HP 8460P laptop how to replace touchpad

HP 8460P laptop   how to replace touchpad

If the notebook is within it's warranty contact HP for troublshooting and a service to replace if it is hardware.
Otherwise you would need to purchase the replacement touchpad from partsurfer.hp.com
A good place for part numbers and replacement information is the Maintence and Service Guide.
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c03253774/c03253774.pdf
I am an HP employee.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

Similar Messages

  • How to replace touchpad buttons? Hp hdx18 1010ea

    Hi
    I hope some one can help.... i have lost my left touchpad button on my HP hdx18 1010ea..My laptop is out of warranty and i cannot find any info on how to replace it or where to obtain the spare parts...I have spent ages on the HP site and it's useless i enter my part number of my pc then it confirms the model ..but then when i click parts i need it just goes back to asking my model number?..
    Hope some one can help...
    Robert
    This question was solved.
    View Solution.

    sasman1964 wrote:
    Hi
    I hope some one can help.... i have lost my left touchpad button on my HP hdx18 1010ea..My laptop is out of warranty and i cannot find any info on how to replace it or where to obtain the spare parts...I have spent ages on the HP site and it's useless i enter my part number of my pc then it confirms the model ..but then when i click parts i need it just goes back to asking my model number?..
    Hope some one can help...
    Robert
    Hi,
    According to a service manual, the touchpad is a part of the top cover. You have to replace whole top cover..
    Top cover part number: 496881-001
    Service manual: http://h10032.www1.hp.com/ctg/Manual/c01705400.pdf
    See page 71 how to replace it..
    http://www.amazon.com/gp/product/B004VEPK60/ref=as_li_ss_tl?ie=UTF8&tag=heaprcom05-20&linkCode=as2&c...
    Have look on ebay or use google to find the cheapest one..
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • Recently had to purchase a replacement phone a friend of mine had backed up the data on the lost phone to his Mac laptop how do I get that backed up data from the lost iPhone that's on his Mac laptop to my new replacement phone? Please give step by step

    recently had to purchase a replacement phone a friend of mine had backed up the data on the lost phone to his Mac laptop how do I get that backed up data from the lost iPhone that's on his Mac laptop to my new replacement phone? Please give step by step instructions xoxoxo
    And my iTunes sign in is also screwed up... It is underneath my friends email (the one with my backed up data on his Mac laptop) HOW DO I CHANGE THIS SO THAT I CAN DOWNLOAD APP's again...

    I suspect unless he had some items in iCloud backup then they are gone.  Connecting an iPhone to a different library from that to which it was previously connected will result in the device asking if you want to erase it.

  • How to replace HP G62 model Laptop keybaord?

    Hi,
    Couple of my Laptop key's are not working (key-B,N,CAPS,F12,etc)..may i know the exact reason?as i try yo restore my lapotp with one month back date but its not working.If any troubleshoot steps i can do it please share me.otherwise please let me know if how i can replace the laptop keyboard.please let  me know the details method of methods step by step method i can do my self to avoid engineer's visit in my house.
    regards
    vinod

    HI,
    Welcome to the HP Forum.
    262220 wrote:
    Hi,
    Couple of my Laptop key's are not working (key-B,N,CAPS,F12,etc)..may i know the exact reason?as i try yo restore my lapotp with one month back date but its not working.If any troubleshoot steps i can do it please share me.otherwise please let me know if how i can replace the laptop keyboard.please let  me know the details method of methods step by step method i can do my self to avoid engineer's visit in my house.
    regards
    vinod
    Keys normally stop working because of spillage of  sticky substance (coffee, sugared tea, etc.) that causes the key to no longer move as it should.
    Here is a video that shows how to replace the keyboard.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • How to replace screen on dv7-4191nr Hp laptop

    Folks,
    I hope somebody can help. My screen cracked on my dv7-4191nr hp laptop. I bought a new screen but can't figure out how to replace it. Ant suggestions on how to replace the screen?
    Thanks

    Hi
    Please find the manual link given below check page 72 Chapter 4 Removal and replacement procedures.
    Link
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • How to replace the top of my laptop due to it being broken on

    MY SCREEN BROKEN AND THE TOUCH SCREEN SO THE TOP NEEDS REPLACEING WHICH I HAVE GOT ONE JUST NEED TO KNOW HOW TO REPLACE IT

    Here is your Service Manual:
    Manual
    It is all in there. See page 55 in particular.
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • Need to replace Touchpad (Current Synaptics ps/2) for Compaq Presario F761US p/n KP029UAR

    Touchpad is starting to fail (cursor jumping and not registering taps) have contacted HP parts and HP Buy sent me to tech support to find compatible and ended up here.  Can Anyone direct me to a replacement internal touch pad to replace mine?

