HP 7210 All-In-One Ethernet Port not working

The green Ethernet port light is not lighting and the computer can no longer find the printer. I believe it may have been damaged by a power surge during a lightning storm. I have checked the Ethernet cable that connects it and it is working fine with my laptop so it is not the cable coming into the printer. The printer works fine with the USB cable and all other printing, faxing and copying functions are working fine. Is it possible to repair or replace the Ethernet port?
I have also tried setting the IP address back to default and manually setting the IP address. The port is just not recognizing the cable.

Jim B - First, thank you so much for helping me.
I was able to get the green port light to light-up by performing the steps 1 - 5 you recommended. Also the amber data light is on but not blinking. In fact now they both stay lit even when the cable is removed. When I use the same cable with my laptop the green light comes on and the amber light blinks.
Unforntunately, the printer is still not finding the IP address. I tried the function to "Restore the Network Defaults" and I also tried to manually set the IP Address. When I print the network settings it indicates the status is "Offline" and I have the following changes:
                                                                Was                                                                       ISActive Connection Type:               Wired                                                                    None
ULR: http://                                    192.168.1.102                                                     0.0.0.0
Hostname:                                       HP1B376F                                                           HP1B376F
IP Address:                                       92.168.1.102                                                      0.0.0.0
Subnet Mask:                                   255.255.255.0                                                    0.0.0.0
Default Gateway:                            192.168.1.1                                                         0.0.0.0
Configuration Source:                      DHCP                                                                  Not Specified
DNS Server:                                      68.230.242.25                                                     0.0.0.0
Link Configuration:                          100TX – Full                                                        None
mDNS:                                              Officejet 7200 series (47E2A6)                        Not Specified
Any ideas what I should try next?
Thanks
Connie

Similar Messages

Error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working'

error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working' My broadband is BT Infinity with a very strong signal throughout the house and my operating system is Windows XP. My printer will not connect wirelessly to my network, what can I do with respect to the error message 'Wireless Radio not Working'

Hello @GeoffH777 ,
Perfect! You are very welcome, I am very happy to hear the reset helped!
If you have a quick moment, please scroll back to my last message here and click the "Accepted Solution" button, so others can find our thread if they happen to run into the same issue.
Greatly appreciated, have a wonderful day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Mountain Lion Mac Mini Server Ethernet Port Not Working

I have a Mac Mini Server and once I upgraded to Mountain Lion Server the Ethernet port is unresponsive. It worked before upgrading. Is there something with Mountain Lion Server that is causing the Ethernet port not to work properly?

Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

LaserJet Pro MFP M125nw - Scan to app All-in-One Remote does not work

Hi gurus,
Basically I have pruchased that super-printer and I am now trying to achieve scan to my mobile devices.
I have one iPad 2 on iOS 7, on 2 Android devices (smaller tablet and phone) both running Kitkat 4.4.2
I am trying to submit a scan from all these devices and retrieve the output within my mobile devices, actually this is fairly described here and concerns accurately my printer model : http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02486319&tmp_task=useCategory&cc=us&destPage=pr...
Unfortunately, What happens :
- From my iPad, the AiO app states that my printer is not compatible with the application !!
- From my 2 Android devices, the All-in-One Remote app will work fine, except the scan feature as nothing happens (well, when tapping either 'Preview' or 'Scan' button in the Scan section, I see a 'Cancel' button during 0,1 second and I am back to that scan section)
Any one could help please ???
This question was solved.
View Solution.

Hello,
Can no one help ?
Is the product description misleading ? Is the AiO app not really reasy to support this printer ?

HT1338 since updating to Mountain Lion my HP 8180 all in one printer will not work and shows it as idle and pipe broken it connects via WIFI

since updating to Mountain Lion my HP 8180 all in one printer refuses to work it show as "pipe broken" and printer as idle can anyone help please

do you mean the printer? ive already tried that without success any further help apprecaited

USB Ethernet port not working after ML install

After installing ML I cannot get the USB Ethernet port to work. Have searched for andriod file transfer agent but cannot locate it as previously mentioned.

Same Problem over here. Has anyone a good idea how to fix this problem?
After installing ML i cannot get my original Apple USB Ethernet port to work (Macbook Air 2011).

