HP 6735s and Windows 7(Driver Support)

Need driver for HP 3D DriveGuard(HP Mobile Data Protection also called).HP recommended Windows 7 but no oficial drivers for my laptop.I try lastest driver from HP web site but i Control Panel i can see this "HDD not supported''.Work great with XP and Vista!

Hi,
I redirect people to ftp because this link will never change and file will always be avaible. If You are redirecting to http site this links are always changing and working only for some time. Thats first answer on Your comment.
Second thing. I never saw Your comment or help on any BSOD problem and even never found Your help with 3D DriverGuard BSOD report that You are talking about.
Third. If we will never tried drivers from other models then other users will never downgrade to XP or have a sound on other models even Win7.
If You are having so big knowledge start doing something because everone can write Your comments which gives NOTHING. Many people are installing this file on this forum and notebook review and haven't got any problems.....
<text deleted> 
Message Edited by Daniel_Potyrala on 10-18-2009 07:14 PM
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Similar Messages

  • MSI Big Bang X79-XPower II Windows 10 Driver Support Request!

    We are in need of MSI Big Bang X79-XPower II Windows 10 driver support. Do not attempt to install Windows 8.1 drivers from the MSI global website on your Windows 10 setup or it will screw up your entire operation system and you will have to reformat yo...

    The OCZ shows up on the main BIOS screen at 1066Mhz
    Unplugged the power 
    shorted the JBAT pin for 5 minutes
    Put the G.SKILL memory into slot 2
    re-plugged the power
    powered on
    MB lights up, fans spin, 
    NO POST
    wait ~2 minutes
    MB shuts down and then rest...

  • Windows 7 driver support for T60(p)

    Hello all
    Im a happy owner of a Thinkpad T60P, 2007-8LG model. However, im getting much tired of Windows XP and want to use the upcoming Windows 7 OS, but im a bit unsure if there will be any driver updates for the T60 models.
    I've seen the Windows 7 beta drivers page from Lenovo, but this only includes drivers from T61 and up. Can anyone confirm that there will be drivers released for T60(p) models as well (or in case the product line is ditched).
    Thanks in advance
    Solved!
    Go to Solution.

    Nocture,
    I have a T60p (8744-J2U) with Windows 7 (Build 7229) runing very very happily. I have 4 GB installed. All the key drivers you need have been released and should work fine on your system.
    If you want a super clean install, refer to my post on  Device Driver Installation Order thread.
    Also, if you want a really stable laptop, DO NOT UPGRADE. Backup your system and data, VERIFY IT and then delete the partitions during install and let Windows 7 partition and format the drive.
    Pierre

  • TCS gen 2 and Windows server 2003 support

    Hi,
    I have a Cisco TelePresence Content Server v5.3 running on gen 2 hardware.
    From what I can see TCS v5.3 only works in Windows server 2003, this is a concern as Windows server 2003 support is ending July 14, 2015.
    Is there anything that can be done to mitigate the above problem without having to purchase the gen 3 hardware?
    Kind Regards
    Ed

    The supported deployment methods right now for the virtual TCS is for it to be installed on existing TCS hardware, either 2nd or 3rd Gen server only, 1st Gen servers aren't supported, but you can migrate from a 1st Gen to either of the latter two. You'll basically be wiping the old hardware servers and installing VMWare on them to run a single instance of Windows and the virtual TCS application. As Wayne said, support for 3rd party platforms is coming, Cisco knows it's a big deal for customers and a solution needs to be provided and not just limited to existing TCS hardware.
    You would migrate your existing license and option keys to the new servers by looking them up from the registry and creating a license file to be used during the install process.
    Support contracts will migrate as well, the serial numbers will remain the same, but the product IDs might change to reflect you now having a virtual TCS instead of hardware. However, I'm still working out the details of the product IDs from my migration I did back in August, though that hasn't stopped me from getting TAC support. 
    To give you an idea of the process, take a look at the TCS 6.1 VM Install Guide. 

  • MOVED: Windows 7 driver support for the Mega 865 Pro

    This topic has been moved to Windows 7.
    https://forum-en.msi.com/index.php?topic=128122.0

    Nocture,
    I have a T60p (8744-J2U) with Windows 7 (Build 7229) runing very very happily. I have 4 GB installed. All the key drivers you need have been released and should work fine on your system.
    If you want a super clean install, refer to my post on  Device Driver Installation Order thread.
    Also, if you want a really stable laptop, DO NOT UPGRADE. Backup your system and data, VERIFY IT and then delete the partitions during install and let Windows 7 partition and format the drive.
    Pierre

  • Lexmark x5495 and windows 7 - driver problem

      Hi, I have windows 7 and just got a printer - lexmark x5495
     unfortunately Windows cant find the right driver 4 the printer via windows update...
     I have downloaded  driver for win 7 32, 64 bit, windows vista even windows xp and non of them is good!!! :(
     I was looking all over google for somebody to solve that problem and nothing!
     on the lexmark and windows websites it says printer is compatible but must be something wrong with driver
     btw it works 100% under win xp and it is not any printer spool  problem...
     can somebody help me, please