    The best place to find parts is going to be ebay. The touchpad is removeable from the top cover and replaceable and here is the part for $13 on ebay:
    http://www.ebay.com/itm/Laptop-Part-Compaq-F500-F700-Touchpad-assembly-with-ribbons-and-buttons-TEST...
    Service Manual:
    click here to download Manual
    Page 63 starts instruction for removal of the Top Cover. The manual does not show how to replace the touchpad as a separate part but it is removable from the underside of the top cover. You can also replace the whole top cover which is officially the way to fix it. Let us know if you need more help.

  • Lost my laptop, how do I transfer all media from phone to new pc?

    Lost my laptop, how do I transfer all media from phone to new pc?
    cheers

    By design, the iphone will sync itunes content with one computer at a time. Any attempt to sync such content with a second computer will result in ALL itunes content being first erased from your phone & then replaced with the content from the second computer. This is a design feature and cannot be overridden. Because you are replacing your computer, your phone will see this computer as a "new" computer. The itunes content sync is one way: computer to phone. If you have photos that were synced to your phone or music ripped on your own that were not backed up, you will first have to extract them from your phone using third party software, before you do anything else, as Apple makes no provision to do so:
    http://www.wideanglesoftware.com/touchcopy/index.php
    Once you've done that, do the following in the order specified:
    1. Disable auto sync when an iPod/iPhone is connected under Preferences>Devices in itunes(under the edit menu if using Windows).
    2. Make sure you have one contact & one event in the supported applications(Outlook, Windows Address Book) on your computer. These entries can be fake, doesn't matter, the important point is that these programs not be empty.
    3. Connect your phone, iTunes running, do not sync at this point.
    4. Store>Authorize this computer.
    5. File>Transfer Purchases(To make sure all purchased content on your phone will be in your itunes library).
    6. Right click in the device pane & select reset warnings.
    7. Right click again and select backup.
    8. Right click again & select restore from backup, select the backup you just made. When prompted to create another backup, decline.
    9. This MUST be followed by a sync to restore your itunes content, which you select from the various tabs, You'll get a popup regarding your contacts & calendars asking to merge or replace, select merge.
    You should be good to go.

  • How to replace hard drive and transfer everything over?

    I've looked everywhere but am unable to find a definitive guide on how to do this.
    Currently I have an early 2011 MBP that came with Snow Leopard and upgraded to Lion later. It has an HDD and I want to replace it with an SSD and transfer everything over to the SSD. Considering Lion created a Recovery partition (and there is also an EFI partition), I'm confused on how to do this the best way to basically copy my current hard drive to the new SSD.
    The best I've figured out is to connect the SSD with a SATA-USB cable, use the Lion Recovery Disk Assistant ( http://support.apple.com/kb/dl1433 ) to create a Recovery partition on the new SSD, then, booting into Recovery, install Lion on the new SSD, and then use Migration Assistant to transfer all my files over.
    Is there a simpler or better-explained way to basically copy my current hard drive over to a new SSD and then remove the HDD and use the SSD?

    How to replace or upgrade a drive in a laptop
    Step One: Repair the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Step Two: Remove the old drive and install the new drive.  Place the old drive in an external USB enclosure.  You can buy one at OWC who is also a good vendor for drives.
    Step Three: Boot from the external drive.  Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears.  Select the icon for the external drive then click on the downward pointing arrow button.
    Step Four: New Hard Drive Preparation
    1.  Open Disk Utility in your Utilities folder.
    2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Step Five: Clone the old drive to the new drive
    1. Open Disk Utility from the Utilities folder.
    2. Select the destination volume from the left side list.
    3. Click on the Restore tab in the DU main window.
    4. Check the box labeled Erase destination.
    5. Select the destination volume from the left side list and drag it to the Destination entry field.
    6. Select the source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    Destination means the new internal drive. Source means the old external drive.
    Step Six: Open the Startup Disk preferences and select the new internal volume.  Click on the Restart button.  You should boot from the new drive.  Eject the external drive and disconnect it from the computer.

