HP 8500 all In One premier printer 909

I have a Hp officejet all in one premier 909 wireless printer. I try touse my Ipad but it can;t find the printer. The manu to connectal states that the printer is applicable. Help please

Hey there! Sorry to hear about your issue. Check the list below to see if your printer is supported:
iOS: AirPrint 101
If it is listed use the tool to troubleshoot the issue: AirPrint Setup and Troubleshooting
Hope this helps!
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

HP 8500 All In One COLOR print issues

My all in one will not print in color, I have just replaced all of the cartridges and even ran a TEST page and all other available diagnostic functions with no success. I also checked the print options to be sure COLOR was selected and everything including the print test comes out in BLACK only. Even the color level test prints in BLACK for all cartridges ...
Any suggestions on this issue.
I have tried printing documents from Word, Publisher and every other program with no success.
Thank you!
Glen Bigness, P.A. Realtor

hi,
It seems to me that there could be a problem with the Magenta/Cyan Printhead of your printer. Try to perform the steps of cleaning the contacts of the printhead and of the printer, click here. After cleaning the contacts, try to print a diagnostic page to see if your printer will now print color. If issue persisted, then i believe you need to replace the Magenta/Cyan printhead.
Contact HP tech support at 1-800-474-6836 for any suggestions regarding this matter, they might be able to replace the printhead of your printer if your machine is still under warranty.
Hope these would help you!
Kiko

HP 8500 ALL IN ONE - CAN NO LONGER SCAN TO SHARED FOLDER

I have had an HP 8500 all in one scanner / printer for a while and have not had any problems with,
Yesterday the printer hung so I reset it.
I am using ethernet (wired) as opposed to wireless.
When I reset the printer it gave it a new ip address of which I reconfigured back to the address of my network ie 192.168.7.xxx
I am able to print and scan from the embedded printer web page but when I scan to my shared folder, the printer cannot conect.
Does anyone have any ideas?
I think it may be something either to do with the network path or possibly the sharing permissions fo the network folder.
Thank you in advance for any assistance that can be provided.

Hello there @DAVIDA64, welcome to the forums
I read through your post about the issues you are having with scanning to your network folder. My best suggestion would be to check out the guide below and set up your scan to network folder again.
HP Officejet Premier 8500 (A909n) and Wireless 8500 (A909g) All-in-One-Printers - Set up and Use Dir...
Best wishes, have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Paper Jam error message due to broken gear on Officejet Pro 8500 all-in-one printer

3 year old HP Officejet Pro 8500 all-in-one printer (haven't used it much). Keeps telling "Paper Jam" although there is no paper jammed anywhere (searched meticulously with a flashlight after watching HP's tutorial videos on how to clear paper jams). I started searching on the Internet and found a couple of related videos on Youtube that pointed me in the right direction:https://www.youtube.com/watch?v=PMFW1RRlDHEhttps://www.youtube.com/watch?v=EwbF2Vs_0gQ I could hear a clicking noise on that area of the printer each time I turned it on, so I carefully took the black cap apart that was hidding the gear, and confirmed I had the same problem as in the youtube videos above. See picture below showing the white plastic gear part that has a large crack which causes the Paper Jam error message and renders the printer unusable. After Googling a little bit, seems like a relatively common issue and wonder why such a part like that is not made of a stronger material like metal (planned obsolescence maybe?). Does anybody know if there is a way of replacing the broken gear? (I really care for the environment and I would like to avoid having to throw the relatively new and expensive all-in-way printer away) Thanks a lot in advance for the advice!

Hey , Thanks for posting in the HP Support Forum. I do see that a cracked gear in your HP Officejet Pro 8500 All-in-One Printer is impeding all functionality. I would like to help you with this but that particular part is not replaceable. I recommend you reach out to our tech support team to find out what servicing options you have available. You can click on the following link to initiate a case: www.hp.com/contacthp/
Once you fill out the online form to create your case you can choose from different direct contact methods. I hope this helps. Regards,

