HP 802 Black ink cartridge not compatible with HP Deskjet 1050 Printer - J410a [Model: CH346A].

I am Sharjil Ahmed from Kolkata, India, and had bought theHP Deskjet 1050 All-in-One Printer - J410a [Product Model: CH346A] from an online shopping website www.crazeal.com on 18 December, 2011, where the product information consisted that I will be provided HP 62 small black ink cartridge HP 62 small tri-color ink cartridge along with the product. However, the box consisted of HP 61 small black ink cartridge HP 61 small tri-color ink cartridge.
I also registered my product on 03 January, 2012, and found out that the ink cartridges which are compatible with my printer are HP 802 Black ink cartridge (CH563ZZ) and purchased the same, but when i tried to take a printout a message appeared that HP 802 Black ink cartridge is not compatible. Hence I had contacted the HP service centre of our area where I was informed that the cardridges compatible with my printer is HP 61 only and the hardware of my printer does not support HP 802.
Please help as I have not been able to find HP 61 anywhere in my locality.
[Personal Information Removed]
This question was solved.
View Solution.

Hi sharjilahmed,
The 802 cartridges are the correct ones for your region. If you purchased the printer from a Region other than India you will need to contact technical support, so they can assist you with getting the region changed on the printer. Contact numbers for India support below.
DeskJet, Inkjet All-in-One, Entry level LaserJet, LaserJet All-in-One:
1800 200 0047, 1800 425 7737,
0124 387 7300, 0124 234 0917
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

Black Ink Cartridge not working HP Photosmart 5510 series

I replaced my black ink cartridge in my HP Photosmart 5510 series printer and it doesn't print. I don't know how long I had the cartridge, so I went and bought a brand new cartridge and it still won't print. I did everything the help menu said and it still doesn't print. I cleaned print head and copper on both the cartridge and print head, I did an automatic cartridge clean and nothing is working. The printer recognizes that the cartridge is full---there are no error messages---but it won't print. I also replaced the three color cartridges and they print fine, but the black doesn't. Any help would be appreciated. My printer is fairly new, I haven't done a lot of printing with it and it was printing untill the black ran out and I had to replace the cartridge.

Hi, please see links below on cartridge changes
Change to electrical chip (new design has black dot)
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03154756
Black XL size
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&lang=en&docname=c02750681
Hope this helps
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Is mac air compatible with HP Deskjet 1050?

is mac air compatible with HP Deskjet 1050?

If it's a Deskjet 1050 -- J410 series, the answer is "yes".
Here's a good article about setting up your printer:
http://support.apple.com/kb/HT4670
The "yes" answer comes from the "printer and scanner software" link under the second "important ..." bullet in the article.

Black ink cartridge not working after replacing

I replaced the black ink cartridge on my HP Photosmart 6510 because the print was getting faded. Now the black will not print. I used an original HP replacement cartridge and inserted it according to specifications. I ran a test page and all colors printed except the black so I ran a printhead clean to no avail. I wet a paper towel and touched it to the ink and it is not dried up. Help!

It is definitely a hardware problem then. Try the steps in the document below. If that doesn't work, you will need to contact tech support. If you are still in warranty, HP may replace the printer at no cost to you. I'll link the information to get in touch with them below. The link will take you to a form to fill out. Once you fill it out and it is processed, it will give you the printers warranty information, a case number, and the phone number to call.
Black Ink is Missing on Printouts
HP Technical Support Case Call Form

New black ink cartridge not working

I have installed new ink cartridges and all the colour ones work but the black will not print out. Level of ink is fine, touching where the ink comes out is wet and black as is where it goes in on printer, but will not print out black at all only colours. Any ideas as to why?

Hi tagelbecky,
The post located here should help to resolve your issue.
Please let me know if I can be of any further help.
Many Thanks,
Francheska
Although I am an HP employee, I am speaking for myself and not for HP.

Why would a new 564 black ink cartridge not print?

New black ink cartrige. Installed like usual. Won't print. Always worked before. Any thoughts?

Good day to you @holb , welcome to the forums
I read about the black ink not printing for you.
If you would like to let me know which printer model you're working with and the OS you're running on your computer, I will certainly look into the troubleshooting guides for you.
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How Do I Find My Model Number?
Thank you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Black ink cartridge not working

My printer 3520 model, with cartridge 685 is not printing inspite of spending several hours doing various things. HP deskjet printers is a rejected case, as I suffer from heavy costs of printing and than this failure.. I have tried following: a. Tried printing from two laptopsb. Cleaned printer headc. Cleaned vent (actually it was good already, but still as guided)d. Attempted to print several copies of black and white, all of them came out white I have to take colour printout, which works. Cartridge is new. I am from India. Printer is more than a year old. Is there someone who can help with specific instructions and not generic steps written in help URLs with almost no affect.

busey33,
This article should help you get past the alignment failed if you are using the 6510 like the original poster. Give the steps a shot and let us know if it helps unless it is a different model number in which case let us know.
debiscrolls,
Could you help me with unique factors of your situation? Is this for the 6510 or a different printer? Are you able to print a test page? If so is black and any other color missing or streaked from the test?
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP 564 cartridges not compatible with my photosmart 5510

Hi,
I have a photosmart 5510 printer that I bought in Japan. It came with a set of 178 cartridges.
I moved to korea and bought a set of new HP 564 cartridges here because the 178 cartridges are not available in Korea. On the box of the cartridges it says that the cartridges are suitable for the photosmart 5510.
After installing I get an "incompatible cartridge" error.
If I use sureSupply via the HP utility to find compatible cartridges and I select Korea as my current location I get the following message:
You selected the following location: Korea
Is this your current location? We have detected that cartridges purchased in the location you have selected will not work with your printer. Common reasons for this include:
you bought your printer in another country
you bought your printer on the Internet from a supplier in another country.
your printer was provided by your employer who moved it from another country.
you selected the wrong location on this website.
Your printer can be reset to work in the location you have selected: Korea
Contact HP Support for more information on having your printer reset to work in this location.
Below that there is a link "Contact HP for product support" but if I click that I end up on the sureSupply page and I have to select my model and location. If I do that I see a list of 564 cartridges I can buy.
On the top of the page there is a "contact HP" link but that link (a javascript link) does not do anything (in safari on OSX).
How can I have my printer reset to work in Korea (with 564 cartridges)?
This question was solved.
View Solution.

