HP 7450 Photosmart After Printing completes Printer cycles 1/2 page and gets fault

I have been through the mill with support and still no answer. My printer Prints Great, no issues. However, after it completes 1, 2 or 10 page documents the printer stops at the ready as it should. Then three seconds the printer starts it alignment cycle? You hear a lot of movement and then it pulls in a page 1/2 way and stops with a Jam fault. Pull the Paper out and push the ready button and it cycles and comes ready, then put the paper back in the input tray and you are ready to print. I have deleted everything out of my USB and also de-installed the printer and re-installed the printer. Nothing has changed this.
This problem started after a paper jam and trying to get the printer ready to print again. Again the Printer prints great and pages OK. It is just after it completes the print job that it gets this problem.
Thanks
John

I found a way to print at least 10 sheets before it faults out again.
1. Physically pull the sheet of paper out.
2. Remove all paper
3. press the large button on the front of the printer and let it completely cycle. You should get a green light when it finishes.
4. Put paper back in the paper tray and print.
Do this everytime it faults.
Also empty the paper tray on the last sheet of the print job and it will not fault.

Similar Messages

How can I print just a part of the page and not the full page with Adobe Reader v 10.1.2?

how can I print just a part of the page and not the full page with Adobe Reader v 10.1.2? I need to print a engineering print with lot of information but information is too small in letter size and I don't have a plotter.

Two ways to print a portion of a page: zooming or using the Snapshot Tool.
ZOOMING:
Zoom into the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure "Current view" is selected under "More options" (you may need to click "More options" to open it).
If you aren't satisfied with the preview, try clicking "Fit" under the Size button.
SNAPSHOT
Choose Edit > Take A Snapshot.
Drag a rectangle around the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure that "Selected Graphic" is selected under "More options".
To enlarge the snapshot to fit the sheet of paper, choose "Fit" under the Size button.
Hope this helps!

HT204135 I recently migrated from a 2 year old MacBook Pro to MacBook Pro Retina and now cannot get my LaserJet 3200 to print. I downloaded drivers from HP Support site but printer just prints a line of gibberish per page, and many pages.

I recently migrated from MacBook Pro to MacBook Pro retina. Now my macbook will not print to my LaserJet3200 printer. I downloaded the drivers but still only prints a line of gibberish per page, and endless pages, when i send printer a print job. Any recommendations on how to correct this so the printer prints properly again?

Hi
where can I find the "generic PCL driver" you referred to Greg?
Also, I searched for a LJ 2100 d4river and found these. should I be working with the HP website? or an apple website? my Apple software update is current.
Find by product
Go
How do I find my product name / number?
5 matches found. Please select one below
HP LaserJet 2100 Printer series
HP LaserJet 2100 Printer
HP LaserJet 2100m Printer
HP LaserJet 2100se Printer
HP LaserJet 2100tn Printer
HP LaserJet 2100xi Printer

Firstly I updated my ipad into ios7 and after watching the video by Apple, iWork, pages and numbers are free for download after updating iOS 7. How can I download iWork pages and number for free?

Firstly I updated my ipad into ios7 and after watching the video by Apple, iWork, pages and numbers are free for download after updating iOS 7. How can I download iWork pages and number for free? Please help me.

stevejobsfan is correct; iwork for ios is free only for new purchases of new ios devices. A good work around (if you have wifi connectivity) is going to the icloud website on your ipad, and working on your document.
A word of caution (the real reason I am responding to your post). If you do a lot of 'formatting' of a document on iwork for mac, and then save it in icloud; you will probably loose most of the formatting you have done (this will be true if you oppen the document in iwork for ios; also) It happened to me, and I did not duplicate the document before saving it to icloud; I lost at least an hours worth of work.

Printing completely broken on both airport express and time capsule

Printing seems to be broken on both my old time capsul, generation one, and a new airport express. Here's what happens.
1. Connect printer directly to the Mac and everything prints fine.
2. Reconnect printer to the Airport or timecapsule. Delete all the printers. Power cycle everything. Add printer. Print and it keeps trying to connect to the printer forever.
It use to work and it may have been a recient firmware update that broke it. Any help would be appreciated. I've been through all of the support documents and still nothing. The printer is an old Epson Stylus R280. I'm running 10.9 with all the latest drivers and updates.

If you want to run a N speeds, run a cable from Time Capsule to Airport Express, set Time Capsule as your primary router, and turn off DHCP on Airport Express. This will create two networks, your Express will have one SSID, and the Time Capsule another SSID. One G network and one N network. Don't include the express in your network, keep it separate from Time Capsule to avoid it from coming down to G speeds. Make sense?