Print Too Small from Photoshop CS4 with HP 8500 All In One Printer

I'm running Windows XP with CS4 and latest patches and drivers. When I print an image to my HP 8500 All in one printer, the printout is too small. Instead of a centered 4 x 6 image on the page I get a 1 x 1-1/4 inch small print of the image in the upper left hand corner.
I re-installed CS3 and it works perfectly as do any other print options, such as word, etc. But from Photoshop CS4 I can find no way to print to this printer without the image shrinking in size. If I print to another printer at the same sitting, the image is fine. So it's a PS CS4 vs. HP 8500 unique problem I guess.
I've see this post in other forms and no help as yet. Does anyone have this one on their radar. I really like this printer, but it's quite annoying.
By the way, If I print to a PDF from PS CS4, the pdf file image is fine. That's another end around for printing also. HMMMM.
I did contact HP and they put the problem squarely back on Adobe. No partnership there.
Thanks,
Glen

Will the printer print from any app?
I know it sounds like a dumb question, but you didn't actually say... And I admit to looking for software problems on an occasion or two when I had forgotten to plug in cables.
-Noel

HP 8500 All in One prints reddish color

My HP 8500 All in One Deskjet has started to print in all reddish color even though the cartridges appear full. I have run a cardridge head clean and a cardridge align and if I'd rather put my head through a plate glass window than have to talk to HP today.
Does anyone happen to have any recommendations on this and was there a dedicated place to post Mac Printer questions with the new interface?
Also, does anyone know how I get to set the Print Page to all black and white? I can never seem to find these kinds of things in the Printer Config now that I have converted to Mac for some reason.
Thanks.

hi,
It seems to me that there could be a problem with the Magenta/Cyan Printhead of your printer. Try to perform the steps of cleaning the contacts of the printhead and of the printer, click here. After cleaning the contacts, try to print a diagnostic page to see if your printer will now print color. If issue persisted, then i believe you need to replace the Magenta/Cyan printhead.
Contact HP tech support at 1-800-474-6836 for any suggestions regarding this matter, they might be able to replace the printhead of your printer if your machine is still under warranty.
Hope these would help you!
Kiko

Why is my computer telling me to turn ON my HP officejet 8500 all in one? It's ON!

My HP officejet 8500 all in one printer is powered on. The fax and copier are working but when I try to print my computer (windows 7 pro 32bit) tells me to power on my printer. I had trouble with my DSL internet server yesterday and installed a new modem w/ router from at&t and my printer runs through a netgear prosafe port switch. I had to reboot everything to get the internet up on my PC. the printer worked fine before the internet and hardware trouble. I have tried wiring it directly to the PC with the USB cable and it gives the same error. I have rebooedt, unplugged computer and printer over and over.

Turn the printer off. Hold # and 6 keys while and a bit after turning it back on. This will reset the printer.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I have a hp C410 all-in-one series printer. When I updated to 10.8.1 it was no longer supported. HP told me to go to the Apple system updates and download an installation program. I can't find that program in my Apple updates file.

I have a hp C410 all-in-one series printer. When I updated to 10.8.1 it was no longer supported. HP told me to go to the Apple system updates and download an installation program update. I can't find that program in my Apple updates file. Please help.

From the HP Support site, this may help:)
"Re: Problem with latest HP software update for Mountain Lion and HP Photosmart Premier C410.
Options
08-10-2012 10:54 AM
Download and install this: http://support.apple.com/kb/DL907
Reset the printing system:
- Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it."
Hope this helps

8500 all in one color not correct!

my red color is pink

Hey @big-bob1,
Welcome to the HP Support Forums!
I understand that you're experiencing a print quality issue when printing from your Windows 7 to your HP Officejet 8500 series printer. I would like to assist you today with resolving this quality issue. However, in order for me to provide you with accurate troubleshooting steps today I do need to verify which Officejet 8500 series printer you have:
1) HP Officejet Pro 8500 All-in-One Printer Series - A909
2) HP Officejet Pro 8500A e-All-in-One Printer Series - A910
If you're not sure which series of printer you have, please click here for instructions on how to locate your printer model number.
In the meantime, you will need to follow the Print Quality troubleshooting steps to resolve this issue. Once you determine which Officejet 8500 series machine you have, please follow the appropriate Print Quality troubleshooting steps below.
If you have the HP Officejet Pro 8500 All-in-One Printer A909 Series, please click here and run through the quality troubleshooting provided.
If you have the HP Officejet Pro 8500A e-All-in-One Printer A910 Series , please click here and run through the quality troubleshooting provided.
Please respond to this post with the result of your troubleshooting. Should the issue persist, be sure to include you exact printer model number in your response. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Can I share HP PSC 1610 All-In-One series printer through Bonjour?

