the bases.
    What happened is the wireless PCs slowed down a bit and then the Netgear connected PC started to have disconnect issues that were very noticeable since it was the machine that pulls our e-mail. We then noticed the Linksys G Desktop having connection speed issues and then finally all the wireless machines will no longer connect via encrypted wireless at all. If I reset the Router they connect without a problem. I can change the SSID and turn off the SSID Broadcast without a problem but the moment I turn on WPA Personal, TKIP, and set a password they all lose connection and will refuse to connect. I have sat down at each machine and deleted the wireless profiles and set them up with all the same SSID, Security, and keys but they will not connect.
    I even ran Net Stumbler on my Laptop to look for other wireless networks but only find one on Channel 11. Mine shows up too but at Channel 1 using the 40Mhz channel. Network mode is set to Mixed, Radio band is auto, Wide Channel is auto, Standard channel is also Auto.  
    Is there anything else I may be missing? I have reset the router many times and have tried restoring from saved configurations but nothing works at all. The only thing that works now is the wired connection. L
    I sure hope Linksys reads these forums because they sure do not read their tech support e-mails!
    I look forward to any help.
    Thanks,
    Martin

    First of all, re-download and re-install the latest firmware for your router.  After installing the latest firmware, make sure you reset the router to factory defaults, then set up the router from scratch.
    Next, make sure you have a unique SSID (don't use "linksys" ), and turn on SSID broadcast.  Turning on SSID broadcast makes it easier for your computers to find and stay connected to your router.   I used to recommend that SSID broadcast be turned off for security reasons, but this is no longer required because new "cracking" techniques have made this old trick useless.
    As a test, turn off all your 2.4 GHz devices and unplug them from the wall.  This would include your phones, wireless mouse, and any Bluetooth, wireless baby monitors, microwave ovens, wireless keyboards, etc.   Also, turn off any 5+ GHz phones, as some of these also use the 2.4 GHz band.   See if this makes a difference.
    Since your Netgear "would only do WEP", I don't understand how you ever got it to work before with WPA encryption.  Please explain.  Are you saying that the Windows software was doing the WPA for you? 
    Update you computers with the latest drivers for your wireless adapters.
    As infinityx mentioned, update Windows XP to at least SP2.
    It sounds like you may have the Intel Pro Wireless 2200bg card.  If so, this card is known to have connection problems.  The problems with this card worsened with a recent Windows update, but were fixed with the latest driver.  Go to the Intel web site and download and install the latest drivers.
    Also, you can try another channel on your router.  Since you have a neighbor on 11, try any channel 1 thru 6.  (Always try to stay at least +5 or -5 channels from your strongest neighbors.).
    Message Edited by toomanydonuts on 03-16-200704:01 AM

  • My Mac Book Pro suddenly will no longer connect to the Internet at my house. Help?

    My Mac Book Pro suddenly will no longer connect to the Internet at my house. My son's MacBook connects just fine. My MacPro connects at work, at Starbucks, etc. just fine, but not at my house. My son's however has no problem whatsoever. I assume that since his computer connects that the router and modem is not the problem. And since my computer connects everywhere but here . . . . it is not a hardware issue. When directly connecting my MacBook Pro to the modem or router the problem was the same. . . no connection. Help?

    From the menu bar, select
               ▹ About This Mac
    Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.

  • Lightstreamer no longer connects after upgrading to FF9 ?

    My application uses Lightstreamer JavaScript to connect to a Lightstreamer server. Everything has been working fine. Upon upgrading my FF to version 9, the Lightstreamer connection no longer connects. All previous version of FF work fine.
    What did you break?

    1) You get more flies with honey than vinegar
    2) What technology of Lightstreamer are you using? Web Sockets? HTML5?
    3) How can someone test this?

  • IPad no longer connects remotely to my iMac

    I got Splashetop Remote Desktop for the iPad the other day and it worked great for a few minutes but then it simply stopped working. It would no longer connect to my iMac remotely. But the worst part of it is now none of the remote apps on my iPad are working either. I'm talking about apps like Air Video, Remote HD, Rowmote, and Mobile Mouse. None of these apps will connect to my Mac anymore when they worked perfectly before. Same goes for the Apple Remote App with home sharing turned on. Interestingly, the same apps still all work perfectly on my iPod Touch (minus Splashtop Remote Desktop) which I don't have for the iPod Touch).
    Clearly Splashstop Remote did something to the connection between the iMac and the iPad because everything was working before I tried it for the first time.
    I've erased Splashetop Remote from the iPad and uninstalled its server application from the iMac. I even did a full reset of the iPad followed by a restore from a few days ago. Still nothing. Wifi on the iPad has been working fine the entire time as I can surf the web, check email, Twitter, etc... So it's just remote access apps tat won't work anymore even though essentially the same apps on my iPod Touch still do work. Firewall is off and I don't use antivirus software.
    It might help to add that all the remote apps on the iPad keep timing out. Also, occasionally Rowmote quickly flashes some sort of "GFL Socker Error" message. It flashes so fast it's impossible to read it so the first part may be wrong. I definitely saw the words Socket and Error though. It's really the only thing I have to go on.
    I've also repaired permissions on my iMac.
    I would really appreciate it if anybody could provide any help. I've already worked on this issue for a few days and so far the developers of Splashtop Remote hace been no help. I don't know if this is an IOS or OSX issue or both?
    -PN

    Since you purchased a copy of Remote HD, send us an email at [email protected]
    We will assist you in getting your iPad back online again.

  • FTP no longer connects to hosting server after the latest update.

    I was able to successfully connect to the web hosting server yesterday before the update. Today, after the update I can no longer connect to the hosting server via FTP. Any suggestions?
    Thanks

    Check your site definition settings in Site > Manage Sites. 
    Nancy O.

  • Can no longer connect to Photostream after installing Photos

    Photos has deleted my iPhoto Photostream and Shared photos sidebar items.
    iPhoto can no longer connect to iCloud photos. Does anyone know if this is because the Photos app has made this feature incompatible now? I am concerned I'll not be able to get access to this feature again. It's a big worry!

    Same thing here on all my devices. Basically it seems like there is a web page that the device attempts to connect to confirm internet connectivity after joining a WiFi network which seems to now be a bad link.

  • Apple tv can no longer connect to Windows PC home computer

    Apple TV could no longer connect to Windows 7 PC home computer.
    This happened after several Windows updates and Mcafee updates.
    After reviewing the web for people with the same problem, I found that you can get your Apple TV back the way it was by:
    1. Remove Mcafee and install Microsoft Security Essentials (free from the Microsoft website), then
    2. Start the Windows Firewall from the Control Panel, then
    3. Click on the left pane click on "Allow a program or feature through the Windows firewall", then on the new window
    4. Click "Change Settings", click Yes to the pop up window, and
    5. Select both Bonjour Services one at a time, and check the box that says "Home/Work(private)" network. Click OK at the bottom and you are done!
    I was thrilled when I got my Apple TV back to normal.
    Good luck.

    mcafee is a horrible piece of software along with norton the only reason they have tons of users is because they pay pc makers to preinstall it and most nonTech users just pay up after the 30days of free virus scanning

Maybe you are looking for