HP 7525 e-all in one unable to see wireless network

I just purchased the HP 7525 and it does not see my wireless network. I have a Cisco E3000. I have been through some other posts to make sure I have settings that are compatible.
I am set to mixed mode (wireless B/G/N) although I have also tried just straight B. I am broadcasting my SSID. My security is WPA2 personal (although I have also tried turning it off with no luck).  I do not use any MACaddress filtering.
All other wireless devices (phones, tablets, laptops) I own have no problem detecting the network.

According to this post it does support WPA2.
http://h30434.www3.hp.com/t5/Printer-All-in-One-In​stall-Setup/WPA2-and-7250c/td-p/3328953
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

  • HP Officejet 4620 All-in-One Loses Connection to Wireless Network When It Goes Into Sleep Mode

    My HP 4620 All-In-One wireless printer works fine until it goes into sleep mode.  Once it goes into sleep mode, it doesn't wake up if a print job is sent to it.  If I wake it up manually by pressing the blinking on/off button, it still doesn't print.  If I completely turn it off and then on again, the print job that was queued on my computer will start printing, but that's a huge pain and waste of time nearly every time I want to print.  I've installed all available updates.  I also assigned a static IP address in an effort to correct this but nothing helps.  I see that others have complained about this problem, but I do not see that anyone has had success resolving this.  My operating system is Windows Vista.  I use a Link-Sys Wireless G Router.  Thanks.
    This question was solved.
    View Solution.

    so I have called HP tech support 12 times over the last 6 weeks and still my HP Officejet 4620 loses connection overnight. Of course becasue it was a birthday present I spent more time than I normally would have on this issue. While the tech are very polite they have not fixed my problem and now it is too late to return printer to store. This is a lot of money wasted and I think they need to admit this is a bug in this printer and resolve the problem!!!!!

  • Getting HP Officejet 5600 All-in-One to print from wireless network?

    I have the printer, via  USB cable, hooked up to my desktop. I have both my desktop and my wife's notebook hooked up to our wireless network via Cisco Linksys WUSB600N USB adapters. Using Cisco Linksys WRT610N router. The Best Buy sales person said as long as I had the printer hooked up to my desktop and my desktop was on or in sleep mode that we could print from my wife's notebook. I have added the printer driver to the notebook. Now I cannot even get a test sheet to print using my wife's notebook. The printer still prints from my desktop. Do I have to hook the printer up to the router via USB cable to get this to work or what?  This wireless thing is still a bit new to me. Any help, suggestions and/or answers will be greatly appreciated. I eagerly await your helpful replies. Thanks!

    I know I'm likely bumping an old topic...but hopefully this will help someone else.
    This *is* possible.
    The best way is to enable sharing on the primary (desktop computer that sleeps.) computer after installing it properly on the desktop. Find out the IP address that your modem has assigned to this computer, save it!
    Then, on the laptop, go into the "run" menu and type in the IP address of your desktop, starting with "\\."
    (So, if your IP is, 123.456.7.890. You would type into the run box of your laptop, "\\123.456.7.890" without the quotes.)
    At this point, you may be prompted for a username and password on your laptop. Simply put in any username and password that you have on the desktop when you first start the desktop up. (If a menu requesting username and password does not appear, simply move on.) I would advise you to check the box labeled "Save this information."
    At this point a new window should appear, it will show all network resources available to you on the desktop. If you've shared the files properly on the desktop, the printer should be showing in this menu. Simply double-click on the printer that you wish to use, and voila! Your laptop should install all of the required drivers and be connected. Be forewarned, your printer must connect directly through to the desktop computer. DO NOT have the printer connect through a USB hub before it reaches the desktop, this may cause communication issues later on.
    There's really a bunch of guides out there on this type thing, but you do have to search for them. I hope that I managed to help you and anyone else out there that's wondering the same but can't drop money on a printer that's brand new.
    (Lastly...if it doesn't want to print. Restart both the desktop and printer. Most of the time that fixes it.)

  • I have a HP 3055 all in one attached to a wireless print server. I got in working on one laptop Win7

    I have a HPa  3055 all in one attached to a wireless print server that works with one Dell laptop that I upgraded from XP. But I can't get a New Toshiba Win7 to work wireless, but only with cable.