I have an iBook G4, and a Mac Mini (10.4.11- Tiger) with a HP PSC 1610 All In One series printer connected to it by USB. On my iBook G4, the printer comes up under Shared Printers in the Printer Setup Utility but when I click on it, and press Show Info it freezes.. so I was wondering, is there a way to connect to the printer wirelessly with the correct driver (because the driver doesn't show up in the driver list... and the driver is installed.)

Hi my printer psc 1610 hp not picking paper

Hp - photosmart e-all-in-one wireless printer cn731a- nothing prints??

HP - Photosmart e-All-in-One Wireless Printer (CN731A)
Went through setup on Windows 7 64-bit, printed the test photo, came out great. Thought everything was good to go. Later, when trying to print a document, it wouldn't print. Computer popped up a message saying "Successfully printed" but when I went to the printer, there was nothing there. I tried running a wireless network test on the printer's screen, and once that page printed with the results, immediately after that, the document I was trying to get finally printed. This was an early Christmas gift for my parents, & my mom just informed me that she tried to print again today, but nothing happened on the printer. I am out of town now and am not able to troubleshoot on my own on the printer like I did a couple days ago so came here for advice.. Any idea what the issue might be? Did I maybe miss a step after doing the test print of the photo? Any ideas would be appreciated!

Hello,
Try the below steps ..
While the printer is ON, Unplug the power cord from back of the printer.
Disconnect all the cables that are connected to the printer.
Wait for 30 seconds.
Plug in only the Power Cord. ( Printer would Power on ).
Try making a standalone Color copy of a document . If it fails to print a copy, then it could either be an issue with the Ink cartridges or the Printer .
Regards,
Jabzi
Help the community by marking this post .
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!
I work for HP
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

The HP C4480 all in one series PRINTER that I got free with my i-Mac is printing TINY print despite that my computer is set at 13 font Helvetica. How to reset the printer to normal print?

The HP C4480 all in one series PRINTER that I got free with my i-Mac is printing TINY print despite that my computer is set at 13 font Helvetica. How to reset the printer to normal print?

Is the Paper Size: set to US Letter and Scale: set to 100%
Dennis

Problem with drivers for HP B109 a-m all-in-one, have printer working but not scanner in windows 8

Still have a problem with the drivers in Windows 8 release preview, for my HP B109 a-m all-in-one, have printer working but not scanner, is there any chance of a fix before final release of Windows 8 ?.

Review my post here:
http://h30434.www3.hp.com/t5/Windows-8-Release-Preview/SOLUTION-Get-Win-7-Printer-Drivers-HP-Solutio...
And see if something similar will work for you.

I cannot get my HP officejet 4215 all-in-one to print graphics

how do i get my HP officejet 4215 all-in-one to print graphics. as an example if i print my visa statement the visa logo and bank logos don,t print

bamajim,
Here is a link to a page for your printer that may help with your issue.
The document provides steps to troubleshoot printouts that do not match the screen while printing from the web.
Does this also happen when printing graphics from somewhere other than the web ?
Once you give these steps a try let us know what happens.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Can my hp photosmart all-in-one 7200 printer connect to ipad 2 via bluetooth?

I have a hp photosmart all-in-one 7200 printer with a hp blue tooth dongle. It works well with my cameras, but I cannot get my ipad 2 to recognize the printer.

Hi,
Printing via Bluetooth from an iPad is not possible due to iOS limitations, as Apple did not include the Bluetooth printing protocol in the iOS.
If your printer is HP Photosmart C7200, you may use the HP ePrint Home & Biz App to print from your iPad through your home network
However for the Officejet 7200 your only option is to look for any available 3rd party printing solution from the App Store.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP 8500 all In One premier printer 909

Similar Messages

Maybe you are looking for