HP 7510 printer compatibility issue

I have recently updated Reader and now i cannot connect to my HP 7510 printer. i can print using other programs OFFICE - WORD.. prints with no issues. ABOBE READER will not locate my printer - i have tried installing other versions of the reader, still no results. Please help.

I have just asked the "community" the same, or similar, question. I have an HP Photosmart 6520.When I go to "Print" a PDF downloaded from the internet, or even scanned, it just says "error" in my printer Q. But, this has been the case with three different printers, a Canon, a Xerox and now an HP, and three different Macs, one a lapotop. I have NEVER been able to print out a PDF.

Similar Messages

Printer Compatibility Issue with PDF?

I have a PDF document someone else created with InDesign CS3 5.0.4. It opens in Reader 9.1.3 and prints perfectly on some newer printers. However on older printers the very bottom of the document is chopped off in both print preview and the actual print on paper. Both printers are HP and I spent a couple hours chatting with HP Tech Support trying new drivers, etc. Their conclusion was that it is caused by an unresolvable issue between the PDF and the older printer. They, of course, said I would need to buy new printers eventhough they are not that old and work just fine for everything else.
So far the same issue has come up in three other offices. There must be a better solution other than throwing money at it.
I have never used InDesign and I am wondering if there could be some settings used at the PDF creation in either InDesign or Acrobat that may solve the problem. The form must be printed exactly as designed so Shrink to Fit is not an option.
Thanks.

Thank you for answering so quickly!
I agree, and I am afraid the answer to this issue is to either buy new printers or redesign the form.
The PDF is a new state government form and I want to exhaust all other options before I get involved with the bureaucracy of inquiring about a change to the design of the form. (A stick in the eye sounds more fun.)
So from your expert knowledge of InDesign and PDFs there is no way, short of redesigning the form, to have it print correctly on "older" printers?
Thanks again.

Samsung Printer Firmware update information for iOS8 AirPrint compatibility issue

It has been noticed that there is a compatibility issues on some of the Samsung network printers while printing from iOS8 devices using AirPrint.
In order to resolve this compatibility issue with iOS8, new firmware for printer has been released.
Issue Case:
Printing using AirPrint from iPhone or iPad running Apple iOS 8.0 or later.
- Devices running version prior to iOS 8.0 or Mac OS X have no issues.
Details about affected printers and their fixed firmware versions.
Printers
Version with issue fixed
Samsung CLX-3300 Series
3.00.02.13 or later
Samsung C460 Series
3.00.02.13 or later
Samsung C470 Series
3.00.02.14 or later
Samsung M2020 Series
3.00.01.11 or later
Samsung M2070 Series
3.00.01.20 or later
Samsung M262x 282x Series
3.00.01.25 or later
Samsung M267x 287x Series
3.00.01.27 or later
Samsung SCX-3400 Series
3.00.02.05 or later
Please update your printer with the latest firmware as mentioned in the table above.
To update the firmware kindly follow the procedure mentioned below.
Search for your printer model on the link below
http://www.samsung.com/us/support/supportMain.do
Download the firmware.
Run the downloaded file and follow the instruction provided on the installation screen.
PS. During firmware update do not power off or unplug power cord of your printer. Doing so may make your printer unusable.
Moreover if in case non-compliant toner is used, it may cause error after firmware is updated.
We apologize for any inconvenience caused. We will try our best to provide best service and customer experience.
Thank you,
Samsung AirPrint support

Doesn't work .

How can I get the Microsoft enhanced Point and Print compatibility driver installed on Win7 LC master?

We recently migrated from a Windows Server 2003 to Windows Server 2012 print server. When recomposing a linked clone pool with the old 2003 server, drivers were taken care of for the printer when the user printed for the first time after desktop recompose. With 2012, any printer using the Point and Print driver doesn't seem to obtain the driver again from the 2012 server. All of our clients are running Windows 7 which means the Microsoft enhanced Point and Print compatibility driver is not installed in the OS natively.
I apparently need to figure out a way to get this installed on the host image so it trickles down to snapshots when recomposing the linked clone pool but I haven't been able to dig much information on doing this. Does anyone out there have any insight on how to accomplish this? If I recompose a pool now for a user who is using a new Point and Print driver, they get the following message that is resolved by removing the printer from their account and re-adding it:
"The 'Microsoft enhanced Point and Print compatibility driver' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
I figured the easy solution would be to just install a printer using the Point and Print driver and then remove it...leaving the driver behind (unless it cleaned up after itself). The problem with this is in my testing, even after removing and re-adding a printer that set off installation of this Point and Print driver on the client, any other printer that was using it still required the remove/re-add process in order to work, else I got the same message. That tells me that the driver may be custom for each printer installed?
Color me a little confused. I do NOT like the way that Server 2012 handles printers. I've come across a few other issues as well (such as duplex capabilities not being remember on the print server for a printer) that I never had with the 2003 server.
Thanks!!