ADOBE: How to print a table only on uneven pages and a text on the back?

Hi, I am looking for a clear document on how to use pagination and the Odd and Even pages.
We need to print a table over several pages, but the table should only appear on Odd pages. The even pages should be skipped. On the even (back) pages we need to print "Terms and Conditions". Is that possible? Can it be done without scripting?
We are using ADOBE version 8.1
In the file properties, double sided is switched on, and version set to 8.1 and higher.
I created two Master pages, a FrontPage with ContentArea1and a BackPage with ContentArea2.
FrontPage is used for uneven pages, BackPage is used for the even pages. The masterpages are printed correctly (alternating properly).
One page was created for the table, totals etc.:
ITEMS: contains item data (table with header and footer). Place is "On Odd Page". After "Goto page BackPage", so there is always one page with the text. And if the table needs to be paginated it goes to BackPage with overflow leader "Conditions".
What should happen is that on the front pages the item table is printed. If there are too many lines then it should continue on page number 3 then 5 etc. All the even pages should display text only.
What actually happens is that the item table also gets printed in the content area for the Condition text...
The best I could achieve is to decrease the contenta area of the back page. To force pagination. But still it prints one table record in the (very small) content area of the back page before paginating to the next page (front page again). If it only would not do that, it would be fine.
Cheers,
Edwin.

Fixed it... After a lot of creating, deleting, playing around with pagination and the inevitable cursing...
I have created 5 pages:
1. FirstPage
     - Odd/Even: Odd (Front) Pages
     - Placement: First page (In page set)
2. FrontPage (For Odd pages)
     - Odd/Even: Odd/Front Pages
     - Placement: Rest of Pages
3. BackPage (For Even pages)
     - Odd/Even: Even (Back) Pages
     - Placement: Rest of Pages
4. LastPage
     - Odd/Even: No Odd/Even Restrictions
     - Placement: Last page (In page set)
5. DummyPage
     - Odd/Even: Blank pages
The 'Terms and conditions' are located on the BackPage and LastPage (as a text).
The table that is printed is (of course) located on a normal page (flowed subform).
Pagination tab: Placement = Following previous, and After = "Continue filling parent". No overflow... Basically, it's all default.
The table lines will now start on the first page and if there are more lines than can be printed on this page, it will continue in the next content area. That will be on the FrontPage.
The trick is that each master page must have a content area (mandatory). Except for Blank pages, but these cannot be used... Blank pages would only be used once, after the first page.
What I discovered is that you can drag a content area away from the Master page and attach it to a different master page.
Logically, if there is no content area on a page, then data cannot be printed there. So, I created a Dummypage. On this page I dumped the content areas from the LastPage and the BackPage. As a result, content cannot be printed anymore on the back of pages. Only the standard text (a text field) is printed there. When the data from the table is overflowing, it will automatically overflow from the FirstPage to the next content area. Which is located on the FrontPages only.
The DummyPage is NOT used anywhere.
The result is that the records can only be printed on the content areas that exist on the First and Front pages. The back pages are now skipped.
Duplex printing is now working correctly, and the text is printed on the back of all the pages.
Cheers,
Edwin.

After a google search I click a topic, and get rederected to a completely different webpge. EVERYTIME. Can you please help me with this?

This has been going on for weeks. I've deleted and reinstalled Firefox at least a dozen times.
After EVERY search, I click the site i want, and get redirected to a completely different site.
Not to mention Firefox crashes quite a bit.
== This happened ==
Every time Firefox opened
== A few weeks ago

Jailbreaking devices is a bad idea (and for most people, it's really old school). Update the devices to iOS 7 and all of your problems should go away.

I am unable to print. Preview shows a blank page and it is blank when printed. I've tried all of the suggestions here. Any other ideas?

When receiving an email that I wish to print, nothing prints. The Preview shows a blank page and it is, in fact, blank when printed.

When receiving an email that I wish to print, nothing prints. The Preview shows a blank page and it is, in fact, blank when printed.

When I print large PDF's of 10+ pages I get multiple duplicate pages.

