HP 7800 show green light and got off every 5 second

HP 7800 small form factor - this morining i powered on my system it show red flash light and got off. I replaced the power supply problem was solved it dosen;t show red light but now it show green ligt for 5 sec and restarted , i have unlug all cables and plug them in but all invain. Please help me out .

Hello @rana-minhas,
I understand that after replacing your power supply on your HP Compaq dc7800 Small Form Factor PC it will not power up properly and shows a green light for 5 seconds before restarting. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Business PCs - Compaq, Elite, Pro.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

TS3276 Help - Mail is not sending or receiving any e-mails . Connectivity Doctor is showing green lights.Have rebooted but same issue - just a circle continually going around the Sent mailbox and 2 e-mails waiting in Outbox.

Help - Mail is not sending or receiving any e-mails . Connectivity Doctor is showing green lights.Have rebooted but same issue - just a circle continually going around the Sent mailbox and 2 e-mails waiting in Outbox.

Is your web browser working normally?

Plssss help i beg all of u after hard reset my iphone got stuck with an apple symbol i thought it will get on and now the battery got empty and pressing power on button it switch on showing red battery and gets off and also its not connecting to my l

Re: plssss help i beg all of u after hard reset my iphone got stuck with an apple symbol i thought it will get on and now the battery got empty and pressing power on button it switch on showing red battery and gets off and also its not connecting to my la
its not connecting y?i think its software got corrupted,i think i should charge it first with a battery charger and when apple logo appears i should connect with pc,but i dont know how 2 open the back cover and how 2 remove the battery,i phone battery is removable or not?i mean it is fiz or wot?

Recharge. Reset. Restore.

My MacBook is plugged in with a green light and shows it's plugged in, but is not charging. When it's unplugged, it dies. It was charging last time I used it but not any more. I am no computer whiz and need detailed info on what to do Thanks.

My MacBook is plugged in with a green light and shows it's plugged in, but is not charging. When it's unplugged, it dies. It was charging last time I used it but not any more. I am no computer whiz and need detailed info on what to do Thanks.

The model 2,1 MacBook has an easily removable battery. You can get a new third party battery fairly cheap on eBay. Every MacBook from 2006 through Mid 2009 except the Late 2008 Aluminum Unibody and the Late 2009 and 2010 White Unibodies use the same A1185 battery.
Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
Or for $129 from The Apple Store http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY
Removing the battery:
Shut down the computer. Disconnect any cords connected to the computer.
Turn the computer over.
Locate the battery latch on one side of the battery.
Use a coin to turn the latch a quarter-turn clockwise. The battery should pop up slightly.
Lift the battery out.
Installing the battery:
Place the right side of the battery into the battery compartment at an angle, as shown below.
Gently press the left side of the battery down until it sits flat.
While holding the battery down, use a coin to turn the latch a quarter-turn counter-clockwise. The battery should lock into place.
Note: Keep in mind that once the new battery is inserted, you will need to press the power button to start up the computer.

My ipod shuffle 2nd gen suddenly stops playing music after 15-20 mins.First it flashes green light and then flashes red light rapidly. Any solution to this ?

My ipod shuffle 2nd gen suddenly stops playing music after 15-20 mins.First it flashes green light and then flashes red light rapidly. Any solution to this ?

A 2nd gen shuffle is about six year old at this point. The likely cause is a battery that is worn out, with greatly reduced capacity or inability to hold a charge. The initial green light shows a good charge. The red light means the battery is drained.
Since the shuffle still appears in iTunes, you can try doing a Restore in case the cause is related to corrupted software on the shuffle. The Restore button is on the shuffle's Settings screen in iTunes. This will erase the shuffle, re-install its software, and set it to default settings.
Also, when the light becomes red and the shuffle stops playing, try turning OFF the shuffle for at least ten seconds. Then, turn it back ON. This resets the shuffle. Does it play again? If it does, let it play until it no longer plays again. Repeat turning it OFF and ON until it no longer plays. Then, connect it to power and charge it to full. See if that makes any difference.
If that does not help, the solution is to replace the battery. If you have a repair shop do it, the cost is probably uneconomical, compared to the cost of a brand new 4th gen shuffle ($50) that has more features, and a new set of headphones, plus a one-year warranty.
If you are good at such things, this web site has repair guides
http://www.ifixit.com/Device/iPod_Shuffle

HT2693 I purchased Huawei Dongle and trying to connect with my NEW MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support. When I plugged in my the power is flowing in dongle due green light blinking twice in every 3 sec but no

Hi,
I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
So please suggest proper direction to use it and provide link to install any driver.
Thanks
Tauheed Ahmad

Yes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and 3.0 knowledge. They handsUp that reason I posted my problem in this forum.
So is there any better solution to use any mediator between these USB version handling, Please let me know.
Thanks
Tauheed

How to bind the user-defined watch to a specific server so that server's Health would show green ball and is linked to Monitoring watch?

