HP 6730b can I swap screens with different resolutions?

Hi,
Is it possible to swap screens with different resolutions on a HP 6730b?
Mine is 1680x1050 pixels and I want to find a 1280x800 screen to replace it.
(letters are far too small for an old fart like me. ;-)
The resolution list does support 1280x800 but it looks like viewing the screen through dirty glasses.
Just wondering if the interface is the same.
Cheers,
Bas

Usually people want to go in the other direction. Here is the Service Manual:
Manual link
The parts list shows a panel that is SXGA+ (1400 x 1050) and a WXGA (1280 x 768 or 800) panel.
There are multiple motherboards, but the only difference appaears to be whether there is a slot for a cellular card or not. In other words if you install the WXGA panel the motherboard should work with it and you will get 1280 x 800 resolution looking good. Laptop displays and other digital panels only work at their maximum aka native resolution and you get that muddy look if you try to run them at a lower res. You want to buy the whole panel with the cable designed for the WXGA....sometimes the cables will not work with a different resolution screen. Post back if you need further help finding a screen. You may find it cheaper and easier to sell or trade your laptop for one with the lower resolution screen.

Similar Messages

Bridge_How Fit-to-Screen with different resolution pictures in Fullscreen/Slideshow

Hallo,
I´m looking for a solution for my following problem:
I have several photographs in totally different resolutions. Some are pretty small, some are huge.
I want to show them with Bridge in FullScreen-Preview or maybe as a slideshow.
How can i bring them all to fit the whole screen, even if the resolution is to small to fit regularly.
In other words, is there an option for dynamic zooming to bring every frame to FIT the Screen, regardless which resolution it got?
I discovered "scale to fit" in the slideshow options, but it doesnt work for me.
An zooming every file in the right position and size is not an option.
Im sure Bridge is able to do it, beacause even IrfanView and ApplePreview are able. But where to find this option?
Can anybody help?
Thank you a lot
best regards
madlo

As far as I know, Bridge will not enlarge small images. If you hit '+' on fullscreen preview, it zooms in, but keeps the same zoom for every image.

Displaying remote panel on different screens with different screen resolution

Hi
I am running a vi on the PXI . But when i try to open the remote panel it gets shifted on different screens
with different screen resolution. I have tried to set the windows run time position using the vi properies
but to no avail. Can anyone help me on this issue??????
Regards
Amit Ahuja

What is your lv version?

How can i share documents with different users on the same mac?

How can i share documents with different users on the same mac?

Shared how? The other users can read the documents or you all can read and write the documents?
The first is easy just place the documents in /Users/Shared anyone can access the files there and the other users will be able to read them.
The second is a bit trickier.

I can't open swf files for schoolwork. Installed VCL, Flip4Mac and Adobe flash and shockwave players. Can get white screen with connection erro message with adobe flash player. Help me!

i can't open swf files for schoolwork. Installed VCL, Flip4Mac and Adobe flash and shockwave players. Can get white screen with connection erro message with adobe flash player. Help me!

Apple dropped playback support for .swf formats in QuickTime almost ten years ago.
Adobe Flash Player is the only way to view them.

Can't share screens with Skype Windows 8

I can't share screens with Skype (Windows . I searched everywhere but I couldn't find a solution for it.I tried: clicking on the + button during a conversation as well as right clicking on the contact and seeking for the screen sharing button. See both screenshots in attachment.May someone please enlighten me to find the screen share function on Skype version windows 8?

Not being able to view others share screenMy os is 8.1, I have installed the skype for desktop. I have also set, Video Settings==>Automatically receive video and share screens with anyone Yet when my friend click on share screen, I cant view his screen, whilst if I click on share screen he could. My skype version=6.11.0.102. I have also click on updates and all is latest. I also set for automatic update Able to block video calls but enable share screen
Pls advise how can I block all video calls yet able to allow anyone to share screen with me?

Layout with different resolutions

Hallo and good morning!
Once again I need some advice:
I have a program that is running on different machines with different resolutions.
Is it possible to avoid, that the layout is paning all around?
Best regards
Hilby
Solved!
Go to Solution.

