HP 7310xi officejet all-in-one-printer Solution Center Windows7 64bit unable to install

Windows 7 64bit system doesn't have any downloaded HP in Programs Files folder but it has some folders downloaded on the 64bit Program Files (x86) folder, none of these folders have the HP Solution Center download, I’ve found the complete folder download but it doesn’t download what I’m looking for.
HP 7310xi officejet all in one printer, eventhough is as your technical support considers it as an old printer, my printer is not abused and has worked fine throughout the whole time, the HP Solution Center was installed before and since I lost the software disk and your website is totally incomplete by not providing this useful resourceful printer window. It really sucks what you've done by not allowing a customer to find what's needed in your website to have your product completely work. You should place a life term limit to your manufactured products if your website does not support them, then as a customer I'd look for another printer brand.
I've followed: Provost as per windows xp explanation and HP installer is not installing the HP software in Windows Program Files neither in Windows Programs files (x86), yes there's an HP folder without the main software, I've tried also removing %temp% and also deleted files from: C:Users\(your name here)\AppData\Local\HP\Digital Imaging, I've also tryied installing the full EU and was unable due to software issue.

Hi Bob_Headrick, there isn't a CD software for sale, HP is not selling it, I've also followed every posted solution to get the HP Solution Center important software icon and have installed:  
exe [1/1, 362.68M], followed aslo http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/officejet-7310-on-windows-7-and-HP-sol... http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/hp-officejet-7310xi-won-t-install-on-w...
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/officejet-7310-on-windows-7-and-HP-sol...
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/Fixing-HP-Photosmart-Essential-3-5/...
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/quot-HP-Solution-Center-cannot-run-beca...
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Uninstalling-Officejet-7310-all-in-one...
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/hp-officejet-7310xi-won-t-install-on-w...
 Jamieson http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/hp-officejet-7310xi-won-t-install-on-w...

Similar Messages

  • I have a HP g55 OfficeJet all in one printer.

    I have a HP G55 Officejet All in One printer. 
    I'm told HP has stopped making drivers for the latest Apple operating systems.
    I was wondering if I installed Windows xp and the correct G55 HP drivers for windows xp could I use the printer
    under bootcamp or would I still need drivers for the Apple OS.
    Thanks for any help I trying to decide what which way to go to update my desktop. Go Apple or fight my way through Windows 7 or 8

    There is an alternate driver suite for Mac OS X known as Gutenprint. It lists your G55 as a supported model so this would let you print directly from 10.9.
    Note that the Gutenprint v5.2.9 installer is not digitally signed, so the Gatekeeper facility inside Mavericks will block its installation. To get past Gatekeeper, you can hold down the Control key and click on the Gutenprint installer. A pop-up window will appear. Select Open and you will then have the option to install the Gutenprint driver.

  • Officejet Pro 8600 e-all in one; "HP Solutions Center, Web Printing, etc did not install.

    Windows 7; Wireless network; Today I installed my new Officejet Pro 8600 e-all-in-one wireless printer. When finished I was able to print, I set up e-print, and the scanner works, but could not find what used to be called the "HP Solutions Center" that I could click on to choose scanning, check ink supply, get "Help", and so on.  An HP 8600 printer icon installed on the desktop, but when I clicked it, it was just a bunch of meaningless jibberish but had no function. I went to "Start", then HP, and was able to somehow get a "Scan Icon" to open.  I did not get the option to set up "WEBPRINT", nor REGISTER MY PRODUCT,  and so on. In other words, the installation did not finish. I tried putting the CD back in, but no additional options were available except to re-configure, etc.  Thank you for your help.  
    This question was solved.
    View Solution.

     PM sent about Scrubber
    JonW
    I work for HP

  • Windows 7 64bit Photosmart All-in-one C6380 Solution Center Issue

    Finally stumbled on re-installing printer SW so I was able to bring up the Solution Center page after a week of effort.  The problem is it errors out after clicking on the scan buttons for either pictures or documents with the following dialog box pop-up message:  "HP Imaging Device Not found", followed by a bunch of instructions for recovery, that don't work.
    What I need is an older version's Imaging Device and Features files, and I don't have them on my original disk that came with the printer!  And I don't know where to go get them.  I've gone through the Shutdown, reboot, uninstall/reinstall device, etc. instructions and nothing helps todate.  Does anyone have any thoughts on what I should do next?  Installing the FULL version of the printer SW doesn't cut it!