      Hi, I have windows 7 and just got a printer - lexmark x5495
     unfortunately Windows cant find the right driver 4 the printer via windows update...
     I have downloaded  driver for win 7 32, 64 bit, windows vista even windows xp and non of them is good!!! :(
     I was looking all over google for somebody to solve that problem and nothing!
     on the lexmark and windows websites it says printer is compatible but must be something wrong with driver
     btw it works 100% under win xp and it is not any printer spool  problem...
     can somebody help me, please
    Could you be more specific when you mention none of the drivers is good? Is there any exclamation mark in device manager for the printer? And what makes you think the problem lies with the drivers and not the printer itself or the way you setup the drivers?
    Suggest you to uninstall the printer drivers from device manager, next reboot your pc and ensure the printer is power on and plug in, next let windows 7 detect and assign drivers by itself instead of using the drivers downloaded.
    If still no go after the above, run the drivers in xp or vista compatble mode under windows 7

  • Maverick and wacom tablet driver support

    After Installing OS 10.9 Maverick and downloading wacom intros driver support for OS 10.9, Sys Prefs is showing the Tablet is unsupported. Wacom site says driver is for 10.9 . Any clues?

    Hi..
    You aren't alone >  Adobe Community: Wacom driver issue in PS CC on OSX 10.9 Mavericks
    Wacom needs to write a Mavericks compatible driver.

  • HP LaserjetPro M277dw printer and windows vista driver installation issues

    I ust got the hot off the press HP Color LaserJet Pro MFP M277 which seems to be a miraculous machine.  Just one problem.  When trying to download and install the printer driver it goes through the whole process and then tells you the driver will not work with this operating system.  
    Hmmm.  It says on the HP website that this is the correct software for this machine.  I have been through at least 10 HP support people up to Level 3 support and hours of online work with HP people trying to install the software.  The word I get back is that it will not work with my machine.  So I am wondering if I have a Windows Vista 64 bit machine, and the software says it is for that machine, but it wont load, what machine will it work with?  The last person I worked with just told me I will need to get a new computer.  I thought I just bought a printer that would work with my computer, and now I am told i have to buy a new one?  
    Any ideas on how to get the software to load?  I have some functionality, such as wireless network printing that one technician was able to get to work, but no scanning.  Another technician changed all the permissions for installing various programming segments to "everyone" but that didnt work either.  He had it so messed up that the it would not print anymore wirelessly either.  I had to restore to an earlier date after that guy got off my computer so i could at least get some functionality back.  
    So, without the driver, I cannot scan to this computer, and i really dont know what other good things i am missing out on because I have never experienced the correct configuration......please help if you can.  I need to send the machine back within a certain time period, and I really do think it is the solution for my business, if I could get it to work......Thanks!
    PS Direct connection to computer and downloading software that way does't work either.....cannot use the printer directly connected.....

    Hi,
    Is it the following one ? If not, please download then try again:
        http://ftp.hp.com/pub/softlib/software13/COL60646/kj-145845-1/HP_LaserJet_M277_PCL6_Legacy_Print_Dri...
    By the way, what is the model of your Lasejet M277 printer ? Must be M277 something.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Windows 7 Driver Support

    Hi guys a have a lil problem so i need support, i have this card? Ensoniq ES5880 (Creative SoundBlaster Audio PCI28) and i cant find right driver for it!
    Im using Windows 7 Ultimate and i found some old driver WDM i dont know what that means anyway i realy need help from u experts, i hope u guys can find any driver that my sound card can use for Windows 7.
    I would not post here but i realy need help because with that driver WDM sound works fine but i cant fix EAX in game, it just wont work on XP i used another driver and EAX worked but that driver doesnt work on Windows 7 so i need help.
    Thanks in advance and sorry for my english im from Croatia, Cheers

    Sorry, this product is disconected & its works only for [u][b]http://support.creative.com/downloads/download.aspx?nDownloadId=843

  • Windows 7 and Windows 8 Driver Availability Chart for Creative's products

    Hello Everyone,
    There is a Knowledge base article that contains the Windows 7 and 8 Driver Availability Chart for Creative's products.
    Thank you.
    Mod Notes: Updated the link and include Windows 8.

    For Windows 7
    To run the Hardware and Devices troubleshooter in Windows 7, follow these steps:
    Open the Hardware and Devices troubleshooter by clicking the Start button , and then clicking Control Panel.
    In the search box, enter troubleshooter, and then click Troubleshooting.
    Under Hardware and Sound, click Configure a device.

  • Dell Audigy 2 and Windows SP3 driver and static problems

    SB0243
    Ok, Creative you and Dell have left us customer behind and giving us the shaft.
    I know you tell us to go to Dell to get drivers, and Dell still has the same driver posted they had when i bought my PC in 2003.
    Funny thing is that the only driver i find that work without the static problem is the one from the creative CD from 2003. The only catch is that none of the other sound Apps will install or work with windows SP3. So you end up with a card that has sound without static but only in two speaker mode, no mixer, EAX, CSMM, sound bank, etc... you know all the other stuff.
    I have installed Danial K driver at one time and they worked good for months then the static came back one day. Now after a fresh install of windows with SP3 i end up here with only the old driver working with just two speakers.
    This is very sad that a big company like creative can not create a driver that works with current software. You need to fire all your programmer and go hire two with all the money you paid everyone else and maybe then these two top programmer might be able to make something that works. This has become a joke in the sound industry.
    It was said that this ship is sinking, i think it has sunk at this point, us rats are jumping ship to some other card that works. Most likey it is not going to be from creative.
    Rainey

    ?Hey, I cant get CMSS to work here, im on windows 7 32bit, wich CMSS version are you using? I cannot open THX Console or EAX Console.