  • Qosmio G50-10J: How to replace the Optical Disc Drive (ODD)?

    Hello there,
    the optical drive of my Qosmio G 50 is not working properly anymore, it reads only some movie-DVDs, but sadly no videogameDVDs at all, so I cannot instal any games.
    The warranty has already expired too. So I wanted to ask if it is possible to change the drive myself, if it is then how should I do it, and if by doing it would the laptop be in
    serious risk of getting damaged?
    I would be very thankful for every tip and every help you guys can give me!!!
    Best regards,
    a.z.

    Hi
    In different cases the ODD replacement is not very tricky.
    If you want you can check this forum category.
    Here you can find some videos how to replace the ODD on different notebook models:
    http://forums.computers.toshiba-europe.com/forums/forum.jspa?forumID=115
    Here is also a nice Youtube channel which provides the instructions how to replace the ODD:
    http://www.youtube.com/user/toshibaeuropesupport
    But maybe the ODD laser lens is dirty. In my case I could solve similar issue cleaning the laser lens using a cotton-wool tip and alcohol.
    But be careful doing this!

  • How to use touchpad to highlight,copy and paste?

    HP ENVY laptop    how to highlight text or message using the HP single  touchpad>I want to select words or phrases ,then copy(CTL C),then CTL V to paste?
    Thanks

    Just press down on the touch pad and swipe across to highlight

  • How to replace battery in 15" macbook pro?

    How to replace battery in 15" MacBook Pro? how to charge new battery.

    See these articles:
    About Batteries in Modern Apple Laptops
    Battery University
    Apple - Batteries - Notebooks
    Apple - Batteries
    Extending the Life of Your Laptop Battery
    MacBook and MacBook Pro- Mac reduces processor speed when battery is removed while operating from an A-C adaptor
    Apple Portables- Calibrating your computer's battery for best performance
    Mac notebooks- Determining battery cycle count

  • Identiying what screen I need to replace a screen on a hp630 and how to replace

    Hi
    I have a hp530 which needs the screen replaced. I have the Product No: A6E95EA#ABU.   #could possible advice me on the part number for the following:
    Part number with enclosure and wireless components
    Part number of RAW lcd panel
    And also instructions and how to replace the screen
    Kind regards
    Zara

    Here is the Service Manual which will answer all your questions:
    Manual
    The whole lcd unit with wireless cables is 440716-001 and the panel is 440711-001
    If you open up the display housing and get the screen model you can also have a lot more choices in finding a lower cost replacement. It is a 15.4 inch lcd screen....very common and relatively inexpensive:
    http://www.ebay.com/itm/HP-530-DV6000-DV500-LCD-Screen-15-4-N154I2-L02-REV-C2-Laptop-Tested-/2308974...

  • Satellite Z830 - how to replace broken Screen?

    A careless family member has succeeded in cracking the screen of a fairly new Toshiba z830. It's broken quite badly, so I doubt it will be reparable.
    I was wondering if anyone could offer any advice on the best way to go about getting a replacement, bonus points for any information in the Melbourne area.
    Thank you

