HP 7310 Printing in 10.3 and 10.4, but not 9.2 and XP Pro

I have a networked HP 7310 inkjet running over Ethernet and TCP/IP, which worked fine until recently, when the Macs stopped being able to communicate with it when running 10.3 or 10.4 (I have some of each), but they have no trouble printing to it when running 9.2, either directly or in emulation. The network is otherwise fine, and the PCs have no trouble printing to 7310 at all. All of the computers (Mac and PC) print fine over Ethernet and TCP/IP to my old Apple LaserWriter 16/600. Deleting and reinstalling the printer does not work because the Macs running 10.X can't see the 7310. (although if I put them into 9.2, everything works fine.) Any ideas?

There could be a number of things causeing this issue and depends on what cd version you are using if it says anything below 7.3 then i would upgrade the software expecially on a 10.4 machine.
My recommeddations would be a complete uninstall of the software following this docuemnt
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00501015&produc t=391182&dlc=en&lang=en
You can use it on 10.3 as well as it says 10.4 but the folders and files are all in the same place
Download the newest Driver's
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?lc=en&cc=us&lang=en&os= 219&product=391182&dlc=en&softwareitem=mp-41035-1
And if you need OCR support just put back in the original cd and do a custom install and only check read iris
And then you well get your OCR support.

Similar Messages

HP Photoprinter C7280 printer. The wireless radio is on but not functioning - so no wifi conection.

HP Photoprinter C7280 printer. The wireless radio is on but not functioning - so am unable to gain wifi connection and print! - Why? How do I fix, Thanks

I would guess that the printer's wireless radio has died. Have you tried plugging the printer into your wireless router with an Ethernet cable? It should work and give you the same functions as wireless. Your computer or router will not care how the printer is connected.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

"printer is offline" appears on one computer but not the other (both windows 7)

printer is offline" appears on one computer but not the other (both windows 7)

This is pretty common to see when your firewall kicks in and blocks certain communication paths the printer takes.
Here's a list of ports and programs that when allowed through the firewall, will restore communiction.
Ports to open:
UDP ports: 427, 161, 139
TCP ports: 9200, 9220, 9290, 9500
Programs to allow:
hpiscnapp.exe
hpoews01.exe
hpofxm08.exe
hposfx08.exe
hposid01.exe
hpqkygrp.exe
hpqste08.exe
hpqtra08.exe
hpznui01.exe
hpzwiz01.exe
SLP_Service (also known as UDP 427)
Have your security software provider walk you through allowing these items through your firewall.
If this does not fix your issue, it is most likely an issue with the driver configuration. Your router may have assisgned the printer a new IP address and this can be changed in the properties of the existing driver.

HT4356 I can print from other applications on my iPad but not from Dropbox

I can print from my iPad using other applications but not Dropbox

Is your printer one of the models listed here: http://support.apple.com/kb/HT4356

Hi I am having trouble with iMessage on the mac book pro, it doesnt sync with the ipad and iPhone, both the ipad and iPhone do but not on the mac book pro , has anyone any suggestions, thanks in advance

Hi I am having trouble with iMessage on the mac book pro, it doesnt sync with the ipad and iPhone, both the ipad and iPhone do but not on the mac book pro , has anyone any suggestions, thanks in advance

First, make sure that all your devices are using the same Apple ID in iMessages including your Mac. Second, your messages that you've already started on your devices will not show up on your Mac - only ones that you start from now on will show up. Third, if you're still not syncing accross all devices, make sure you read the directions on the first page of this thread. It should work after performing those steps. Good luck!

TS1253 i have airport extreme, and printer works with my imac, but not with my mac book pro??

i tried setting up the printer under my wireless network only, and using the printer information, tried both and nothing works, my imac's same settings for the printer, and just cant get it to work.
i am ussing airport extreme, and it shows printer conecting etc. but then it says not programed correctly and it fails.
i dont know what else to try, i have followed every step on the manual, and nothing works..
someone help me

Could you open System Profiler on the iMac and the MBPro and select the Printers entry. Then in the top right pane you can select the printers entry and the bottom right pane will show information about your setup. Can you copy this information from both Mac's and paste back here.