    Hi GNC,
    Welcome to the HP Forums! I understand that you are getting the HP Imaging Device Not Found error. I am happy to help you with this issue! Please take a look through this guide. 'The HP imaging device was not found on the network' Message Displays on the Computer (Windows).
    Hope this helps, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Hp officejet all in one printer 4500 G510n problem downloading software and driver

    When i download the software and drivers for the officejet 4500, G510n, and attemp to extract the file it will not open indicating that the file is corrupt.  I have tried it numerous times using both my AOL browser and Internet Explorer.  Any suggestions Thank You. 
    This question was solved.
    View Solution.

    Hi @salsan,
    Welcome to the HP Forums!
    I understand that you are having a problem with downloading the driver for your HP Officejet 4500 printer on Windows XP. I am happy to look into this issue for you!
    When you finish the download, it should show how big the file size is. Does it show that the file is 224.69M after it is finished downloadng? Perhaps, it is stopping the download before it finishes. I would recommend trying another browser such as Firefox or Google Chrome.
    What version of Windows XP are you are using? If you do not know the Operating System you are using, please visit this website. Whatsmyos. Is it 32-bit or 64-bit? Is the Windows Version on My Computer 32-bit or 64-bit?
    Thank you for posting, and hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Can't connect wirelessly from my HP G72 Laptop to my HP 7410 Officejet All-in-one Printer

    I have a HP G72 Notebook PC and a HP Officejet 7410, with wireless capability. I also have an Imac that I downloaded the 
    driver Officejet 7410 to and it connected directly to it not through the hub. Why doesn't an HP laptop connect directly to an
    HP officejet printer? Thanks

    Do you have a wireless router?  Is the printer connected to your router?  What router is it?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Hp 4630 officejet all in one printing

    Hi all:
    I am having a repeat printing problem. 
    When I try to print to HPofficejet 4630, I get this error message: "the printer could not connect to the server. check the internet conection or the proxy settings."
    I had this problem when I set up the printer 2 months ago. This problem initially stopped when I hard wired the printer. All worked fine for awhile but has stopped printing again. The only way to print now is to turn printer on & off every time.!@#$%
    I reset 'Web Services' and everthing else, connectivity wise, checked out. Not sure how to check & see if I have latest firmware update or drivers or even if thats important! 
    Thoughts? * Thanks so much!

    It has the same troubleshooting steps

  • I have an hp officejet all-in-one printer 60C8FE

    My printer suddenly does not want to take commands from my computer.

    Hi gdaskalakis,
    I'm sorry to hear you are having problems setting up your printer since you upgraded to Mountain Lion.
    I have included a link on how to download and install the software and drivers from the HP Website.
    http://www8.hp.com/us/en/support-topics/printer-installation/install-download-pr inter-drivers.html?jumpid=reg_r1002_usen_c-001_title_r0001
    That will allow you to have the full feature software and drivers.
    Happytohelp01
    I work on behalf of HP

  • Which Officejet All-In-One's take 350/350XL/351/351XL cartridges?

    Hi!
    I am in UK & want to buy a new HP Officejet all-in-one printer/scanner/copier (with or without fax facility).
    I already have a fair stock of HP 350/350XL & tri-colour 351XL ink cartridges & bearing in mind how much they cost, I think it would make economic & environmental sense to find a new HP all-in-one that will take these cartridges.  I know they fit the J5780 & J5785 but cannot find anywhere in UK currently stocking these models.
    Would be EXTREMELY grateful if anyone out there could please advise me on which current all-in-one HP models take these cartridges and/or where in UK I can find the J5780 or J5785 for sale.
    Thanks in anticipation!

    Mine does this too - regardless of whether the cartridges are actually present.  It seems to do with the mechanics which move the tray underneath the cartridge home position.  Any solutions?