  • ADConnector v9.1.1 and Windows 2008 R2 - Supported? (OIM 9.1.0.2)

    Below is my question around the OIM AD connector version 9.1.1 and its support with Windows Server 2008 R2.
    From the AD Connector Documentation I can see that Active Directory 2008 is a supported target system by the OIM connector v9.1.1. There is no mention of Windows 2008 R2 at all in this document: http://download.oracle.com/docs/cd/E11223_01/doc.910/e11197.pdf
    My question is: Is Active Directory on Windows Server 2008 R2 supported as a target system by v9.1.1 of the AD User Management Connector. If not what version of the AD User Management connector do we need to upgrade to (9.1.1.4 or 9.1.1.5)?
    I am crossing my fingers for the answer to be that v9.1.1 does support Windows Server 2008 R2 to save us the pain of an upgrade.
    Thanks..

    It depends on if you mean "officially supported" or "will work".
    On the officially supported line AD 2008 R2 is sometimes considered different enough to need a separate certification. Check your connector release notes and if that doesn't include AD 2008 R2 open a support case with Oracle to get the official ceritification schedule.
    With 99% likelyhood it will work fine but you may end up in a non supported state which may or may not be acceptable in your organization.
    Best regards
    /martin

  • SB Live! 5.1 Dell and Windows Vista Driv

    Since the Sound Blaster Li've! 5. (digital) card included with Dell computers a few years ago are no longer supported by Creative, and since I now have Windows Vista 32-bit Ultimate edition, is there any way to get Creative drivers for it, or will I simply have to purchase the Creative Sound Blaster X-Fi Elite Pro card that I planned to buy for a new custom-built high-performance computer?Simply put: Are there any Creative-made drivers for Vista for the SB Li've! 5. cards?

    Try using the kX drivers. Admittingly, I also use kX on my XP MCE2005 box because the Creative drivers hang during install on MCE2005. I've also tested it under Vista 32 and it appears to work (didn't stick to Vista 32 because it was problematic and lacked certain features i.e. What-U-Hear for me). Good luck!

  • ACS 5.5 and Windows 2012 AD support

    Hi All,
    previously I had two AD domains based on 2008 and had machines in one domain and users in another domain
    and the condition statement "Was machine authenticated=True" worked fine when doing EAP-TLS machine then user
    authentication.
    I have now upgraded the machine's domain to 2012 and  machine authentication works fine and user authentication
    also works, but when you put the two together, and enable "Was machine authenticated=True" the ACS errors
    out when doing user authentication with the message "ACS unable to find previous successful machine authentication"
    even though machine authentication was successful. I have tried with with ACS being a member of both 2008 and 2012 domains at each stage.
    The clients are all windows 8.1
    Has anyone encountered this scenario before ?
    TIA

    I would like to share a good troubleshooting guide for ACS 5.X and later, Please have a look:
    http://www.cisco.com/c/en/us/support/docs/security/secure-access-control-system/113485-acs5x-tshoot.html

  • Windows 7 and Windows 2008 drive mappings won't work

    Hi, I'm trying to map a network drive using the group policy preferences. I can map drive no problem when i'm using static paths such as '\\servername\sharedfolder'. However i am unable to map drives to Windows 7 or Windows 2008R2 boxes when i use variables,
    such as \\Servername\c$\users\%username% This works fine on XP clients, after some googling i discovered hitting F3 would give me a list of usable variables so i tried %logonUser% or \\servername\c$\users\%logonuser% this also fails to map the drive on Windows
    7 or 2008R2. The preferences are set to show all drives and i have ticked the box to run under the users security context. If i look in the event log I am getting the following error
    Event id - 4098
    Source: - Group Policy Drive Maps
    The user 'Y:' preference item in the 'test {21D9AF2B-8139-44EC-B8AA-E20802A51293}' Group Policy object did not apply because it failed with error code '0x80070037 The specified network resource or device is no longer available.' This error was suppressed.
    This happens if i try to use any enviromental variables to map drives to 2008R2 servers or Windows7 Clients. Does anyone know how to solve this surely i must be able to map drives to Windows 7 machines via group policy using variables it would seem like madness
    if its not possible.

    This is a link where you can find a list of Windows Environment Variable:
    http://www.technipages.com/list-of-windows-environment-variables.html
    It should help you.
    I have another link for another person who faced the same problem with the %logonuser% variable, so have a look at it:
    http://www.gpanswers.com/community/13-group-policy-preferences/2490-drive-map-extension-trouble-system-variables.html
    Best regards.

Maybe you are looking for