Hi Hilby,
No... that is currently a limitation of the layouts, where we try to adapt to each screen, but the objects and the layout may not fit into a different aspect ratio with a different number of pixels.
The aspect ratio is the most important, followed by the total resolution of the screen.
Some more information on aspect ratios is below.
In summary, DASYLab is unable to completely adapt the "Screen" layout for evey monitor size and resolution. If you want to have a fixed layout that does not completely occupy some monitors, then consider using a fixed size, like A4 or A3.
If you make something on a big monitor, 1600x1200 for example, and move it to a wide screen monitor,, 1600x900.
From my friends at Wikipedia
With computer displays, aspect ratios wider than 4:3 are also called widescreen. Widescreen computer displays were previously typically of 16:10 aspect ratio, now they are shifting to 16:9.
Until about 2003, most computer monitors had a 4:3 aspect ratio and some had 5:4. Between 2003 and 2006, monitors with 16:9 and mostly 16:10 (8:5) aspect ratios became commonly available
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

Connect 2 externa monitors with different resolutions?

Is it possible to oonnect 2 external monitors, with different resolutions to a mbp pro?
I've read some about the "matrox solution", but that one requires that the monitors uses the same resolution.
And, just to be clear, I don't want to just duplicate the screens, one should be primary.

You may want to phone OWC and ask whether what you want to do is possible if one monitor is connected to the mini-Displayport and the other is connected to a USB port using this adapter:
http://eshop.macsales.com/item/Other%20World%20Computing/VIDU2DVIA/
Note that the OWC adapter, like most USB video adapters I've seen advertised, is limited to a maximum resolution of 1600 x 1200, so you won't want to use it with a monitor whose native resolution is higher than that.
Message was edited by: eww

Can a single HID report descriptor support multiple touch screens with different sizes?

Hi Experts:
I have a question for specifying touch monitor sizes in the HID report descriptor:
Can ONE HID report descriptor support multiple touch monitors with different sizes ?
Thanks in advance
leo

My screen shot is from AA9, and I have seen that the UI for AAX is vastly different, but...
Choose Paper Source from Page Size should be the "one-touch" solution your looking for.
In my test, my Konica-Minolta Bizhub failed to detect the proper paper trays, but Acrobat correctly spooled the pages.

Auto-Detect Screen Resolution Does Not Work Across Multiple Monitors With Different Resolutions

Hi,
The Acrobat Pro DC (15.007.20033.2203) auto-detect screen resolution feature does not work with multiple monitors at different resolutions. Acrobat looks fine on my hidpi primary laptop display (Razr 14" 2014) but is completely unusable if I drag or extend the application to a standard HD resolution secondary monitor. Dragging Acrobat from my primary desktop display to the secondary display causes the UI elements to become 2x as large as they should be and makes Acrobat unusable.
Is there a way to make Acrobat auto-detect the display that it is currently on?
Thanks!
-Donald

To prevent it from happing again, you can
1. go to the Mouse preference and turn off the scroll zoom feature.
2. go to the Universal Access preference and disable the zoom features.

For FF19 with PDFs, can the yellow "Open With Different Viewer" pop-up bar be disabled?

Hi all, I really like the built in PDF viewer because search as a I type works with, thanks FF devs!
But ... I get this yellow pop-up with many PDFs I view:
This PDF document might not be displayed correctly and a button for Open With Different Viewer
The thing is these PDFs seem fine and I have to close the warning every time.
Is there anyway this pop-up can be disabled or I can set an about:config setting to skip it? I can manually save a PDF or disable FF19's viewer if there's a noticeable problem with the FF19 viewer.

Ok, since the pop up bar can't be disabled I'll disable the built in PDF viewer. Too bad, I like the search as you type feature with PDFs but this un-disable-able pop-up bar is not user friendly.

Macbook Pro running Snow leaopard can not share screen with Mac Pro running lion with "Back to my Mac"

Anyone else? When I use back to my mac, I can get access to the files on my desktop, BUT, I can't screen share. Screen share is sleected in settings and everything I know to check is set up right. Back to my Mac ir running on both machines using the same sign in.
Any ideas?
Jon

Once you get yourself back to Snow Leopard, if you still want to upgrade somewhat, I would suggest the following:
1. Get an external hard drive that you can use for experiments with new OS versions. You could partition it into 2 or 3 partitions. You could then clone your existing Snow Leopard system to one partition using Carbon Copy Cloner (well worth $40) or SuperDuper ($25).
2. Buy OS X Mountain Lion for $20, through the Apple online store (I don't think it's available through the App Store). Apple has decided to make it very difficult for anyone to get Mavericks unless they have already downloaded it.
You will receive two e-mails from Apple, one containing a PDF with a redemption code, and one with the password you will need to unlock the PDF. Using the code, you will download Mountain Lion from the App Store, where it will appear among your Purchased items.
After ML finishes downloading, its installer app will launch itself. When you see this launch screen, QUIT the install app immediately! Go to your applications folder, find the Install OS X Mountain Lion app, and copy it to a safe location outside of your Applications folder. Keeping one or more copies will allow you to reinstall without unnecessary aggravation if you later need or want to do that. At this point, you can re-launch the Installer in the Applications folder and let it run. You can install it on a clean partition on your external HD, or you can allow it to upgrade the Snow Leopard clone you created on your external drive, or you can do both. This should allow you to test how everything works for as long as you like.
3. If you left yourself a free partition on your test drive, try a clean install of Yosemite and set everything up from scratch (do not migrate anything). This will allow you to see whether your problems with it were related to something in your Snow Leopard system.

