HP 7410 All-in-one - incorrect paper size error

When I print envelopes thatb are not a standard size I get an error before each envelope prints saying the paper size does not match up.  I make sure I enter in exactly the size of the envelope but it still stops before eacvh envelope.  this is so annoying when I print a 100 envelopes at a time.  Does anyone know how to fix this?

I'm having the same issue. Did you ever find a solution? I have two lights in the resume section, and the one blinking is the on that looks like a black water drop. I thought it might be the ink, and I just went out and bought a b/w, and color cartridge.  That didn't work. I've opened and looked through the back and the front, and I can't find any paper. I read somewhere that I should delete the software, and re upload. I deleted it, and thought I had the software...yep, I don't dummy me. Now I need the software for it...it always seems to happen when I need it most. I've also noticed that everything stalls to print, when I use quick print. 

Similar Messages

  • HP Photosmart C4488 all-in-one custom paper size issue.

    Hello, I just bought a new HP photosmart C4488 from the store. Not exactly just, few days back. I need prints on custom paper sizes. Heres my problem
    I have a paper, plain paper, of dimensions 11.2x19.1 cms (measured by normal drawing scale). I designed an image in Photoshop with the same dimensions and 300 dpi resolution. But when I try setting the custom settings to that dimensions, I can't press OK. See the attached image for more clarity.  Dimensions in the screenshot are different, but still I can't press OK there!
    "Windows cannot detect any keyboard attached to the computer. Please press any key to fix the problem"

    I had this same problem and discovered that what I had to do was give my custom size a name, then after you do that, you get the 'save' button and it will be listed among the seletions availabe under 'more.' I am not sure why it wouldn
    t have been possible to have put a little note saying to name your custom size as the current method isn't intuitive. On the other hand, now that I have the size listed, I can't figure out how to actually get it to work as when I choose it, it tells me the size is incompatible with the paper type and does that for all the normal paper types! So I hope it works and better luck to you on this than I am having..

  • HP Desktop All In One F2120 Paper jam error

    as far as i can see i don't see any paper jam inside.
    i can't find a definite solution to this, any help from anyone?

    I'm having the same issue. Did you ever find a solution? I have two lights in the resume section, and the one blinking is the on that looks like a black water drop. I thought it might be the ink, and I just went out and bought a b/w, and color cartridge.  That didn't work. I've opened and looked through the back and the front, and I can't find any paper. I read somewhere that I should delete the software, and re upload. I deleted it, and thought I had the software...yep, I don't dummy me. Now I need the software for it...it always seems to happen when I need it most. I've also noticed that everything stalls to print, when I use quick print. 

  • HP Photosmart 7520 e-All-in-O​ne Printer when trying to photocopy says incorrect paper size

    HP Photosmart 7520 e-All-in-One Printer - WHEN i AM TRYING TO MAKE A COPY COPY OF AN A4 DOCUMENT WITH A4 PAPER INSTALLED.  iT KEEPS PUTTING THROUGH A BLANK SHEET AND SAYING INCORRECT PAPER SIZE.   HELP!!
    I HAVE CHECKED FOR UPDATED SOFTWARE ETC, CLEANED THE GLASS, TURNED OFF AND ON ETC - NO LUCK.
    Why is it such a major task just to photocopy one standard piece of A4 paper with just a letter contained no photos etc or anything too tasking.
    Any help much appreciated

    Hey there @SMFTEDDY ,
    I saw your thread and messages and wanted to add to it. I have checked the Copy Menu on the printer itself (below), and it does not contain the option to copy in A4 size. You might just have to use the work around scanning method recommended above to get to use the A4 size you wish to use with the Photosmart 7520.
    Good luck
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Officejet 7410 All-in-One no longer 'automatically' print double sided

    After upgrading my PC from Windows XP 32-bit to Windows 7 64-bit my HP Officejet 7410 All-in-One printer no longer prints double-sided automatically.  When sending something to print I am presented with only two options: Print One-Sided or Manually Print on Both Sides.  If I choose the latter I have to manually reload the paper when prompted.  I have tried searching for updates and downloading drivers but nothing  has resolved the problem.  I've even gone into printer properties printing shortcuts and changed the settings in "Print on Both Sides" to 'automatically' and still I am prompted to reload the paper.  It is a real pain when I have to print a very large slide pack especially when the printer decides to pick up two sheets at the same time.  I have spoken to HP and they say my printer is old and they cannot help me.  It is about 8-10 years old.  Any advice would be gratefully received. 

