HP 8150N Printer still not working with Snow Leopard

I went to the Hewlett Packard page for a new driver and was told the new driver for my printer was included in the Snow Leopard update. I'm sure it is, but my computer can't find the printer. I've used advice from other discussions and tried what I could with the "Print & Fax" feature on my computer, but so far, nothing works. The printer to a network with two other computers in my office. Any suggestions would be helpful. Thanks in advance.

I believe this to be a "generic" statement since the support agent did not know what your problem was. I have double checked, and there are no known issues with the driver for the 8150n (at least none that engineering has been informed of and is working on).
I fully believe the problem you are experiencing is due to the lack of AppleTalk in Snow Leopard.
First print out the IP address of your printer by printing the configuration page. You may also be able to get this information on the front panel if you dig.
Second, open up the print and fax control panel and click the + button to add a printer. In the add printer window that opens, select the IP button at the top, choose the protocol of HP JetDirect - Socket, and then type the IP address of the printer. If the OS automatically selects the right printer driver (and not Generic PostScript) you are good to go. Click Add Printer and happy printing.
If it doesn't auto select the right printer then your printer probably does not have an IP address that is routable from the Mac. The easiest way to get the printer to grab a new IP address is to cold reset it. Cold Reset the printer by powering it down and then powering it back up while holding down the GO button.
This should force the printer to grab a new IP address. Follow the above steps again to add the printer, and away you'll go.
One drawback of this method is if you have a network that keeps changing and a DHCP server that doesn't reserve IP addresses for devices it is possible that the printer at some point in the future updates its IP address and is no longer reachable. If this happens, simply repeat the steps and you'll be all set. The other alternative is to assign a static IP address to your printer, but that takes a bit more work.
Just trying to help.
Andrew

Similar Messages

  • Capture 4 still not working with snow leopard

    despite the update from capture 4, it still crashes and wipes your settings with snow leopard.
    Anyone know when they may update to fix or a workaround?

    HI,
    If you can find an associated preference file that might help.
    Quit Capture4 if it's running.
    Locate this file. com.capture4.plist (The wording might be slightly different). Perhaps Nikon in the name also.
    ~/Library/Preferences.
    Move that file to the Trash and see if that helps.
    We have no way of knowing when the next update will come out nor what it might contain.
    Try repairing disk permissions.
    Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
    Carolyn

  • HP Photosmart C6300 printer/scanner not working after Snow Leopard install

    HP Photosmart C6300 printer/scanner not working after Snow Leopard install
    Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

    Keith,
    I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

  • Are mobile internet USB devices still not working on Snow Leopard?

    Are mobile internet USB devices still not working on Snow Leopard? I actually had to go back to my previous operating system to get this to work. I would however prefer to use Snow Leopard...if Apple & HUAWEI have finally got their act together!

    There appears to be a problem with drivers for USB wireless modems with 10.6. I upgraded from Leopard to Snow Leopard and now can't connect to the internet with my wireless modem. I hope Apple sort this out soon. Or maybe it's Huawei that needs to put a 10.6 driver into its software.

  • HT3258 help!....i have macbook with lion 10.5.8 op because protools does not work with snow leopard, now i bought "traktor" which does not work with old op sys, can´t find a suitable update anywhere, what to do ? pete

    help!....i have macbook with lion 10.5.8 op because protools does not work with snow leopard, now i bought "traktor" which does not work with old op sys, can´t find a suitable update anywhere, what to do ? pete

    According to Roaring Apps, there is a version of Protools compatible with Lion.  But you may need Snow Leopard 10.6.8 to buy either Lion or ML on MAS.   It looks like you need to get up-to-date with your OS and the apps too.
    http://roaringapps.com/apps:table/tags/_t/index_tags/_t/p/2
    http://roaringapps.com/apps:table/tags/_p/index_tags/_p/p/3

  • My XP printer no longer works with snow leopard over the network

    My XP networked printer (Samsung 4200) no longer works with snow leopard after Mac update.  Printer hooked up to XP and can access it through network.
    When I print it requests that I to authenticate the printer with a user name and password but it's not password protected. I don't have a password, but I tried all the usuals anyways. 
    It worked fine a couple days ago, and I've tried everything since.  I've reset my printers, turned off both computers.  Plugged the printer directly into the Mac - didn't work at first but downloaded a new driver Splix - 2 (Samsung doesn't make an OS X driver for this printer) and got it working.  Reinstalled Bonjour on the PC, which can't even see a printer now.  Any help would be hugely appreciated.
    THanks in advance.

    helpthismacuser wrote:
    When I print it requests that I to authenticate the printer with a user name and password but it's not password protected. I don't have a password, but I tried all the usuals anyways. 
    Connecting from a Mac to Windows is password protected. If you tried to connect to a shared folder on Windows you would also be prompted to enter your Windows credentials. So when you do print next time, enter your Windows user details and password. If XP has no password then set one - it is bad practise to have a Windows computer without a password. And updates to Mac OS X expect you to have one set in the Windows computer.
    If for some reason you don't want to set a password in XP then enable the Guest account and you can use this on the Mac when you get the prompt (either select Guest or type it in).