Hi,
I create a user defined watch for BI4.1 ExplorerExplorationServer server in CMC -> Monitoring.
Caution:
node.ExplorerExplorationServer$'Server Running State'==1 ||
node.ExplorerExplorationServer$'Server Running State'==2 ||
node.ExplorerExplorationServer$'Server Running State'==4 ||
node.ExplorerExplorationServer$'Server Running State'==6 ||
node.ExplorerExplorationServer$'Server Running State'==7 ||
node.ExplorerExplorationServer$'Health State'==1
Danger:
node.ExplorerExplorationServer$'Server Running State'==0 ||
node.ExplorerExplorationServer$'Server Running State'==5 ||
node.ExplorerExplorationServer$'Health State'==0
However, in CMC -> Servers -> Explorer Services, the ExplorerExplorationServer shows "Information is not available" blue ball in Health.
How do I bind the user-defined watch to a specific server so that server's Health would show green ball and is linked to Monitoring watch?
Regards,
Jin-Chong

Hello JinChong,
We had created User-defined Explorer watches on our environments and have run into issues.
Have received many false alerts even though Explorer servers are running fine.
After creating an AGS case it was informed to us that Explorer does not have monitoring capabilities.
AGS is checking with solution architect of Explorer application about when the monitoring watches for explorer would be included.
Regards,
Rohit

My canon sx120IS continues to show low batter and shuts off even after changing the batteries.

My canon sx120 is continues to show low battery and shuts off even after changing the batteries. Any suggestions? Do I need to send it for repair somewhere, and if so, where?

Hi LB!
Thank you for posting on our forum!
Try cleaning the electrical contacts on the camera and the batteries using a soft microfiber cleaning cloth. If the same warning still displays, then the camera will need to be serviced. To start the repair process, you'll need to complete a Repair Request on our website.
If the camera is more than a year old, you may participate in the Canon Loyalty Program instead. The Canon Loyalty Program option allows you to replace your current camera for a discounted fee, plus shipping. The original non-functioning camera would then be returned to Canon USA for recycling using a prepaid shipping label that would be provided.
If you would like to take part in this option, please call our Sales Department at (800) OK CANON (800-652-2666) seven days a week, 8am to Midnight. Let them know you have been working with online support and the Canon Loyalty Program was offered. Be sure to have your serial number for your camera at the time of your call.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

My Macbook pro when plugged in will hold a green light and not be recognized by the computer to charge. SMC reset done several times. Any help?

Our MBP bought earlier this year when plugged in to charge will hold a green light and not be recognized by the computer as charging. Sometimes if we turn it around or plug it in multiple times will work. We have reset the SMC several times and will work for a little while then go back to the same problem. Any help or ideas on how to fix it would be great.

Hi Why must I,
I'm sorry to hear you are having charging issues with your MacBook Pro. It sounds like you have been on the right track in troubleshooting this issue; SMC resets are often an appropriate step for battery or power issues. If this issue persists, you may find the additional troubleshooting steps outlined in the following articles helpful:
Mac notebooks: All about batteries - Apple Support
OS X Mavericks: If your battery won’t charge
Note: If you reach the last step in the second article and it looks like you may need to have your MacBook Pro serviced, you may find this page useful:
Apple - Support - Service Answer Center
Regards,
- Brenden

HT3205 Green light flashing on and off every second

What is indicated by the green light on the charger going off and on every second?

Usually it is a charger or battery issue.
Try a SMC reset:
http://support.apple.com/kb/HT396
Use the method which applies to your Mac, a battery you should remove (most likely)
You can also check the battery status by clicking on the Apple logo and About This Mac, More info or system profile (depending on which oSX you are using as it is not in your profile) Power in the left side bar and check battery health and other stats.

Just moved and Time Capsule shows green light but does not connect to internet?

