HP 8000 elite small form driver PCI\VEN_8086&DEV_2E17&CC_0700

Please help!
I need drivers for HP 8000 elite small form factor
win 7 64
PCI\VEN_8086&DEV_2E17&CC_0700
thank you

Hi:
You need this driver...
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=4065895&sp...

Similar Messages

BIOS Doesn't work and BSOD in Windows - HP 8000 Elite small form factor

I cannot open the bios settings of my pc, used windows 7 and windows 8.
POST screen says F10 but that doesnt work, when i press it it boots Windows.
I also checked all other F keys but no result.
Also when i am in windows i get BSOD, and everytime an other error code. (Windows 8 and Windows 7)
Memory check, HDD check are all passed. I also removed all other dirves and disk drive.
Does somone know a solution or is my bioschip broken?
Thanks!

Hi,
You might get better assistance on the HP Enterprise Business Forum since you have a business class PC.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Random, excruciatingly slow load time with 7900 Elite small form factor desktops

Hi all, I have approx 300 HP 7900 Elite small form factor machines in my environment that were deployed just over two years ago. from the time of deployment we have experienced on about 50 occasions a random, excruciatingly slow load time that take about one hour for the user to login and open their programs. there has been no rhyme or reason for it, different floors, areas of the building, etc. I searched the forum for similar probs and didn't see one like this, I hope I'm not duplicating efforts from someone else's question... One thing we have noticed is that if we re-boot while it is going through the start-up process, it seems to "make it angry" and will lengthen the overall load time. We use the 32-bit Vista Enterprise OS. This is with a "stock" build, that is to say, our standard corporate build. our security policy does not allow users to install software, by the way. Thanks so much if you can help!

Hi,
How is the issue going? Usually, this error can be caused by missing third-party NIC driver. To solve the issue, we can download the missing network
driver and update the WDS boot image to include it.
In addition to the article provided by Chris, the following blog can also be referred to as reference.
http://askmetricks.blogspot.in/2013/03/solvedwdsclient-error-occurred-while.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this
information.
Best regards,
Frank Shen

LAN Driver PCI\VEN_8086&DEV_153A

Hi,
Happy new year to all!
I'm looking for some drivers, like the LAN one for my Elite 800 on Win XP 32bit : PCI\VEN_8086&DEV_153A
I have no choice of the OS...
Where can I find it and how install it?
Thank you!
Dahlia
This question was solved.
View Solution.

Hi:
I would use this file. DL but don't run it.
http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5404560&swItemId=vc_116115_1&swEnvOid=405...
Then download and install this free file utility.
http://www.7-zip.org/
After you install 7-zip right click on the network driver file and select 7-zip from the menu. Have 7-zip Extract to: and let it extract the files to the folder name for easy identification.
Once you do that, you will see a Driver folder and the next folder below that E1D, then open that and find WIN7-32.
So, from the update driver prompt manually browse to: the folder 7-zip created\E1D\WIN7-32\E1D6232 and select the Intel(R) Ethernet Connection I217-LM from the list and see if the driver installs.
The folder labeled E1C only has XP drivers for the older ethernet adapters (I already looked).

HP dc 7600 small form PC - max HDD size?

Hi! What is the max. size of SATA HDD I can use in my HP dc7600 Small Form Factor Desktop PC?Thnx!

Please find the requested information as shown below: Hard Drive Controller (PCI) Support : Serial ATA (support for SATA 1.5-Gb/s and 3.0-Gb/s hard drives Hard Drive Interfaces Supported : 2 Serial ATA interfaces Harddrive size information : Hope this helps, for any further queries reply to the post and feel free to join us again **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84Although I am an HP employee, I am speaking for myself and not for HP

How to update firmware for HP Compaq DC small form factor

I have HP Compaq dc7700 small form factor, Windows xp pro. It was bought on ebay and works fine except for one thing. The Bios was upgraded but the firmware is not upgrading. the Bios was upgraded to V3.05 but the firmware remains 2.04
I downloaded al the updates and firmware and followed instructions but I seem to have problems updating the firmware. I would like to know how to do this step by step because the instructions I read seems to be missing some steps. my question is how to update the firmware. I did read the instructions but could not get it updated. either updating via windows or in dos, I can't seem to make it successful. There are two error messages,
1. ME BIOS Extension module has halted. Update BIOS or Management Engine firmware if problem persists.
2. Amt mamagement engine is disabled.