  • HP LaserJet P1005 not working with Snow Leopard

    Has anyone managed to get this printer to work with Snow Leopard 10.6? I have installed the latest drivers* from the HP website which BTW do not say they support 10.6 , see http://is.gd/2DfcE
    *Not sure exactly what the version number of the drivers is. The website says they are version 1.0.7, but when installed they show version 1.0.6
    I either get nothing coming out of the printer or an error "PrintJobMgr quit unexpectedly - This report will be sent to Apple automatically".

    From this web page:
    Here are some troubleshooting steps you can use if there is an issue:
    Ensure the printer is connected, has power, has ink / toner, paper, and no alerts on its built-in display.
    Network based printers should be on the same subnet; you shouldn't have to worry about this if your printer is on your home network.
    Use Software Update for the latest available updates.
    Delete the affected printer from Printer & Fax System Preferences, then re-add the printer.
    If the issue persists, reset printing system as described below, then re-add the printer.
    If the issue persists, contact the printer vendor and/or visit their website for printer software and support.

  • M-Audio MIDISPORT UNO USB Not Working With Snow Leopard

    My Snow Leopard installation worked fine except until I plugged in my MacBook to my Casio Privia with the M=Audio MIDISPORT UNO USB cable to run GarageBand. I'm getting a MIDI error which states it can't work with the latest operating system. It doesn't surprise me though for all the software and hardware driver updates that have to catch up to such a new OSX 10.6. I went to the M-Audio site to download the latest driver, but the drivers only were compatible with OSX10.5.8.
    This is an alert at the site
    Mac OS X 10.6 Snow Leopard Support Coming Soon
    Avid/M-Audio working closely with Apple to offer support for OS X 10.6
    Avid/M-Audio is pleased to hear that Apple has released Mac OS X 10.6 Snow Leopard. We’ve been working closely with Apple to bring Snow Leopard support to the M-Audio® product line, as well as the Pro Tools® product line and extended product families. We ask that all existing Mac users please wait to upgrade until we officially announce Snow Leopard support. Stay tuned for more information in the coming weeks.
    This is a bit of a concern, because I need to get GarageBand running again with the MIDI hook ups. Is there a work around anyone knows about to get MIDI working with Snow Leopard.
    Thanks Steve

    I ran into a similar problem. I discovered one thing which may help you out though. It works OK with my Yamaha P200 keyboard but it does not work with my Yamaha NP30 keyboard. I looked at the MIDI stream and the only difference seems to be that the NP30 sends a continuous stream of MIDI clock, whereas the P200 does not. My theory is that this clock stream is somehow confusing the driver. I can't seem to disable the MIDI clock on my NP30 but if your Privia has the ability to disable MIDI clock, then it may be worth a try as it will probably fix the problem until they come out with the proper drivers.

  • Canon MP620 print driver does not work with Snow Leopard

    Bought a Macbook & bundled Canon MP620 printer in Dec 08. Two days ago upgraded to Snow Leopard, and I can no longer print (the printer is not recognized), it only sees "Bonjour scanner" (the printer is a multi-function printer, copier, fax, scanner). Spent more than two hours with two different Apple tech support people over the phone; talked to Apple personnel in store. My printer is connected via Ethernet cable to a wireless modem, and I connect to the wireless modem via Airport. The phone tech person insisted that this printer is supported by Snow Leopard, but we reloaded the print driver from the Snow Leopard installation disk with no results. Finally my last resort, which worked, is to go to Radio Shack and get a cable that has a USB-A (printer) to USB-B (Mac) attachment. I was able to print. It is unacceptable for Apple to have this problem, as I went into the store four different times to discuss whether I should upgrade to Snow Leopard, and was told on every occasion that Snow Leopard will make everything run faster, more smoothy, etc. NOT! I want Apple to post a notice on their web site to a) confirm their print driver problems with Snow Leopard and b) to confirm WHEN new print drivers will be released.

