Hp 6535b drops usb connection with kvm.

I have a hp 6535b and have a kvm attached to it. It drops usb connection on a regular basis and it is very annoying. I am not sure what i shoud do about it so any help will be appreciated.

Hi!, Ranothil: If you have the next cable and "null modem" (http://commerce.hpcalc.org/serialcable.php), you can transfer, anydata, from HP50G, to PC and viceversa, across Connectivity Kit (Conn4x), without problem. Please, see this link, with instruction's, for transfer data with serial cable, null modem and connectivity kit ... http://sense.net/~egan/skb/ and/or ... http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/archv017.cgi?read=125259 Note: Better, if you transfer data, from HP50G to, PC and viceversa, across the microUSB.

Similar Messages

Proxy client (over USB connection) with DHCP assigned IP address doesn't work with FRDM-K64F

Hello,
after reading about the issues on this forum with a static IP address on the Freescale FRDM-K64F board I went for an DHCP address but I can't get the proxy client to work over a USB connection with DHCP either.
My console tells me the following:
RTC Time: Wed 2014-01-01 00:07:27
Network initialized
IP Address:      10.143.xxx.yyy (xxx and yyy is real numbers, just changing them for the forum to letters)
Subnet mask:     255.255.252.0
Gateway:         10.143.xxx.yyy
MAC-address:     00:0c:00:06:70:00
And when I try o to connect with the following command :
java -jar proxy.jar -socket 10.143.xxx.yyy
I get the following output and no CLI interface:
Trying to open socket connection with device: 10.143.xxx.yyy:2201
Connected to the socket: Socket[addr=/10.143.xxx.yyy,port=2201,localport=49605]
Open channel 8 with hash 0x130399b3
Channel 8 CLOSED -> OPENED
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 OPENED -> AVAILABLE
Open channel 9 with hash 0x0
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
I don't know if this matter but my java version is:
java version "1.8.0_31"
Java(TM) SE Runtime Environment (build 1.8.0_31-b13)
Java HotSpot(TM) 64-Bit Server VM (build 25.31-b07, mixed mode)
Any ideas or am I missing something completely?
Thanks
Andy

Hi, Andy. Please excuse my ignorance, I am very new at this ME embedded stuff. I had my challenges, but was finally able to get my board up with a static address. I went through a lot of headaches, but finally got the board flashed with the latest bin. I then updated the jwc_properties.ini file on the SD card to include:
# Whether static configuration or DHCP server is used do get IP address. Possible values: dhcp,static
ip.method = static
# IP address,used with static IP configuration only
ip.addr = 192.168.0.30
# Network mask,used with static IP configuration only
ip.netmask = 255.255.255.0
# Network gateway,used with static IP configuration only
ip.gateway = 192.168.0.1
# DNS server,used with static IP configuration only
ip.dns = 208.67.222.222
# MAC address
mac.addr = 01:02:03:04:05:06
I was then put the card into the board, disconnected both USB cables, and then powered it up. From that point I was able to ping the board. I can now use Device Manager in NetBeans to connect to the device.
I am struggling quite a bit with many issues. It seems that when I try to stop the app from NetBeans, the "please wait" dialog hangs forever. I have to use Windows Task Manager to kill the "JavaW" process tree and reconnect the board.
I have also had trouble understanding the GPIO pin assignments. Another gotcha was trying to use the AutoStart feature. Since the sample app never cleanly exited, I thought that I bricked the board. The secret is to power it down, remove the SD card, and then delete all files EXCEPT the jwc_properties.ini file, put the SD card back in, then power up. It seems that the board forgets that the MIDlet was installed.
Hope this helps others out there.
Please everybody, post your experiences here. There seem to be very few of us, and finding pearls in the dust is rare right now.
Regards,
Pete

UPS, USB-connectable with: UPSmart2000i. Is there software, compatible with Mac OS X 10.8..?!