    Hello Toosweet
    In Printer Preferences make sure the duplexer is enabled. Do you have the full feature software installed?
    Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
    When a solution is found please mark the post that solves your issue.

  • HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are a problem

    HP Photosmart 2610 All in One Printer   Paper feeds OK but the software and sensors are not allowing paper to feed until several steps are taken first.
    (I am using Windows 7.  I also use the virtual XP mode and mostly MS Office 2003 docs). 
    I have had this printer for several years and love it.  Before I toss it out, I thought I would check if I could get it to work properly before I buy another printer.  Note: I did put in a new HP black cartridge (because it was out of ink) but the printer was not working properly for several days before I changed the cartridge. The printer was at step 5 before ink change.
    Lately, each time I turn on my printer, I have to go through the same routine
    1. The printer wants to align the cartridges so I push OK
    2. The paper feeds into the printer and stops at the exact place to start printing.
    3. Error message appears that it is out of paper.  So I press OK to continue.
    4. It says "aligning print cartridges" runs through 2 sheets of blank paper without trying to do anything and then states "cartridge alignment failed"  "Press OK to continue"
    5. Screen is now normal and it appears it is going to work.
    6. It makes no difference if I used the copy function OR when I send a print job from the computer, the paper feeds into the printer and stops at the exact place to start printing but nothing happens.
    7. Error message appears that it is out of paper. OR that it is the wrong size paper.  I pull the paper that was at the proper place to be printed from the printer and then the error message says "Paper jam.  Press OK to continue"
    8.  I press OK.  The printer will then quickly feed in and eject 2 sheets of paper before it will actually start printing the print job.  It will work fine after this as long as I print from the same document.
    9. If I want to print a different document then I have to start all over again at step 6 to get the printer to work.  If I shut the printer off I have to go back to step 1.
    What I have already tried
    A.  Uninstalled and reinstalled the printer driver direct from HP web site.  I have done this several times with both the basic driver download and the complete package download.
    B.  I have done a partial reset by unplugging the printer, and then re-plugging the printer while pushing the  "# and 3" buttons while turning on the printer.  I have done this several times.  Each time it will work fine until I try a different document of turn off the printer.
    C. I have downloaded the HP Print and Scan Doctor and used it several times.  It states that "everything checks out OK"
    D. I have downloaded the HP Hardware Diagnostic Utility 4.0 but it does not work with my printer.
    E.  I have cleaned all the rollers and blown air throughout to make sure there were no bits of junk in the paper's path or blocking a sensor.
    F.  I have tried different brands and weights of paper (all 8½  x 11) but nothing works.
    Most of the problems started when I added the printer to the virtual machine so I could print XP files.  This may just be a coincidence because the printer has the same problems when I use the copy function without the computer being on.
    Thanks for looking at my issues.  Any help would certainly be appreciated.

    I just tried using Notepad as you suggested and had the same result.  Paper feeds in stops at proper place and error message "out of paper" 
    I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem. 
    I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner.  One for black and one for color.  The ink icons would change from completly full to just an outline as the amount of ink went down.  Currently the black ink icon is missing
    This is a very frustrating problem because the printer works great after doing a few steps to get around the problem.  The fact that the problem reoccurs any time anything is changed is the major problem
    Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs.  This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
    I want to thank you for all of your efforts.  Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer.  As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