Jars can't be signed with different certificates---even by Sun?

I am deploying an application which uses the following jar files:
com.example.application.jar
com.example.support.jar
javax.activation.jar
javax.mail.jar
The latter two are jars signed from Sun, yet JWS complains that the jars have been signed with different certificates. I'm forced to unpack the Sun jars and repackage them,signing them with my own certificate.
Isn't this a little restrictive? Shouldn't jars signed by Sun be exceptions to the "all jars signed by the same certificate" requirement?
Garret

Thanks! The JNLP 1.5 MR specification is a bit opaque about exactly how to do this, but the following site has an example that helped:
http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/faq.html
The example didn't mention whether I can request all permissions for the component extension, but I suppose I can. Nothing seems to indicate whether I can have component extensions reference other component extensions (JavaMail requires JAF, for example), but it seems to work.
By requesting full permissions for the component extensions, though, I now get two dialogs presented to the user, the first asking if my application should be trusted, and the second asking if Sun Microsystems should be trusted.
If I remove all-permissions from the JavaMail component extension, yet request it for the main application (thereby only presenting the user with one confirmation dialog), will I still be able to perform restricted functionality using JavaMail, such as connecting to remote servers?
Here's what I'm now using, in hopes that it benefits someone else. The main JNLP:
     <resources>
          <jar href="com.example.jar"/>
          <extension name="JavaMail" href="javax.mail.jnlp"/>
     </resources>
...javax.mail.jnlp:
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="http://localhost:8080/" href="javax.mail.jnlp">
     <information>
          <title>JavaMail</title>
          <vendor>Sun Microsystems, Inc.</vendor>
          <description>JavaMail API.</description>
          <homepage href="http://java.sun.com/products/javamail/"/>
     </information>
     <security>
          <all-permissions/>
     </security>
     <resources>
          <jar href="javax.mail.jar"/>
          <extension name="JAF" href="javax.activation.jnlp"/>
     </resources>
     <component-desc/>
</jnlp>javax.activation.jnlp:
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="http://localhost:8080/" href="javax.activation.jnlp">
     <information>
          <title>JAF</title>
          <vendor>Sun Microsystems, Inc.</vendor>
          <description>JavaBeans Activation Framework extension.</description>
          <homepage href="http://java.sun.com/products/javabeans/glasgow/jaf.html"/>
     </information>
     <security>
          <all-permissions/>
     </security>
     <resources>
          <jar href="lib/javax.activation.jar"/>
     </resources>
     <component-desc/>
</jnlp>Garret

Whatdoes it mean when the project I open has a red screen with different languages,media off line?

I finished my movied. and then tried to move everything into a new file labeled TAJE files. Now when I try to open the last version of the movie, I get nothing but 2 of the title clips and then every clip is a red one with different languages saying something about media off line? I deleted old copies but thought that was ok?
Pam

Yes, if you have a completed DVD and just want to copy it then use disk burning software, not PRE. I use Nero and ImgBurn as my main burning applications - Nero is commercial, ImgBurn is free.
If you want to make extra copies over time you would be better to copy the VIDEO_TS folder from your DVD to your Hard Disk and then point ImgBurn at the folder.
For new projects requiring multiple DVDs to be burnt you would be better during Share to burn it to disk. Again, once it's there you can just point ImgBurn at it.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Error: java.util.map can not be inherited with different arguments

Hi,
I am getting following error while building the source code.
C:\venus\src\com\martquest\messaging\msgio\MqMessageIOObjectCarrier.java:36: java.util.Map cannot be inherited with different arguments: <> and <java.lang.Object,java.lang.Object>
[javac] public class MqMessageIOObjectCarrier extends Properties implements IMqMessageIOObjectCarrier
What should I do to resolve this issue?
Thanks
Prachi

Hi,
I am getting following error while building the
source code.whose source code? If it's yours, you'd better look at where you are defining and using Map. The error code tells you exactly what's wrong.

HP 6730b can I swap screens with different resolutions?

Similar Messages

Maybe you are looking for