I bought a 2000 VA interactive UPX ( Turbo-X brand, "PLAISIO" stores' proprietary, Greece), USB-connectable with software for Windows provided: upsmart2000i.
Is there other software available for it, compatible with Mac OS X 10.8..?!
I attempted to install the APCAGENT.app along with the "Growl": after installation, the APCAGENT.app was not able to find the IP address of the ULS or to establish any communication with it; it didn't even detec the presence of the already running GROWL app.

TYPOS CORRECTED:
...a 2000 VA interactive UPS ("Turbo-X" brand.....
...the APCAGENT.app wan not able to find the IP address of the UPS or ti establish....
....didn't even detect the presence...
Generic UPS software Mac-compatible needed
Apologies for typos and any inconvenience

MacBook Pro dropping bluetooth connection with HP Officejet 100

I've recently started developing problems with my MacBook Pro (OS X 10.7.4) maintaining a bluetooth connection with my HP Officejet 100 Mobile Printer.
The problem I'm seeing is that when I send something to the printer, everything starts out okay, but then after about 10 seconds, the bluetooth icon in my status bar indicates that it is no longer connected. The printer pauses for a minute or so and then spits out the half-printed page.
Anybody else seeing this? Any suggestions on how to fix?

I have a similar issue, albeit a different bluetooth printer from yours.
According to a review on CNET's website, the dropping of bluetooth connections seems to have been introduced in the 10.7.4 update and did not exist in the 10.7.3 version of the Mac OS X Lion software.
MacBook Pro with Mac OS X 10.7.4 (Lion)
Canon Selphy ES30 with Canon BU-30 USB bluetooth adaptor

External hard drive constantly dropping USB connection

Last week I bought a 1 TB drive from Hitachi to use for video storage and rendering, but it seems that every 15 minutes or so, the USB connection drops itself and then immediately reconnects. This of course proves to be a problem when it happens while I'm transferring data. I've had a number of uploads fail because of this and I don't want to start editing several hours of HDV video in FCP only to have the connection constantly dropped.
Any thoughts/suggestions?
Thanks.

I've recently started having similar problems with my external USB devices - including a 500GB Western Digital External USB drive. But it's not just the drive. I have a USB hub plugged into the left USB port and the whole thing was switching on and off - turning off my mouse, disconnecting my USB drive and restarting my iPhone charging (and restarting iPhoto every time, of course, to download any new photos).
Initially I suspected the USB hub (which has it's own power supply) had gone bad somehow but after reading about all the problems MacBook Pro owners have been having with their USB devices I'm not so sure anymore.
Trying the right USB port now to see if it exhibits the same problems. So far it's working fine with just the drive plugged in. I'll let you know.

USB connection with PC is not working after updating firefox OS 1.3 to 2.0 on my device. How to fix this?

After updating OS 1.3 to 2.0 usb connection to PC is not working. I am using firefox os device Flame. I cannot share files with my PC. Please help me to fix this problem.

''Ralph Daub [[#answer-694088|said]]''
<blockquote>
Hi Raiyad Raad,
I'm sorry to hear that you're having issues when connecting your Firefox OS device to the PC, after updating it from v1.3 to v2.0.
Please ensure that USB Storage and Media Storage are activated.
If you are still having issues after activating USB storage and restarting your device, please write back to us with the following information:
* What is the model of your phone?
* What is the OS version and Build ID found in the Device Information page? Please visit [https://support.mozilla.org/en-US/kb/how-do-i-find-what-version-firefox-os-i-have this link] if you need help finding the Build ID of your phone.
* Please describe the steps you took to update your device.
* Please provide the exact steps to reproduce the issue you are encountering.
* How often do you encounter this issue?
Please be sure to include as much detail as possible, including any websites that may exhibit this issue, and any error messages that you may be receiving, exactly as they appear. This will ensure that we have all the necessary information to investigate this behavior.
- Ralph
</blockquote>
I've activated the USB storage and media on the phone. But still it's not working. I'm using T2mobile Flame and my OS version is 2.0. Build ID: 20141016183911
I've written a blog about how I updated it here: http://raiyadraad.blogspot.com/2015/02/how-to-update-firefox-os-13-to-20-with.html
I'm having this problem after updating to firefox OS 2.0

DroidX dropping Bluetooth connections with 2010 Honda Accord

I hope soneone has an answer for this one.
My phone drops the bluetooth connection with the HandsFreeLink in my car (2010 Honda Accord w/Nav) after a period of time (20-30mins). The phone call is still active. Only the bluetooth connection is cutoff. The car will not recognize the phone until I either shutoff and restart the car or pull the battery on the phone and reboot it. This does not happen with my wife's motorola flip type phone.
Any help would be appreciated.