When I print large PDF's of 10+ pages the print order goes in the following sequence.
Page 1, Page 1-2, Page 1-2-3, Page 1-2-3-4, Page 1-2-3-4-5 .... and continues in that fassion until the printer is out of paper.
When a smaller document prints it comes out fine like page 1-9 in sequesnce as it should. I am using Windows XP Pro SP3 fully patched and Adobe Reader X 10.1.3. This is very strange as there is only one machine in the office that is doing it and I have tried instalingin and reinstalling the printers and the Adobe readr in order to fix this and there isn't really anything that I can find that might be causing the issue.

While we all have MacBooks in this forum not all of us use Pages. There's a Pages Support Community where everybody uses Pages. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/iwork/pages

Recentley printing most documents in firefox print on 1/4 of the page and not the complte document. When I print the same thing in safari it prints fine. Please advise how I can get proper printing in firefox

When using Firefox to print most documents ( boarding passes, mastercard statements,genealogy documents) the printing only shows on 1/4 of the page, is in the lower left quarter and does not print part of the right side of the information. When I go into Safari and print the same documents within 2 minutes they always print fine. We like Firefox and would prefer to continue to use but if we can't print we will have to use Safari more often

I have the same problem with cutting of the page since installing the new version. If you manually zoom out the print it only shows 1/4 of the page on a whole page of paper. Something is wrong here.
I have done all these steps and it still does NOT print correctly!
I am a IT professional and something is not right with the new firefox browser. Please supply with fix or we will have to permanently switch back to Internet Explorer, which works perfectly.

I can't get my printer to print to the edge of the page and can't find the right settings.

I am trying to create an A5 booklet from A4 spreads in InDesign which I have now done but for some reason when I print it is not printing to the edges of the paper. It's about 6mm short on the short edge and 3mm short along the long edge. I don't think the printer we have is full bleed but I would have expected to get a little closer than that to the edges. I have looked at document settings and zeroed all the bleed and slug options and I can't see anything else to change in the printers own settings. Does anyone please have any other idea what I might be able to change?
Many thanks

Unless a printer's feature list expressly touts "edge-to-edge" printing, it almost certainly cannot print to any of the 4 edges. It's a mechanical limitation, and 3 - 6 mm is pretty typical.
tobyhawksmoor wrote:
I would have expected to get a little closer than that to the edges.
Why?
It's likely there is nothing else to try. If you fed the printer something that would or should print to the edges, if the printer was capable of that, and got the 3 and 6 mm printable area margins, that's quite certainly the best it will do.

Why does my printer only use 25% of the page and shrink to fit?

when i print certain things it only uses 25% of the page. It is so small i can't read it. If i go to print preview and modify the size, it puts it on multiple pages. I can't figure out how to change any settings.

Firefox extracts the paper size information from your Windows printer settings, so that's the first thing to check. In the print dialog, if you click the Properties button and review the dialog for your printer, do you have a small paper size selected and can you update it?
If Windows is correct and Firefox is mistaken, you can reset the stored paper size using the about:config preferences editor.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box that appears above the list, type or paste '''paper''' and pause while the list is filtered
(3) Look for your printer's paper-related settings and then right-click and choose Reset for each (e.g., size, height, width, etc.).
If you return to your document and try Print Preview, does Firefox compute the correct size?
More troubleshooting suggestions: [[Fix printing problems in Firefox]]

Just installed Firefox 4.....now cannot print a pdf document in FF 4 using either file-print or the printer icon. However, I can print by right click on pdf page and selecting print form drop down. Was printing fine with FF 3.X

using adobe 9.x would not print. Then loaded Adobe Reader 10.x still would not print. Can print Adobe images just fine outside of FF4.x I am about ready to remove FF4 and go back to FF3.x.
Has anyone else had this problem.
Am running Win Xp with all current updates.

I had the same issue and my of my friends.
The fix is easy. You need to remove and re-add your printers.
Do this by going to the Applications folder Utilities folder and opening up Printer Setup Utility
Then click on the printers you see click remove and add them again.
If its a network printer, I would write down the IP address. Otherwise you have to figure out what it is.
Cheers

My printer will not detect the alignment page and prints out poorly?

My printers scanner will not detect the alignment and prints our poorly? Help!

Please read this post then provide some details. What printer model? What operating system? Are black and color properly printing on the alignment page?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

When I try to print a web page, it will print about 2/3 of the page and the other 1/3 of the page on anothe sheet of paper

When trying to print a web page, about 2/3's of the page is printed of one sheet of paper and the other 1/3 is on another sheet of paper

See this:
[http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page]

HP 7450 Photosmart After Printing completes Printer cycles 1/2 page and gets fault

Similar Messages

Maybe you are looking for