  • Officejet 7310xi All in One Printer no longer connects wirelessly

    Hello all,
    My Officejet 7310xi All in One Printer no longer connects wirelessly.
    The printer does no show up while searching for it wirelessly where it had previously.
    In the past it would say that the printer (HP Series 7300) was offline.  I would remove the device through the control panel and search again.  A printer would be found as HP Series 7300 (Copy 1) . A "ghost" of the original would remain as an offline device.  I would default to the new printer icon, Copy 1, and it would work.  This happened over the course of a year without any problems.
    Now nothing is working.  The printer can't be found by my network.  I tried downloading drivers, etc. from HP but they either can't download or stop during installation. I don't know if an Windows 8.1 update affected it.
    Although the printer has a built in  network set up option, it has no installation wizard.  I can't find a way to activate the wireless feature/icon.  There is no I.P. address either.
    I feel like a monkey pulling levers for a banana!  I appreciate your help.

    Hey @Kathlanta ,
    Thank you for taking the time out of your day to ask that question on the HP Forums today!
    I understand you are having issues with your HP Officejet 7310xi connecting and staying on your network. Going through all of this is making you feel much like this;
    By the end of this I want you feeling more like this;
    Now let's get to the bottom of this and have some fun doing it! (and no, I have not completely adopted the idea that you are a monkey, but for the time being, seems most fitting LOL )
    Ok, so what we are going to start with here is; a full print system uninstall and reinstall and run it through USB to test the printers functionality.
    Here is how you uninstall the whole printer software on 8.1 >> Uninstalling The Printer
    Here is how you install the drivers offline (use the appropriate links to get your steps) >> Installing HP Printer Software for a USB Connection in Windows 8
    You wont need to worry about the wireless right yet until we figure out if the rpinter hardware is ok or not. So sit tight on that portion, I'll get that all back and working later after we figure this stuff out now.
    Look forward to hearing back from you! Have a good one!
    I worked for HP.

  • Hp officejet pro 8500 premier all-in-one printer

    The above printer is 1 1/2 years old and it has stopped printing.  When the printing became light, I installed new print cartridges less than a week ago.  Now, after five days, the printer is consistently cleaning the print heads and aligning the print heads and my documents are not being printed.  And, what is most frustrating, during all the cleaning and aligning, all of my new ink is gone and I'm receiving a message replace ink cartridges.
    Re: Problem with HP Officejet Pro 8500 printer: cleans printheads every time it's turned on
    Options 
    08-24-2011 06:34 PM
    Well,
    to this is say, "get used to it", or throw it away.  Many, Many, Many people have had trouble with this printer.
    The following are common and frustrating issues that this printer exhibits on a regular basis:
    1.  Constant Self-Checking (usually every 20-30 pages of print)
    2. Very persistant Printhead Cleaning/Checking, (Every startup and after about 20-30 pages printed).
    3. Worn-out printheads (usually within 1,100 to 1,500 pages printed).
    4. Paper mis-feeds. 
    5. Paper jams.
    6. Nearly impossible to use once the printer reports ink-depletion.
    7. Nearly impossible to use CIS Ink for larger print jobs.
    8. Ink and printheads "expire" regardless of when they are placed into service. (get a deal on ink or printheads last year?  Too bad, the warranty is already expired, most likely).
    In short, this printer is the most EXPENSIVE printer I've ever owned, and the most frustrating to use. 
    I have just over 2,000 pages of regular text printed matter with very little color, and have already gone through 4 sets of ink, and 2 sets of PrintHeads. 
    Although it's true that you can leave the unit on, and let it go into standby, you should NOT be punished with constant and time-consuming "self-checking" everytime it's turned on, or prints a handful of pages, BUT, it does NOT appear that HP will be standing behind this printer disaster.  AND, to make things worse, they've gone on to redesign it, giving it a different look, and so there are about 6 different models/versions of the OfficeJet Pro 8500.
    Anyone needing a reliable print/fax/scan/copy solution should look beyond this printer, because it will leave you wanting more, and spending more than you ever imagined you would have to on a late model printer.ro
    What is going on?  Why does it just automatically clean and align?  I also get alignment failed messages.  Any suggestiions?  