    Have a look at my last posting re Canon network printing.
    http://discussions.apple.com/thread.jspa?threadID=2128186&tstart=0&messageID=100 97438#10097438
    i got my MP980 working via Ethernet and wireless. The same procedure should work for your MP620.
    Pahu

  • Novatel Wireless Merlin X950D not working with Snow Leopard

    I've just upgraded my MacBook Pro to Snow Leopard and my Merlin X950D 3G broadband card has stopped working.
    When I insert the card sometimes it's detected but won't connect, sometimes it's detected but only after being inserted for some time (5 mins or longer) and still won't connect, other times it's just not being detected at all.
    I've tried on a clean install of Snow Leopard using the built-in WWAN drivers and I've also tried with Novatel's drivers. In both cases I've tried booting Snow Leopard in 32 and 64 bit modes. Can't think what else to do; has anyone got any ideas?

    I found a solution.
    Download the older Novatel drivers (2.2.3) from this site:
    http://www.nvtl.com/index.php?option=com_content&view=article&id=174:macosxtiger -novatelevdo&catid=42:mac-installation-i
    After a reboot, your modem will work fine. Something in the 3.0 drivers is incompatible with Snow Leopard.

  • Printer won't work with Snow Leopard

    Hello,
    I have been using a Lexmark colour printer with my iMac. I upgraded to Snow Leopard and since then my printer does not work. Does anyone have a solution to this as I don't really want to buy another printer, especially as I have bought a new stock or print cartridges for the printer.
    Many thanks to anyone who can help.
    Kind regard, Maggi

    Hello Maggi:
    This is a list of OS X supported printer drivers:
    http://support.apple.com/kb/HT3669#lexmark
    Since you did not indicate your specific printer model, I cannot make further suggestions.
    If your printer is not listed, some people have had success with generic Gutenberg drivers.
    Barry

  • Canon pixma IP4000R will not work with Snow Leopard

    After upgrading to Snow Leopard, my Canon IP4000r printer will not work. I have tried both the Canon Printer Drivers 2.3 (my printer is listed) from Apple and the latest printer driver from Canon. There are multiple problems ... the first thing I noticed is that not all of the printer options are available on the print dialog. When I tried to print, I got "fatal::internal error -9660."
    It looks like both drivers I've tried so far are CUPS (which is probably why all of the printer options are not supported).
    Anyone have any ideas? Other than buying a new printer ...
    nojp.co.canon.bj.print.PrintSettings.BJThrougoutPage..b. media=na-letter PaperInfoIsSuggested..b. pserrorhandler-requested=standard sides=one-sided job-uuid=urn:uuid:f3c1ff27-c401-385e-4a60-d6659c8dcfff job-originating-host-name=localhost time-at-creation=1289542148 time-at-processing=1289542149 job-impressions=1 com.apple.print.PrintSettings.PMTotalSidesImaged..n.=1 com.apple.print.PrintSettings.PMTotalBeginPages..n.=1 Duplex=None PageSize=na-letter"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] argv[6]="/private/var/spool/cups/d00005-001"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[0]="<CFProcessPath>"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[2]="CUPS_DATADIR=/usr/share/cups"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[8]="CUPS_STATEDIR=/private/etc/cups"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[9]="HOME=/private/var/spool/cups/tmp"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[11]="[email protected]"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[12]="SOFTWARE=CUPS/1.4.5"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[14]="USER=root"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[15]="CUPS_SERVER=/private/var/run/cupsd"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[16]="CUPS_ENCRYPTION=IfRequested"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[17]="IPP_PORT=631"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[18]="CHARSET=utf-8"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[19]="LANG=en_US.UTF-8"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[20]="APPLE_LANGUAGE=en-US"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[21]="PPD=/private/etc/cups/ppd/iP4000R_00_00_85_4f_d4_8e.ppd"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[22]="RIPMAXCACHE=8m"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[23]="CONTENT_TYPE=application/pdf"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[24]="DEVICE_URI=file:///dev/null"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[25]="PRINTER_INFO=iP4000R (00.00.85.4f.d4.8e)"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[26]="PRINTER_LOCATION="
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[27]="PRINTER=iP4000R_00_00_85_4f_d4_8e"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[28]="CUPS_FILETYPE=document"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[29]="FINALCONTENT_TYPE=printer/iP4000R__00_00_85_4f_d4_8e"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] Started filter /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr (PID 4367)
    D [12/Nov/2010:00:09:10 -0600] [Job 5] JobManager converting file: /private/var/spool/cups/d00005-001 (7 args)
    D [12/Nov/2010:00:09:10 -0600] [Job 5] PrintJobMgr trying ppc architecture...
    D [12/Nov/2010:00:09:10 -0600] [Job 5] JobManager converting file: /private/var/spool/cups/d00005-001 (7 args)
    D [12/Nov/2010:00:09:10 -0600] [Job 5] fatal::internal error -9660
    D [12/Nov/2010:00:09:10 -0600] [Job 5] End of messages
    D [12/Nov/2010:00:09:10 -0600] [Job 5] printer-state=3(idle)
    D [12/Nov/2010:00:09:10 -0600] [Job 5] printer-state-message="/System/Library/Printers/Libraries/PrintJobMgr/Contents/ MacOS/PrintJobMgr failed"
    D [12/Nov/2010:00:09:10 -0600] [Job 5] printer-state-reasons=none

