Hp 8100 fuser error 50 service
If you change a fuser in the 8100 and the problem comes right back, still getting 50 service error. I found that the problem is the low voltage power supply, it is connected to the fuser and if just changing the furser doesn't work, this is the problem, the book will tell you dc controller, but it is definately the low voltage power supply, seems to be a common problem with 8100's. I've had this repair happen in the field on countless occasions.
This question was solved.
View Solution.
Hi lazrprnt,
When you get a 50 error on the 8100 it could be any of the three parts causing the problem. Note that the fuser is the first part that most commonly will cause the 50 error, and then the DC controller. The low voltage power supply usually is the last possible problem. Do you still have an issue with the printer having the 50 error message or have you gotten it taken care of?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
Similar Messages
-
HP Laserjet M2727nf Fuser error
I installed a HP Laserjet M2727nf printer on my HP LE1901w computer using windows 7 and it is always telling me fuser error when I want to print a document. I have to off and on it several times before it prints. What do I do?
Send it to the service for fuser replacement ... hint: ask for the price first ;-)
-
I receive the 50.7 fuser error message. We have followed the guidelines found in the blog. Plug directly into wall, unplug and wait 30 minutes, even waited 24 hours, etc.
When plugged back in error message disappears and we can print a few times and then error message reappears.it seems to print fine until the error message appears.
What can be done to fix this permanently?Hi @Swahealy ,
I see that you keep getting a fuser error. It will print a few times and then the error comes back again. I would be happy to help you.
This error message refers to the printer having experienced an internal hardware error.
This is probably the document you have already tried to resolve this issue. A 'Fuser Error' Displays on the Computer, and the Printer Does Not Print.
The only other information I could find for this fuser error, is after getting the error, to turn the printer turned Off for 3 mins and then turn it back ON to see if the printer will resume printing.
If the issue persists, unfortunately the printer will need to be serviced.
If you need further assistance, please let me know the following information.
What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
How is the printer connected? (USB/Ethernet/Wireless)
Please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Error publishing service in Service Registry
Hi experts.
I've configured Service Registry in a SAP PI 7.11. Everything seems to work correctly but I can't publish services there. When I try to publish from Directory or directly in Service Registry by wsdl I'm getting this error:
com.sap.aii.ib.core.uddi.RegistryClientException: Services registry is not available; for more information, see the log
at com.sap.aii.ib.server.uddi.RegistryClientDelegateProvider$EjbRegistryClient.publishPhysicalSystems(RegistryClientDelegateProvider.java:440)
at com.sap.aii.ibdir.server.wsquery.WSQUDDIPSPublishTB.execute(WSQUDDIPSPublishTB.java:91)
at com.sap.aii.ibdir.core.simulation.DefaultTaskBroker.execute(DefaultTaskBroker.java:171)
at com.sap.aii.ibdir.server.simulation.TaskQueryService.specialQuery(TaskQueryService.java:33)
at com.sap.aii.ib.server.query.SpecialQueryServiceProvider$SpecialQueryServiceImpl.specialQuery(SpecialQueryServiceProvider.java:63)
at com.sap.aii.ib.server.query.QueryServiceImpl.specialQuery(QueryServiceImpl.java:443)
at com.sap.aii.ib.server.query.QueryServiceBean.specialQuery(QueryServiceBean.java:112)
at sun.reflect.GeneratedMethodAccessor762.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:592)
at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
at $Proxy1646.specialQuery(Unknown Source)
at sun.reflect.GeneratedMethodAccessor761.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:592)
at com.sap.engine.services.rmi_p4.P4DynamicSkeleton.dispatch(P4DynamicSkeleton.java:234)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:362)
at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:69)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:67)
at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:41)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:977)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:57)
at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:55)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:327)
I think is a authorization problem but I have role to read and write in service registry. I can see this error in Service Registry Trace
Invalid Response code (401). Server [http://xxxxxx:50000/uddi/api/publish/] returned message [Unauthorized].
Any idea? Maybe the user you have to fill in Service Registry Configuration Wizard?
Regards
Edited by: Christian Abad Chico on Feb 20, 2012 1:00 PMHi,
It looks like you are missing some Services Registry preconfiguration. Please find a description how to configure the Services Registry under the SAP Help document below:
http://help.sap.com/saphelp_nwce711/helpdata/en/47/d391d7b8fc3c83e10000000a42189c/frameset.htm
There is also a wizard that you can use for this purpose:
http://help.sap.com/saphelp_nwce711/helpdata/en/f7/6182bd68434595ba5105a0a346efcc/frameset.htm
Hope this helps,
Greg -
Error on KEB0 execution ? = Program error: BI service API(component BC-BW)
Error on KEB0 execution ?
Iu2019m trying to create a data source on KEB0, but when I try to create, the system give this error:
u201CProgram error: BI service API (component BC-BW) terminated: MAPI
Message no. R8401u201D
Some one knows this message ?
Thanks !Marcus, have you checked following Note?