Slug and bleed print fine from Acrobat 9.5.3 but not Acrobat 9.5.4

Our creative department is having issues printing slugs from Acrobat.
(slugs were created in InDesign CS5 and exported to pdf)
There are NO issues printing form Acrobat Pro 9.5.3.
Ther ARE issues printing from Arobat Pro 9.5.4.
The slug and bleed shows up in the print preview screen but does NOT print.
Does anyone have any advice or solutions?
Thanks!

Did you ever figure this out? One day I was printing slugs a few days later acrobat was not printing them, even though they show in the preview. Help?

Verdana Font not printing properly using Vista and Acrobat Pro v8

Has anyone got any ideas as to how I can fix this problem. When I send a word doc to the pdf printer that is all in verdana font it prints out gibberish, however, if in aerial or times new roman thats fine. I'm using Vista and printing via a terminal server.

S.D.A
I'm sorry but I'm not if the font is embedded as I expect it is, as I have no problem printing the font on various personal computers I use. However, the user that I am trying to support is having problems.
Previously when we were using Windows XP Pro and Acrobat Pro v8 and the user had no problems printing over the LAN. We recently moved and ugraded our systems to Windows Server 2008, Windows Vista and printing via Terminal Services. The fault may lie with the pinter drivers not being installed on the Terminal Server, but I'm not sure I just need someone to confirm they have had the same problem and how they fixed it.
Any suggestions would be greatful.

HP LJ4mv wireless printer worked with OS 10.5.5 but not with 10.6.3 - help!

My ancient HP worked with 10.4.11 and 10.5.1 thru 10.5.5 wirelessly. With 10.5.6 thru 10.5.8 installed, the printer did ot work and only the Adobe printer appeared in the Printer/Fax setup. With 10.5.5, I was experiencing random horizontal gray lines, polygons with gradient colors (cyan and magenta) flashing on and off and smeared dialog boxes and drop down menues. So, I upgraded to 10.5.8 and lost the artifacts and my wireless printer. All drivers are current (Software Update delivered/installed updated drivers today.)
10.6.3 is now installed and I still do not have a wireless printer. The Adobe PDF printer pops up and in the Printer/Fax dialog, it indicates "Kind" as HP LaserJet 4V/4MV Postscript. The Default button is active but all other buttons are grayed out and my printer does not appear.
Summary: the printer works, the wireless router works and the drivers are current.
Q. How can I get my wireless printer back? I need it badly.
Thanks.
Leonard

Kappy, thx.
The driver that is appearing now with the Adobe printer worked fantastically with 10.5.5, HP LaserJet 4V/4MV Postscript. This is from Apple, I believe. My printer does not show up when + is selected in the Print & Fax dialog and the Printer Name/Kind list appears. Only the Adobe is there.
I d'l'd/instld the Gutenprint. I cannot select it until the printer appears in the Printer Name/Kind field.
What is SL? :S
Greg, thx.
The printer is cat 5 to the ISP's wireless router and I am wireless. This has always worked up to 10.5.5. I incrementally d'l'd os upgrades 10.5.6, 10.5.7 and 10.5.8 and found the printer would not appear when I tried to add it. With Leopard, up to 10.5.5, my printer appeared automatically and I just had to make a selection from the "Print Using:" drop down.
Bruce, thx.
AppleTalk was a part of the setup and in 10.6, I cannot find AppleTalk. So you may be right about the IP route. Would Apple change this in the middle of Leopard with 10.5.6 (it worked up to 10.5.5) and not with 10.5.0 or 10.6.0? Would there not be an announcement that AppleTalk printer support was ending? No one in these forums knows that AppleTalk printer support was ended (I first posted in the Leopard forums)?
Sorry for the skepticism. I just did not think this was a possiblity but maybe you are right.
Is there a way to get an Apple reading on this? Should I set up a print server for wireless access? Any other suggestions?
Thanks again all. I much appreciate your help.
Leonard

HP Officejet Pro 8500- prints wirelessly from one computer in network but not the other

I can print wirelessly from my laptop, but not my desktop. The printer shows on the list, checked as the default, and READY, but document does not seem to find its way there. It never shows up in the print queue.