    I'd rather not pay the $459 or 459 or whatever to get the screen fixed by Toshiba. I've had 20 laptops before, I never cracked a screen like this so easily. I didn't drop the laptop nor bump it nor squeeze it, I just transported it in my hand baggage on the airplane as I always do with many previous laptops, the Z830 screen is too fragile. I really like the screen, I like its matte finish, I like the thin and light magnesium form factor of the laptop, and swobbly screen does not bother me, except the design is just much too fragile, the glass surface of the LCD is not protected as it must be. I'm the one who video-blogged this interview with a Toshiba representative about that nice design afterall: http://www.youtube.com/watch?v=z_Cq07Ee89o
    Since I don't want to pay the $500 repair fee, and since I guess Toshiba never replaces a cracked screen under warranty? I need to know if it'll work if I buy this screen: http://www.laptopscreen.com/English/model/toshiba/PORTEGE~Z830-S8302/ and I need to know exactly what screw driver I need and if there is a YouTube video and/or tutorial with detailed images and explanations so that I can hopefully safely make the screen replacement myself. And thus so that I can do it for about $100 myself instead of paying Toshiba $500 to make it.
    I guess it'd be best if Toshiba actually sold that screen and the necessary screw driver to DIY change a broken screen (loose warranty is ok then), does Toshiba sell the screen replacement and screw driver for Z830/Z835?
    I also tried http://screensurgeons.com/ and http://youtube.com/ScreenSurgeons/ but they don't seem to have made a video showing how to replace the Z830/Z835 screen yet.
    If you look at the comments on this video http://www.youtube.com/watch?v=hMH0r76zdt0 about the Z830/Z835 teardown (only to replace RAM or SSD), there are several comments from users who also cracked their Z830/Z835 screen but I can't seem to find on YouTube a video showing how to replace the screen yet.
    Thanks for your help. I'd like to buy that screen replacement soon, I need this laptop screen fixed before I go on a travel on October 11th.

  • Left command key has broken off - how to replace?

    So a few days ago I caught my left command key with my nail and the top half of it lifted away from the mechanism underneath. I pressed it until I heard it click back into place and then merrily continued using my computer as usual. Today I was typing and the whole thing just came off under my thumb, which is annoying to say the least.
    The biggest issue is that as I was trying to reconnect key to mechanism, the little criss-cross doohickey came off as well! I am left with a little silicon nipple which, while titilating, is not really conducive to the kind of high volume typing I'm used to!
    I really don't want to pay 40 bucks to get Apple Support to replace a single key for me - I just need to know how to do it myself. It's only one key and I could probably learn to get used to using the right one, but it would be easier if I could just click it back into place. It's not broken, the mechanism itself seems fine and the key works if I push the little nubbin, so I'm not concerned about that. I just think $40 is too much to pay someone to click a key back into place! I wasn't even doing anything out of the ordinary with it like trying to remove or replace the keys T^T
    I'm especially gutted since I just bought a new iPhone from the same Apple shop I bought my laptop like three days ago - if I'd known my laptop was gonna bust I'd have saved myself the money and spent it on repairs instead! Fml, right?
    Any help you folks can offer would be very gratefully received - if it comes down to it and I have to fork out the money then I'll do so, but I'd like to explore community options first on the off chance that someone knows how to replace the mechanism and key without having to lug my computer all the way into the city to get it fixed xD
    Thanks in advance!
    Ehryn

    It's pretty easy to do, get something thin like a credit card and run it along the bottom and sides of the keyboard and there are several bracket things that will pop the keyboard up when you pressure them. There will be a couple of cables to clip out behind it so lift it up gently.
    You should be able to find a video on youtube anyway!
    Try this site for the keyboard http://www.replacementlaptopkeys.com/toshiba_qosmio_laptop_key.html
    It shouldn't be too hard to track a replacement down.

Maybe you are looking for

  • Using a ethernet external Maxtor Hard Drive (Network Attached Storage)

    Does anyone know if I can use a NAS (Network Attached Storage - in this case a 1 Tb Maxtor external drive with ethernet connection) and have my iMac G5 and Macbook backup to this drive on the same ethernet segment using Time Machine ? (both computers

  • More than one PGI for STO/Sale order

    Dear All,          When doing PGI for a STO or Sales order that having many no.of items, more than one PGI is created for the same STO or Sale order. My doubt is How the system takes the material in each PGI whether there is any logic behind this or

  • Archiving object MM_MATBEL.

    Hi, I need to archive data using archiving object MM_MATBEL. Now the condition is that in this archiving object, I need to restrict the data (to be archived) to company code 1030 (country US). As the company code field is not available in the selecti

  • Can't import some Quicktime files into FCP X 10.0.5

    I'm new to FCP X.  Trying to import Qiicktime files from hard drive and keep getting "no supported files" dialog box.  Or sometimes it imports audio only. Only once was I successfully able to import video files.  All of the files were originally crea

  • Displaying text from XML.

    Hello, I hoping that somone can steer me in the right direction here. Right now I have an application that reads an XML and displays thumbnails of images. A user clicks on the thumbnail and a larger image appears. What I would like to do is, instead