I was able to get it to work using your instructions off of here and your other thread
Thank you!
Chris
http://social.technet.microsoft.com/Forums/en-US/864553c2-c8ff-49d2-bd48-eb7b47381111/windows-2012-print-server-problem-with-xp-clients?prof=required

OS 10.4.11 and HP Officejet 4500 compatibility issue (scanning)

Hi there,
I am having a compatibility issue with a G4 (OS 10.4.11) and a HP Officejet 4500 (all-in-one).
(Sorry if this is a little long, but there are many specs and many attempts listed here).
Problem: I cannot scan from the computer (upon opening HP Scan, a Browser Device window pops up, asking to "Choose a scanning device" the model is not listed, and it continues to search for a device but cannot find it) or from the scanner control panel to the computer (I tried selecting Open in HP Scan and Open in Preview from the panel –it then says on the panel "Starting scanning" but it doesn't scan even though the power button flashes (it then reverts to date and time), and the program it's opening in on the computer just seems to hang).
Still, some functions work fine:
- I can print from the computer to the printer (it recognizes the printer)
- The HP fax test seemed to run fine (via computer)
- As a stand-alone device (without the computer), I can photocopy in B&W and color –so there doesn't seem to be anything wrong with the scanner itself.
Here are the specs:
Computer specs:
- PowerPC G4, 933 MHz, 512 MB SDRAM, running OS 10.4.11 (no Intel Core processor)
(the hard drive is partitioned into 3 –one runs 10.4.11 (the others Jaguar and OS9 –for compatiblity with other programs/peripherals) –21GB space remaining on 10.4.11 partition
All-in-One specs:
- HP Officejet 4500 G510g-m (USB, not wireless) all-in-one (printer/scanner/fax/copier) with USB 2.0 high-speed A-B printer cable (says in literature and on box it is compatible with the G4 running OS 10.4.11, 256 MB RAM, 500 MB HD)
I contacted HP Tech Support. They suggested the following which were tried and failed to work:
- shutting everything down and restarting (many times)
- they checked to see if there was any update to the HP software –there didn't appear to be
- plug power cord directly into wall outlet
- switch to USB 2.0 cable (from 1.0)
- unplugging and replugging the USB 2.0 cable
- plug USB directly into the G4
- turning off the firewall (under System Preferences - Sharing)
- "scrub" or complete uninstall of all HP software (twice)
- search and removal of files via system and user libraries pertaining to HP (and some Epson files)
- verify and repair permissions (twice)
- reinstall of HP software (twice, second time after scrub/uninstall and verify/repair permissions)
- Software Update (via Apple menu) –only found Java 1.3.1 and 1.4.2 Release 2 (version 2.0) which they suggested might fix the problem –I downloaded and installed them, and then J2SE 5.0 Release 4 (version 4.0) which I downloaded but could not install (error message)
I then contacted Apple Tech Support and they said to go to support.apple.com and do a manual search for "HP 4500" –I did not find any drivers.
[I did previously have an Epson CX 4600 all-in-one which scanned fine with a USB 1.0 cable, even after the printheads had clogged shut –and I had had a HP Officejet J4580 which worked fine (which was for a family member) –this software would've been removed with the current HP installs and scrubs]
I am on the verge of returning this –it has also gotten several very bad reviews on the Apple site (for the wireless), however, I may have trouble finding a compatible device, as one running 10.4 is getting hard to find (unless I buy used, then no warranty and potentially other problems).
If anyone knows of any drivers or has any other information as to why this is not working, I would be most grateful (BTW, I am not much of a tech guy, so please bear with me).
Thanks.
Frazzled Macuser

Hey @Greenise,
Welcome to the HP Support Forums!
I would like to assist you today in getting the proper Full Feature Software and Driver package to install your HP Officejet 4500 Desktop All-in-One printer on your Mac OS X 10.4.11 Operating System.
Below is the link for the Full Feature Software and Driver Installer. Simply click on the link and select the 'Download' button in the top left hand corner. Once the download is complete just run through the on screen instructions to install your printer.
HP Officejet Full Feature Software and Driver (Universal) - Mac OS X 10.4,10.5 and 10.6.
Please let me know if this installer works for you and if you have any other questions. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Compatability issues with Windows 7

I have been trying to print out some event tickets from an email attachment and am being told that there is a compatability issues between that latest Adobe acrobat and Windows 7. I have been directed to this website for solutions.

Hi,
Are you Adobe Acrobat or Adobe Acrobat Reader to view the tickets?
Did you try saving the attachments to your desktop and initiating a print?
Thanks

Printer Compatibility

I find that I cannot connect my new notebook (G62-435DX) to my old printer (Dell Phote Printer 720) due to compatibility issues related to 64 v. 32 bit. Is there any way to overcome this or do I just need to get a new printer? I've tried the Dell website but not helpful
This question was solved.
View Solution.