    Do you have a wireless router?  How is the print server configured with that?
    On the Win7 machine, download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
    What does it say?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • My ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

    my ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • NOT PRINTING FROM WINDOWS 7 TO MY PHOTOSMART c7180 ALL-IN-ONE (I CAN SEE MESSAGES IN QUEUE)?

    CANNOT PRINTING FROM WINDOWS 7 TO MY PHOTOSMART c7180 ALL-IN-ONE (I CAN SEE MESSAGES IN QUEUE)?

    Hi,
    I think you need to remove the queue. Please try:
        hold down the Windows key and press R.
        from the Run window, type services.msc and hit enter.
        if the machine asks for Admin you have to accept this,
        look down to the print spooler service, right click it and select properties
        click on the Stop button,
        browse to C:\Windows\System32\Spool\printers
        delete the job inside this folder
        reboot the machine
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP PSC 1610 All-In-One doesn't see that paper is loaded

    HP PSC 1610 All-In-One doesn't see that paper is loaded and keeps asking me to load paper and press OK. I have done that per manual with no success. What's going on?
    I am using an Intel MacBook running SnowLeopard

    OK, I think this was among a series of "recalled" (years ago) printers where the feed rollers would become coated with a very slick substance that was outgassing from the rubber.  There was a cleaning kit made for this but I am not sure it is still available.  Instructions for it are here.
    It the absence of the kit, you can clean the rollers manually by removing the rear door and scrubbing the three rollers with Scotchbrite.  Red was used in the kit, but green may be aggressive enough to do the job.  You may have to fiddle with the printer to clean the entire circumference of the three rollers.  Once you do this, you will be good to go for years to come!
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I unable to see my network messages after upgrading to ios6 on my iphone4,can anyone help me for this issue?

    I unable to see my network messages after upgrading to ios6 on my iphone4,can anyone help me for this issue?

    Try to perform SMC and PRAM resets:
    http://support.apple.com/kb/HT3964
    http://support.apple.com/kb/ht1379
    Then try a safe boot:
    http://support.apple.com/kb/HT1564
    Ciao.

  • What would cause an IMAC to recognize one printer on a wireless network and not recognize another printer?

    What would cause an IMAC to recognize one printer on a wireless network and not another printer?  I have a smaller HP and a an HP 4600.  The computer recognizes the smaller printer but not the bigger printer even though the printer in Settings and shows up on Settings, but I cannot print to it. 

    Do you have a printer driver installed for it? When you open the Print dialog have you selected it from the Printer dropdown menu at the top of the dialog?
    Do you know that the printer is working and is properly installed (Added?)

  • Photosmart 7525 All in One - Unable to Scan to Computer

    Unable to "Enable Scan to Computer"
    I've downloaded the most recent downloads and drivers.
    Running Yosemite 10.10.1 on Mac
    WiFi connection confirmed
    HP Utility - Photosmart 7520 series > Scan to Computer > "Scan to Computer Cannot Be Enabled"