504847 - Termination when creating a CO-PA DataSource -
Hello,
I ran a new install of Team Foundation Server and let it install the built in SharePoint pieces on a single server setup. After the install i'm able to access the
http://teamfoundation:8080/tfs/ address without issue but am unable to create a project. When I attempt to create a project I get the following error:
TF30172: You do not have permission to create a new team project (when checking security i'm a member of the project collection administrators and Team Foundation Administrators)
This led me to look at the sharepoint central administration site where I receive the following error:
Error 503 Service Unavailable
I've gone through and validated the identity is set correctly in IIS for the following services:
SharePoint Central Admin v4
SharePoint15AppPool
The SharePoint Web Services Root is set as LocalService instead of the domain user.
The identity domain user is setup as local administrator on the Team Foundation Server. They are all set to use .net v4.0.30319 with integrated Pipeline mode.
Any help would be great!
Thanks!
EricHi Eric,
Thanks for your post.
Please share your detailed team project creation log here.
In your TFS Admin Console>>Extensions for SharePoint Products tab, ensure SharePoint Web Application shows correctly in the right panel. And go to TFS Admin Console>>Application Tier>>SharePoint Web Applications tab, ensure your SharePoint
web application displays in the right panel, then select your SharePoint web application and click Repair Connection, ensure can repair successfully.
In your IIS Manager, select your SharePoint Central Administration V4 site and click Browser:17012(http) in the right panel, check if your SharePoint Central site can be opened successfully or not. If your SharePoint Central site cannot be accessed, I think
this issue relate to your SharePoint site, you should contact SharePoint experts to resolve this issue first. After you resolved this issue and your SharePoint Central Admin site can be accessed correctly, then try to create your team project(within SharePoint
site) again, if there still has issue when creating team project, please share the detailed error message here, we will try to resolve it.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I was prompted to update itunes this evening. I did and in the process, it came up with the following error message: Service "apple mobile device" (apple mobile device) failed to start. Verify you have sufficient priviledges to start system services. I unistalled itunes completly and reinstalled but am still getting the same error message. If I click "ignore" the program will finish downloading but will not launch due to "not being installed correctly". Please help, I use this program alot with my first grade classroom and they're expecting their listening center in the morning.
Hey I finally got an older vesion of itunes to work!!! 10.7 x64 for windows 7
After uninstalling all apple products even quicktime
I had to delete everything from (program files, and program files x64, program data,)
And all downloads from apple, and I went in to search deleted other stuff from apple, and itunes
But definently not my itunes library and Playlist
Down loaded 10.7 x64 for windows 7, but checked (do not start when done)
Then I emptied my recycling bin and restarted my PC
I ran geek tech tool box same as reg cure pro, also PC Tools registry cleaner, and CC Cleaner
Then I emptied my recycling bin and restarted my PC
And wallah... It finally works, and I Love the older version anyways.
Easier to download and transfer music!!!!! -
Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open. I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank youHi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
Error 1920-Service 'Apple Mobile Device' failed to start.
Hi,
When ever I try to install the Apple Mobile Device Support this message shows up "Error 1920-Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services". I have uninstalled itunes multiple times. I have tried only installing the Apple Moblie Devuce Support by doing the extract file from WinRaff. Nothing has worked. Could you please help me? I'm getting relly frusturated with this whole thing. All I want to do is download songs on to my i-pod.
Thank You,
Aleida H.I guess the short answer is don't try to pass MSI properties to the installer.
I don't think this is anything your fellow users can help with, but you might want to file a report at Bug Reporter.
tt2 -
Initially iTunes would not run although it had been running quite well up until now. Suddenly received this error on PC start-up "The program can't start because MSVC80.dll is missing from your computer. Try reinstalling the program to fix this problem." Research on Net pointed me to iTunes as the issue. Tried to start iTunes and received that message again. Tried installing latest version of 64-bit iTunes and received the subject message part way through the install: Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."
iTunes has been running great on this PC for years. What's up?
RonSee Troubleshooting issues with iTunes for Windows updates.
tt2 -
When installing itunes on my windows XP I get an error message "Service Apple Mobile Device"
When installing iTunes on my Windows XP I get an error message "Service Apple Mobile Device (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services". I don't know what this means and I do not know how to resolve it. Can you advise please?
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.
iTunes 11.1.4 for Windows- Tips for Unable to install or open -
Send E-mail from Oracle (9.2.0.1) : SMTP transient error: 421 Service not a
I have used Oracle 9i server (9.2.0.1 version) on Windows XP machine(with SP2).I want to send Email from PL/SQL procedure.
My Question is what sort of configuration needed to perform this activity?
I have installed IIS (Internet Information Service)
in my machine, then configure my SMTP mail server
with a valid email id and password given TCP port 465.
Later I came to know that to send Email from PL/SQL I have to install Oracle JServer Code. Follow three steps. the steps are
1. Execute the script as sys "$ORACLE_HOME\javavm\install\initjvm.sql"
2. Execute the loadjava classfile as
$ORACLE_HOME\plsql\jlib>loadjava -f -v -r -u sys/**** plsql.jar
3. Execute the script as sys "$ORACLE_HOME\rdbms\admin\initplsj.sql"
I sucessfully executed the first step, but for the second step iam not able to locate the plsql.jar file in the specified path.
So Please tell me if there is any other method to perform this task
My code is as follows.