HP normally uses the term BIOS to refer to motherboard/CPU "firmware" updates and Firmware to refer to other device "firmware" updates... Below is a list of the two classes of firmware;
BIOS
Business Desktops BIOS Utilities 4.02 Rev. A
Microcode Update for HP 786E BIOS Family Computers with Intel Processors 1.06 Rev. A
HP Compaq Business Desktop ME Firmware Update and Utilities 2.2.30.1046 Rev. A
HP Compaq dc7700p Business Desktop System BIOS for Intel vPro Technology (786E1 BIOS) 3.05 Rev. A
HP Compaq Business Desktop System BIOS (786E1 BIOS) 1.15 Rev. A
Firmware
Western Digital 7200-rpm Hard Drive Firmware Update 3.03E03 Rev. A
Intel PRO/1000 Firmware 1.10 Rev. A
HP Optical Drive (TSST H353B DVD-ROM) Firmware Update BC08 Rev. A
HP Optical Drive (TSST H653N DVD-RW) Firmware Update HB02 Rev. A
Seagate Hard Drive Firmware Upgrade for 500-GB Barracuda 7200.11 HP13 Rev. A
ATI X1600XT Graphics Card Video BIOS Update S3A67124.104 Rev. A
Samsung Hard Drive Firmware Upgrade - SATA Drives 42_51 Rev. A
Please identify the exact device you wish to upgrade/update the firmware to.
Frank
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Pci\ven_8086&dev_ 153a&subsys_05a41028&REV_04

Hi All,
I am trying to deploy windows 7 image using mdt. It worked fine on many machines. But when i tried to deploy on two new machines. it is causing an error
The following networking device did not have a driver installed.
pci\ven_8086&dev_ 153a&subsys_05a41028&REV_04
I tried to download the following driver and when i tried to import driver in the mdt, it says the driver already exist.
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3680&DwnldID=18713&ProductFamily=Ethernet+Components&ProductLine=Ethernet+Controllers&ProductProduct=Intel%C2%AE+Ethernet+Connection+I217-LM&lang=eng
please let me know when else needs to be checked.
Thank you so much for all your help.

The above device looks like an ethernet adapter. The issue may be that both of the platforms you are testing on may have different ethernet models (one might be a 10/100 and the other may be a 10/1000) in them which is causing the break.
I would start off by checking your Driver Injection task and ensure "Install all drivers assigned to the profile" is enabled and not selected as "Install only matching drivers..."
Resources:
Hardware specific targeting (driver installs)
Please remember to click “Mark as Answer” on the post that helps address your issue. This can be beneficial to other community members reading the thread.

Dual monitors HP Z200 Small Form Factor Workstation

I am waiting on my new Intel I-5 HP Z200 Small Form Factor Workstation running Windows 7. What do I need to run two monitors?  I believe that there is an HDMI and a DVI video output on the rear - can I run two monitors off of these two outputs or do I need a video card? If I buy a video card do I need one with two HDMI outputs (my preferred connection) or can I use the one on the motherboard and one on an add in card siumultaneously?

Hi,
For that card, with the right connectors and adaptors you can connect to TWO minitors ( Drive up to two 30-inch (2560x1600) digital displays through native dual DisplayPort connectors on a low-profile card.):
    http://www.nvidia.com/object/nvs-310-graphics-card.html#pdpContent=2
Bau you can add an adapter such as:
     https://www.youtube.com/watch?v=ZkbaXkMQrIM
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Dekstop DC7800p Small Form Factor system

Hi,
I've got a dc7800 Small Form Factor system. It was working fine but after a reboot it won't start up normally anymore. The black POST screen appears, RAM testing starts to count up and then I see and error about "system options not set". After less than a second, a blue window in the middle of the screen displays the message "smart card authentication" and below that, "smart card reader not present".
From a bit of reading it seems like a BIOS problem but I can't figure out how to really reset the CMOS and get things working again. I've tried removing the CMOS jumper and booting the system, removing the power cord and CMOS battery for 10 minutes.
Is there a way to do one of the following:
- force the CMOS defaults to reset and remove the configuration that requires the smart card authentication?
- force a BIOS recovery, with a key combination or by using a different jumper or jumpers on the motherboard?
I see various other jumpers and pads on the motherboard like "ROM RCVRY" and the E15 Boot Block Recovery Header but scant information about how these might be used to solve the problem.
It seems to me that the hardware is fine as it powers up and displays the POST screen. It's like a BIOS setting has been reset to require a smart card, even though there isn't one, nor even a smart card reader, in the system.
Any advice would be greatly appreciated.