Thank you all for posting your questions and concerns!
I can imagine how frustrating it gets when experiencing the Bluetooth connection problems! Just want to let everyone know our Product and Bluetooth Team are aware of the issues with connectivity since software update, and are working diligently to provide a permanent fix as soon as possible.
We will keep you updated!
Thanks for your patience, and for choosing Verizon Wireless!

WRVS4400N Drops Internet Connectivity with PORT SCAN

I just installed a WRVS440N router and it appears that every time a PORT SCAN happens, the router just shuts down and drops Internet Connectivity for about a minute or two, then once the PORT SCAN is done everything seems back to nomal?
I have heard many complaints about this router and wonder does anyone else have this issue?
I also have very erratic Internet connections speeds and I turened off the IPS feature and that seems to help. I am running version 2.0.8 Firmware.
If anybody has any tips or tricks to improve this router would like to hear. I can only say I regret buying this thing.

I suggest you to play around with the wireless settings on the router, Like changing the wireless name , channel and the type of wireless security.
This link will guide you;http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=3698
Also, you check the firmware of the router by going to the status tab on the interface.
Website you can check to download it.
http://homesupport.cisco.com/en-us/support/routers/WRT110

T420's dropping USB connections

I've gotten several reports from users within our organization of losing the usb connection on their T420 series of laptops (also a couple of reports on desktops). They have the latest USB drivers installed. It seems to be random (making it difficult to really find the issue) and many times unplugging the device and plugging it back in resolves the issue but in many cases the laptop needs to be rebooted. Has anyone seen this issue or any suggestions? Let me know if you need additional information. I don't really have any event logs to offer right now as most of the time the users aren't keeping track of when it happens and notify us well after the fact.

Hi Mfergel,
Thank you for the reply!
There is one more option to speed up the data transfer rate, but you have make sure that you are using USB safety remove option for that.
In Device Manager, right-click the USB drive in Disk drives folder, then select Properties, switch to Policies tab, and choose Better performance. Click OK to keep it.
NOTE: If you use this method, make SURE you use the sub removal tool that pops up in your system tray when you first plugged in the device (system tray is the little area near your clock on the task bar)
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Dropping wireless connection with Apple Wireless Keyboard

I've got a new bluetooth chip in my iMac from support at my location, a new wireless keyboard and I'm still having issues. Wireless connection dropped 6 times typing this one sentence. Aaargh. I've been busy with this ever since I bought the computer. On irregular intervals (absolutely no regularity whatsoever) the computer loses connection with my Apple Wireless Keyboard. So if I have a new iMac, with a new bluetooth chip and a new keyboard how come this issue is still an issue? It's driving me mad. And possibly the guys at the centre as well.

Hi mvoltage
Do you have any appliances with motors or other mobil telephone devices setup near the iMac?
Both motor flux fields and Cordless Phone Base Stations can and will interfere with the operation of the iMac's wifi and airport signals.
Dennis

VCS drop a connection with same endpoint Polycom HDX after 2 hours

Hi ,
i ' ve a problem , with a VCS Control and some Endpoint Polycom HDX.
I use a TMS and 2 mediablade MCU registered on VCS.
I connect various endpoint with ip address (in the VCS there is a Membership rules for the internal private ip address) , but same endpoint after 2 hours drop a connection.
I examine the problem with a sniffer:
10.253.40.4 is the Endpoint
10.49.64.190 is the VCS Control
from the vcs i can see: (10.49.72.20 is the mediablade - codian MCU)
I DON'T KNOW what can drop the connection.
in my network i've another gatekeeper.
If i register the same endpoints at the other gatekeeper and i call this with the e164 number the connection works very well and there isn't any fault.
Only whit a VCS there is a problem.
The VCS and the other Gatekeeper are uder a pix cisco firewall, bau there a rules that permit all ip from the network.
The specialist have verify the firewall and there aren't any drop.
what can i do ?
i try to modify the timer on the H323 vcs parameters, so:
can you help me , please ?
Thanks in advance
Francesco Costalunga

but when i modify the timer (call time to live or time to live) i can reset the vcs o re-register the mcu ?
Thanks in advance
FC