Help! I just moved and am trying to set up my wifi network unsuccessfully. I know the Internet is working as I can get online if I plug the computer directly into the modem via Ethernet cable. I've tried disconnecting and powering down everything, reconnecting modem and Time Capsule, then turning on modem, Time Capsule, then computer, with several minutes in between. Now I have a green light on the Time Capsule but in AirPort Utility it shows and amber light for Internet and says the connection is "Disconnected".
All my software is up to date. What do you think???

Modem.. what modem.. what kind of internet??
Open the utility and check the TC wan address??
If it is cable modem it can take 15min or more for the IP to reset.
Is the cable modem also a router??

Can't get camera green light to turn off !

Hello,
I hope this is the right forum to post this question, if not sorry and please direct me if you can to the correct area.
I have an 08 Macbook. Never had a problem with it since it's barely a year old. One thing I have noticed is that my camera's green light is ALWAYS on. I never run any apps that would use the camera, I have gone back made sure they were all closed, made sure that nothing was to open automatically in startup that would cause it to turn on as well. Yet it continues to persist. The strange thing is that when I open Photobooth the screen is black! I have no idea why this is happening.
I did some quick googling and the only way I can get it to turn off is to start my computer by doing command option p r.
Does anyone know why this is happening and how I can make it stop once and for all? I don't want my camera being on all the time and it freaks me out that there are no apps using it!
Thanks

Hi EZ Jim,
I would consider iGlasses first.
Back ground app launched at Start Up but not listed in System Preferences > Accounts > Login items and available to all apps that can access the camera including a Web Browser.
Have not tried it Safari 4 and that Favourite pages bit that might hold Mebeam of Googlemail Chat page in the History.
The Screen Saver might be a bit of a stretch.
I am presuming that 1) he might have one and 2) it is not releasing the camera when not doing Screen Saving.
I am also presuming it might have a faulty idle time that makes the OS think the Screen Saver should be in view or possibly the time is set so short regular input is the only thing stopping the screen Saver from showing.
I am not sure many people would regard it as "an App" as such either, hence my phrasing.
The Nanny Cam stuff may be an app.
I have Evocam of the two we regularly mention and it can be hidden (Or set to Hide on using red Button).
That might need me to presume the computer is not shut down that often as it does not have an Option to add it to Login items on my Leopard Computer.
Whilst Hidden though, it can continue to stream.
This one was the furthest stretch.
So I thinks some are possibles.
Nanny cam is the most unlikely but depends on the app involved settings.
As part of the specs do suggest security then we have to consider some with access to the computer might look in the most obvious places first to see what was running, DOCK Login Items (I am not sure the Screen Saver I tried could push/stream/record or alert by email if movement was seen) but seeing Screen Saver set in System Preferences may not (should not) tell you that info.
(Says he dragging nanny cam stuff back into the picture )
Off to bed for me with so much Think Different stuff going on.
Catch you soon.
10:35 PM Friday; January 8, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
I Think I got away with it. What you you think ? .

Won't turn on, shows green light

So last night I was playing with my phone, using up the battery, then it notified me that the battery was low. I stopped using it and just turned the display off and put it in my pocket. I went to my room and I tried to turn the display on, it didn't work. I assumed it died so I plugged it into the WALL charger. It showed the green LED light on the top of the phone, but it still wouldn't turn on. I then just went to bed and let it charge ALL NIGHT. I woke up to see the Motorola symbol on, and it was booting. Then I went back to sleep. Then I woke up later and it was the same as before, it wouldn't turn on, and the green light showed when you plug it in.
I've tried leaving the battery out for a few mins, taking the battery and SD card out and putting them back in, I've tried just letting it charge, nothing is working.
Also when I plug it into the computer via USB, it shows the green light as well, but the computer doesn't even notice it's plugged in. The computer doesn't respond to it being plugged in what so ever.
I also did some re-search before posting this! Looking at forums where people at the SAME problem, and none of their solutions are working...

ncyankee23 wrote:
I just received my third Droid X today. I returned the first one after a month because of the blank screen/green flashing light issue. I had the 1st replacement for a week and a half before the camera wouldnt load and the bottom half of my screen went out...started flickering at first, then completely blank but still functional. Just got my 2nd replacement Droid X today, put in sd card and battery and back to the old black screen and green flashing light. I am absolutely livid as I use this phone for my business. I will be taking it in to the store tonight and I wont leave with a Droid X. I expect some sort of reparations.
I take it they never replaced your battery or charger?
Black screen and green light usually goes right along with charging issues. Are you using the cable and wall charger that came with your device? If it is an issue with the charging cable I would have them replace it and the battery.
As for getting your device changed, if you are out of your 30 day no questions asked period, it's not going to happen without you forking out more $$. People usually get mad when I write this, but it's the truth.