    rammerjammer,
    Thank you for bringing this to my attention, your feedback is very important and I want to do my best to help.  To answer what is going on, since the printing became light, started cleaning itself constantly, and fails the alignment, the printhead was damaged.  Click here to see and use the Limited Warranty for HP Ink Cartridges, Printheads, and Related Supplies.  There are many ways to contact HP.  The number to call is 1-800-474-6836 for HP and Compaq products for Home & Home Office use.  If you no longer have a warranty with the printer you can still use the warranty that comes with the printhead or ink cartridges.
    If you have a carepack with the printer that extended the one year warranty then the troubleshooting will be covered along with the printer if the printer needs replacing.  Check product warranty here, see HP Out of Warranty Support Options for Select HP Consumer Printers here.
    To order a new printhead you can go to HP Sure Supply and enter your printer or go to the HP Parts Store and order the printhead by part number C4900A for the Black and yellow and part number C4901A for the Cyan Magenta.  These printheads go by region also so be sure you are using the right region, these were found using the United States region. 
    The HP Officejet Pro 8500 Premier All-in-One printer has separated the ink cartridges from the printheads.  The ink cartridges are on the lower left and the removable print heads are on the carriage inside the printer.  The printer goes through a calibration process when turned on that will use ink.  Leave the printer on and let it go into stand by mode.  This type of printer is energy star efficient and made to calibrate on start up and be left on.  Allow the printer to clean or calibrate only if the printer must.  If it starts cleaning a lot it may be time to do a little maintenance to the printer (recommend once a month for maintenance).  Please see the following links for further details.
    Cleaning the Printhead Contacts
    Printer Paper Tears, Wrinkles, or is Damaged while Printing from the All-in-One
    Paper Path Issues in the Automatic Document Feeder
    Officejet Pro 8500 User Guide
    The printer has a duty cycle of 7.5k page/month.  The XL cartridges have a composite page yield of 1.4k pages with about a third of the black ink left over.  To me it would seem that the printhead should last somewhere in between.  This printer was designed to save money on ink compared to the rest of the officejets.  I hate that it has been causing so much trouble, hopefully the information I provided will help.
    HP Officejet Pro 8500 Premier (A909n) and 8500 Wireless (A909g) All-in-One Printers Product Specifications
    Click here for page yield information.
    Click the Kudos on the left side for helping and click Accept as Solution for providing a solution. I work for HP.
    Best Regards,
    Kenneth

  • OCR with HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

    Hello:  I have the "HP Officejet Pro 8600 Plus e-All-in-One Printer model N911g" and read in the manual that it comes with Optical Character Recognition (OCR) software.  I can't find any OCR software on the accompanying optial disk "HP Officejet pro 8600 series, Windows XP, VIsta, 7, 8 version 28.8".
    I'm using an HP Pavilion dv7 laptop running Windows 7 Home Premium ver 6.1.7601 Service Pack 1 build 7601.  
    I found an entry in All Programs called I.R.I.S. registration but can't figure out what to do with it.  Any help is appreciated.
    Thanks,
    John

    Hi,
    It's an option during the installtion process. Please try the following Utility:
       http://ftp.hp.com/pub/softlib/software12/COL29914/HU-135728-1/hpusetup.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Officejet 4500 All-in-One Printer - G510g installation windows 8.1 64bit

    After operating a HP Officejet 4500 All-in-One Printer - G510g  from both an old Windows XP notebook and from an ASUS Windows 8, 64bit laptop, subsequently updated to 8.1; I'm now trying to install it to run from a Toshiba Satellite NB10T-A notebook Windows 8.1 64bit, but without success.
    The original installation CD does not provide an installation but on start up (presumably because it is only compatible with Windows XP and 7.
    The www.hp.com site offers a download of a full driver for the  printer, forWindows 8.162bit. This seems to download fine. The file unpacks, says it is installing, but on completion the driver is not available.
    There are no options to uninstall, either in control panel/printers or in control panel/software.
    Without the driver, the Windows 8.1 system recognises the printer and allows simple printing ffrom applications. However, it is not possible to use the scan options, giving the error message that the driver is not available. Neither HP Solution Center or HP Document Manager are installed.
    I have tried HP Print and Scan Doctor. This recognises the printer on USB link, says that there are missing drivers, downloads, unpacks and installs drivers. But the printer icon in control panel/printers continues to have an alarm icon and indicates that the printer is still missing drivers.
    I have also tried the HP Printer Installation Wizard. The result is similar.
    Please advise how I can install the scan options of this equipment and confirm that the machine is compatible with windows 8.1 64bit.
    Thank you
    This question was solved.
    View Solution.