Built-in ethernet port not working in unibody Mac Mini

Hi,
So ever since I acquired this new mac mini I haven't been able to get it to recognize any devices connected via ethernet. I obviously checked the cables and all is good there. I tried connecting it to another mac, and while the other machine was detecting a device (the mac mini) at the other end of the cable, the mac mini kept saying that the cable is unplugged or the device off.
After several days of having the issue I decided to remove the ethernet service from the network preference pane to set it up again but to my surprise, the built-in ethernet option was not available (I only got airport, firewire, bluetooth DUN, VPN, PPPoE and 6 to 4). At this point I tried removing the networkinterfaces.plist file form the system configuration folder in the system preferences folder to no avail. I then tried to zap the PRAM, NVRAM, reset the SMU, SMC and all that kind of things to get the port recognized by the system but no luck.
When I look at the system profile I get these weird results in Ethernet Cards:
pci14e4,4353:
Type: Other Network Controller
Bus: PCI
Vendor ID: 0x14e4
Device ID: 0x4353
Subsystem Vendor ID: 0x106b
Subsystem ID: 0x0093
Revision ID: 0x0001
Link Width: x1
BSD name: en0
Kext name: AppleAirPortBrcm43224.kext
Location: /System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AppleAirPortBrcm 43224.kext
Version: 425.16.2
Comparing it to other macs I have It should read "ethernet" rather than that strange pci name on top and the kext name shouldn't read airport but something like AppleIntel and in location it shouldn't direct to the IO80211Family.kext package but rather to the IONetworkingFamily.kext.
So I popped in the system install DVD and fired up System profiler and at that point I didn't even get an "ethernet cards" option in the left side pane. So this is leading me to believe that the hardware is not being recognized at all, so maybe it's damaged. I did replace the HDD with a bigger one and change the RAM modules to bigger ones but I don't think I could have damaged the hardware in these processes, also I don't see how this would affect the ethernet port as it's integrated to Motherboard and didn't messed with it at all (I was very careful, to say the least!).
The last thing to do is reinstalling the system but I don't think it'll help (after seeing that the ethernet port is not even being detected by the install OS) but I need to offload all the data from my internal disk and at the moment I don't have an spare drive to do it.
So, what's the recommendation? A field trip to an Apple Store? Closest one is like 3,000 km from where I am right now, so...
Well, thanks for any pointers, suggestions and help in general.

I do not have any answers for you. Yes it appears to be reading what should be an ethernet card as an AirPort card. Have you played around with trying to install another version of Mac OS X other than the version that shipped with the Mac mini? Apple has long told us that we should not install a version of Mac OS X that was older than the shipping version. With the Mid 2010 Mac mini, the Restore DVD has the only version of Snow Leopard that will work with this Mac mini's specific hardware. At least until Apple releases 10.6.5. If you have installed other versions of Mac OS X, then erasing the HDD and installing the OS from the Restore DVD(s) that shipped with the mini may get you back to the point you need to be.
Unfortunately I think that you voided your Apple Warranty when you installed the different HDD. That was always a question in the past when folks wanted to open the former version of Mac minis and upgrade the RAM. But with the 2009 models folks started reporting here in the Apple Discussions that Apple was informing them that they had voided their warranty by opening their Mac mini. This new model made the RAM user upgradable, but the User Manual specifically states on page 43, 54 and 61 that there are no user serviceable parts in the Mid 2010 Mac mini except the memory.
Dah•veed

Ethernet Port not working 50% of the time?

On my new GD55 P67 50% of the time I start my computer the Ethernet port does not work. I know the cable is good because I have tried several cables. It seems to have problems right after I installed SP1 for windows 7. Is their a known problem with the Ethernet port on this motherboard?

By "start my computer" do you mean start from a complete shutdown, start from S1/S3 sleep or start from hibernation?
The next time you start the computer and your Ethernet port doesn't work, open up a Command Prompt window and type "ipconfig /all" (without the quotes). Copy and paste the results displayed for the Ethernet port you are having a problem with (or just copy it all if you are not sure which section belongs to the port in question).
- D

C7250 All in one Wireless radio not working

I have a C7250 All in one printer that suddenly the wireless stopped working. I ran the wireless test and it says the radio is on but the radio fails. The wireless LED is on, any suggestion on what could be the problem?

Shut off the printer. Hold the # and 6 keys while and a for a few seconds after turning it back on.
If that does not work, it is toast. You could plug it into your router with an Ethernet cable and it would have the same functionality and still work with wirelessly connected computers.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Ethernet Port Not Working After 10.6.6 Upgrade

Hello! Since upgrading to 10.6.6, I have lost my Ethernet port connectivity. AirPort is working fine.
I have done the following:
-checked ethernet cable
-used System Preferences/Network to check connection and try to create a new one
-used Diagnostic button
-zapped PRAM
-reset SMC
-repaired my disk permissions
-installed the 10.6.6 combo update
-booted in Safe Mode and then restarting
Is anyone aware of an incompatibility with 10.6.6 and the Yukon adapter?
Any suggestions greatly appreciated!
Marvell Yukon Gigabit Adapter 88E8053 Singleport Copper SA:
Name: ethernet
Type: Ethernet Controller
Bus: PCI
Vendor ID: 0x11ab
Device ID: 0x4362
Subsystem Vendor ID: 0x11ab
Subsystem ID: 0x5321
Revision ID: 0x0022
Link Width: x1
BSD name: en0
Kext name: AppleYukon2.kext
Location: /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleYukon2 .kext
Version: 3.2.1b1
Hardware Overview:
Model Name: MacBook
Model Identifier: MacBook1,1
Processor Name: Intel Core Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 2 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MB11.0061.B03
SMC Version (system): 1.4f12
Message was edited by: bhughes2172

let me reiterate. 27 ' iMac 3.06 GHz Intel Core 2 Duo just updated to 10.6.6 uses AirPort to access the internet. Set up to share it's internet connection via ethernet with PPC Dual 2.3 G5 running 10.5.8. Up until the 10.6.6 update things were fine. After updating the iMac's OS, the PPC lost it's internet connection. On the PPC's network System Prefs, the built in ethernet is connected and green. The iMac is in the finder under Shared. On the iMac, the PPC is in the finder under Shared and in Network settings the ethernet connection has a self-assigned IP with a yellow light. I have reset and rebooted all settings and devises on the network with no resolve.