  • HP Officejet 7410 All-In-One Doesn't work after installing Snow Leopard

    installed Snow Leopard yesterday ....my HP 7410 printer doesn't work properly ....take a look at the response the HP Service Center gave me:
    +Hello Charles,+
    +Thank you for contacting HP Total Care.+
    +I understand from your email that you want the 'HP Officejet 7410 All-in-One Printer' software driver for 'MAC OS X 10.6'.+
    +I appreciate for the opportunity to assist you.+
    +*Charles, I regret to inform you that the unit does not support the operating system. I recommend you change the OS to Microsoft Windows to avail the unit software driver.*+
    +I will be more than happy to assist you when you change the OS.+
    +For information on keeping your HP and Compaq products up and running, please visit our Web site+
    at:
    +http://www.hp.com/go/totalcare+
    Sincerely,
    Sentinaro
    +HP Total Care+
    +Our advice is strictly limited to the question(s) asked and is based on the information provided to us. HP does not assume any responsibility or liability for the advice given and shall not be liable for any direct, indirect, special, incidental or consequential damages in connection with the use of this information. Always back upyour data.+
    +For more information, including technical information updates, please visit our Web site at http://www.hp.com/support.+
    +HP does not require you to send any financial data in your reply to this email. As a prudent reminder, do not insert credit card details or other financial information in any e-mail replies.+

    Help! I've spent hours researching this and can't find a solution...
    I upgraded 3 Intel Macs in the house to Snow Leopard last weekend. All went differently...but all were successful. I found that the connection to my HP Officejet 7410 (connected wirelessly to 802.11g Airport Express (AEX) network) was "broken". Deleted then "re-intalled". Documents could now be printed. I then found out scan function was "broken". Figured out how to scan with new Snow Leopard "baked-in" driver and Scan tab...different, but it worked.
    Then, tonight, on the eve of my birthday, I was given the green light to purchase an Airport Extreme 802.11n (dual-band) base station (AEBS). I set it up and got 2.5X speed on the two 802.11n laptops in the household. Glorious! Then I went to work to ensure print and scan functions were still operational. Tried to re-connect HP OJ 7410 to wireless network...when it found the network it asked for the "WEP" key (on previous AEX network I was secured utilizing WPA2/Personal)...I entered the WPA2/Personal password (same as previous network) and got the error message "Key must be 5 or 13 characters OR 10 or 26 length with 0-9 and A-F (hex)". So I turned off the wireless radio and instead plugged the 7410 into the AEBS via USB. Deleted the previous queue and re-installed. Found the printer no problem but now without the Scan tab or function anywhere...despite following all the recommendations found both on the HP site and here in the Apple Forums. I print fine. Can't for the life of me figure out what the problem with the now lost again Scan function is.
    Only strangeness I can think of is the following: When setting up the network(s), I had the option of naming the 5 ghz band something different. I set mine up with the same name of the 2.4 ghz network with 5ghz in parenthesis (i.e. BobbyG and BobbyG (5 Ghz)).
    Sorry for the long post but we need the scan function in the house for my wife's teaching purposes. Any assistance would be GREATLY appreciated.
    Very Respectfully,
    Bobby G.

  • Remove and check cartridge on right error message on 7410 all in one

    I recently changed the black ink cartridge in my 7410 all in one printer. After changing cartridge it gave me an error message of " Remove and check cartridge on right". I have tried removing and reinstalling , cleaning connection points with clean damp cloth (water) and still cannot get error message to go away.
    Any ideas would be greatly appreciated. Thank You.