MacBook Pro power adapter doesn't show green light when fully charged

I've had a quick search through the communities and there are a lot of posts about chargers and indicator lights, but I'm not sure I'm really satisfied about my own issue so I thought I'd ask anyway.
Basically, I bought a spare power adapter (genuine Apple 85W MagSafe2) for my new 15" Retina MacBook Pro in a store the other day, to save me lugging my main adapter to and from work all the time.
Using it for the first time made me realise that the adapter I got with my MBP behaves slightly differently re: the LED indicators. The new one from the store shows amber until the MBP is fully charged, then solid green once fully charged. This I believe is perfectly normal.
The charger I got with the MBP shows amber whilst charging, but only shows green very briefly when fully charged and then the indicator goes out completely. OSX (10.8.2) still indicates that it is connected to the power source though, and the battery doesn't drain or anything at this point - it definitely appears to be functioning as expected.
Aside from this, I can determine no real difference between the two adapters in terms of charging speed or general functionality, they both appear fine.
I just wondered if anyone else had ever seen this?
I did reset the MBP's SMC settings too, but it made no difference. I'm inclined to think there isn't an issue with the laptop itself since the new adapter's indicators work exactly as I'd expect, but then again the original adapter seems to function perfectly so I'm wondering if there's just some trivial issue with the green LEDs or something like that.

Really doesn't matter if anyone else has or has not seen something like what you have. Your original adapter is faulty in one way or another and you should take it in to Apple with your rMBP to show them what is happening and Ask Nicely for a new one that works correctly.

Airport Express shows green light but NO Internet

I am using a Macbook Pro and an Airport Express for my Wi-Fi.
I have recently changed my Internet Service Provider. The new ISP provided me with the following information:
1.IP address: 172.100.11.17
2. Subnet mask: 255.255.255.0
3. Default Gateway:172.100.11.1
4. Preferred DNS: 172.16.0.1
5. Alternate DNS: 8.8.8.8
My ISP told me to enter this information manually unlike my previous ISP who used DHCP.
I entered this information by going to system preferences >> Network >> Advanced >> TCP/IP >> Configure IPv4: Using Manually. I also entered the preferred and alternate DNS information under DNS servers in DNS tab.
I applied these settings and the airport express shows solid green light but gives NO access to internet.
I have also tried connecting the Ethernet cable directly to the computer, which also shows connected but gives NO access to Internet.
I borrowed another router from my friend (not apple) and entered the same settings given by my new ISP and boom !!! I got connected to the internet only through wirelessly BUT no connection again using the ethernet.
So I am facing the following problem in Mac OS X (10.7.5)
using
Airport Express: NO internet
Ethernet: NO internet
Other Router(non-apple): Internet works using Wi-fi
Ethernet: NO internet
I do not know if something is blocking the connection or what is happening. I have created new locations (under network) and deleted the old existing one's but nothing seems to help. I also did a hard reset of my Airport Express but nothing seems to help.
Please help me !!!

I am using a Macbook Pro and an Airport Express for my Wi-Fi.
I have recently changed my Internet Service Provider. The new ISP provided me with the following information:
1.IP address: 172.100.11.17
2. Subnet mask: 255.255.255.0
3. Default Gateway:172.100.11.1
4. Preferred DNS: 172.16.0.1
5. Alternate DNS: 8.8.8.8
I am able to connect to the internet now directly using ethernet cable but my airport express wouldn't let me connect.
I must be doing something wrong with entering settings in Airport Express. The ISP technician is as clueless as me and had even did some changes under Wi-Fi in the network section on my macbook pro. I dont know if it is causing these problems. I have a few questions, please help.
Q1. While entering the ISP provided details using Airport Utility, which of these should I choose: A. Static B. DHCP C. PPPoE ?
Q2. Should my MAC address in the Airport Utility be set to configure manually or automatically ?
Q3. What should be my Wi-Fi settings in my computer ?. I mean in system preferences under network, should my TCP/IP set as DHCP or manually ? Under hardware tab, there is an option to select MAC address as either Automatically or Manually. What should it be ?
Please Help !!!

HP 7800 show green light and got off every 5 second

Similar Messages

Maybe you are looking for