After doing some research on the message, I came across this post.
Apparently, your PC has a smart card optional system (maybe it was government surplus).
http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/DC7800-smart-card-athentication/m-p/10691...
Now, if you can get into the BIOS menus, if you look at the top of page 8, you will see what you need to do in order to enable/disable the smart card reader message.
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01162201/c01162201.pdf
Whatever the problem is, it is a security setting issue, and clearing the CMOS or updating the BIOS will not have any effect on that setting.
Unfortunately, I have no experience with the security settings or protect tools software on HP business PC's.
I have a dc7800 (and only use HP business desktops and notebooks), so I am very familiar with all the other aspects of the PC, but that one.
You may want to post your issue on the HP business support forum, business PC section. Hopefully someone there has experience with turning this feature on or off.
http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271#.Uk2rcJAo69I
You may also want to log in and reply to that post, but don't get your hopes up that it will be answered.
RichS hasn't replied to a post in 3 years. Although someone else may.
Good luck, and please post back if you find the solution to the problem.

Tecra S5 - Driver PCI-memorycontrol

I have installed the notebook Tecra S5 to Windows XP and installed all drivers but I'm missing 1 driver and that is the PCI memory controller (PCI\VEN_8086&DEV_444E&SUBSYS_444E8086&REV_01\4&22 7633DA&0&00E2)
Can someone help me with it?
Thanks,
Greetings Cemmy

PCI memory controller is Intel Turbo Memory also called Intel Flash cache logic chip, called also Robson device.
It is quite new technology designed to support new Vista capabilities.
There is no driver for it for Windows XP, because XP doesnt support the function.
This function is supported only by Vista.
So under XP just leave it unrecognized but it wont affects the system functionality.

HP Compaq 8000 Elite power supply upgarde

I have a 2010 HP Compaq 8000 Elite and need to upgrade the power supply in order to run my new Radeon HD 6850 Graphics card. After much research i found that this particular computer's motherboard does not have a normal 20-pin or 24-pin power supply but instead uses 2 separate 4-pin connections for the PWR and PWRCPU supplies and a third cable which i believe to be an ancient and outdated 6 pin auxiliary power cable (http://www.playtool.com/pages/psuconnectors/connectors.html#aux) for the PWRCMD supply. I Also found that all power is run through the motherboard to each separate piece of hardware in the computer and therefor most likely has a limit for the max power supply possible. Is there some sort of power supply that will both fit in the PSU slot (which is not the standard PSU size, but instead measures about 6" x 5.75" x 3.75") and will also be able to connect to and supply enough power to the mother board?!? Or am i stuck with a lousy 320W??? Please Help!!!
Service Map: (http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01944841/c01944841.pdf)
Similar Case: (http://h30434.www3.hp.com/t5/Desktop-Hardware/replacing-PSU-on-HP-COMPAQ-8000-ELITE-Convertible-Mini...)
This question was solved.
View Solution.

Maverickv2,
You will not be able to upgrade that PSU, model # 508154-001. It is not possible with those connectors. The most absurd item was that the hardware (drives) actually are powered off the motherboard. (Just like you said).
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Elite 8300 hard drive replace

I have a HP elite 8300 and the hard drive has gone bad so i bought a new hard drive that is bigger than the one that came with my system when it was new. I have all of the recovery disc but when i am using the recovery disc i get an error that says hard drive is not the same size as the orignal, how do i get my recovery disc to work? I really do not know what to do i keep getting the same error. Surely Hp does not what us to keep the same small hard drives in our systems when there are bigger hard drive available now.
Thanks
Jim

Where did you acquire the recovery disks?
If the new hard drive is an AF Format then the recovery disks may not work.
Restore your BIOS defaults, remove all external devices except the keyboard and mouse then try.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Owc mercury elite external hard drive will no longer come up on my desktop

owc mercury elite external hard drive will no longer come up on my desktop?

Can Disk Utility see it?

Time Machine backup created on Mac with a large hard disk. What happens when restore to MacBook Air with small SSD drive?

What if a Time Machine backup was created on a Mac with a large hard disk, e.g. 500GB iMac - and I buy a new MacBook Air with a small SSD hard disk e.g 128GB. What happens when I need to use the larger Time Machine file to set up the new MacBook Air? What happens to all those files that can't fit on the smaller SSD drive?

It is not the HD size, but rather the size of the data it contains. If you right-click your 500GB drive and select "Get Info" you can see how much is actually being used.
Naturally if you are using more space than the new drive has, then you have to make some choices about what you want to keep and what you want to keep archived.
I don't know what options are available but you may simply have to do a manual restore of files you want, in groups.

IPhoto Library Transfer to Smaller Hard Drive

Is it possible to only restore parts of an iPhoto library to a new Air from a Time Machine backup? I recently upgraded to a new Air that has a smaller hard drive size and can't handle all of my photos. Is there a way to transfer part of my photo library over with limited HD space?

You would have to restore the library to an external drive, then open it in iPhoto and delete what you don't want. Nothing is actually deleted until you empty the Trash in iPhoto. When the library is small enough, copy it to the internal drive.

HP 8000 elite small form driver PCI\VEN_8086&DEV_2E17&CC_0700

Similar Messages

Maybe you are looking for