CREATE OR REPLACE PROCEDURE SEND_MAIL (
msg_to varchar2,
msg_subject varchar2,
msg_text varchar2
IS
c utl_smtp.connection;
rc integer;
msg_from varchar2(50) := '[email protected]';
mailhost VARCHAR2(30) := 'mail.google.com';
BEGIN
c := utl_smtp.open_connection(mailhost, 465);
utl_smtp.helo(c, mailhost);
utl_smtp.mail(c, msg_from);
utl_smtp.rcpt(c, msg_to);
dbms_output.put_line(' Start Sending data');
utl_smtp.data(c,'From: Oracle Database' || utl_tcp.crlf ||
'To: ' || msg_to || utl_tcp.crlf ||
'Subject: ' || msg_subject ||
utl_tcp.crlf || msg_text);
dbms_output.put_line(' Finish Sending data');
utl_smtp.quit(c);
EXCEPTION
WHEN UTL_SMTP.INVALID_OPERATION THEN
dbms_output.put_line(' Invalid Operation in Mail attempt using UTL_SMTP.');
WHEN UTL_SMTP.TRANSIENT_ERROR THEN
dbms_output.put_line(' Temporary e-mail issue - try again');
WHEN UTL_SMTP.PERMANENT_ERROR THEN
dbms_output.put_line(' Permanent Error Encountered.');
END;
Procedure Created.
SQL> execute prc_send_mail('[email protected]','[email protected]','Good Morning.');
BEGIN prc_send_mail('[email protected]','[email protected]','Good Morning.'); END;
ERROR at line 1:
ORA-29278: SMTP transient error: 421 Service not available
ORA-06512: at "SYS.UTL_SMTP", line 17
ORA-06512: at "SYS.UTL_SMTP", line 96
ORA-06512: at "SYS.UTL_SMTP", line 374
ORA-06512: at "SCOTT.PRC_SEND_MAIL", line 19
ORA-29278: SMTP transient error: 421 Service not available
ORA-06512: at line 1.
Please tell me how to solve this problem.
Thank You.1) Why did you install an SMTP server locally and then tell your code to try to use the server mail.google.com?
2) The error you're getting is from mail.google.com indicating that Google isn't running an open SMTP server there. I would be very surprised if Google were running a publicly available SMTP server anywhere since that would be an invitation for spammers.
Justin -
Error 503--Service Unavailable. Error while Test the webservice
Hi...
I created a webservice and deply it into a remote weblogic server. It deployed there and when I click on Test client, it shows this error.
Error 503--Service Unavailable
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.4 503 Service Unavailable
The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay may be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
How we can rectify this.
hope for a reply...
Resmi.Check the WLS server log files for a more detailed error (stacktrace).
Timo -
i have created my web-dynpro application in development. and sent to quality . whenever i will execute my dynpro in quality i got one message
ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)
whenever i saw sicf transaction my web-dynpro is not seen . my dynpro application name is more then 15 character. what i will do . please give me valuable suggestion.....Hi Ashok,
for your requirement the application is not exist in particular place. It means, the webdynpro application is saved at different package or different location.
Please change the webdynpro component name and save it in particular request in package, then transport it to quality ..(development server )
then go to SICF t.code .. sap->bc->webdynpro->sap->find out your application and activate the service of your webdynpro application.
Now test it ... this solution might helpful to you .
Regards,
Naveen M -
Hi
I am facing one error in Service desk related to message text .
Some of the characters of message entered by the customer is getting truncated when we see the message details in the transaction data tab in the service desk. Due to this we are not getting the full description of the support message.
Is any note is available for this?
Best regards
SarangHi
Please find the reply in Bold :
What Sol Man release are you workin on?
SAP Solution Manager 4.0
What kind of characters get truncated?
General message characters (English alphabets)... is this because of length constraint?
Are you working on a unicode system?
Yes
Does this happen while creating messages from a satellite system or from within Sol Man?
When user creates messge in SAP ECC 6.0 , then the sme of the last characters of each row gets truncated.
Best regards
Sarang
Maybe you are looking for
-
Is there any way to contact verizon with a detailed cell phone technical support question?
Is there any way to contact Verizon with a detailed cell phone technical support question? I prefer e-mail so as to provide details (like I am trying to provide here). I have tried in-store personnel (no help at all) and the web chat - they just wa
-
I forgot my password for my ipad
HI, I forgot the my passowrd for my ipad and it is disabled. How can I reset password.
-
Transfer old admin to new name-name change
I recently have gotten divorced and changed my name-my old name holds unpleqsant memories for me.Is there a way to change the name on my current admin account while retaining all my program settings etc.? Or is there another way to do this?thank you
-
Cant boot with memory in duel mode!!!!
For some reason my computer will now longer boot up with memory in the duel mode and OCing the system. I keep getting a timing error. Tried several different timings all giving me the same thing or it locks once windows opens. Runs fine OC'd in singl
-
Gradients using black print very dark
I created a number of documents using pages in pages 06, which I now use with pages 09. My problem is that gradients using black print much darker than they did before, indeed so dark they are unusable. The gradients are generally made up of black an