    Hello @monc , welcome to the HP forums!
    I read through your post about how you cannot scan on your Windows 8.1 computer as the driver and software doesn't seem to be completing successfully on your system. However, you have been able to install the printer and its functioning fine on other computers.
    I would suggest checking the Control Panel to see if there are any printer files to uninstall: Uninstalling the Printer Software  
    Restart the PC afterwards
    Perform a Clean Boot
    Restart the PC again
    Download and install the printer again:  HP Officejet Full Feature Software and Driver
    If you see any error messages or codes during the installation process, make note of the exact problem or error and post me back a screen shot or the details.
    Good luck
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Officejet 4630 all-in-one printer Cancels Print in Middle of Job

    Hi,
    I recently bought an HP Officejet 4630 all-in-one printer, and it automatically cancels jobs in the middle of printing. The computer I am using is an HP Envy dv7 with 64-bit Windows 8, and I am printing over a wireless network connection. My computer receives an error that HP Officejet 4630 series couldn't complete print and the printer simply says canceling. I have tried all the steps in the troubleshooting sections, both for printing issues and network connections. I've uninstalled and reinstalled the software multiple times, I've established a manual IP, and everything else, but nothing seems to work. It also seems to have the issue when using HP ePrint. It happens in all sorts of programs and formats such as word, pdf, and html. Unfortunately, I did not receive a USB cord, so I can't see if that will fix the problem at all. Hopefully somebody can help me with this, otherwise it's obvious that there's a problem with the actual printer I got and I'm going to have to get something else.
    Thanks
    This question was solved.
    View Solution.

    This is how I fixed it:
    Find out what the IP address is that your printer is using. 
    Then go to control panel and click on "View Devices and Printers".
    Look for your printer an right click.
    Click "Printer Properties" and a new screen will open.
    Along the top you will see some tabs. Click the one that says "Ports"
    Click "Add Port"
    Highlight "Standard TCP/IP Port" by clicking on it, then click "New Port".  A new screen will open.
    Click "Next"
    Type in the IP Address of your printer and click "Next"
    Your computer should find your printer.
    Click "Apply" and your printer should work correctly.

  • HP Officejet J4550 All-in-one printer Unable to print pages/photos from system request !

    I have an HP Officejet J4550 All-in-one printer that I had set p when I bought my new Acer system with Windows 7 installed and had no problem from the beginning to set-up the installation and have it running as My Default printer and has worked fine up until now ; when all of a sudden the system ;when I go to print a page/photo brings up the set-up - shows the printer as Default and then when I run PRINT...there is No page/photo printed out ? I have tried to run the Diagonistic software and shows the printer as Default and No problems and yet still delivers No Print out ? My system has had All up-dates automatically installed up till this point ...So I not being a Techie  ,do not know what or where to look for help to resolve the issue next ? Anyone able to tell me what to look for to do or how to resolve the issue or do I need to just Un-install the printer and Re-set it up again ?? I have tried to look at all places on HP ;but it does not even show my older HP Officejet -J4550 - All-in One Printer ? Just keeps referring to HP Officejet -4550 ?  Loooking for any answers ! Thank Yopu ,JS

    Hi jspin3,
    I'd like to help.  For now, I would hold off on the uninstall and reinstall.  Can you answer some questions?
    Is the printer connected by USB, Ethernet or wireless?
    Do you get any error messages?
    Does a blank page come out or do no pages come out when you try to print from the computer?
    If you put a document face down on the scanner glass, are you able to make a photocopy?
    Can you estimate the ink levels, in percent full for each cartridge, by looking at the printer ink gauge?  Click Here 
    If you print a  Self Test Report,  do all of the colors print?
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input ! ___________________________________ _____
    Thank You,
    Rich
    Expert

Maybe you are looking for