@ JeroenKorea - If you bought the printer in one region and moved to a new region you need to call customer support to request a "Regionalization Reset". There should not be any charge for this; it is covered as part of the cartridge warranty. You will need to have access to your computer and printer while on the line with HP. You will also need to have a set of cartridges for the new region, once the reset is complete cartridges from the original region will no longer work.
Check out the following document about regionalization. I am sure that you have used this link already, but I want to provide again.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02558798
I used Google Translate on the page that banhien provided above in an attempt to help you find the number to call. For an inkjet/ all-in-one printer the number listed is 1588-3003, The hours of operation are: 9:00 a.m. to 6:00 p.m. (Mon-Fri), and 9:00 a.m. to 1:00 p.m. (Saturday), excluding public holidays. I hope that this helps
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Black ink cartridge not intended for use c6100

I have been printing on the C6100 all-in-one printer. Without making any changes to the cartridges, the message 'The following ink cartridge is not intended for use in this printer' has come up. How can I get rid of it?

The troubleshooting steps in the document here may help resolve the cartridge error on your Photosmart c6100 series printer.

After replacing black ink cartridge on photo smart 6500 won't print black

Photosmart 6500 all in one printer won't print after replacing the black cartridge. Everything worked fine prior.

elsob wrote:
It's photosmart 6510 & I 'm from the US.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Printer driver in Safari not compatible with Epson Artisan 730 printer

After being on the phone with Epson for 3 days, it seems as though Safari/Firefox/iMac is missing a driver for my Epson Artisan 730 printer. Does anyone know how to rectify this? The printer is brand new, operating with Lion and prints out gibberish, 30 pages at a time. Help!

First some people have had problems getting the printer drivers to update via software update, make sure you have the correct drivers as shown in this table.
http://support.apple.com/kb/ht3669
To see what driver you have go to System Preferences > Print and Scan > into the printer utility and under the general tab you'll see the driver version.
To force an update delete the old driver
https://discussions.apple.com/message/15947486#15947486
I just resolved a problem with our Epson Artisan 730 and print quality, turns out the USB drivers and WIFI drivers are VERY different and the USB drivers offer much better quality, more options in the print dialog for quality and color management.
If you already have the correct version of the drivers maybe a mac connected to the printer via USB can share the printer and then you can print with the USB driver. I know that's a pain since that's what we did before we got the 730 with WIFI.

My new laptop is not compatible with 6 years old printer. How do I download suitable driver?

New HP Laptop --HP Pavilion DV6-6147 TV Windows 7
how do I download driver to suit HP PSC2355 all in one and HP Deskjet f380 all in one?
[Personal Information Removed]

You can download the drivers for your printers from the following links on your notebook and install them:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4220...
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=1128296
Hope this helps!
Although I am an HP Employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

OS 10.6.8 upgrade not compatible with Canon iR8070 copier print engine

Upgraded my Intel iMac to OS 10.6.8 Snow Leopard, finally. I am networked to a Canon iR8070 printer/copier and everytime I print to this machine I pauses the job. Canon says that they no longer support this OS and I was wondering if anyone has found a workaround, generic print engine that may work so I don't have to pdf the file and take it to another printer to print?

Check out Gutenberg Printer drivers. You can find info at:
http://gimp-print.sourceforge.net/

SOLUTION: for printer wont print using black ink cartridge. ETC.

Black ink wont print in low resolution, you can't use high resolution if you selected plain paper. Choose "hp premium paper", even if you use cheap paper. Default Quality for this is "Best" but "Best" ONLY works IF you select a quality paper, such as "hp premium paper".
It's a software fault, there should be no option for plain paper for black only printing.
Hope this helps a few!
Andy

If HP Premium photo paper is selected the printer will print black using the color cartridges since pigmented black ink is not compatible with photo paper. The printer will print much more slowly in photo mode and will put more ink than is intended on the page.
If black is not printing when you print a nozzle pattern from the printer then likely there is an issue with the printhead or the ink delivery system between the ink supplies and the printhead.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Black ink cartridge broke

Hello,
I've just bought my new ink cartridge today and just refresh them all 4. Estimate ink level stand ok. Everything fine but there's one small problem. My black ink cartridge is not working.
Black ink didn't came out even i did 10 times print and test but still on screen said ok...How come?
Am getting mad already ..I've just paid around 30 euro with one broke ink cartridge and may have to pay for fixing my printer also because of warranty is already expired..
Any help is really welcome!
Thanks

Hi @Pjsmet,
Welcome to the HP Forums!
I noticed that your black ink is not working with your HP Photosmart B010A. I am sorry for your frustration, but I am happy to help!
Please take a look through this guide, Troubleshooting Print Quality Issues.
If the guide does not work, please try the steps in this post, Re: black ink not working, by @Bob_Headrick.
Otherwise, please call our phone support at 800-474-6836 for your upgrade options. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Best of luck!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP 802 Black ink cartridge not compatible with HP Deskjet 1050 Printer - J410a [Model: CH346A].

Similar Messages

Maybe you are looking for