    Hi @sarahxtemp,
    Looks like we may need to try a different uninstall approach and see if this gives us the Scan to Computer option.
    Move the files and/or folders to the trash, drag and drop
    Macintosh HD/Applications//Hewlett-Packard folder
    Macintosh HD/Library/Application Support/ - delete all files and folders regarding HP/Hewlett Packard
    In Macintosh HD/Library/Caches - delete all files and folders regarding HP/Hewlett Packard
    Macintosh HD/Library/Documentation/Help/ - delete all files and folders regarding HP/Hewlett Packard
    Macintosh HD/Library/Frameworks/HPServicesInterface.framework
    Macintosh HD/Library/Frameworks/HPSmartX.framework
    Macintosh HD/Library/Image Capture/TWAIN Data Sources/HP Scan Pro
    In Macintosh HD/Library/Image Capture/Scripts - delete all files and folders regarding HP/Hewlett Packard
    In Macintosh HD/Library/Preferences - delete all files and folders regarding HP/Hewlett Packard
    Move Macintosh HD/Library/Preferences/loginwindow.plist to the desktop. NOTE: Not removing the file loginwindow.plist during the manual uninstall could cause the uninstall to be unsuccessful.
    In Macintosh HD/Library/Printer/hp - delete folder
    In Macintosh HD/Library/StartupItems, drag the following folders to the trash, HP IO and HP Trap Monitor
    In Macintosh HD/Users/USERNAME (this should have a symbol of a house next to it)/Library/Preferences, drag the following folders to the trash: *Any files beginning with com.apple.print, *Any files beginning with com.hp, *Any files beginning with Hewlett-Packard, *Any files beginning with HP or hp
    In MacintoshHD/Users/USERNAME/Library/Printers, drag any All-in-One printers listed here into the trash.
    Drag the HP icons from the Dock and drop it on an empty space on the desktop. The icon will disappear.
    Close all open windows.
    Restart.
    Empty the Trash.
     Follow these steps to remove the print driver and other software from a computer.
    From the computer desktop, double-click the Macintosh HD  icon.
    Double-click the Library folder.
    Double-click the Printers folder.
    Right-click the HP folder, and then select Move to Trash.
    When prompted, type the Administrator name and Password for the computer, and then clickOK. Wait for authentication to complete.
    Double-click the PPDs  folder.
    Double-click the Contents  folder.
    Double-click the Resources  folder.
    Locate your printer in the printer list, and then right-click on your printer and select Move to Trash.
    When prompted, type the Administrator name and Password for the computer, and then click OK. Wait for authentication to complete.
    Click the Trash icon on the taskbar, click the Empty  button, and then click OK to empty the trash.
    NOTEBy clicking OK, all items in your trash will be permanently deleted from your computer. To delete one item in the trash, click that item to highlight it, and then click OK.
    On the upper-left corner of the computer desktop, click the Apple menu icon, and then click System Preferences on the drop-down menu.
    Double-click Print & Scan.
    In the Printers list, click your HP printer, and then click the Minus button to delete it.
    Restart the computer again.
    After logging in, Repair Disk Permissions
    On the Dock, click  Applications, and then click Utilities.
    Double-click Disk Utility.
    Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
    Click the Repair Disk Permissions button at the bottom of the window.
    Once the repair is complete, restart the computer .
    Restart the computer.
    Install the software; HP Photosmart 7520 e-All-in-One Printer Full Feature Software and Drivers, once the software is successfully installed we can then delete the loginwindow.plist from the desktop.
    Download and install the HP Printer Drivers for OS X.
    **Source
    Please let me know if this resolves the issue.
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HP 7520 All in One "Unable to Communicate with Printer" msg

    We have a HP all in one Photosmart 7520 printer- it is USB connected to a mac (OS Snow Leopard I believe).  This was the original set up.  When I moved back here I was able to set up a wireless network with the mac as the host computer (connecting the modem to a Linksys router).  I was able to set up my windows 7 PC to this network and to the printer with no problems and was able to print to the printer for months.  Now I am getting this error "Unable to communicate with Printer"  and says it is unable to to be completed because the printer is unavailable or not connected.
    The printer IS connected and on.  My PC can see the printer listed in the control panel (I in fact uninstalled and reinstalled to see if that would fix the problem- it didn't).  The only thing that has changed since I originally set this up was that I added my second PC (Windows XP) to the network but I don't think that's the cause of my print job requests failing to print.
    I do know that the modem itself has been reset a couple of times due to the cable deciding to drop out a couple of times.  Could this be the reason why?
    What else can I look at to try to get my PC to communicate fully with the printer.  I've tried printing from googlemaps as well as a short notepad file.
    Thanks!
    This question was solved.
    View Solution.

    Let’s try this.
    1. Verify in the printer that 'Auto Off' is disabled.  Use the Embedded Web Server (EWS) by going to the  
        printers IP address in your browser, Settings Tab/Auto Off.  Or use the Printer Assistant, Printer Home
        Page (EWS).
    2. Set a static IP in the printer outside the DHCP range of the router. 
    In the router:
    3. Use a fixed wireless channel like 1,6 or 11, never 'auto', try channel 1 first then the rest. 
    4. Set router to 20Mhz only, or 145Mbps depending on router. 
    5. Always use WPA2-AES (Personal) encryption, but you can try ‘mixed’ mode. 
    6. For the routers security, disable WPS and never use it and disable UPnP so nobody can hack your
        system (if you want to know why, search the web). 
    7. If you have a dual band router (2.4Ghz and 5.0Ghz bands), make sure the SSID’s are NOT the same,
        they must be different for all bands, even for any Guest networks. 
    8. Save all settings.  Power off both, wait 5 mins.  Power on router wait 3 mins. 
    9. Power on printer and verify it reconnects to router. 
    Windows 7/8/8.1   Is Network Discovery on or off?
    Control Panel\Network and Internet\Network and Sharing Center\Advanced sharing settings.
    Under Home or Work (current profile) \ Network Discovery.
    Select "Turn on network discovery" and save changes.
    Now try.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • HP 5610 Officejet all in one unable to scan