    NoProblemAtoll wrote:
    I know this is an older thread but being it is a top Google result associated with the "Remove and check cartridge on right" error it justifies adding a helpful suggestion for other.  Our findings have been HP Printers are very biased against refilled \ recycled cartridges.  I own a total of (5)x HP 7310 and HP 7410 printers in my IT Consulting office.  These are feature rich MFP’s with an abundant supply of ink available at generously economical prices.  On the face of it, it sounds like a good reason to keep a bevy of last gen printers around. EXCEPT the printers work great with the $30-$50 brand new HP brand 96 cartridges from Office Depot or Staples.  Unfortunately if you try and buy some recycled cartridges off ebay the Printers detect the recycled\refilled cartridges as a previously depleted HP cartridge that may not be genuine and the units suddenly turn on you.  Miraculously the "Remove and check cartridge on right" only manifests itself with non-HP brand cartridges or cartridges that have been refilled.  (We have even tried to re-fill out own refreshly depleted cartridges with like results.)  Think of it as an HP service reminder conveying you forgot to pay HP their $30-$50 profit on your ink this go round.  Remember you need HP Branded ink cartridges (HP = Homogeneously Proprietary).  It’s like an intention flaw written into the firmware.  Best guess (purely on conjecture) is there is a check in the firmware/drivers for if the cartridges has been previously installed, previously depleted, max install count, and expiration date validation.  If it encounters a condition it doesn’t like you get this nondescript error.
    [advertisement snipped]
    The above post is filled with conjecture and speculation, but is not based on fact.  The Officejet7410 is not programmed to reject refilled/reman cartridges.  It will check cartridges electrically for various things and will reject cartridges that fail.  Typical failures would include a cracked printhead (caused by rough treatment - dropping the cartridge even a few inches for example), or open electrical connections caused by   debris on the cartridge contacts.  Cleaning the cartridge contacts as shown in the document here may resolve the issue in case of poor electrical contacts.
    A cartridge that has been previously used in a different printer will likely be marked as empty, but the printer will happily print with a cartridge detected as empty.
    The reality is that the quality of refill and reman cartridges are very variable, but generally poor.  The study here has a study conducted by a testing facility, here is another study. 
    My personal experience has been similar.  I donated an HP all-in-one to my son's high school years ago.  Sometime later I got a call from the teacher complaining that it was not printing properly.  I went and took a look and found they had put in a renam color cartridge that was not printing one of the colors*. They tried another cartridge, which also had a problem and then finally the third cartridge worked.  I asked why they used renam cartridges and he said they bought these because they were cheaper.  I asked if they were 1/3 the cost....
    *The color missing had nothing to do with the printer - blotting the bad cartridge on a damp tissue gave only two of the three colors that would normally be present.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Scan function no longer available in preferences using HP 7410 All-in-One

    I have a Mac Book pro running OS 10.9.5. When I select Printers and Scanners in the preferences my HP 7410 All-in-One no longer shows a "scan" selection on my Mac Book. It only shows "Open Print Queue".
    It prints just fine and I know it used to show both the "print" and "scan" selection. I don't know when this ability disappeared. Does anyone know what I have to do to get this capability back? I'm not real computer savy so I appreciate all the help I can get. 
    This question was solved.
    View Solution.

    Hi,
    Click the Apple icon, then About This Mac and select Software Update.
    Allow it 30 seconds, then click the top Store menu and select Reload Page.
    If there is any HP or Apple update available insall it, reboot your Mac and check if you may scan then.
    If the same persists install the following package and check again:
    http://support.apple.com/kb/dl907
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP 7410 All-in-one identifies itself as a 7310

    HP 7410 All in one
    Win 7 64bit
    Mac
    Hi all, first time poster here. Someone threw out a perfectly (almost) good HP 7410 printer. I say "almost" because the printer identifies itself as a 7300 series both on-screen (in both OS's) as well as in the printer report.
    Also, the the serial numbers are different:
    on the label it reads {Removed for privacy}
    The printout reads as: Serial # {Removed for privacy}. Except the WIFI, the 7410 and the 7310 are identical. 
    All i can guess is that this is a refurb and that someone put a 7310 brain into the body of a 7410.
    Is the firmware fried? Can i roll it back? 
    the printer works great otherwise and no WIFI is no deal breaker, but it'd be nice

    Hi,
    Well, both series use same manual, as you mentioned only with or without one or two parts:
       http://h10032.www1.hp.com/ctg/Manual/c00235090.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I just upgraded to mac osx lion and my 7410 all-in-one printer will not work

    I cannot get my hp officejet 7410 all-in-one printer to work with Mac OS X Lion 

    hi,
    check this link for Mac 10.7 installation guide.
    l0ri3
    ~Though I work with HP my posts and replies are my own and not from HP.~