USB connection with Nokia N70

While my imac can see the N70 via the USB connection, isync doesn't see the phone. I want to transfer photos/video from the phone to the imac and imagine the usb to be way faster than bluetooth. Can anyone hopefully point out an obvious solution to the dilemma??

I'm not familiar with the N70 but I have a N3230.
I simply remove the MMC card from the phone and plug it into my USB card reader. It then mounts itself as a drive on the desktop and I can manipulate its content.

Problem while using Internet USB Connection with Macbook Pro

Hi...
My name is udayan and i am from India, I am using MACBOOK PRO from last 1 year. For most of this period i have used wi-fi connection for my laptop. But recently i have purchased a Relience Net connect Device for Internet facility. As soon as i started using this device, i have started facing an unusual problem. Whenever i start using it, after 5-10 mins. a fade screen appears and asks me to RESTART the laptop. This keeps on happening after every 10-15 mins which is pretty annoying. I have tried to use the same Internet device on normal laptops and it works just fine with that machine.
Can you please help me to understand this phenomena? Is it a MAC limitation or something else?
Hope to hear it from you soon.....
Cheers!!!

I tried to connect with Ethernet the MACBOOK Pro to the modem but the situation hasn't changed
Are you saying you cannot connect to the internet wirelessly and through the ethernet? If so, there is something else going on.
See KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
============================
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
=============
Mac OS X (10.4.6)
Use Software Update to update your OS to last version of Tiger which is OS 10.4.11. Install all the other updates that goes along w/it.

Nokia 6600 fold - no USB connection with PC Suite

Hi,
I've got a new 6600 fold phone. I've insatlled Nokia PC Suite 7.1 and connected the phone with the USB cable. The PC recognized it and installed it just fine. And yet, the PC suite doesn't "see" the phone - I can't choose any of the options to connect on the menu.
Tried to reinstall, read every possible guide, restarted both PC and cell phone several times. Nothing works.
Any ideas what else I can do?
(I don't have a bluetooth connection on the PC)
Thanks.

Hi,
I was having the same problem with my 6600 slide, when trying to use the software updater. I noticed that the phone was connected on port COM11, i simply changed this to the lowest COM port available (in my case COM1) and the software updater picked it up.
To change COM port right click
My Computer and select Properties
Select Device Manager
Expand Ports (COM & LPT)
Right click your Nokia phone USB and select Properties
Select Port Settings
Click Advanced button
Choose a new COM port from the drop down list
Click OK when done

USB connection with PC.

Normally I connect my 9720 with my PC with a USB cable to back up phone and to copy pictures and videos. When I plug the USB cable in I got a menu on my phone with three options. Suddenly this stopped happening. Also there is no response from my PC when I plug the phone in. It does not even show up in device manager. I tried the phone on 4 different PC's on of which is a win Xp machine. I also tried different cables. Nothing . The phone, however charges normally when connected to the PC. I down loaded a program, calfix.exe, and installed it on the XP machine, the menu's popped up on my phone and briefly I worked like normal and then it stopped again. It does not work on win 7. I gave my phone a security wipe and had no success. Any help or is this my second 9720 to pack up. (this was a replacement since the first one kept on restarting itself)
Solved!
Go to Solution.

Jjsmith, take a look at BlackBerry® Desktop Software section board. There are guidance to resolve your issue. I recommend Tips for getting BlackBerry Desktop Manager to det...
Sorry ereeamazing, I don't think battery pull will help.
• Click Likes to appreciate those who helps you
• If your issue solved, mark the best post in your thread as Solution

Hp 6535b drops usb connection with kvm.

Similar Messages

Maybe you are looking for