This is a real issue in the somewhat rare case where there is no driver available. If your version of Windows 7 is Professional or Ultimate you can install "Windows XP mode" which allows you to use any device for which there is an XP driver; i.e. almost anything. I use XP Mode myself so I can still work with an older scanner which has no Windows 7 64 bit driver.

Adobe Acrobat 8 Standard compatibility issues with Office 2007 and Windows 7

I just updated my platform to Windows 7 and upgraded from Microsoft Office 2003 to Microsoft Office 2007. The PDF printer did not download and realized that there are compatibility issues with Office 2007. How could I get this fixed?

Buy Acrobat 11.

I was wondering how come my Acrobat 6.0 Professional Standard before I had no problem now when I use it it states the program has compatibility issues, I have windows 7 what can I do..it was working before

I am looking for help in correcting this issue... I had no problem before using my Acrobat 6.0 professional to create word documents to pdf...now when I go to use it there seems to be a problem
it states that the program has compatibility issues with window 7
can anyone help please.

To expand on this, the PDF creation aspect of Acrobat had to be updated to deal with changes in the Windows spooling system (for the Adobe PDF PostScript printer driver instance) as well as to support 64-bit versions of Windows.
- Dov

Are there compatibility issues with 1st gen I pad and new wireless printers?

Need to replace HP printer being used with 1st Gen I Pad. Are there any compatibility issues with new wireless printers?

Hello jxroads,
Welcome to the Apple Support Communities!
I understand that you are going to replace your printer and would like more information on what printers are supported for AirPrint. The attached article has a list of AirPrint printers currently supported for iOS devices.
About AirPrint - Apple Support
Cheers,
Joe

After a network interruption, my photosmart 7510 prints pages with a "d" on them.

After a network interruption, my Photosmart 7510 prints pages with a "d" on them. I have Windows 7. There is no error message on my computer. When I check "See What's Printing," nothing is shown.

Hi rosegirlmom,
Does this only happen when the router is reset?
Why is the router getting reset?
Have you tired using a different router to see if this stops the issue?
Restore Network Defaults:
On the printer control panel, touch the Wireless icon ( ).
Touch Settings .
Touch and then slide your finger up on the display to scroll to Restore Network Defaults .
Touch Restore Network Defaults .
Touch Yes to confirm your selection.
Restart the printer, and then connect it back to your network.
You may need to run the Update IP address icon located in the HP folder in All Programs to update the computers with the new IP address assigned to the printer.
Let me know what happens?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Installing Acrobat Standard 6.0 under Windows 8 & Microsoft Office 2013 - compatability issues

In older Windows/Office versions, a PDF Printer was integrated into software, such as Word. this would allow you to print directly into Acrobat in PDF format.
Under Windows 8 Office 2013 there seem to be compatability issues and I can not longer print to Acrobat.
Are there any patches or solutions out there ??

i'm a fan of doPDF: www.dopdf.com
which allows any app with print capabilities to print a pdf document.

Enhanced Point & Print compatibility driver in Windows 7

Hi all,
are admin permission needed to install the enhanced Point & Print compatibility driver in Windows 7? The print server is running Windows 2012R2 and the driver type for the printer is V4.
When a user (non admin) tries to add that printer, a dialog box pops up and asks for trust. Is this the default behaviour?
Many thanks!
Nils

Hi Nils,
Would you please let me know whether add a network printer via
Add a printer wizard, then encounter the issue (ask for trust)? Or do any other operation? Just a confirmation, thanks for your understanding.
Please also refer to following articles and check if can help you.
Printer Sharing Technical Details
Configure Print and Document Services
Assign Delegated Print Administrator and Printer
Permission Settings in Windows Server 2012
If anything I misunderstand or any update, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Elements 4 Compatibility issue with Vista

Everything was fine 'till my old faithful pc, and Windows XP, went belly up. Now the new pc, with Vista won't allow the complete Elements program to operate. I'm told, "This program has known compatibility issues". If the issues are known, can someone please tell me how to resolve the issue. I can't seem to find any answer. I'm operating on a Hewlett Packard - HPw1707, and have an HP Photosmart C6270 all-in-one printer. 465 GB capacity. I'd really like to be able to work with Elements 4 and hope for help. Thanks

What exactly the problem is?
Is this printer not accessible through PSE4 or what?
+ Ripple

Canon pixma mx922 compatibility issues with Mavericks?

Thinking of getting canon pixma mx922. Any body had compatibility issues with Mavericks?

Go to http://support.apple.com/kb/HT3669 for a list of printers that are still supported.
If you don't see the printer, check Printer software no longer available through Software Update.

HP 7510 printer compatibility issue

Similar Messages

Maybe you are looking for