Download and run this utility. It should indicate what is wrong.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Duplex print setup error - Namespace prefix 'section' used but not declared

Hi All, I am getting the below error while trying to preview as PDF document. The issue seems to be caused by adding the below to form field in the rtf template (removing the below i can view the PDF document but it does not work as expected ie printing the terms and conditions to back of the page)
<?section:force-page-count;'end-on-even-layout'?>
Error::
Caused by: oracle.xdo.parser.v2.XPathException: Namespace prefix 'section' used but not declared.
     at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:782)
     at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:564)
     ... 15 more
FYI: I have been using the below link as example
http://blogs.oracle.com/xmlpublisher/2007/10/here_are_my_terms_conditions.html
Also reviewed the following link too apart from reading the user guide
http://winrichman.blogspot.com/search/label/BI%20Publisher%20Last%20page%20continued
Thanks, Maha

Hi Maha,
I have used the <?section:....?> command a few times, and I think it has to be enclosed within a <?for-each@section:.....?> loop. If you are still having issues, then upload your template and sample XML somewhere and I can try to take a look for you.
Regards,
Cj

I use Photoshop Elements 11 to print panoramas. Works for jpeg images but not tiff. Suggestions?

I use Photoshop Elements 11 to print panoramas. It works for jpeg images but not for tiff images. Seems strange because PSE11 manages tiff images in all other processes. Anyone fared better?

Thank you for your trouble.
My images are not usually layered and the particular case I am about to quote, it is not. The dimensions are 10,546 x 2,790 and the image has 16.7 mbs. I use 8 bit colour. When I set up the print screens for tiff, everything is normal until I get to the last screen with the image set upon the photo paper. Then the paper size indicated with the image refuses to budge from the A4 size, so the panorama gets printed on that. I consulted the Adobe chat line and the expert could 't get it to work either. So he came to the conclusion that the tiff capability had not been extended to printing panoramas. In seeking advice, I thought someone might refer me to an updating patch!
Well done! You have confounded the system! I could not find any control that would override the setting.

E-print works on some e-mail address, but not others?

HP Officejet Pro8600
Windows 7 Ultimate
error: "550 5.7.1 Command rejected"
I am able to send and print e-mail print jobs from @hotmail.com and @live.com addresses, but not from @q.com (a Century Link primary domain for customers, not a corporate account). I have set up "Anyone can send ePrint jobs to this printer." These failed print jobs never appear in the ePrint Center listing of Recent Print Jobs. I have tried sending via Outlook 2010 and via the Century Link web based e-mail application -- they both return to me as bounced messages. What's going on here?
This question was solved.
View Solution.

There are certain email clients that are supported for ePrint. I included a screenshot of supported clients. Also, I am adding a link for helpful information about ePrint.

Mac 10.6.3 with Firefox 4.0.1: Can print from Word, PDF, Screen Shots, etc.--but not a web page. My Canon MP610 shows correctly as default printer.

If I use AOL's browser, I can print Web pages. But not from Firefox. Could be this problem began with upgrade to your 4.0.1.

If I use AOL's browser, I can print Web pages. But not from Firefox. Could be this problem began with upgrade to your 4.0.1.

Why are there print differences between Reader and Acrobat Pro

I have a PDF file generated by InDesign (CS3). When I print the PDF from Reader (8.1.4) I get lighter text than when the same file is printed by Acrobat Pro (9.1.0). A close examination of the printed letters shows that the text printed from Reader is not solid black, while the text from Pro is solid black.
Is this typical or is there something I need to do to improve the printing from Reader?

I am a CADD Coord. (CADD Mgr)designer) I used to do a lot of design. Just recently we have noticed that anything printed from Adobe, the reader or the full version, is printing so lightly in many cases that it looks like it is missing data. whenever we create teh PDF from Autodesk products or Bluebeam Revue, it is the same. Bluebeam prints perfect. Yet the exact same file printed through Adobe is very, very light. Even printing as image it does this. And it appears at random. Some people print ok, but the exact same printer sent by someone else, using the same method, comes out too light in Adobe.
I have contacted Autodesk and they have punted it back. Anyone have any answers or clues to fix? i send out deliverables for clients all the time and I hate to find out they print and miss something of the design.

HP 7310 Printing in 10.3 and 10.4, but not 9.2 and XP Pro

Similar Messages

Maybe you are looking for