  • 7410 All In One will not connect

    I have a 7410 All In One.  It's about 3 years old.  Within the last 6 months it has been manifesting an ongoing problem.  When not in use for a period of time, it will simply stop functioning.  Upon disconnecting-reconnecting the power cord, the center screen will illuminate and a white bar across the bottom will appear suggesting it is connecting, but the "On" light will not come on.   According the hp site the drivers are up to date.  
    Another oddity is that when it is in this condition, it will suddenly come back to life.  This has happened a couple of times after anywhere from 6 to 12 hours.  Unfortunately, it is in this mode now and there are documents that have to be printed.
    It has never scanned properly, either, so the All In One functionality is pretty much nil.
    Does anyone have any thoughts on this?
    Thanks,
    WS 

    Hi YSJA,
    I'm sorry to hear you've had problems accessing your Officejet 7410 since adding the AirPort Extreme to your home network.
    I have included a link to HP's Wireless Printing Center troubleshooting section. It has section, "Was anything changed or updated on your router recently?" that has detailed steps to help you resolve the issue.
    Wireless Printing Center Troubleshooting
    http://www.hp.com/global/us/en/wireless/troubleshooting.html
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Fix for HP 7410 All-In-One Freezing after SN Upgrade!

    I upgraded to SN and immediately my trusty 2 year old HP 7410 All-In-One went into an endless initialization loop. All it would do was display the HP logo and a continuous progress bar at the bottom of the little screen on the front of it. After no effective solution from the HP site, and nothing that worked here, I went into online search mode and found a blog entry that walks you through getting the device back up and running. It sure saved me $500 that I didn't have to spend!
    I'd caution that this worked for me but I have no idea what the root cause was except something to do with the wireless card. The blog gives excellent step by step instructions to disconnect the wireless card connection but if your machine is still under warranty you COULD void that warranty I'd assume. But since this involves a simple unplugging of a connector that can be reconnected it's sure worth a try!
    As I mentioned it seems that there's an issue with the wireless card that is somehow responsible for the device locking up permanently as well as it becoming invisible over the network. It becomes unusable over a wireless network as well as via direct USB connection. This shakes it all loose and gives immediate access via USB. There is apparently a few ways to reestablish wireless connectivity but I need to research that a bit more. If/when I find that I'll add another post to this thread.
    http://larrycrazyness.blogspot.com/2009/01/hp-fixed.html
    After the initial blog entry there are over 150 responses from people that it has worked for including me. I'm not associated with that blog but I thought the information could save many the expense of a service call (that apparently doesn't result in a fix) and the cost of a replacement. Enjoy!

    UPDATE: As it stands, I opened the scanner bed and cleaned the glass Home Position strip (for the 6th time now) and low-and-behold, the printer functions properly again.
    I know this issue will happen again in a few weeks to a month or so...
    My question still stands...
    Can ANYONE come up with a permanent solution to repair this issue?
    Thanks again in advance.

  • Uninstalling the drivers and programs for Windows 7 SP1 64 bit of the OfficeJet 7410 All-In-One

    Hi
    Which utility should be used to properly and completely uninstall the drivers and programs for Windows 7 SP1 64 bit installed with the OfficeJet 7410 All-In-One printer?
    Thanks
    Bye
    balubeto

    Hi @balubeto 
    I located a software removal utility for you but if you have other HP printers or scanners you may perform the more basica uninstall.
    Software and Driver Removal Utility
    Uninstalling the Printer Software (more basic uninstall)
    I hope this resolves your inquiry.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Error Message flashing on Screen of 7410 All in One

    The screen on my officejet 7410 all in one printer fax  is flashing the word error (Ox84714145e1) and the auto answer light is alternatingly flashing. We have done the obvious by unplugging everything and trying to reboot but it is frozen.  Cannot turn it off with the power button.

    Hello there! Welcome to the forums   I read your post about the "0x" error code you're seeing on your Officejet 7410. Please check out the link below for the error that might help you! 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error Message Displays on the Printer Control Panel  If the troubleshooting does not help at all, I would lastly suggest technical support.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html Happy Holidays, 

Maybe you are looking for