Ethernet Port not working

I had bought a new HP ENVY 15-AE009TX just a week back and now suddenly my ethernet connection is not working. It seems the problem is with the port because the 2 lights keep disappearing and start after a few seconds i thought they were supposed to be on constantly one white light and another blinking. I dunnow what else could be the problem the drivers seem to be fine. The troubleshooter in windows says to attach the ethernet cable when i already have it inserted. Any help is appreciated.

Which port are you using?
The second (upper) NIC is only activated once the first (lower) NIC is.
If you're trying to use the upper NIC without first using the lower NIC, that could be your problem.
Once you've verified that, check the switch settings and make sure the port is configured for auto-negotiation. By default the Mac will use auto-negotiation and it's possible that you won't get a link if the switch on the other end is not set the same (e.g. it's set for 100-full).
Of course, if you've changed the Mac's settings (in Network preferences -> Ethernet) to something other than 'Auto', then you should make sure the switch is set the same.

OSX 10.9 & ethernet port not working

Before I upgraded to OSX Mav 10.9 on my MBP 13" mid-2010, my ethernet port worked fine. Yesterday I plugged in using the ethernet for the first time since the upgrade and it doesn't work. The Network app says "unplugged" even though it clearly is. The router doesn't show a green light either when connected to any port. I know the cable and router are fine (both checked using a PC).
Am I the only one or is this a more common issue?
If so, is there a fix?

let me reiterate. 27 ' iMac 3.06 GHz Intel Core 2 Duo just updated to 10.6.6 uses AirPort to access the internet. Set up to share it's internet connection via ethernet with PPC Dual 2.3 G5 running 10.5.8. Up until the 10.6.6 update things were fine. After updating the iMac's OS, the PPC lost it's internet connection. On the PPC's network System Prefs, the built in ethernet is connected and green. The iMac is in the finder under Shared. On the iMac, the PPC is in the finder under Shared and in Network settings the ethernet connection has a self-assigned IP with a yellow light. I have reset and rebooted all settings and devises on the network with no resolve.

HP Photosmart C3180 All-in-One printer -- SCANNER not working.

I have had this HP Photosmart C3180 All-in-One printer for a couple years and all is well. HOWEVER, the one function not working properly is SCANNING. I can print fine and copy fine. But when I go to scan something my power button flashes for about 10 seconds and then stops. Nothing happens, and nothing scans. HP said it was not the printer itself, but something to do with my operating system through Apple. I have the current 10.5.6 version of Leopard.
If I can get any help from others I'd appreciate it!

HP provided this link to software which resolved my scanning issue.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-55009-3 &lc=en&dlc=en&cc=us&lang=en&os=219&product=1146331

Help...Brightness control button in Lenovo All In One C360-4061 not working

Hi,
I just bought All in one C360-4061, and the monitor very birght,it hurts my eyes...i tried to push the birghtness control button but not working.i tried the keyboard shortcut (fn+home and fn+end) but not working either.
anyone can help how to solve it ???
thanx
best regards
Solved!
Go to Solution.

hi esurjopurwanto,
Welcome to Lenovo Community Forums!
Open device Manager and look under Display adapters.
Uninstall the Intel HD graphics place a check under delete driver software for this device.
Then Download and install this driver for your Windows 8.1
Intel VGA Driver
Please let me know your findings
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

8500 All in One - touch screen not working

One minute the touch screen with all it's functions was working fine and then, bam (!), the touch screen stopped working and I can't even use the one/off switch to power the unit off - it does not respond. Funny thing is that the printer is still working from my computer so I can still send a print job via the wireless. With the touch screen not working I can't use any function from the unit itself (copy a hard copy, fax a hard copy) and if the unit runs out of paper I have to unplug it to reboot since I can't hit the 'enter' on the touch screen once I've reloaded.
Bottom line --- nothing from the unit itself works. Has a printer fairy locked me out or does this sound like a hardware error? Thanks for any help ...
Linda T

Excellent. Let me know how round 2 treats you. The sad demise could have been due to a couple of things...as a side question, is the climate where you live especially dry right now? I may request that our testers recheck how well we handle a static shock on the product if it is dry where you live.
Regards, CF
I work for HP and hope to make your day Sproutastic!

HP 7210 All-In-One Ethernet Port not working

Similar Messages

Maybe you are looking for