    Liz Gensheimer wrote:
    After upgrading to Snow Leopard, my Canon IP4000r printer will not work. I have tried both the Canon Printer Drivers 2.3 (my printer is listed) from Apple and the latest printer driver from Canon.
    The driver version provided by Canon is v10.26.x while the update provided by Apple will increase the version to 10.30.3.0. The v10.26 and v10.30 drivers provide all the features that the previous v4.8.3 driver for OS X 10.5 and earlier provided. However the layout for these menus is definitely different.
    Also, a lot of user who upgrade from a previous OS X may not realise that the default print dialog is in a minimised view. You need to press the disclosure triangle next to the printer name to get the expanded view.
    When I tried to print, I got "fatal::internal error -9660."
    I suggest you try a printer reset.
    1. Open System Preferences > Print & Fax
    2. Move your mouse over the Printers list
    3. Hold down the Control button and click the mouse
    4. Click "Reset printing system ..."
    5. Restart your Mac
    This will remove your iP4000R print queue but not the printer drivers. So you will only need to add the queue again.
    It looks like both drivers I've tried so far are CUPS (which is probably why all of the printer options are not supported).
    Yes they are both CUPS by name as they are both made by Canon. But this is not your issue. If you believe that a particular option is not available then please reply with what that is.

  • FireWire ports on display not working with Snow Leopard Mac Pro

    I just bought a new quad core Mac Pro with Snow Leopard and I have connected it to my three year- old Apple 23 inch cinema display and everything works fine....except for the Firewire 400 ports on the display. They no longer recognize my external iSight camera or external hard drives. And of course the devices will not connect to the computer's 800 ports. Anyone come across this, or have any solutions? I've tried connecting and reconnecting and have repaired permissions. Thanks.

    This means that my Firewire 400 ports on the display are no longer supported by the computer?
    They need a FireWire connection to the computer. With older computers, the FireWire cable from the display would plug in to a computer FW400 port to provide the connection. With FW800 only computers, you need the adapter.

  • Flash, Adobe Air, Time Machine, Safari not  working with Snow Leopard

    Really need some help with this.
    Did an archive and install of Leopard then installed Snow Leopard. No problems yet.
    90% of Video sites would not work. Uninstalled and reinstalled Flash. Uninstalled ShockWave, could not reinstall with 10.6.1.
    Attempt to install adobe air, received this message: "couldn't write the application to hard drive - please verify and try again." performed verify disk, disk permissions, repair permissions all ok.
    Attempted to install Air again, same message.
    Tried to use Time Machine to open Safari from a week ago, received message: I did not have permission.
    Using Macbook Pro, 2g memory, 80g hd, with 42g free.
    Backed up on ext. HD,
    Oh, one more, getting a lot of spinning wheels when using Safari that causes a lockup and hard re-start.
    I have an expensive piece of software that uses adobe air and I create videos for my business and I'm not able to do so now.
    Can anyone give me any ideas what I can do.
    Thanks,
    Z

    After a couple of days of problems with Snow Leopard and flash, safari etc... I figured out the problem is with my account.
    I created a new admin account and everything seems to be working. Well almost.
    a couple of things I've noticed are right clicking on dock icons does nothing, no option to quit or keep in dock.
    Apple Techs', had me change my account months ago to fix a problem with safari crashing. It didn't really work and more problems resulted.
    *So now my big question is: How do I move need items over to the new account.* I don't want to move everything over as I might bring what caused the problem in the first place.
    What I need are several apps,(like ilife, iwork, firefox, devonthink, 1password etc.) downloads, desktop, docs, files, and book marks.
    *What is the best way for me to do this?* Is there anything I need to do re: Snow Leopard on the new account?
    I feel like I have a new and functioning Mac again just around the corner.
    Looking for your help, thanks,
    Z

  • HP 7400 printer won't work with Snow Leopard.

    I recently updated my iMac to Snow Leopard and now I can't print to my HP OfficeJet 7400.  I know the printer works, as I can print from my laptop which is on Windows 7.  Any recommendations to get my iMac with Snow Leopard to print to my 7400?

    Have you downloaded the HP 10.6 printer drivers?  http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76195-1 &cc=us&dlc=en&lc=en&os=219&product=391194&sw_lang=

Maybe you are looking for