    have misplaced the original installtion CD. have dowloaded from HP the complete program. I am able to print documents from pc, however, unable to scan as I have no ico or possibility to access the printer from PC.  My initial installtion had a page that came up that asked what you wanted to do, scan, print, copy or fax. This new installtion does not show this option. Have reinstalled several times but still no access to this control icon.  How can I get this back.?.   Thanks for any help, this has me bottle necked at the moment, as scanning is what I really need to be doing at the moment. Thanks again

    Hi @cedi,
    Welcome to the HP Forums!
    I understand that you are unable to scan with your HP Officejet 5610 on Windows 7. I am happy to help you with your scanning concerns!
    I would recommend this scanning guide, A 'No Scan Options' or 'Scan settings are not set' Message Displays for HP All-in-One Printers When ....
    Hope this resolves your issue!  
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Brother all in one unable to scan

    I have a new Macbook Pro running 10.8.1 and a 3 year old Brother MFC 7840W. I can print wirelessly without problems, but I am now unable to scan (I was able to previously with my older Mac running 10.7 using Preview). The Mac recognizes the scanner and proceeds to scan the document, but the scanned image is not saved to the desktop (where I told it to save), or anywhere else.
    I've tried using Preview, then Image Capture to scan, and tried downloading the most recent drivers from Brother's website, to no avail.
    Any thoughts?

    Yes kieveb but have you tried using  the "Image Capture" application that came with your computer?
    I have an Epson all-in-one but the "Image Capture" application does a better job on scanning.
    Make sure your AIO is turned on, then fire up the "Image Capture" application. It should be able to "see" your scanner.
    Also make sure that you have set Image Capture to save your scanned images to somewhere where you can see them (I use the Desktop)
    Then take it from there.

  • I have an HP Photosmart C7250 All-in-one - Test Report - The wireless radio is not functioning

    I have an HP Photosmart C7250 All-in-one and the wireless feature does not work.  When I try to go through the Wireless Setup WIzard, the Test Report indicates the following - "The wireless radio is not functioning.  Contact HP Support".  Can you help me?

    Let's reset the printer.  Turn it off, hold the # and 6 keys while turning it back on.  Go to Setup > Network > Wireless Network Test afterward to see if it worked.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HP all in one C309a: Error message: Wireless Radio is not functioning. Contact HP support

    Today all of a sudden, a 2 year old HP Photosmart C309a All-in-One printer is not longer connecting to my local Wireless Home Network. There is no change to network configuration to the TLink 3000 hub that I was using. All other clients (Mac OX, Vista, Ubunta 11.1, various versions of iOS and Android Icecream Sandwich) have no problem connecting to the same hub. No change to the network configure on the Printer. The machine have been standing as a stand alone machine and connected wirelessly to the network since day one in the corner of my office. Its within range of my router. I ran Wireless Network Test report to see what's going on. The title says "The Wireless Radio is not functioning. Contact HP Support" . Any number of reboot cycle didn't help. Out of frustration, I press "reset back to Factory Setting" on the printer. I did that, and then press "Wireless Network Wizard", and it was on "Searching for Wireless Router" forever... What opinions do I have? Get a new printer? or use good old 10-base T network cable to hook up the machine?

    My HP C309a had exactly the same problem.  Everything I found on the internet said that the printer could not be fixed and the only solution was to buy a new printer. The printer report said the wireless radio was not functioning. A factory reset did not fix the problem either. I had a problem with my HP Pavilion dv6000 laptop with the video graphics IC.  The solution for that fix was to do a solder reflow of the graphics IC.  Did it and fixed the problem. I figured maybe the same fix would work on my printer as I didn't have anything to lose at this point.  I located and removed the wireless radio board in the printer (on the left side upper right corner). I then did a solder reflow on BOTH sides of the board. I put the board back into the printer and wa-la, it connected immediately to the network. It has been functioning with no problems now for at least four weeks now (knock on wood). Hope this helps.

Maybe you are looking for